Position: Civil / Structural Engineer - Offshore. Contract: On Permanent Role. As Structural Engineer, you are responsible for the engineering design ensuring your design is in compliance with international codes, Company specifications, and industry standards and regulations. You must be able to properly translate your engineering design into drawings, data sheets, and other documents and also prioritize assigned activities and collaborate with the Discipline Lead, multiple internal disciplines, and external parties to deliver a safe, efficient design that can be manufactured meeting project requirements. We re hiring Civil/Structural Engineer - Offshore for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Bangalore . Academic: Bachelor/Master of Technology Civil/Structures Experience: 5- 10 years relevant experience in the offshore Oil Gas industry with specific experience on Detail Engineering of Structural Analysis for Offshore Oil and Gas facilities Wellhead platforms, Fixed Process Platforms, FPSO topsides modules Turret Mooring System. SW or tools: Sesam GeniE /SACS(Mandatory) FEMAP, STAAD-Pro (Optional)

Position: Building Information Modeler - Autocad Plant 3D Contract: Permanent Role. The AutoCAD Plant 3D Mechanical / Process BIM Modeler is expected to perform variety of design/3D modelling/drafting activities including, but not limited to preparing and updating 2D plans and sections, 3D equipment modelling, pipeline modelling and layout, orthographic generation, isometric extraction including support detailing, bill of material take off, etc. Duties Responsibilities: Should be proficient using AutoCAD Plant 3D in following areas: Ability to read and understand PIDs Mapping PIDs to Plant 3D piping modelling Equipment modelling, Piping Support modelling/codes etc. Pipeline modelling and layout Isometric extraction (for fabrication) Orthographic generation Knowledge of specification and catalogue editing/new development Bill of material take off Must be able to perform Clash Detection using Navisworks or BIM 360 Knowledge of Water/Wastewater treatment process and function of units Knowledge of Navisworks Manage clash detection Knowledge of vessel / valve data sheet Knowledge of standard pressure vessels, pumps and blowers Knowledge of various types of valves and Instruments Knowledge of various pipe material specifications and standards Knowledge of Civil 3D and REVIT MEP will be advantageous Integrating with other BIM software such as Civil 3D, Revit MEP, Navisworks Manage and Auto Plant 3D Co-ordinating with other disciplines like Civil, Instrumentation, Structural, Electrical, etc. both in India and abroad Proficiency and understanding of civil, Mechanical Point Cloud drawings Implement innovative approach to reduce drawing production cost and hours Efficient use/plugins for integrating other applications (Bentley Auto Plant 3D, Revit MEP etc.) to generate drawings based on specific project requirement Ability to define problems, collect data, establish facts, and draw valid conclusions Attending client coordination and review meetings, preparing and presenting project status updates and supporting Project Lead/Team Lead in engineering related tasks Implement safety and quality aspects into design Travel abroad or to other offices in India for projects and assignments etc. We re hiring BIM - Autocad Plant 3D for one of our Leading MNC in Infrastructure to join their growing team. This position is based out in Bangalore/Chennai/Pune. Minimum Qualifications: BE or Diploma in Mechanical Engineering (Preferred) Autodesk AutoCAD Plant 3D Certified Professional Minimum 8+ years of relevant experience in P3D is essential Excellent written and oral communication skills Ability to work independently and with a team Experience with International projects will be an added advantage

Position: Building Information Modeler - Structural Contract: Permanent Role. Production of high-quality 3D BIM Models in Revit Performs a variety of moderately-difficult to difficult 3D CADD modeling assignments under minimal to moderate supervision, which requires the application of standard CADD modeling techniques and at times, accepted engineering formulas in accordance with the company s established standards and procedures. Coordination with Design Engineers for the information required to prepare BIM models and generate drawings. Should have strong 3D visualization capabilities. Incumbent will utilize various CADD modeling /design techniques per Company CADD and/or client provided standards. Should have ability to work independently within a project team. Immediate supervisor provides direct technical guidance for unusually difficult assignments. Collaborate with other designers, engineers and architects and clients to convert information into layout designs, drawings and models using REVIT and AutoCAD. Decipher information received from various formats (sketches, BIM Execution Plans, Architectural drawings, Experience within infrastructure especially WTP-WWTP /industrial projects is a plus. Should be interested and able to work in an international environment. We re hiring BIM - Structural for one of our Leading MNC to join their growing team. This position is based out in Bangalore/Chennai. Minimum Qualifications Degree/ Diploma in Engineering with vocational technical training in CADD modeling technology and 3D modeling technology with 6+ years of related experience (or equivalent working knowledge/experience). The incumbent must possess a strong working knowledge of core 3D CADD applications (such as Revit, Civil 3D, AutoCAD 2D/ 3D), as outlined above. Must have proficient knowledge in handling Revit and other BIM application tools and concept of BIM. Capable of producing Revit plans, sections, elevations, details, schedules etc. must be familiar with all Revit tools and creating and editing view range, drafting views, view templates, system families, materials, project/shared parameters, multi-category schedules, project title blocks, worksets, Revit category-based profile, annotation families etc., must be capable of link multiple Revit files and work. Capable of handling Revit projects without any guidance from the superior and managing the tasks with sharing the work with others. Must be capable of performing Clash detection using Navisworks and Revit interference check, export Clash reports, review clash reports etc. Create Dynamic Blocks with parameters Use different 3D representations such as shading, conceptual etc. Export 3D geometry for use by subcontractors and outside agencies. Assist in the production of producing 2D sheets (plans, sections, 3D clips and details) from 3D/4D multi-discipline models under close supervision from senior 3D Modeling staff (Transitional 2D techniques) Complete other duties as assigned appropriate for the designated grade level. Preferred Qualifications Degree/Diploma in Engineering. Experience with Architectural / Structural/ Mechanical drawings, developing equipment layout and site plan drawings. Experience in leading the modeling related tasks and coordinating with client to get the deliverables completed on schedule and budget.

Position: Engineer Utilities Solvents Contract: On Permanent Role. Required Skill Set: Excellent verbal and written communication skills with success in building trustful relationships and influencing others in cross functional areas including customer management Experience in Pharma, Biotech industry is a must. Coordination with other disciplines conducting design review for engineering activities. Have experience in the perform the Gemba / quality checks for the required discipline. Estimation of Generation Capacities for Utility (Clean, Black, CIP, Waste Exhaust), Gases and solvents Prepare URS for Utility (Clean, Black, CIP, Waste Exhaust), Gases and solvents generation skids/equipment Distribution package Knowledge in Defining concept, designing, sizing and testing of clean black utility systems and process gases Solvents and distributions systems on both existing and new facilities. Experience with regulatory requirements, authority applications, GMP impact and calculation of energy consumption. optimization of design solutions to meet specific project technical commercial requirements. Prepare, Evaluate Finalize the tender for the utility Solvents packages. Have experience in qualification of the vendor and equipment (validation life cycle) Have experience in Planning Estimation of the project deliverables in the different phase of project. We re hiring Engineer Utilities Solvents for one of our Leading MNC to join their growing team. This position is based out in Bangalore. BE / B. Tech or M.Sc. / ME / M. Tech in Mechanical, Chemical or equivalent, with relevant experience 6 12 Years Experience require. Must have experience in CD, BD, DD Construction phases of project execution. Must have good knowledge of the current relevant Engineering Pharma legislation / regulations / guidelines / standards. Knowledge/ work experience in MS VISIO, AUTO CAD, NAVISWORK are preferred.

Position: Lead Engineer - SLP Contract: On Permanent Role. As SLP Engineer you develop safety and loss prevention deliverables and studies, ensuring that they are technically correct, issued on schedule, communicated documented property. Such deliverables may include: safety concept and basis of design. fire protection basis of design; hazardous area classification schedule and layouts; escape route drawings; loose firefighting equipment; hydraulic firewater calculations; Quantitative Risk Assessment (QRA); Fire Explosion risk analysis (FERA); Escape, Evacuation and Rescue Analysis (EERA); Smoke, toxic gas and hydrocarbon gas dispersion; etc. We re hiring Lead Engineer - SLP for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Bangalore. Academic : Graduate in Chemical / Fire Safety / Mechanical Engineering Exp: 15+ Years. SW or tools: PIPENET/PHAST.

Position: IM-KM Contractor (Information Management and Knowledge Management) Contract: 6 months + 6 months; to be reviewed periodically Close collaboration with and support to IM-KM Advisor Strategy Excellence Declassification of MC and Confidential documents, with initial focus on IGU DSR Labelling of documents and support NRD process, with initial focus on IGU DSR Migration of declassified (other relevant) documents to archival folders on SCoP Hub Migration of documents from old to new SharePoint As advised by IM-KM Advisor, support MC SharePoint creation and closure. We re hiring IM-KM Contractor for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Bangalore. Education: Bachelor s Degree Total Years of Experience: 2 Years Knowledge of SharePoint and file management, with past evidence Awareness of broad principles of knowledge and information management Analytical proficiency Good communication skills

Position: Sr. Data Scientist. Contract: On Permanent Role. We are looking for an experienced Data Scientist with expertise in Generative AI and Large Language Models (LLMs) to join our innovation team. In this role, you will work at the cutting edge of AI technologies, leveraging LLMs to develop intelligent applications that can generate, analyze, and process text data. You will collaborate with data scientists, machine learning engineers, and product teams to build and deploy state-of-the-art AI solutions that solve complex real-world problems. Programming Python GenAI Technologies understanding evaluation LLM-LMM integration, Optimization, Deployment RAG, Knowledge graphs, transformers AWS Bedrock We re hiring Sr. Data Scientist for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Education: Any Engineering Total Years of Experience: 03 to 08 Years

Position: Technical Author Contract: On Permanent Role. Create/revise CMM as per requirements Detailed analysis of ATP, Engineering Drawings, FEE, SB/SLs, TRs Authoring of manuals with PTC Arbortext and CSDB Tools Expertise on S1000D and Ispec2200 Mentoring the new team members Analysis of MRO/Operator queries and preparing the documentation changes We re hiring Technical Author for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Education: Any Engineering Total Years of Experience: 03 to 05 Years

Position: Senior Design Engineer Contract: On Permanent Role. This is a technical design engineering role focusing on Solar Photovoltaic (PV) renewable solutions. The position involves both pre and post sales design engineering activities, aimed at delivering the most optimal solar PV solutions to clients. You will report to the CEO and collaborate closely with the commercial, bid proposal management team, contributing the Engineering, Procurement, and Construction (EPC) details for projects related to ground mounted solar PV systems. Roles and Responsibilities: Project Proposals Design: Prepare proposals, plan, and design new solar projects. Engineering Documentation: Analyze data and prepare detailed engineering documents and drawings. System Design: Develop AC and DC Single Line Diagrams (SLDs), cable sizing, cable scheduling, and provide inputs for module and Balance of System (BOS) selection. Off grid On grid Systems: Responsible for designing off grid, on grid, and utility scale systems, especially those with a minimum voltage of 33 kV. Tender and Estimation Support: Provide estimation, sales support, and tendering assistance for new solar projects and design requests. Collaboration: Engage with the site team, internal stakeholders, EPC contractors, and clients to ensure timely project delivery. Solar PV Electrical System Design: Design electrical systems for solar PV projects (DC AC system, LV, HV, EHV Substation / Switchyard / Transmission). Knowledge of PVSyst software is preferred. Standards Compliance: Demonstrate expertise in IEC, IEEE, and IS standards. Project Design Experience: Have experience designing a minimum of 5 MW AC single plants and cumulative solar capacities of at least 50 MW. We re hiring Senior Design Engineer for one of our Leading MNC to join their growing team. This position is based out in Mumbai. Educational Qualifications: Required: B.Tech in Electrical/Electronic Engineering. Preferred: Master s degree in a related field. Experience: Minimum: 5 8 years in Design Engineering. Solar Power Plant Design: Proven experience in designing solar power plants. Battery Storage: Experience with battery storage technologies is a plus. Required Skills Software Proficiency: AUTOCAD E TAP Dialux PVSyst (Preferred) Electrical Design: Experience designing systems at voltage levels of at least 11 kV, 33 kV, or 66 kV.

Software used- Intools/ SPI

Position: Structural Engineer. Contract: Bangalore/Pune. Supervise guide structural engineers and drafters and having full technical responsibility for interpreting, organizing, execution complex assignments. Prepare scope of work and budget estimates and monitor progress. Independently handling, decision making, communicating with other CoPs on the assigned projects. Acts as mentor for Engineers drafters Forecast workload and schedules. Develop structural design criteria for projects. Analyze and design structures for water and wastewater treatment, and other facilities. Prepare structural design calculations and check calculations. Direct the development of structural drawings. Coordinate design with other disciplines. Review or write specifications. Develop new specifications as needed. Perform engineering services during construction, including review of shop drawing submittals and response to contractor questions. Design provide solution to the modification of existing structures Conduct condition assessments of existing structures and prepare reports. Manage tasks on large projects or manage number of small projects. Participate in new business development. Actively participate in Technical Knowledge Management (TKM) site, share your knowledge with other members in the group We re hiring Structural Engineer (Bridges) for one of our Leading MNC to join their growing team. This position is based out in Bangalore/Pune. Minimum Qualifications B.E (Civil or Civil/Structural)., M.E (structural Engg) Preferred 10 -14 years of experience in structural analysis and design of reinforced concrete, structural steel, and foundations. Knowledge of commonly used computer software (Word, Excel, AutoCAD). Knowledge of structural and engineering applications (STAAD, RISA, MathCad). Preferred Qualifications: Master s Degree in Structural Engineering is preferred. Familiarity with international standards such as Euro codes American codes ASCE, IBC, AISC, ACI, ASTM. Experience with static and dynamic equipment foundations, steel structures like pipe-racks and equipment supporting structures, steel and reinforced concrete buildings, connection designs, development of design criteria, specifications and standards. Advance Knowledge of Finite Element Analysis methods and software. Experience with structural designing for water/wastewater/other industrial/facilities(building) projects Drafting software REVIT, AutoCAD, etc., Hand on experience in designing the structures using American codes like ACI, ASCE, IBC, etc., and Euro codes.

Position: BIM-Revit MEP Point Cloud. Contract: On Permanent Role. To produce 3D Deliverables from Point Cloud Data and Lidar using Revit. Produce 3D Existing Conditions Models with exceptional detail and accuracy. Skills with AutoCAD, Revit and related software. Knowledge of AEC disciplines, MEP, architectural and structural standards The skills to bring include the ability to set up models for production and optimize Revit modeling workflows. A strong knowledge of BIM standards, the ability to ensure accuracy in the models and adherence to the quality standards. Experience in WTP/WWTP or Industrial plants. 4 yrs experience in Point cloud Data conversions. Production of high-quality 3D BIM Models in Revit Incumbent will utilize various CADD modeling /design techniques per Company CADD and/or client provided standards. Should have ability to work independently within a project team. Immediate supervisor provides direct technical guidance for unusually difficult assignments. Collaborate with other designers, engineers and architects and clients to convert information into layout designs, drawings and models using REVIT and AutoCAD. Decipher information received from various formats (sketches, BIM Execution Plans, Architectural drawings, Experience within infrastructure especially WTP-WWTP /industrial projects is a plus. Should be interested and able to work in an international environment. Demonstrate strong understanding and experience in delivering LOD 200 to 400 BIM model using any BIM Software Knowledge of Plant 3D, Civil 3D and BIM 360 will be advantageous. We re hiring BIM-Revit MEP Point Cloud for one of our Leading MNC to join their growing team. This position is based out in Bangalore/Chennai/Pune. Minimum Qualifications: Degree/ Diploma in Engineering with vocational technical training in CADD modeling technology and 3D modeling technology with 4-7 years of related experience (or equivalent working knowledge/experience). The incumbent must possess a strong working knowledge of core 3D CADD applications. Must have proficient knowledge in handling Revit and other BIM application tools and concept of BIM. Capable of producing Revit plans, sections, elevations, details, schedules etc. must be familiar with all Revit tools and creating and editing view range, drafting views, view templates, system families, materials, project/shared parameters, multicategory schedules, project title blocks, worksets, Revit category-based profile, annotation families etc., must be capable of link multiple Revit files and work. Capable of handling Revit projects without any guidance from the superior and managing the tasks with sharing the work with others. Must be capable of performing Clash detection using Navisworks and Revit interference check, export Clash reports, review clash reports etc. Create Dynamic Blocks with parameters Use different 3D representations such as shading, conceptual etc. Export 3D geometry for use by subcontractors and outside agencies. Assist in the production of producing 2D sheets (plans, sections, 3D clips and details) from 3D/4D multi-discipline models under close supervision from senior 3D Modeling staff (Transitional 2D techniques) Complete other duties as assigned appropriate for the designated grade level. Preferred Qualifications Degree/Diploma in Engineering. Experience with Architectural / Structural/ Mechanical drawings, developing equipment layout and site plan drawings. Experience in leading the modeling related tasks and coordinating with client to get the deliverables completed on schedule and budget.

Position Description Position Title : Commercial Manager Location : Mumbai State : Maharashtra, India Reports to (Position) : Country Manager and Regional Commercial Manager PURPOSE OF POSITION:The primary role of the Commercial Manager is to provide effective commercial advice to allow Brunel to achieve its business goals and objectives in India and manage the Brunel Commercial process in India. The role will act as the primary interface between the Business Unit Managers based in India and is to assist with development of customer tenders and proposals. PRIMARY DUTIES & RESPONSIBILITIESCoordinate all tenders and client proposals and review and / or preparation of the commercial terms and technical documents therein.Guardian of the Brunel Commercial Procedure and preparation of the Risk Assessment ChecklistLiaising with RCM related to high-risk tender document review. Review and coordinate the review and coordinate signing of commercial agreements in accordance with Brunels Commercial ProcedureUndertake continuous review and development of processes across the department to improve Maintain up to date legislate understanding of state-based workers compensation schemes and other Brunel global policies to ensure compliance as part of biddingUnderstanding of Brunel Risk Management program and Insurances and their application in the businessPrimary interface between Regional Management and Corporate Legal counselManage internal relationships with the Global Commercial Team and other regional offices.Assist the Regional Manager and Business Managers in the tendering process for clientsAdvise on matters pertaining to contractors terms and conditions like allocation of the project budgets post award of the tenderSetting up the initial Cost sheet, Placement template and employment/ offer template after award of the new tender/contracts.Review new contracts and changes to client contracts and project specific guidelines. Ensure any requirements from operational or finance perspective is understood throughout the Brunel locations and departments. Reviewing Commercial performance of contracts and escalating to management, if not in line with approved budgetsProvide guidance to Account Management in commercial queries relating to contractors and their clients like tax impacts in country or for new ventures, with support from external consultants, if needed.Assist the business units in financial analysis and feasibility calculations upon billing structures and rate build up sheets for both common law contracts, cross boarder contracts and unionised agreements including any changes in taxation changes.Understand and comply with all HSE management plans, systems and objectivesReview of Vendor agreement, before executionInsurance renewal process on Yearly basis to make sure the insurances are in line with client contractual requirements and cost effective, including negotiation with brokersGuardian of Contract Register, Maintaining Tender Registry SKILLS ESSENTIAL TO THE JOB Technical: (Doing skills job-related knowledge, policies, procedures, techniques.)Experience in working autonomously and managing a small team.Exceptional technical capabilities (focus on Employment Law and international taxation).Strong Excel SkillsAbility to assess commercial and contractual risks within Client AgreementsKnowledge of relevant Federal, State and Provincial law requirements.Knowledge of dealing with international business issues including foreign tax regulationsChange management experience.Previous experience developing, implementing and improving internal control systems.Minimum of 10 years experience.Excellent attention to detail and ability to delivery quality services.Ability to work simultaneously on multiple issues and priorities. Business: (Understanding of business concepts, knowledge of the organisation, profitability.)Sound understanding of the Brunel target industriesStrong service orientation and customer service related skills.Good organisational, planning and presentation skills.Total confidentiality and the utmost discretion in all facets of employment. Human Relations: (People skills in servicing, influencing, developing and leading others.)Strong Leadership AbilityExcellent interpersonal and communication skills.Ability to establish and maintain effective empathy and rapport with personnel at all levels.Strong team player. ESSENTIAL PERSONAL ATTRIBUTESIntelligent lateral thinker.Results orientated.Self starter prepared to take the initiative and be accountable.Cooperative, strong team player.Flexible and able to adapt to change.Ability to work under pressure and to deadlines. QUALIFICATIONS PREFERREDTertiary Finance, Project Controls or EngineeringProfessional: CA or CPA or Equivalent SPECIAL CONDITIONSWillingness to work flexible working hours as and when required.Required to travel within India and internationally from time to time.If you are interested in this position, can whatsapp updated resume to contact+918655929873

Position: Tooling Engineer. Contract: On Permanent Role. Project Development phase, on his Tooling domain, under the direction of the Tooling Manager & Project Industrialization Manager: Develop New Concepts while designing various Tools (Welding Fixtures, Assembly Fixtures, Lifting tackles) Able to Create Design in Catia V5 & DMA. Implement Automation (Hydraulic & Pneumatic) of Welding Fixtures & Assembly Fixtures Conduct Design Reviews & DAP with all the Stake Holders and get the Signoff for In house and Supplier Designs, addressing all the past REX & Areas of Improvements. Detailing the design by making 2D Drawings in Catia V5 (Able to critical dimensions. with its Mfg. tolerances, GD&T Follow up the Supplier for the Manufacturing Progress and Monitor the Progress Necessary Modifications & Improvements during the manufacturing, Validation to be updated in the Fixture Drawings Conduct Fixture Inspection, Validation & Trial, Address the Concerns raised During Trial with CAPA Experienced in Tool Design in Railway industry or Heavy Industries Good knowledge of technologies, IT Tools Catia V5 Good Knowledge of GD&T We re hiring Tooling Engineer for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Education: Bachelor s degree Total Years of Experience: 4-10 Years

Position: Stress Engineer. Contract: On Perm Role. Hand calculation knowledge through classical approach using strength of materials and free body concepts Able to understand the Technical requirements and have basic understanding on loads and their behavior Should be well-versed with Classical analysis approaches, Should be able to review and validate the results for Metallic parts Should have Strong knowledge and experience in Classical approach Static and Fatigue calculations (advantage with Aerospace Industry) Hands-on Experience on Aircraft Landing Gear components is preferable We re hiring Stress Engineer for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Education: Bachelor s degree Total Years of Experience: 2-7 Years Hand calculation experience is a MUST Hands-on Experience on Aircraft Landing Gear components is preferable

Position: Special Process Engineer. Contract: On Permanent Role. Analyze the current performance situation of the supplier Analyze the challenges and constraints of the supplier in all areas, Develop the necessary action plan with the supplier, Follow the action plan and its associated schedule, Carry out and share with customer the progress of actions, Measure and assess the relevance of the actions taken in the face of the problem encountered. Monitoring the special processes for each supplier Qualification of the special processes at new suppliers, new processes, and new specifications We re hiring Special Process Engineer for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Qualification : BE Experience: 10 - 15 Years Domain Knowledge : Aerospace

Role & responsibilities Experience in electrical requirement in FPSO topside modules / OffshoreinstallationsShould have experience of latest version of PDMS / E3D modelling softwareEquipment modelling (lighting fixtures, junction boxes, Field distribution board)Cable tray modelling in cabling system and cable traycable tray support modelling (with MDS / without MDS)Cable modellingDraw module

Position: Building Information Modeler (Civil 3D) Contract: On Permanent Role. Should be proficient using AutoCAD Civil 3D in following areas; Terrain modeling and surface water management projects and studies Understanding of Storm Water Design and Hydrology Knowledge of Data Shortcuts Pressure and Gravity Pipe Network Design Grading design using Corridor modeling. Production of drawings for construction purpose Integrating Civil 3D output with another BIM software s like Revit and Plant 3D. Proficiency also includes a strong understanding of Civil 3D Annotation styles and annotation tools, object and label styles, solid understanding of key objects such as Surfaces, Alignments, Profiles, Profile Views, Surface Analyses and Volume Calculations, and a basic understanding of Feature Lines. Implement innovative approach to reduce drawing production cost and hours. Efficient use/plugins for integrating other applications (HEC-RAS, Storm CAD, Water/Sewer GEMS etc.) to generate drawings based on specific project requirement. Ability to define problems, collect data, establish facts, and draw valid conclusions. Attending client coordination and review meetings, preparing and presenting project status updates and supporting Project Lead/Team Lead in engineering-related tasks. Implement Safety and Quality aspects into design. We re hiring Building Information Modeler (Civil 3D) for one of our Leading MNC in Infrastructure to join their growing team. This position is based out in Bangalore. ME or BE in Civil/Environmental Engineering (Preferred) Autodesk AutoCAD Civil 3D Certified Professional Minimum 5+ years of relevant experience Excellent written and oral communication skills Independent player with high self-motivation Experience on International Projects will be added advantage. Passing of an Autodesk AutoCAD Civil 3D Certified Professional examination within the last 3 years is a plus.

Position: Civil Engineer. Contract: On Permanent Role. Desired work competencies for this position include the following: Lead or participate in water/sewer/stormwater conveyance projects. Good knowledge and active experience using WaterGEMS, SewerGEMS and ICM InfoWater/SE. Develop and conduct engineering analysis for planning, studies and detailed pipeline designs. Good knowledge on pipeline crossing techniques (HDD/Jack and Bore/Micro tunneling) Provide project management assistance and technical leadership. Able to present sound technical solutions and work products to peers, clients and other stakeholders. Prepare and develop engineering technical reports, studies and pipeline work specifications, and evaluate alternatives. Prepare plan and profile sheets utilizing Civil 3D. Provide engineering services during construction support. Assist with business development pursuits when required. We re hiring Civil Engineer for one of our Leading MNC to join their growing team. This position is based out in Bangalore/Chennai/Pune. Masters s degree in Civil, Water Resource and Environmental, Pipeline Engineering or related discipline. 15+ years of relevant experience. For this role we are looking at a candidate with good experience water / stormwater conveyance projects. The candidate should have worked in international projects (preferably projects in US Middle east)

Position: Environmental Engineer (Desalination) Contract: On Permanent Role. We re hiring Environmental Engineer (Desalination) for one of our Leading MNC to join their growing team. This position is based out in Bangalore/Chennai/Pune. Minimum Qualifications Master s degree in Civil, Environmental or Chemical Engineering with 15+ years of Experience (Preferred). At least 10 to 12 years of experience in water/wastewater process mechanical engineering for municipal or industrial clients. Strong communication skills with internal and external clients Experience as a leader, mentor, and problem solver with a determination for excellence. Independent player with high self-motivation. Experience on International projects/clients will be added advantage. Strong communication skills with internal and external clients. Experience as a leader, mentor, and problem solver with a determination for excellence. Preferred Qualifications Professional Engineer (P.E.) or Chartered Engineering (CEng) License is preferred. Alternative/Design Build project delivery experience.

Dear Candidates,Greetings from Brunel!!!www.brunel.netBrunel India Private Limited, a subsidiary of Brunel Holding Group Company (Brunel Intl. N.V.) a company registered in the Netherlands with over 10,000 employees in 104 offices across 35 countries. The Energy Division of Brunel Group comprehensively provides manpower services for Upstream Oil & Gas, Downstream Oil & Gas, Renewables, Power Generation, Mining & Resources, Civil Engineering, Automotive, Rail, Life Sciences, Finance, Legal and ICT. Our core services are Pay Rolling, Contract Hire and Direct Hire services for major Operating companies and EPC contractors.Basic terms of employment are mentioned below: - Positions: Civil EngineerExperience : 8 -10 yearsQualification: B.E in Civil or Structural Engineering Job Location : Remote, Office located at BangaloreWork Mode: Remote working. In a month candidate have to work from Bangalore office for Three to Four days.Role & responsibilities 1. Good Communication, Presentation and Leadership skill2. MNC Experience3. Candidates who can join early 4. Experience in Civil Design of energy or heavy industrial facilities. A concentration in renewable energy industry is a plus including PV, Wind and/or BESS.6. Excellent communications skills, with the ability to provide training on complex operations7. Demonstrate continuous commitment to safe operations. Be an active role model and constant resource to the organization.8. Experience in renewable energy construction and design. Experience in heavy bid or similar software.9. Must be able to use Microsoft Word, Excel, PowerPoint, Project and AutoCAD.10. Ability to communicate detailed information accurately to internal / external customers11. Ability to professionally represent the company when dealing with external organizations12. Able to work in an indoor or outdoor environment.13. Have a valid drivers license and satisfactory driving record.Interested candidates can share CVS on o.komal@brunel.net/ Contact No 8655929878

Position: Cloud Developer - MLOps Contract: On Permanent Role. Design, develop, and maintain robust AWS cloud infrastructure to support large-scale applications. Architect and implement scalable solutions using AWS services such as EC2, S3, Lambda, RDS, IAM, VPC, CloudFormation, and more. MLOps: Implement and manage MLOps pipelines to streamline the deployment and monitoring of machine learning models. Automate model training, validation, deployment, and monitoring processes to ensure efficiency and reliability. Large Language Models (LLM): Utilize expertise in LLM to enhance our AI-driven solutions, including fine-tuning and optimizing pre-trained models. DevOps Capabilities: Develop and maintain CI/CD pipelines using tools such as Jenkins, GitLab CI, CircleCI, or AWS CodePipeline. Implement infrastructure as code (IaC) practices using Terraform, CloudFormation, or AWS CDK. Ensure the highest levels of security, scalability, and performance in all cloud deployments. Monitor and manage the health, performance, and security of cloud environments using AWS CloudWatch, ELK stack (Elasticsearch, Logstash, Kibana), or Prometheus Grafana. Mentor and guide junior engineers, fostering a culture of continuous learning and improvement. We re hiring Cloud Developer - MLOps for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Education: BE in Computer science or Artificial Intelligence Experience: 5-10 Years

Position: Artificial Intelligence Engineer. Contract: On Permanent Role. Design, develop, and implement AI and ML algorithms, including a focus on Generative AI applications. (This can include tasks like text generation, image creation, or data augmentation). Participate in all phases of the AI/ML project lifecycle, from data collection and pre-processing to model training, evaluation, and deployment. Collaborate with cross-functional teams (engineering, data science, product) to ensure successful project execution, especially when Gen AI is involved. Stay up-to-date on the latest advancements in AI and ML research, with a particular interest in the evolving field of Gen AI. Effectively communicate complex technical concepts, including those related to Gen AI, to both technical and non-technical audiences. Coordinate and manage internal and external stakeholders throughout the project lifecycle. Develop and maintain well-documented and maintainable code. We re hiring Artificial Intelligence Engineer for one of our Leading MNC to join their growing team. This position is based out in Bangalore. Education: BE in Computer science or Artificial Intelligence Experience: 3 6 Years

Position: Structural Engineer (Bridges) Contract: On Permanent Role. Designing simple and complex roadway bridges, including grade separations, stream crossings, and bridge rehabilitations. Designing transportation-related structures including culverts and retaining walls. Working closely with drafting team in the preparation of structural plans development. Prepare structural analysis and design reports. Perform bridge load ratings. Perform independent review of structural analysis and design of various transportation structures. Knowledge and skill exchange with the team. We re hiring Structural Engineer for one of our Leading MNC to join their growing team. This position is based out in Bangalore / Pune. Education -Post Graduation in Structural Engineering Good communication skills. Fluent in English 5+ Years of experience in the Analysis and design of Bridges, Grade separators, flyovers, underpasses, interchanges, Pedestrian bridges, skywalks etc. Thorough knowledge of AASHTO, British and Euro standards Design of Reinforced Concrete Bridges, Structural steel bridges, and pre-stressed concrete bridges Design of bearings, design of expansion joints, and other bridge related miscellaneous Structures Worked on projects in the Middle East and US Hands-on with AASHTO LRFD bridge design methods Conversant with seismic design of bridge structures Conversant with structural steel member and connection (welds/bolts) design Shoring Design, Assessment of Bridge Rating, Design of light poles and signage gantries. Software Exposure - Good knowledge of Finite Element Analysis, Modeling & Analytical Skills. Specific - Staad Pro, Midas Civil, CSI Bridges, SAP and ETABS. Preferred Qualifications Worked on projects with Ashghal, RTA etc. and familiar with respective delivery Requirements Proficiency in developing macros/programming and creating routines using Mathcad Certifications like PE, CEng etc. Experience with Open Bridge, AutoCAD and MicroStation.

Position: Training Administrator. Contract: On Contract Role. We are looking for a Training Administrator who will ensure that our global training administration run smoothly. The team has a global scope, support different academies and respond to queries by managers and employees. You will be part of the My HR organization which is the face of HR to our employees and managers. You will be operating in a process driven environment that is undergoing a lot a change. Principal Accountabilities: Create and implementing training programs using the Workday Learning LMS, this includes: Setup and deploy classroom and Virtual Instructor Led sessions Test, Setup and deploy eLearning Ensure learning attendance is correctly registered, including apply of waivers Assignment of training based on policies Managing learning campaigns, make changes or create from scratch Create learning reports Manage training records (e.g. trainee list, schedules, attendance sheets) Submit reports on training activities and results Ensure employees and vendors follow the established policies Processing enquiries by managers and employees Support academies how to structure and deploy content in the Workday Learning LMS. Manages external 3rd party content catalog and courses like Udemy Work directly with managers and employees to resolve issues related to learning content, access, and system functionality. We re hiring Training Administrator for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Pune/Vadodara. Experience in a corporate training administration role. Workday Learning certification. Knowledge of instructional design principles and e-learning development tools. 3+ years experience of working as a Training Administrator, including demonstrated experience with the Workday Learning Experience in designing and configuring learning programs, curriculum structures, and course content Excellent communication and interpersonal skills. Excellent organizational and multitasking ability with great attention to detail Good practical experience with MS Office Strong communication skills Knowledge of office procedures and billing Is initiative and confident with a can do attitude Excellent problem-solving and troubleshooting skills related to LMS administration and user support

Position: Projects & Planning Engineer. Contract: On Permanent Role. Location: Mumbai. We re hiring Projects & Planning Engineer for one of our Leading MNC in Oil & Gas to join their growing team. This position is based out in Mumbai. Education: BE/ B. Tech Experience: 5+ Years Oil and Gas projects experience (Designing)

Position: Senior Electrical Engineer. Contract: On Permanent Role. Location: Chennai. We re hiring Senior Electrical Engineer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Chennai. Education: B.E/B.Tech. Refinery Petrochemicals (12+ years ofexperience)

Position: Lead Electrical Engineer. Contract: On Permanent Role. Location: Chennai. We re hiring Lead Electrical Engineer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Chennai. Education: B.E/B.Tech. Refinery Petrochemicals (15+ years ofexperience)

Role & responsibilities Should be proficient using AutoCAD Civil 3D in following areas; Terrain modeling and surface water management projects and studies Understanding of Storm Water Design and Hydrology Knowledge of Data Shortcuts Pressure and Gravity Pipe Network Design oGrading design using Corridor modeling Production of drawings for construction purpose oIntegrating Civil 3D output with another BIM softwares like Revit and Plant 3D Proficiency also includes a strong understanding of Civil 3D Annotation styles and annotation tools, object and label styles, solid understanding of key objects such as Surfaces, Alignments, Profiles, Profile Views, Surface Analyses and Volume Calculations, and a basic understanding of Feature Lines

Position: Accounting Analyst Contract: On Contract Role. Roles and Responsibilities: Reporting - Statutory Audit, Cost Audit, Tax Audit Assist in Preparation of reconciliations, audit schedules, note to accounts. Liasoning with statutory auditor in certain audit areas. Liasoning with internal stakeholders in getting data required for audit purposes. Assist in preparation of data required for cost audit. Support, preparation of tax schedules for tax audit purpose. Roles and Responsibilities: GST Reporting Involved in monthly GST compliances GSTR1, GSTR3B etc. Prepare data for GST filing. Support in annual GST audit. Support in GST assessments, queries etc. Day to day GST matters if any. We re hiring Accounting Analyst for one of our Leading MNC in Oil & Gas to join their growing team. This position is based out in Pune. Chartered Accountant having 3-6 years of experience, even semi qualified candidate with good experience and understanding would help. Knowledge of SAP is an added advantage. Candidate should be able to work under leadership of team leads. Team player with ability to work with colleagues in a collaborative manner.

Position: Safety Officer. YOE: 1+ Year. Contract: On Contract Role. Location: Vadodara. We re hiring Safety Officer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Vadodara. The Safety Officer promotes workplace safety by enforcing safety regulations, conducting inspections, and providing training to employees. Responsibilities: Enforce safety regulations and standards. Conduct regular safety inspections. Provide safety training and education. Investigate accidents and incidents. Maintain safety records and reports. Qualifications: Bachelor s degree in Occupational Health and Safety, Environmental Science, or related field. Knowledge of safety regulations and standards. Strong organizational and communication skills. Attention to detail. Ability to conduct training and presentations.

Role & responsibilities 6 years of experience in offshore structural design within the oil & gas sector.Proficiency in E3D modeling and drafting for fixed/floating offshore oil & gas production/processing facilities.

Position: Senior Engineer - Electrical (OM) Contract: Permanent Role. To Attend Preventive, Corrective maintenance and improvement works if any as per schedule; ensure WEGs and related equipment are maintained in neat and tidy and technically acceptable conditions according to standard engineering practices Keep up-to-date with all operating/ maintenance manuals, checklists, service bulletins, etc. applicable to the WEG and associated equipment, carry out servicing activities as per the latest certified checklists, manuals and service bulletins Achieving objectives projected by Site head, department head. Prepare Monthly, Quarterly yearly turbine performance report, MTTR MTBF reports. We re hiring Senior Engineer - Electrical (OM) for one of our Leading MNC to join their growing team. This position is based out in Bijapur. EXPERIENCE REQUIRED FOR THE POST :03 to 04 Years in Same Field QUALIFICATION REQUIRED FOR THE POST: Diploma or B.E from Govt. Approved University (preferably with C license) ANY ADDITIONAL / SPECIAL SKILL REQUIRED Excellent in English and Kannada communication skills (Verbal as well as Written) Awareness on Quality Management System Requirement Awareness on Environment Management System Requirement Qualified internal auditor EMS and OSHAS Management System Requirement Willing to join immediately

Position: Project Engineer; YOE: 2-5 Years; Contract: On Contract Role; Location: Hazira. We re hiring Project Engineer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Hazira. Project engineer (2-5 years experience); He/She can be a Civil/Mechanical/Electrical engineer or any other engineering background but should be willing to work as a project engineer to support all project related requirements for the Hazira capacity expansion project; Should be willing to relocate to Hazira (Surat); He/She will be part of the projects team here; Should be willing to work with little handholding and supervision.

Position: Offshore Structural Engineer; YOE: 8 - 25 Years; Contract: On Permanent Role. We re hiring Offshore Structural Engineer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Chennai. Graduate in Civil Engg / Structural Engg desired, Post Graduate in Structural Engg / Offshore Structure is preferable. Candidates conversant with SACS software for analysis / design of offshore structures. Hands on experience in performing In place / Inservice and Preservice analysis of Fixed platform Jacket topsides / FPSO / Floater Topside Modules. Also Experience in Spectral Fatigue / Seismic, On bottom stability, Pile handling, Floatation Upending for Jackets / platforms will be an added advantage. Experience in using SESAM / STAAD Pro / SAP2000 FEM software s ANSYS / ABACUS would be an advantage. Responsible to provide inputs to structural modelers / drafting team, check 3D Model Drawings for Engg aspects using NAVIS works / equivalent 3D Model viewers, prepare MTO / BOQ / BOM, Inputs for Weight Control report, verify other Disc data for Weight Control report. Familiar with Structural Material Grades / fabrication aspects / detailing aspects; Well Head Platforms, Process Platforms FPSO topside Modules , Offshore Fixed platforms , Jacket design , Top sides design; Pre service analysis, In service analysis, Seismic analysis, Fatigue Analysis , Push Over analysis , Jacket launch Analysis. SACS Software, ANSYS software, Genie Software.

Position: Process Design Engineer; Contract: On Permanent Role; LNG Process Engineer: With experience in any of the following : LNG processing, LNG tank farm / storage, LNG regasification, NGL process, Propane refrigeration system, cryogenic exchangers (Cold box); Fertilizer Process Engineer: With experience in any of the following : Ammonia, Ammonia storage, Steam systems, Reforming, Urea, Urea granulation; Petrochemical Process Engineer: With experience in any of the following : Ethylene cracker, Polyethylene, Polypropylene, Bio-refining, Ethane/Ethylene storage. We re hiring Process Design Engineer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Chennai. Education: Graduate in Civil Engg / Structural Engg; Total Years of Experience: 8-25 Years; Preferred Skill set : PID, Line Sizing, Vessel sizing, Pump Hydraulics, PSV calculations , Control valve design; Preferred Software experience - Aspen Plus, Hysys , Pipe net, Flare net.

Preparation of Bill of Quantities; Quantity verification; Project price calculation; Preparation of settlement documents; Cost accounting; Cost prediction; Communication with the internal team. We re hiring Procurement Specialist for one of our Leading MNC to join their growing team. This position is based out in Noida. Qualification: Any Graduate/Postgraduate; Experience requires: 10-15 Years Experience in procurement.

Position: Pipeline Designer. Contract: On Perm Role. We re hiring Pipeline Designer for one of our Leading MNC in Oil Gas to join their growing team. This position is based out in Mumbai. Education: Diploma in Engineering/HSC+ITI/SSC+ITI Total Years of Experience: 5 - 10 Years Pipeline alignment sheet, Riser GA and details, crossing drawings, platform approach, shore/station approach, trench details and road crossing, HDD

At Brunel, We are looking for an experienced IT recruiter/Technical recruiter to join our HR department. You will play a key role in sourcing, screening, and hiring top-tier IT talent. As an IT recruiter, you are responsible for evaluating and selecting candidates with the right cultural fit and skills that are vital to our companys growth. Your roles & responsibilities :Creating and posting job descriptions.Sourcing potential candidates through various platforms.Conducting pre-screening calls for analyzing applicants’ abilitiesConducting interviews through various methodsCoordinating with Client to forecast their departments hiring needsSending personalized recruiting emails for current job openingsBuild database of potential candidates for future hiring needs.Manage the end-to-end process of screening potential candidates to negotiating offers and ensuring smooth onboarding. Preferred candidate profile :Having a degree in human resource management or relevant fieldHaving prior experience in technical recruitment , have in-depth knowledge of various skillsets and tech stacks, staying updated on various industry trends and technologies for at least 3+ years to 5 yearsExperienced with different interview formatTechnically expert that has the ability to understand and explain the job requirementsHaving familiarity with applicant tracking systemsExceptional verbal and written communication skillsinterested candidates can share your resume to : g.pavitra@brunel.net

Position: Principal Piping Material Engineer. YOE: 15-20 Years. Contract: On Permanent Role. Location: Bangalore. We re hiring Principal Piping Material Engineer for one of our Leading MNC in Oil & Gas to join their growing team. This position is based out in Bangalore. Academic: BE/BTech in Mechanical engineering Experience: 15-20 years relevant experience in the offshore Oil & Gas industry Wellhead/Fixed Process Platforms, FPSO topsides modules & Turret Mooring System. SW or tools: Expert level in Excel, knowledge in Aveva Engineering & ERM is preferred.