1351 Breakdown Maintenance Jobs - Page 23

Shift Engineer will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Ensure that work performed in client space is accomplished with a minimum of disruption and is followed by adequate cleanup Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Fire, Life Safety, and HVAC Control systems for the facility to keep facility and building systems up to applicable standards as assigned Maintains responsibility for facility services, preventative maintenance, purchasing and inventory control, contracted maintenance, general maintenance and technical proficiency. Ensure the availability of an adequate operating inventory of tools and supplies and develop sources for stock materials related to maintaining the facility. Record readings and make adjustments where necessary to ensure proper operation of equipment Comply with departmental policy for the safe storage, usage, and disposal of hazardous materials; maintain a clean and safe workplace Assume responsibility for completion of assigned tasks. Prepare estimates on building repair and maintenance jobs; evaluate maintenance and repair needs. Conduct inspections of building and review work of subordinate staff. Coordinating with the maintenance of facilities, building, and equipment, as appropriate, to ensure optimum functionality; identifies, assesses, negotiates as necessary, and resolves building maintenance and usage problems. Respond to emergencies in a timely manner. Prepare reports, maintain inventories, and keep accurate records, order equipment and supplies. project ID

To support and manage the technical operation, maintenance, and continuous improvement of the plants drying and milling infra. ( Bleaching Earth ) To ensure smooth functioning of all equipment , support quality production, preventive maintenance Annual bonus Provident fund Food allowance Employee state insurance Accidental insurance Free meal Leave encashment Gratuity

To manage all Maintenance activities related with the Wires and Cables products.

About Job: Under direction, repairs/installs and maintains Aerial Work Platform equipment in a safe and professional manner, including DC electrical systems, hydraulic systems, & associated equipment, as well as mechanical equipment such as engines, motors, and sub assemblies, by performing the duties listed below. Preferred: Genie boom lift experienced Technician. Preferred: Genie & JLG Boomlift Machine Service Engineer For More details: Email: Koteshwara.rao@manliftgroup.com Phone No:9311262095 Role & responsibilities Maintain a clean, and safe work area, adhere to best practice safety procedures. Maintain positive customer relations through professional interactions with customers. Responsible for the safe maintenance and repair of a variety of Aerial Work Platforms and associated equipment, which utilise mechanical, diesel, electrical and electronic systems. Dismantles devices to gain access to and remove defective parts Examines form and texture of parts to detect imperfections Lubricates and cleans parts Repairs or replaces defective parts and components. Starts / operates devices to test their performance Sets up and operates repair equipment and repair parts according to instruction & procedure Reads, follows, understands oral and written instructions. Issue Field Service Reports” and “Service work orders” on maintenance tasks and fawp-block-list ults, and the parts, labour and time taken to complete the task. Maintain service vehicle in a clean & professional manner Operates equipment, demonstrate and familiarise customers when necessary. Understand basic principles of various systems and components installed on AWP’s. Conduct First check and final inspection of AWP’s in accordance with TMW guidelines. Perform basic equipment repair and maintenance of machines at the customer site / in workshop and ensure proper operating efficiency. Use of basic testing and adjusting tool kits for the repair and servicing of machines. Strip, clean and inspect equipment components, identify fawp-block-list ulty parts, rebuild/replace defective parts to restore machine functions. Periodic safety, operation and maintenance inspection of machines at various sites.

Under direction, repairs/installs and maintains Aerial Work Platform equipment in a safe and professional manner, including DC electrical systems, hydraulic systems, & associated equipment, as well as mechanical equipment such as engines, motors, and sub assemblies, by performing the duties listed below. Preferred: Genie boom lift experienced Technician. Preferred : Those who Worked on Heavy Contruction Equipment Machinary, JLG & Genie Boomlift Machine Service Engineer For More details: Email: Koteshwara.rao@manliftgroup.com Phone No:9311262095

Your key deliverables will be to: Manage and maintain electromechanical / utilities services at the site with the help of technician team. Prepare and implement planned preventive maintenance (PPM). Conduct inspections at site regularly to check for risk / defects areas. Review work of subordinate staff and provide guidance when needed. Ensuring the documentation, checking and follow up of the assets under defect liability period and AMC/CAMC in a tracker. Be responsible for hiring, training and development of shift engineers and maintenance staff. Formulating suitable budgeting controls and Monitoring SLAs & KPIs for JLL and outsourced agencies towards effective service deliverance. Maintaining service level agreements and keeping performance indicator scores above excellence. Ensuring timely renewal of the agreement, submission of invoices and follow-ups for the payments. Overseeing all vendor quotations and invoices. Ensure proper signoffs for attendance and all the required details for cost sheet submission. Ensuring timely submission of client approved cost sheet to JLL office and following up for the invoice. Schedule monthly vendor meeting to discuss on daily matters & ensure corrective actions are taken for the same. Planning and implementing for energy conservation. Prepare monthly readings sheet with occupants and ensure all check-sheets and logbooks are being filled properly as per the schedule Maintain history cards for all equipments. Attend major complaints & escalate to senior & co-ordinate with technical staff if necessary. Ensure work permits are in place and safe working practices /procedures are followed. Assist the Property Manager/ Assistant Property Manager/ Technical Manager in conducting risk assessment of the building operations and work towards mitigation of highlighted inherent risks and in conducting root cause analysis in case of system failure and breakdowns. Create corrective, preventive and emergency response action plans. Take part in evacuation Drills and be a part of ERT/QRT team. Maintain engineering and other reports like DMR and MMR. Work closely with the regional RO / HO / SME/ Training teams and ensure closures of all required reports. Facilitate the services under the Slogan No Safety No Work.

Role & responsibilities Repair, maintain, troubleshoot of charger and service electrical charging infrastructure. Handle Daily operations of all Electric Vehicle Charging Hubs of the Company. Attend & resolve technical or other issues at all locations. Maintain & Record /Report daily operational & Charging usage details. Use of CMS based operations system for National operations. Coordinate with Fleet Operation team for charger Schedule Maintenance. Coordinate with Supplier for Monthly PM Activities. Ability to handle small(3-4 person) team. Coordination with Remote Location team for Maintenance & Operation. Ability to manage safety at Site including Charger Safety. Ready to travel at other charging location of Company. Preferred candidate profile EV Charger Operation Cycles, Charger BOQ detail, Chargers Standards Preventive Maintenance, DC High Speed Chargers safety.

Role & responsibilities Repair, maintain, troubleshoot of charger and service electrical charging infrastructure. Handle Daily operations of all Electric Vehicle Charging Hubs of the Company. Attend & resolve technical or other issues at all locations. Maintain & Record /Report daily operational & Charging usage details. Use of CMS based operations system for National operations. Coordinate with Fleet Operation team for charger Schedule Maintenance. Coordinate with Supplier for Monthly PM Activities. Ability to handle small(3-4 person) team. Coordination with Remote Location team for Maintenance & Operation. Ability to manage safety at Site including Charger Safety. Ready to travel at other charging location of Company. Preferred candidate profile EV Charger Operation Cycles, Charger BOQ detail, Chargers Standards Preventive Maintenance, DC High Speed Chargers safety.

Role & responsibilities Repair, maintain, troubleshoot of charger and service electrical charging infrastructure. Handle Daily operations of all Electric Vehicle Charging Hubs of the Company. Attend & resolve technical or other issues at all locations. Maintain & Record /Report daily operational & Charging usage details. Use of CMS based operations system for National operations. Coordinate with Fleet Operation team for charger Schedule Maintenance. Coordinate with Supplier for Monthly PM Activities. Ability to handle small(3-4 person) team. Coordination with Remote Location team for Maintenance & Operation. Ability to manage safety at Site including Charger Safety. Ready to travel at other charging location of Company. Preferred candidate profile EV Charger Operation Cycles, Charger BOQ detail, Chargers Standards Preventive Maintenance, DC High Speed Chargers safety.

We are looking for a highly skilled and experienced Shift Engineer to join our team at Jones Lang LaSalle Property Consultants (India) Pvt. Ltd., located in the Real Estate industry. The ideal candidate will have 6-10 years of experience. Roles and Responsibility Manage and oversee the daily operations of the property management team. Coordinate with various departments to ensure smooth functioning of property-related activities. Develop and implement strategies to improve operational efficiency and reduce costs. Conduct regular inspections to identify areas for improvement and provide recommendations. Collaborate with the maintenance team to ensure timely repairs and preventive maintenance. Analyze data and reports to identify trends and opportunities for process improvements. Job Requirements Strong knowledge of property management principles and practices. Excellent communication and interpersonal skills. Ability to work effectively in a fast-paced environment and prioritize tasks. Strong problem-solving and analytical skills. Experience with property management software and systems. Ability to lead and motivate a team to achieve goals. Educational qualification: Any Graduate or Postgraduate degree.

Job Title: Deputy Engineer - Maintenance Job Responsibilities: Monitor Daily Production Activities: Ensure that daily production targets are met efficiently. Assist in Equipment Handling: Help set up, operate, and maintain beverage filling, packaging, and processing equipment. Follow SOPs and Quality Control: Adhere to standard operating procedures and quality control parameters. Troubleshoot Production Line Issues: Quickly address and resolve production line issues to minimize downtime. Coordinate with Maintenance Team: Work with maintenance teams to schedule preventive and breakdown maintenance. Ensure Quality Standards: Maintain product quality by following GMP and food safety guidelines. Conduct Quality Checks: Perform in-process quality checks and report any deviations. Ensure Safety and Compliance: Maintain a safe and compliant production environment, ensuring hygiene and regulatory standards are met. Collaborate with Teams: Work closely with supervisors, operators, and other stakeholders to ensure smooth operations. Train Operators and Technicians: Assist in training staff on equipment handling and safety practices. Promote Teamwork and Safety: Cultivate a team-oriented culture focused on safety, accountability, and performance. Key Skills: Production Coordination Production Efficiency Production Flow Maintenance & Repair Maintenance Engineering Required Qualifications: Education: Diploma in Mechanical Engineering Preferred Qualifications: Experience in production coordination and maintenance engineering, preferably within the beverage or food industry. Knowledge of Good Manufacturing Practices (GMP) and food safety regulations. Strong troubleshooting and problem-solving skills.

[{"Salary":null , "Remote_Job":false , "Posting_Title":"Executive Electrical Maintenance & Utilities" , "Is_Locked":false , "City":"Bangalore South" , "Industry":"Manufacturing" , "Job_Description":" Job Purpose : To ensure the smooth and uninterrupted operation of reactor systems, utilities (chillers, compressors), electrical systems, and mechanical support equipment through planned and breakdown maintenance, troubleshooting, and proactive upkeep of all related assets. Key Responsibilities: Electrical Maintenance: Inspect, troubleshoot, and repair electrical panels, control circuits, motors, and power distribution systems. Carry out preventive and corrective maintenance for plant electrical systems. Ensure timely calibration, testing, and servicing of electrical protective devices (MCBs, relays, contractors etc.). Coordinate with electrical vendors for AMC and third-party maintenance support. Reactor System Maintenance: Ensure smooth functioning of reactor-related equipment such as heaters, controllers, sensors, valves, and interlocks. \uF0D8 Perform scheduled checks on reactor electrical and control systems; assist process team during breakdowns. Utility Equipment Maintenance : Perform routine servicing and maintenance of chillers, air/CO compressors, vacuum pumps, and other equipment. Monitor utility equipment health and performance using checklistbased systems. Pump and Motor Maintenance: \uF0D8 Conduct regular checks and overhauls of centrifugal, gear, and diaphragm pumps. Replace bearings, seals, or electrical windings as needed. Documentation & Reporting: Maintain proper maintenance records, checklists, breakdown reports, and logbooks. Safety & Compliance: \uF0D8 Follow electrical safety procedures, LockoutTagout (LOTO), and arc flash protection norms. Ensure compliance with electrical and utility maintenance-related statutory requirements. Requirements Education: Diploma in Electrical Engineering Experience: 3 to 5 years in plant maintenance in chemical /

Job Title : (Executive- projects) Project Engineer_ Mechanical Experience Required : 5-8 years of Agrochemicals/chemicals in Green field/brown field Projects. JOB DUTIES AND RESPONSIBILITIES (Please mention in below table) 1 Erection, installation and commissioning of various type of static and rotary, utilities equipments & its piping work. 2 Coordination with other engineering discipline for smooth and efficient implementation of the project, engineering consultant for timely delivery of construction drawings for proper sequence of project activities, procurement and operation to ensure completion of the project on time. 3 Preparing piping BOQ from P& ID and checking and review/verifying AUTOCAD & PDMS generated equipment layouts, Piping GAs, isometrics and models. Documents review and checking like MDS,MR,DesignBasis,PMS/VDS,P&ID, Equipment G.A,Structure G.A, Piping G.A, and Isometric. 4 Handling/supervising of contractors, Evaluating and discuss with team for work schedules, monitoring the progress, supervision of works. Preparing daily/weekly progress reports. 5 Inspection of various equipment like reactor, tank, utility equipments and submit report to project manager. 6 Planning, scheduling & monitoring activities for timely completion of projects within time, quality, cost & budget parameters. 7 Should be well versed with various code and standard like ASTM, ASME B31.3, ASME 16.5,16.11,16.19 etc.

Job description Instrument break down job in shift- responsibility in shift technician Preventive maintenance & predictive maintenance Job Responsibility Technician in General shift. Instrument tube work, Instrument/panel support fabrication work- Instrument Fitter. Required Candidate profile Modification Job like a new instrument installation. Instrument position shift, ELV Technician in general shift.

Job Title: Engineer - Assembly Job Description: We are hiring a Tool Maker who will be responsible for managing end-to-end activities related to injection mold manufacturing and maintenance. The ideal candidate should have hands-on experience in tool design and injection molding processes. Key Responsibilities: Handle injection molds up to PPAP (Production Part Approval Process) stage. Coordinate closely with customers for project closure and delivery timelines. Manage breakdown maintenance and mold correction activities effectively. Collaborate with the manufacturing team for process planning and smooth mold assembly. Conduct design reviews and modifications with the engineering team. Ensure timely execution and delivery of mold projects as per customer requirements. Must Have Skills: Diploma in Tool & Die Making. Strong problem-solving and troubleshooting skills. Good understanding of injection molding processes and mold design. Effective coordination and communication with cross-functional teams. Experience in handling mold assembly, maintenance, and validation is preferred. Problem Solving Mold Making Tool Design Injection Molding

Job Title: Assistant /Deputy Engineer - Assembly Job Description: We are seeking a skilled and experienced professional to join our team as a Mold Maker . The ideal candidate will be responsible for: Handling injection molds up to PPAP stage. Coordinating closely with customers for project closure and timely delivery. Managing breakdown maintenance and mold correction activities. Collaborating with the manufacturing team for process planning and smooth mold assembly. Leading design reviews and implementing modifications in coordination with the engineering team. Must Have Skills: Tool Design Mold Making Design Drawings Injection Molding

Sr.Mechanical Maintenance Engineer - Agrochemical Industry in Gujarat. Job Title: Executive - Sr. Engineer Maintenance Department: Maintenance Experience Required: 6 to 15years Qualification:- BE/ B. Tech Mechanical JOB DUTIES AND RESPONSIBILITIES (Please mention in below table) Erection, installation and commissioning of various types of static and rotary, utilities equipment & its piping work. Coordination with other engineering disciplines for smooth and efficient implementation of the project, engineering consultant for timely delivery of construction drawings for proper sequence of project activities, procurement and operation to ensure completion of the project on time. Preparing piping BOQ from P& ID and checking and review/verifying AUTOCAD & PDMS generated equipment layouts, Piping GAs, isometrics and models. Documents review and checking like MDS, MR, Design Basis, PMS/VDS,P&ID, Equipment G.A, Structure G.A, Piping G.A, and Isometric. Handling/supervising of contractors, Evaluating and discuss with team for work schedules, monitoring the progress, supervision of works. Preparing daily/weekly progress reports. Inspection of various equipment like reactor, tank, utility equipments and submit report to Head - Project. Planning, scheduling & monitoring activities for timely completion of projects within time, quality, cost & budget parameters. Manpower planning and handling. Preparation of expense budget. Should be well versed with various code and standard like ASTM, ASME B31.3, ASME 16.5,16.11,16.19 etc. Feel free to reach me mail Experience 5 - 11 Years Industry IT Software - Application Programming Maintenance Qualification B.E Key Skills Maintenance Engineering Green Field Projects Gujarat Mechanical Maintenance Agrochemical Reactor Design

Taking care of Corporate claims process One point contact for PID Creation and New MOU fallow up & collection External Surveyors fallow-up Back support for a team and an average of 800 Payment posting Attending phone calls of customers HO Co-ordination for repair portal ID creations Roles and Responsibilities 2

Roles and Responsibilities : Ensure General and Preventive Maintenance of Plant Machinery & utilities. To lead for engineering function for entire site including project planning, New project execution and maintenance etc. Preparation of monthly engineering reports and effective monitoring of energy resources for reducing energy cost and monitor the manpower and accurate utilization for completing departmental tasks. Responsible for Calibration, Validation, Qualification Protocol & Reports. Operation & maintenance of HVAC BMS system . To work as per cGMP guidelines and upkeep the HVAC facility and all-time readiness for audit. Implementation of periodical servicing, annual maintenance, and other Engineering related works Should have practical knowledge of electrical-mechanical industrial engineering equipment installation & commissioning, Should be well equipped with Operation & maintenance, process piping, utility equipment & HVAC Installation & commissioning. Developing and Managing contract with vendor,ensuring timely availability of equipments, Spare parts, services and consumable to facilitate smooth execution. Execute activities & deliverables and prepare weekly and monthly reports. Execute GEP documentation like qualification, validation, change management, Project management and other quality-related engineering documentation. Lead work area and ensure personal safety and whole execution activity should be performed as per site safety compliance and procedures. Well knowledge of ETP plant and AHU operation is preferred. Work in Autocad, and other QMS softwares. To use the problem-solving tools to find out the root cause of any failure and implement the CAPA accordingly. Also has to take care of the operation and maintenance of remaining utilities like Chillers, hot water pumps, cooling towers, air compressors, Boilers, Water systems, ETP, Fire pump house, Electrical systems, safety compliance activities. Knowledge Required 1. 10-12 years of experience in Formulation Pharmaceutical Plant. 2. Minimum of 10-12 years of experience with Electrical & Mechanical installation, calibration, troubleshooting, HVAC O&M and Area Validation. 3. Computer proficiency in AutoCAD, MS Office, Excel, e-mail and internet functions.

Responsibilities: * Maintain machinery through breakdown maintenance * Perform fitting tasks as needed * Ensure equipment reliability within miscellaneous industry * Collaborate with production team on preventative measures Food allowance Provident fund Annual bonus Health insurance

•All CNC & VMC Mechanical Maintenance Activity •Lead mech. Maintenance team for all type of mechanical maintenance •To schedule Preventive Maintenance and to carry out break down maintenance Required Candidate profile •Responsible for QMS & EHS implementation •Responsible for frequently review and update of FMEA as well as HIRA •Monitoring of MTTR, MTBF on Monthly Basis and take further action to reduce it.

Role & responsibilities Supervise maintenance operations across multiple Pizza Hut locations. Plan and execute preventive maintenance schedules for kitchen equipment (e.g., ovens, fryers, HVAC, chillers). Ensure timely repairs of electrical, plumbing, refrigeration, and mechanical systems. Conduct regular store audits to assess facility and equipment conditions. Coordinate with external vendors for specialized repair services. Maintain equipment history, breakdown logs, and maintenance records. Support restaurant teams during emergencies or breakdowns. Monitor inventory and ensure availability of critical spare parts. Ensure all maintenance activities comply with health, safety, and food hygiene standards. Preferred candidate profile 35 years’ experience in maintenance roles within QSR, hospitality, or retail environments. Strong knowledge of commercial kitchen equipment and HVAC systems. Ability to handle multi-location maintenance needs. Working knowledge of electrical, mechanical, and plumbing systems.

Department: Maintenance Experience Required: 6 to 15years Qualification:- BE/ B. Tech Mechanical JOB DUTIES AND RESPONSIBILITIES (Please mention in below table) - Erection, installation and commissioning of various types of static and rotary, utilities equipment & its piping work. - Coordination with other engineering disciplines for smooth and efficient implementation of the project, engineering consultant for timely delivery of construction drawings for proper sequence of project activities, procurement and operation to ensure completion of the project on time. - Preparing piping BOQ from P& ID and checking and review/verifying AUTOCAD & PDMS generated equipment layouts, Piping GAs, isometrics and models. Documents review and checking like MDS, MR, Design Basis, PMS/VDS,P&ID, Equipment G.A, Structure G.A, Piping G.A, and Isometric. - Inspection of various equipment like reactor, tank, utility equipments and submit report to Head - Project. Educational and Qualification Requirement (Please mention in below table) - BE/ B. Tech Mechanical and related field or equivalent work experience (6+ Years of exp in Agrochemicals chemicals in Green field/brown field Projects will be an advantage)..

Plants Maintenance, Electrical Maintenance, Well versed with Compliance related to MSEDL, Electrical Inspector, PWD Work, Fire Safety, Environment, Health, Safety, STP, ETP.

Experience Required: 4 of Agrochemicals/chemicals in Green field/brown field Projects. JOB DUTIES and RESPONSIBILITIES 1. Erection, installation and commissioning of various types of static and rotary, utilities equipment & its piping work. 2. Coordination with other engineering disciplines for smooth and efficient implementation of the project, engineering consultant for timely delivery of construction drawings for proper sequence of project activities, procurement and operation to ensure completion of the project on time. 3. Preparing piping BOQ from P& ID and checking and review/verifying AUTOCAD & PDMS generated equipment layouts, Piping GAs, isometrics and models. Documents review and checking like MDS,MR, Design Basis, PMS/VDS, P&ID, Equipment G.A, Structure G.A, Piping G.A, and Isometric. 4. Handling/supervising of contractors, Evaluating and discussing with the team for work schedules, monitoring the progress, supervision of works. Preparing daily/weekly progress reports. 5. Inspection of various equipment like reactor, tank, utility equipment and submit report to project manager. 6. Planning, scheduling & monitoring activities for timely completion of projects within time, quality, cost & budget parameters. 7. Should be well versed with various code and standards like ASTM, ASME B31.3, ASME 16.5,16.11,16.19 etc. 8. Bill verifications/ measurement checking as per tender conditions. 9. Prepared All types of documents related to job (Daily Report, Material Inventory Status, BOM, BOQ), giving instructions for usage of safety equipment During job execution to prevent accidents. Conduct tool box talk before new work starts. Instruct Usage of PPEs., 10. Actively manages projects from the field, addressing issues that arise during construction and providing resolution at site.