1352 Breakdown Maintenance Jobs - Page 39

Maintenance Engineer-Mechanical Stations: > Responsible for safety in the assigned area. > Responsible for break down and preventive Maintenance of Mechanical, Dispensing, Pin insertion, Pick and place, Conveyors, Pressing and other SPM's. > Need to take care of KPIs like Technical Availability, MTTR, MTBF and IDC > Responsible for spares management and cost optimization. Qualifications Diploma in Mechatronics /Electrical & Electronics/ Mechanical Additional Information 8 to 10 Years of experience in Maintenance in Electronics manufacturing industry

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Key Roles & Responsibilities: Supervising and verifying preventive maintenance as per schedule for solar power plant equipments e.g. Modules, Inverters. Maintained all required documents at site Maintaing daily log books and records Preparing the DGR,weekly,monthly reports Checking inverters and Strings for faults and related. Rectifications, checking and rectification of defective strings and modules. Supervising any breakdown maintenance. Coordinating with OEMs for spares, AMC, warranty and service requests. Upkeep of SCADA and WMS. Monitoring of SCADA and WMS parameters and point out faults to maintenance technicians. Verification of module cleaning as per schedule. Support in JMR activitity Maintaining list of plant related issues and taking up with engineering, contracts, accounts, environment etc. Management of spares/ Man power/Budget Supporting in Energy auditing & reduction of Power Loss through audit and review. Analytics of various plant performance parameters with respect to Plant design (PV syst). Carrying out analysis on case to case basis as required to examine performance efficiency/shortfall if any. Overall data management and MIS reporting for all operational plants Supervision Cleaning of modules and vegitation. Supervision of First Aid box as well Fire Extinguisher periodically. Scrap management Maintaining house keeping/5S and greenery Must Have: B.E / B.Tech in Electrical Engineering 3 to 6 years of experience in solar O&M

Role & responsibilities Maintenance of automated assembly machines, PLC based SPM machines, Spin,/Hot plate welding, added knowledge in Utility maintenance of chiller, Compressor DG. Trouble shooting knowledge in assembly machine & PLC base equipment -Omron/Siemens/Delta/Mitsubishi Special Preference - Programming and troubleshooting knowledge in 3 axis and 6 axis Robot (Fanuc, Yaskawa, Nachi make), Knowledge in IATF 16949/ISO14001/ISO45001/ISO50001 Maintaining the Maintenance KPI like MTTR/MTBF/OEE Responsible for 5S activities in Plant maintenance Preferred candidate profile MTTR/MTBF/OEE and Plant Engineering and Plant safety

Designation - Asst. Manager / Dy. Manager - Maintenance Company - Leading Glass Mfg. Company Job Location - Bharuch / Ankleshwar Qualification - B.E./ B.Tech. - Mechanical Experience - 8yr. to 15yrs. share with your friends. Required Candidate profile Troubleshooting & root cause analysis of major / repetitive breakdowns. Preventive and predictive maintenance, MTTR, MTBF Utility Maintenance 5s, Poka-yoke, Support Team Exposure on TPM Activity

Maintenance of Electrical/Mechanical CNC based machines,Robots/Spot welding, furnaces, Presses/Shearing,Powder coating/paint shop machines.Prepare & implement Preventive Maintenance Plan & check points 2 reduce breakdowns & MTTR & increase MTBF Required Candidate profile Maint of PLC Mitsubishi & Delta,AC/DC Drives,Temp & Pressure controllers & servo motor plant manufacturing machines.Maintenance of Hydraulic & Pneumatic plant Machines.Compliance ISO/IATF/OHSAS Stds

Version: Issued by: Checked: Released: Job Title: Mechanical Maintenance Manager Wire and Cable Extrusion Industry Location: Sira Job Type: Full-time Reports To: Plant Manager / Operations Head Job Summary: We are seeking an experienced Mechanical Maintenance Manager to oversee maintenance operations, equipment reliability, and preventive maintenance programs in the wire and cable extrusion manufacturing industry . The ideal candidate will ensure optimal performance of machinery, reduce downtime, and improve efficiency through proactive maintenance strategies. Key Responsibilities: Develop and implement preventive and predictive maintenance programs for mechanical equipment. Oversee the installation, repair, and maintenance of extrusion machines, tooling, and support systems. Monitor equipment performance, downtime, and breakdown trends , implementing corrective actions. Ensure adherence to safety, quality, and compliance standards in all maintenance activities. Coordinate with production and engineering teams to minimize disruptions and improve machine efficiency. Manage spare parts inventory , ensuring availability while optimizing costs. Develop and train maintenance teams on troubleshooting techniques and equipment handling. Work with external vendors for equipment procurement, repairs, and upgrades . Conduct root cause analysis and continuous improvement initiatives to enhance machine reliability. Maintain documentation of maintenance activities, work orders, and compliance reports . Required Qualifications & Skills: Bachelors degree in Mechanical Engineering or a related field. 8+ years of experience in mechanical maintenance, preferably in wire and cable extrusion manufacturing . Strong knowledge of extrusion machines, hydraulic, pneumatic, and electromechanical systems . Experience with CMMS (Computerized Maintenance Management Systems) . Proficiency in troubleshooting, failure analysis, and maintenance best practices . Strong knowledge of MTTR, MTBF and TPM Strong leadership, team management, and problem-solving skills. Knowledge of lean manufacturing, Six Sigma, and continuous improvement techniques . Understanding of safety regulations, compliance requirements, and industry standards . Preferred Qualifications: Certifications such as Certified Maintenance & Reliability Professional (CMRP) . Experience in automation, robotics, or Industry 4.0 maintenance strategies . Familiarity with PLC-controlled systems and advanced diagnostic tools . Compensation & Benefits: Competitive salary based on experience. Health insurance. Opportunities for career growth and professional development.

Job Summary We are seeking a Technical Lead with 6 to 8 years of experience in Core Java and Java 8. The ideal candidate will work in a hybrid model and will not require travel. This role involves leading technical projects ensuring high-quality code and collaborating with cross-functional teams to achieve business objectives. Responsibilities Lead the development and implementation of technical projects using Core Java and Java 8. Oversee the design and architecture of software solutions to ensure they meet business requirements. Provide technical guidance and mentorship to junior developers to enhance their skills and productivity. Collaborate with cross-functional teams to gather and analyze requirements for new features and enhancements. Ensure the delivery of high-quality code by conducting code reviews and implementing best practices. Troubleshoot and resolve complex technical issues to maintain system stability and performance. Stay updated with the latest industry trends and technologies to incorporate them into the development process. Optimize application performance by identifying and addressing bottlenecks and inefficiencies. Develop and maintain technical documentation to support ongoing development and maintenance activities. Participate in agile development processes including sprint planning daily stand-ups and retrospectives. Communicate effectively with stakeholders to provide project updates and gather feedback. Ensure compliance with security and data protection standards in all development activities. Contribute to the continuous improvement of development processes and tools. Qualifications Possess strong experience in Core Java and Java 8. Demonstrate proficiency in designing and implementing software solutions. Exhibit excellent problem-solving and troubleshooting skills. Show ability to mentor and guide junior developers. Have experience with agile development methodologies. Display strong communication and collaboration skills. Certifications Required Oracle Certified Professional Java SE 8 Programmer

JOB Details: Operation and Maintenance Mechanical press maintenance CNC/VMC machine maintenance TBM/Preventive Maintenance Kindly Send the Updated resume to proceed further for interviews Thanks & Regards, Jensy, Team Member Email: recruiter@apmcindia.in Whats App: 9585586622

> ATM installation. > Troubleshooting of ATM hardware and software. > Preventive maintenance. > Network troubleshooting. > INCLUDING ONLINE SUPPORT & TRAINING TO BANK PERSONS. > OPRATION ABILITY OF ALL ATM MACHINES AT DIFFRENT LOCATION Required Candidate profile 1. Good Communication 2. Hard worker 3. Able to work in pressure WITH FIELD 4. Good Learner, Multitasker 5. Knowledge of Hardware & Network

CNC, VMC machine maintenance , Break down & Preventive Maintenance . SPM machine maintenance Health insurance Food allowance Provident fund

To attend all the breakdowns in plant and utility. To carry out the preventive maintenance of production /Utility machines as per planned schedule. Maintain relevant documents like log books, formats etc. as per SOP. To execute general maintenance work in plant i.e. door repairing, Leakages etc. To follow safety rules and regulations with in the workplace. To Check safety of machine and work execution in plant.

Maintenance & testing of electrical equipment. Preventive Maintenance of motors, generators, transformers, circuit breakers, relays & control systems. Support new installations. Repairs & replacements. Perform inspections. Stocks of all spare parts. Required Candidate profile B Tech Elec 5-7 yrs exp in elec maintenance in hospitality industry. Good at coordinating with elec board. Ability to work with project mgrs, design teams & provide technical support. Detail oriented.

Designation: Trainee Technician Qualification: Diploma Or B.E (Mech) Experience: Freshers also eligible Salary: 1500 AED To 2000 AED (35000 INR to 46000 INR) Accommodation and medical by company Employment visa Contact: HR: Selva kanish - 9994015421

We are seeking an experienced Maintenance Manager to oversee and manage all maintenance activities in a plastics injection Molding environment. The ideal candidate will lead the maintenance team, ensure smooth operations, and implement strategies. Required Candidate profile • Bachelor's/Diploma in Mechanical/Electrical Engineering or a related field. • Proven 4-8 years of experience in maintenance management within a plastics injection molding setup.

Hello, We are hiring for Electrical Maintenance Engineer (E/M Engineer) High Voltage Cable/Power Cable Maintenance Job Overview: We are seeking a highly skilled and experienced Electrical Maintenance Engineer to join our team for shift maintenance in the field of high voltage cables and power cables. The ideal candidate should have at least 5 years of hands-on experience in electrical maintenance, specifically in high-voltage or power cable systems. This position requires a proactive and detail-oriented professional who can ensure the smooth operation, maintenance, and troubleshooting of electrical systems, with a focus on cables, in a fast-paced and safety-conscious work environment. Key Responsibilities: Conduct routine maintenance and troubleshooting on high-voltage cables and power cable systems to ensure optimal performance. Perform preventive maintenance on electrical systems, including cables, switches, and transformers. Investigate and resolve electrical faults, providing detailed reports of findings and corrective actions. Assist in the installation, commissioning, and testing of high-voltage cables and related systems. Perform insulation resistance testing, high-voltage testing, and ensure cable integrity in compliance with industry standards. Monitor cable systems and identify potential problems or risks, implementing necessary corrective actions. Coordinate with the maintenance team to plan and execute shutdowns, repairs, and emergency responses. Ensure compliance with safety regulations and electrical standards while performing maintenance tasks. Maintain accurate records of all maintenance activities, repairs, and testing. Provide technical support to other engineers and staff as required. Troubleshoot and repair electrical equipment failure quickly and efficiently to minimize downtime. Skills & Qualifications: Education: Bachelors Degree in Electrical Engineering or equivalent technical qualification. Experience: Minimum 2 years of experience in electrical maintenance, with specific expertise in high-voltage cables or power cables. Proven ability to troubleshoot and repair electrical systems, particularly in high-voltage environments. Strong understanding of electrical systems, power distribution, and cable installations. Familiarity with safety protocols and procedures in high-voltage electrical maintenance. Experience with cable testing, diagnostics, and performance monitoring. Proficiency in using electrical testing equipment such as insulation resistance testers, high-voltage testers, etc. Strong problem-solving skills and attention to detail. Ability to work independently and as part of a team, particularly during shift work. Excellent communication skills and the ability to work under pressure.

Role & responsibilities Safety Drive a safe environment culture (Safety First) Leverage BBS and Near Miss reporting to drive a continuous improvement culture Identify and participate in the eradication of unsafe conditions to achieve Zero Accidents Perform Machine Safety Risk assessments of line / process Compliance to health and safety procedures Participate actively in Quality improvements to achieve zero defects Ensure and sustain process and quality in compliance with Coca-Cola standards (KORE) regulations and procedures Participate and support internal and external audits Ensure accurate record keeping Autonomous Maintenance Equipment Care- Maintain work environment and equipment to agreed 5S standard Cleaning, lubrication, inspection and adjustments tasks Execution of first line maintenance Lead and participate in continuous improvement initiatives Learn and adapt to new technologies, like robotics, AI, ML etc Participate actively in Problem solving Troubleshooting and solving technical problems Data analysis and problem-solving tools like fish bone, 5 Why, Kaizen etc Root cause analysis of issues Plant Operation Execution of process checks, efficient packaging material management, accurate data recording, maintaining high level of GMP Execute physical and system (ERP) movements of all materials Driving fork truck, cycle counting and inventory control Operate system tools to enable operations like Ignition, MII etc Operational Excellence and Digitalization Train and equip with OE tools and certifications Utilize available data / reports for optimal decision making Demonstrate continuous improvement of plant metrics. Preferred candidate profile 3-5 Years experience in any production plant in maintenance role

Roles and Responsibilities Perform breakdown maintenance, CNC machine maintenance, VMC machine maintenance, and preventive maintenance tasks to ensure optimal equipment performance. Troubleshoot issues with machinery and implement corrective actions to minimize downtime. Maintain accurate records of work performed, including repairs, maintenance schedules, and inventory management.

Responsibilities: Minimum 3 years of CNC machine maintenance experience with electrical and mechanical skills Perform maintenance on VMC and HMC machines Perform breakdown repairs promptly & efficiently

Dear All, We are looking for an Junior Engineer Tool & Die Maintenance. Job Descriptions. Diploma In Tool & Die Making with 2 to 5 years if experience in Tool & Die Maintenance. To ensure effective and efficient Molding Maintenance as per the Plan PM/CM/BM & SPARE PART FITTINGS. 2D & 3D design knowledge and usage Soft skills experience like Excel, PPT, Word Etc. Supplier follow-ups- Communication mails and over phones Corrective & Breakdown Maintenance of molds/dies Periodical Maintenance of molds Spare Part Inspections/fittings/Trails of molds Responsible for quality repair using inhouse machines such as grinding,milling,cutoff,Bench grinding Achieve skill operations such as mold doctor,tig welding,ultrasonic welding Do & Ensure all documentation of all Maintenance related Activity interested candidates can send resume at manohara.is@trmn.biz

Role & responsibilities Assist in routine inspection, calibration, and preventive maintenance of lab instruments and equipment. Support troubleshooting and timely repair of laboratory machinery to minimize downtime. Maintain accurate records of maintenance activities, equipment logs, and service schedules. Ensure compliance with safety, quality, and regulatory standards within the laboratory environment. Coordinate with external vendors and service providers for specialized maintenance and calibration. Monitor lab utilities (like HVAC, water systems, and power supply) critical for lab operations. Assist in maintaining inventory of spare parts and consumables related to lab equipment. Collaborate with the lab team to ensure optimal functioning of all technical instruments.

Instrument Maintenance : Perform / Supervise preventive, corrective and breakdown maintenance of all plant field instrumentation and control system etc. Attend running complaints and monitor the performance of plant equipment, Troubleshoot and assist in reliability improvement, Carry out shut down / maintenance activities, Escalate where required IN ORDER TO attain production targets and to avoid unplanned shutdown of plant equipment. Participation in KAIZEN, SGA and 5S activities. Report abnormalities by regular LLF ,CLTI practices Loss Control Management Production Maintenance Support in conduct of risk analysis of operations and facilities, Implement changes to mitigate risk exposures, Participate in HAZOP / HAZID study, Follow up and implement audit recommendations IN ORDER TO adhere to QHSE standards and maintain Zero LTI Offshore/Onshore Maintenance Implement risk based maintenance, Support PMS on the Offshore platforms IN ORDER TO support production operations Procurement Able to identify the critical spares and their availability by timely creation of Material cataloguing requests, OEM approvals and Purchase Requisitions. Spare management: Prepare annual and need-basis material/service requirement, Co-ordinate purchase department in obtaining spares/services, Inspect incoming spares, Assist in finalizing inventory level, Maintain assigned tools IN ORDER TO ensure material availability and reduce material cost. Self Development Identify and Enhance Knowledge, Skill and Competency IN ORDER TO ensure self is aware and abreast in understanding the developments and emerging technologies happening within the discipline/industry QHSE Implement PTW and safety procedures, Conduct operations according to QHSE systems and participate in audit and close out of non-compliances IN ORDER TO develop safety culture among Staff and adherence to Cairn QHSE requirements. Ensure compliance to ISO 14001, OHSAS 18001/ISO 45001 and VSAP standards. CMMS Ability to work with SAP PM/MM (CMMS) for managing maintenance tasks and workflows. Able to digitalise the maintenance function as far as possible. AO/Training Basic understanding of asset optimisation and conducting internal Training to technicians team to improve improve skills of Technicians Qualifications: Instrumentation Engineering Graduate with 5-6 experience in Instrumentation maintenance in a process / E&P industry. Basic Understanding: Understanding of Oil and Gas Operations. Competencies: Instrumentation Drawing, PID, Cause and effect drawing Reading and Understanding Troubleshooting of PLC, DCS and SCADA control systems System Monitoring, Operation & Control Maintenance practices Equipment Selection Hazard Identification & Risk Analysis. Interpersonal Skills Communication Skills Verbal & Written in English. MS-Office skills Basic Computer Skills Basic Understanding of AO (Asset Optimisation) . Conducting PTW audit & TBT (Tool Box Talk). Knowledge : Knowledge of standard maintenance procedures Knowledge of QHSE standards and procedures Knowledge of production process Knowledge of DCS & PLC system and minor modification in control logics.

Looking for Field Service Engg with Medical Equipment experience background 1) Ahmedabad (Area - Gujarat / Rajasthan / Central India) 2) Pune (Area - Maharashtra, Goa & Central India) Roles and Responsibilities Installations & Demonstration of all IVF Lab equipment to customers . The reporting of which should be sent to the head office every week, as per Service Reporting Protocol To handle all service complaints as assigned by the Service Manager and co-ordinate for the same with the H.O. for timely service to the customer. To cater to all Maintenance & Repair requirements of the equipment's installed. To be involved in all activities related Demonstration of all Equipments Responsible for handling AMC contracts for all Equipment's in co-ordination with the Service coordinator. To be involved in activities relating to Validation of IVF Labs and Certification. To assist the Projects team in the set-up activities of Turnkey Lab Set-ups. Job Involves travelling to our customer sites across said territory's (Min 12 to 15 days travel in a month) Qualification - B Sc / B. Tech / BE Electronics / Electrical / Bio Medical Location - Ahmedabad - 1 / Pune - 1 Interested candidates please mail us your resumes - hr@intermedics.in / 022-42385230 or 33

1) Ensure the availability of machines equipment in right condition to meet the production requirements in SMD, PC, ASSLY 2) Carry out the PM of Machines as per checklist for trouble free operation of machine tools 3) Update Work Order after completion of breakdown 4) Implementation and support for TQM, ACME Other Projects Responsibilities Accountabilities Receiving the work request and creation of work orders based on work request. Execution of Mechanical breakdown in the areas of FRS, Rings Arranging material for Breakdown / PM from stores / fabricate parts and replacing the same for rectification. Attending the machine breakdown along with service engineer if necessary. Trial run of the machine after rectification / PM and handing over the machine for production Preparation of drawing for fabrication of parts inhouse Carry out PM of machines as per checklist. Take corrective and preventive actions. Carry out geometrical test as per machine test chart as and when required. Co-ordinate provide support for reconditioning / retrofitting of machines Co-ordinate provide support during new machine installation and layout change Update Work Order with details of work carried out resources, complete the Work Order after completion of breakdown Co ordinating with Mfg for implementation of TQM, ACME Other Projects

1. Ensure 100% availability of machines with 100% adherence to the Preventive Maintenance Schedules Responsibilities Accountabilities Performing the activities as per the given preventive checklists. Monitoring the moving parts on daily basis for signs of excessive wear , defects damage. Lubrication of machines Adhere Basic 5S and keeping the work place, tools, spares clean Disposing of waste materials, oils, waste, etc as per ISO standards. Attending the Machine Break downs both electrical and mechanical Servicing of Equipments(Ex,Motors,Pneumatic cylinders,Hoists,Belt conveyors,Gears) Adhering to preventive maintenance schedule CLIR checklist Adhering the safety norms,work permits and to wear appropriate PPEs at workplace Identification and rectification of Near miss and unsafe condition Create and closing of work orders for respective shift maintenance activities Providing details of spares requirement to reporting person Attending Preventive and breakdown maintenance in EOT cranes , Forklift trucks and pallet trucks

1.To operate the cold box and mixer machine with required quality and quantity 2. Individually core making and core coating with required quality and quantity 3. Follow the system in shopfloor by understanding SOPs and work instructions 4. Maintain Safety systems in foundry Responsibilities Accountabilities Achieve daily output as per plan Deliver Production activities as per SOP and work instructions Identify unsafe operations and practices and report the same to supervisor immediately Maintain Safe working environment in workplace. Analysis non conformity items root cause and corrective action Involve in process cycle time reduction Involve reduce raw material consumption Provide training new persons for core making process