28 Bldc Motor Jobs

Role & responsibilities Preferred candidate profile Quality-BLDC Motor (Only need to apply) Department: Designation IQC - Engg 2 -4 Years PQC- Incharge - 3- 6 Years PQC - Engg 3- 6 Years PQC - Engg -2- 4 Years OQC Engr -2- 4 Years

Hi Folk, Hiring for the role of Motor Control and would request you to kindly share your acknowledgement to process your candidatures for the role. Qualifications:- BE/B.Tech, ME/M.Tech in Computer Science Experience:- Years of experience : 5-12 years Job Descriptions :- Experience in Motor Controller Firmware development (BLDC Motor/PMSM Motor/Induction Motor/Inverters). 2. Exposure to Power Electronics hardware development and debugging using Oscilloscope/Current probes. 3. Field Oriented control (Should have knowledge in Motor control software development), 6-step commutation control methods. 4. Experience in motor control parameter tuning and Algorithms for same. 5. Embedded C 6. Experience in MATLAB/Simulink modelling for power electronics-based applications. 7. Experience in Software development for electric vehicle in BLDC Motors, automotive and LV, HV applications in home appliances, automotive etc. 8. Hands on experience working on ARM Cortex-M/A based microcontrollers

Job Title: Internship Trainee Mechanical Engineering Position: 4 Positions Available Location: Primary Office: Gurgaon (NCR) Field Travel: Gujarat (Bhuj District) and Rajasthan (Jaisalmer) About the Role: We are looking for bright, motivated Mechanical Engineering graduates to join our team as Internship Trainees. Successful candidates will undergo a structured training period focused on design, development, and manufacturing of innovative electromechanical solutions in the renewable energy sector. Upon successful completion of the training, you will be considered for a full-time job role with our organization. Key Responsibilities: Design & Development Projects: Solar Module Cleaning Robot: Assist in design and manufacturing. Selection and integration of motors, wheels, battery systems, and control components. Electric Vehicle (Trolley): Design and manufacture of an electric trolley with the following specifications: Load Capacity: 700 kg Speed: 19 meters/minute (~1.14 km/hr to 2 km/hr) Application Terrain: Desert, sand, and uneven surfaces Contribute to the preparation of technical drawings, bills of materials, and testing protocols. Field Activities: Participate in installation, commissioning, and service support activities at project sites in Gujarat and Rajasthan. Documentation & Reporting: Prepare project reports and maintain records of design calculations, test results, and performance data. Mandatory Requirements: Educational Qualification: Bachelors Degree in Mechanical Engineering with First Class marks. Technical Skills: Fundamental understanding of: Engineering design principles Hydraulics Electromechanical engineering concepts relevant to applications like Hydro Projects, Wind Turbines, and Solar Power Communication Skills: Proficiency in spoken and written English Other Requirements: Demonstrated ability to learn and apply technical concepts independently. Willingness to travel frequently to project sites in Gujarat and Rajasthan. Remuneration: Stipend: Negotiable during the training period. Salary: Negotiable upon successful completion of the internship. Career Growth: This internship offers a unique opportunity to gain hands-on experience in high-impact renewable energy and electromechanical projects, with a clear pathway to a permanent position. How to Apply: Interested candidates meeting the above criteria can submit their updated CV and a brief cover letter highlighting relevant skills and motivation for the role.

Manager Purchase: ? Managing & controlling the activities of ordering, receiving & inventory. ? Ensuring to cater the proper material flow to assembly for daily rollout & spares in accordance to the monthly plan given by planning department. ? Ensuring the PURCHASE order and job order materials are timely closing. ? Monitor stock for daily rollout production daily basic to controlling the stock level. ? Ensuring and verify the quality issues in daily rollout parts and communicate with vendors closing of correction action properly. ? Controlling the quatrain zone for returning rejection material to vendors for rework. ? Ensuring and monitoring with the supplier for all our input requirement of product are updated as per latest requirement. ? Developing alternate vendors for the existing components to ensure the smooth flow, cost reduction and avoid delivery failure. ? Coordinating with quality for approval process of new supplier. ? Support costing team for cost reduction activities. ? Supporting R&D team for design changes in existing parts. ? Liaison with the finance team for scheduled payment release. ? Raising advance payment request for AP suppliers. ? Maintaining the vehicles for logistics in collection, delivery aspects and adhere the drive team for the company policies. ? Working with CFT team for component development, quality issue and store issues. ? Controlling the QMS documentations as per requirement. Interested please call Mithra (HR) 9176616016

OEM Sales, Product costing background, RFQ, dealing with customer of Electric Vehicle manufacturer. Data management and analysis, RFQ Management, preparation of NFR & PFR for all RFQs handled for respective product line like BLDC Motor, PMSM Motor Required Candidate profile candidate must have experience of any type of electric motor ( traction motor, hub motor, BLDC Motor, brush motor, brushless motor) either for EV or any domestic appliances manufacturer

Design and development of BLDC/PMSM/SRM Motors, 3D Modeling of motors and controllers, Make design inputs Interact with designer to make 3D design Design of assembly, parts, Make drawings Proto making

Mechanical motor design like Traction Motor, PMSM, BLDC using CATIA V5 R29 modeling software Motor Design Proto, Mass Production Phase Design powertrain system design for EV motor, DFA, DFM, motor bearing selection, tolerance stack-up analysis,

Urgent hiring... Motor Controller 5-12 yrs Bangalore 0-30 Days Skills-Motor Controller Firmware development, BLDC/PMSM/Induction Motors/ Power electronics, Matlab, Simulink , Microcontroller, ARM Cortex, Software / hardware Development

Embedded SW- Pune leads(5+yrs is also fine) Microcontroller, Cortex/ARM C/C++ Programming, BLDC motor Understanding motor control algorithms such as the sensored, Sensorless, field-oriented control. Background with Cortex-M series embedded SW development in C Extensive experience with real time embedded software engineering and control design Proficiency in C languages for embedded software and object-oriented programming (C++) Experience to develop automotive serial communication such like LIN and CAN Full software lifecycle experience (ASPICE L2) Analyse, review, manage and trace software requirements. Proficiency in debugging complex issues. Proficiency in understanding complex software architecture definition that leads to software code development. GitLab, or any other version control and issue tracking systems Familiarity with hardware communication protocols such as SPI, I2C, UART. Participate in coding reviews using Code Collaborator Familiarity with software compilers such as IAR Workbench or ARM Keil Use oscilloscopes, logic analysers and other hardware related inspection tools Challenge workflows and recommend processes for improvement.

Are you passionate about cutting-edge motor technology? We are looking for a Product Development Engineer with 27 years of experience in PMSM/BLDC motor and controller development to join our dynamic team. What You'll Do: Develop and test electromechanical products including BLDC/PM motors and generators Translate customer inputs into actionable design specifications Collaborate across teams to deliver innovative, high-performance products Optimize machine performance through design, materials, and thermal improvements Solve key challenges in noise, vibration, durability, and wear & tear Who You Are: B.Tech in Electrical Engineering Experienced in BLDC motor/controller design & development Analytical, innovative, and ready to shape the future of mobility and energy systems

Full time with century old top Japanese MNC JOB SUMMARY ( Full time with Super Top Japanese MNC) JD for Motor Control Algorithms Requirement (6 to 12 years Experience): Experience in Motor Controller Firmware development (BLDC Motor/PMSM Motor/Induction Motor/Inverters) 2. Exposure to Power Electronics hardware development and debugging using Oscilloscope/Current probes 3. Field Oriented control (Should have knowledge in Motor control software development), 6-step commutation control methods. 4. Experience in motor control parameter tuning and Algorithms for same. 5. Embedded C 6. Experience in MATLAB/Simulink modelling for power electronics-based applications 7. Experience in Software development for electric vehicle in BLDC Motors, automotive and LV, HV applications in home appliances, automotive etc. 8. Hands on experience working on ARM Cortex-M/A based microcontrollers

Job Summary: We are seeking a Control System Engineer to join our dynamic team. The ideal candidate will have experience in control systems design and analysis, a strong command of MATLAB/Simulink for system modelling and simulation, and proficiency in C programming. Knowledge of BLDC (Brushless DC) motor control is highly desirable. This is an excellent opportunity for an engineer with at least 1 year of professional experience to work on innovative projects in the field of high end gyro-stabilized platform, robotics, and embedded systems. Key Responsibilities: Design, develop, and implement control systems for complex applications, ensuring optimal performance, reliability, and stability. Use MATLAB/Simulink to model, simulate, and analyze dynamic systems for control algorithms and performance testing. Design and implement control strategies for BLDC motors, ensuring efficient and smooth operation. Conduct system integration and test the performance of control systems in real-world conditions. Collaborate with cross-functional teams including hardware engineers, software developers, and system architects to meet project requirements. Troubleshoot and debug control system issues in both software and hardware. Participate in continuous improvement efforts to enhance system performance and control strategies. Document design processes, testing procedures, and system performance results. Required Qualifications: Bachelors degree in Electrical Engineering, Electronics Engineering, Mechatronics, or a related field/ Masters degree in Control System Engineering/ PhD degree in Control System Engineering. 1+ years of experience in control system design and implementation. Strong proficiency in MATLAB/Simulink for control system modelling and simulation. Experience with control algorithms (PID, state-space, adaptive control, etc.) and real-time system implementation. Hands-on experience with BLDC motor control algorithms and associated hardware. Ability to work both independently and in a team-oriented, collaborative environment. Strong problem-solving skills and attention to detail.

Role & responsibilities : 1. Proven hands-on experience in Embedded C/C++ development, specifically for STM32 microcontrollers (ARM Cortex-M series). 2. Deep understanding of the CAN bus protocol, including message addressing, filtering, error handling, and firmware-level integration. 3. Experience in developing drivers and control algorithms for motors (Stepper, BLDC, DC) including closed-loop control. 4. Capability to design schematics and PCB layouts, with hands-on experience in hardware bring-up and debugging. 5. Familiarity with embedded communication protocols including Ethernet, Wi-Fi, Bluetooth Low Energy (BLE), and MQTT. 6. Understanding of EMI/ESD protection and best design practices for robust hardware. 7. Deep understanding of the CAN bus protocol, including message addressing, filtering, error handling, and firmware-level integration. 8.Strong problem-solving skills across both firmware and hardware domains, with the ability to work closely with electrical and mechanical teams. Preferred candidate profile : 1. Basic understanding of Linux-based operating systems, including command-line tools, shell scripting, and driver-level concepts. 2. Familiarity with Git and modern branching workflows (e.g., GitFlow, trunk-based development). 3. Exposure to NXPs LPC series microcontrollers and related development environments. Interested candidate kindly share me your updated CV at jeevabvr@gmail.com

Role & responsibilities - Lead prototype activities including specification finalization, CAD packaging, and horizontal deployment. Develop scalable motor and Motor Control Unit (MCU) solutions for rapid adaptation and deployment. Spec optimization through winding variation and rare earth material usage • Oversee schematic design, BOM finalization, DFMEA, and layout development. Monitor technological trends and support marketing teams with comparative vendor analysis. Work extensively on PMSM and BLDC motors, perform MCU tuning and calibration to meet speed and torque requirements. Drive VAVE (Value Analysis & Value Engineering) initiatives and define continuous improvement roadmaps.

Architect, design, and develop high-performance firmware for motor control applications using FOC, vector control, and sensorless control techniques. Implement and optimize real-time embedded firmware on MCUs (TI C2000, Infineon Aurix/XMC, STM32).

Role & responsibilities : Application engineering tasks connected with the new projects (including clarification of customer technical requirements) and already running projects on the local market. Support on technical communication between the customers, MAHLE development department and MAHLE quality department Support of drive system setup at customer site including parametrization and drive system tuning Participation and support at customer's (lab and vehicle) testing during the complete validation phase Investigation of drive system technical issues at customer development department, at customer production and in the field Design of less complex customer dedicated test set-ups and testing of drive systems Collection of common technical information valid specifically for the local market Promotion activities of MAHLE drive systems on the local market Diagnosis for automotive traction drive systems and subsystems (e.g. inverter, E-motor, transmission, controls,) with the application-/traction drive-SW and vehicle behavior (torque controls, .) Work experience requirements : Electrical & Electronics communication experience in motor control system design or integration. BLDC, Induction and PMS motors Broad technical knowledge of main elements for electric/ hybrid vehicle powertrains Experience in calibration of off-the-shelf motor controllers. Excellent problem definition and problem-solving techniques. Control engineering with the focus on control algorithms for electric motors Vehicle communication networks and diagnostics with focus on CAN bus protocols Embedded systems hardware and software design Understanding of vehicle control architecture. Understanding of vehicle network protocols (CAN) Education requirements : B.E in Electrical and Electronics / Mechatronics / E&I with 3 to 6 years of experience in handling motors and controllers.

Hiring for Mechanical Design Manager - Motors & Drives Experience: 12 - 20 Years Education: BE - Mechanical Group Relevant Experience: Expertise in Motors and Drives Design Keyskills: Design Development, Project Management Role & responsibilities Ensure motor mechanical design management (plan/do/check/report) and related R&D technical activities from customer requirements and electro technical design file, with respect to Design For Quality process and IRIS/ISO14001 standards, Deliver design file: 3D, drawings, motor sizing/basic stress analysis (with the support of stress and bearing experts), validation file, supporting analysis documentation, Manage functionally allocated industrial designers to perform design file, with respect to allowed budget and planning, Manage the drawing design review procedure during detailed design phase and follow up related actions Ensure mechanical interfaces and motor integration, Work closely with purchasing and industrialization sectors to involve suppliers in order to ensure manufacturing at the best costs, Contribute to motor validation plan (FMEA, risk mitigation plan (mock-up, tests, )), Validate the customer drawings file and maintenance book, Manage design change and waiver requests related to non-compliances, Support manufacturing, quality and purchasing sectors and participate actively to cost reduction actions Contribute or manage trouble shooting actions Preferred candidate profile Ability to project management (plan/do/check/report) Master mechanical system design (functional dimensioning, norms and standards, bearing architecture, manufacturing constraints, material implementation, sizing), Skilled practice of design tool Catia V5, DMA design model management tool, office system

Senior Embedded Firmware Engineer Experience: 8 - 12 Years Exp Salary: Competitive Preferred Notice Period: 30 Days Opportunity Type: Onsite (Noida, UK) Placement Type: Full-time (*Note: This is a requirement for one of Uplers' Clients) Must have required skills: BLDC motors, Motors, Power electronics Addverb (One of Uplers' Clients) is Looking for: Senior Embedded Firmware Engineer who is passionate about their work, eager to learn and grow, and committed to delivering exceptional results. If you are a team player, with a positive attitude and a desire to make a difference, then we want to hear from you. Role Overview Description Senior Embedded Firmware Engineer Embedded Systems Reports To DGM or above Purpose of the role The incumbent will be responsible for designing, implementing, and optimizing firmware for high-performance motor control applications, specifically focusing on Field-Oriented Control (FOC) for BLDC, PMSM, and other electric motors. The role involves working closely with cross-functional teams to develop scalable and efficient solutions for motor performance optimization and power systems. The candidate will ensure the integration of robust control algorithms and power management solutions, leveraging expertise in TI (C2000 series), Infineon (Aurix, XMC series), and ST Microcontroller (STM32 series) ecosystems. This role will also require exploring innovative technologies to enhance motor efficiency and may involve occasional travel for system integration and support. Technical Skills Required Expertise in FOC based motor control Proficiency in C/C++ for embedded systems, including RTOS-based and bare-metal firmware development Expertise in control theory, power electronics and motor dynamics. Familiarity with TI C2000, Infineon Aurix/XMC, and ST Microcontroller (STM32) ecosystem for FOC solutions. Familiarity with CAN, SPI, UART, I2C, and other communication protocols. Experience with digital signal processing (DSP) techniques and fixed/floating-point arithmetic. Knowledge of ISO 26262, IEC 61508, or other safety-critical standards Behavioural Skills Required Problem-Solving Attention to Detail Team Collaboration Adaptability Communication Time Management Critical Thinking. S. No. Job Responsibilities Architect, design, and develop high-performance firmware for motor control applications using FOC, vector control, and sensorless control techniques. Implement and optimize real-time embedded firmware on MCUs (e.g., TI C2000, Infineon Aurix/XMC, STM32, or similar platforms). Develop and refine control algorithms to improve motor efficiency, torque response, and dynamic performance. Work with power electronics engineers to integrate motor control firmware with hardware for inverters, converters, and drives. Utilize Matlab/Simulink, Python, or C/C++ to model, simulate, and validate control algorithms. Conduct system-level analysis, including power consumption, thermal management, and EMI mitigation. Implement fault detection, diagnostics, and safety mechanisms for robust operation in industrial and automotive applications Collaborate with cross-functional teams, including hardware engineers, mechanical engineers, and system architects, to ensure optimal motor and power system performance Lead firmware optimization efforts, including code profiling, memory management, and CPU utilization improvements. Stay updated on industry trends, emerging technologies, and advancements in motor control, power systems, and embedded firmware development. Minimum Qualification Bachelor's or master's degree in electrical engineering, Computer Engineering, Embedded Systems, or a related field Years of experience 8-10 years of experience About Uplers: Our goal is to make hiring and getting hired reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant product and engineering job opportunities and progress in their career. (Note: There are many more opportunities apart from this on the portal.) So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you!

Responsibilities: * Assemble motor components according to specifications * Test motors for quality and functionality * Wind coils using specialized equipment * Collaborate with production team on BLDC motor projects

PCB Designer, PCB layout design, testing, certification, Hardware design, circuit design, BLDC Motor tools ; any - Altium / Cadence Allegro / Mentor Xpedition / Valor NPI / PDN Analyzer / LT Spice / ORCAD / dip trace multilayer pcp designing

- Job Responsibilities: Support for the design of embedded software (C language) for automotive brushless motor products, and participate in the design of the overall system scheme and the determination of software control algorithms Support for the construction of embedded software architecture, code writing and debugging, and system testing Support for product testing and monitoring, design of calibration software Support for the subsequent continuous improvement of product software Support for ASPICE process documentation and auditing for automotive SW projects Job requirements: Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation , and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network ( CAN/LIN protocol ), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

JOB DESCRIPTION / SKILLS REQUIRED Assist in the design and selection of traction motors (PMSM, BLDC, Induction) for 3W, LCV, and HCV EV applications. Support motor performance optimization, including efficiency, torque, and thermal management. Conduct motor simulations using MATLAB, Ansys, JMAG, or Motor[1]CAD. Work on motor control strategies, including FOC (Field-Oriented Control) and torque-speed optimization. Assist in motor testing, validation, and dyno testing as per industry standards. Ensure EMI-EMC compliance and assist in addressing motor-related EMI issues. Support motor integration with VCU, battery, and powertrain systems. Assist in CAN communication setup, creating motor-related CAN matrix and DBC files. Analyse motor-related field issues, conduct fault diagnosis, and support warranty claims. Contribute to next-gen motor technology development and innovation. AREAS OF SPECIALISATON Experience with motor design and simulation tools (MATLAB, Ansys, Motor-CAD). Understanding of motor control techniques (FOC, DTC, PWM strategies). Hands-on experience in motor testing, NVH analysis, and thermal management. Basic knowledge of EMI-EMC compliance and ISO 26262 functional safety. Strong problem-solving, teamwork, and communication skills.

Role & responsibilities Developing of Firmware on DSP, microcontroller , ARM based Embedded hardware using C,C++, motor control applications Development of Software on embedded system with Real Time Linux or RTOS concepts using C , C++ for embedded systems. Software/ Firmware development to be done in Structured manner . Testing plans also to be defined during software development , procedures like unit testing , integration testing, acceptance testing to planned in software development, DVPNR reports. Development of Software for CAN BUS, MOD BUS , SPI BUS, customized Ethernet protocols for AC servo drives and electronic control Systems Preferred candidate profile. BE from known reputed college. Min 5 years of exp in firmware development Good knowledge on Electronic Circuit Devices and Digital Electronics. Good Documentation skills in using Excel, Word. Power Point Passed out with distinction in Engineering in all subjects Should have successfully completed the Project assignment on his own or with specific contribution to the group project .

Experience in embedded design Hardware, Power electronics and analog electronics & Project management, Knowledge of Hardware debugging, knowledge of PCb layout, Layout & Schematics Validations, Hardware testing & debugging, Knowledge of EMI & MC

Role & responsibilities Design and develop advanced mechatronic systems in EV vehicles specifically to Cars. Create technical drawings and specifications using SolidWorks, CATIA, AutoCAD) Have support design validation and manufacturing processes. Should collaborate with all other teams of electrical, mechanical and software engineers, to make good integration among all the automotive system. Conduct simulations and performance analyses to validate designs against automotive standards and requirements. Make troubleshoot and optimize the designs for to improve the performance, efficiency to the real world conditions Prepare and handle the comprehensive documentation, including design, test plans, and user manuals. Should update with the industry trends and emerging technologies in automotive mechatronics to drive innovative solutions. Responsible in the areas of BLDC motors and electromagnetics. Preferred candidate profile Experienced in low voltage BLDC motors is Prefered Inerested Contact : 9890984547 (Bhyrava) share the respose to bhyrava@bvrpc.com