378 Blast Jobs - Page 11

Overall responsibility for the daily management of all labour resources within the paint shop and manufacturing area To ensure all scheduled maintenance is carried out on all blast & paint plant To identify training needs and arrange approved training as necessary to working crew members To attend daily management briefings To ensure customer specifications are reviewed and achieved To ensure all quality and environmental procedures are adhered to To liase with internal/external customer To maintain an acceptable standard of cleanliness / housekeeping by conducting daily audits Schedules, assigns, and plans the work of paint shop & yard contractor personnel performing a variety of painting projects Estimate material and labour Train or inform employees of new work methods or procedures, changes in safety regulations. Ensures budgeting guidelines are met; prioritizes shop expenditures to stay within budget; assists in preparation of operations budgets. Show more Show less

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Rockwell Automation is a global technology leader focused on helping the world’s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better. We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that’s you we would love to have you join us! Job Description Job Summary: Collaborate within a team to execute and deliver engineering tasks across multiple automation projects in diverse industry sectors for global clients, ensuring adherence to quality, cost, and schedule expectations while maintaining high customer satisfaction. Oversee and ensure the successful and timely completion of on-site activities in alignment with customer requirements. You will report to the Team Lead. Your Responsibilities: Be prepared to travel frequently to project sites to troubleshoot and resolve technical issues. Ensure timely, high-quality, and cost-effective execution of assigned projects, maintaining strong customer satisfaction. Provide process domain expertise and solutions aligned with industry standards. Collaborate with regional Project Managers to deliver engineering services effectively. Lead, supervise, and monitor all phases of project execution to ensure successful implementation. Manage and report on multiple project deliveries, ensuring adherence to processes, budgets, schedules, and quality standards, while identifying opportunities for value addition. Mentor and support the development of fellow project engineers. Assist Project Managers in scope management, including the development of Work Breakdown Structures (WBS). Participate in resolving engineering execution escalations and work with the GEBS Engagement Manager and regional stakeholders to ensure proper closure and conduct lessons learned sessions. Support regional teams in pursuing large-scale project opportunities. Escalate issues promptly to appropriate stakeholders to support overall project success. Continuously enhance personal engineering skills and share best practices to strengthen team capabilities. Provide technical support to the Team Leader / Lead Engineer. Collaborate closely with the Team Leader / Lead Engineer to ensure customer acceptance of project deliverables. Maximise the use of standard products and reusable engineering components in project delivery. Assist the Team Leader in managing technical risks and resolving technical challenges. Drive cost reduction through process improvements, manufacturing efficiencies, and the development of reusable or standardised engineering solutions. Demonstrate technical and application expertise to secure repeat business and maintain high levels of customer satisfaction. The Essentials - You Will Have: Bachelor's degree in Instrumentation, Electrical, or Electronics Engineering. 4 to 9 years of hands-on experience in automation engineering, specifically in PLC and drive system applications, including engineering design and implementation. Proven experience across the entire project lifecycle, from the design phase through to commissioning. Strong interpersonal, organizational, and communication skills—both written and verbal—are essential for effective collaboration and project execution. The Preferred - You Might Also Have: Proficient in Integrated Architecture, Component and Architecture Class Standard Drives, and Drive Migration/Upgradation at an intermediate level. Possesses industry knowledge, particularly in Metal Processing Lines (e.g., CGL, CCL, Slitter, Rewinding Lines), Coordinated Drive Systems, Casters, Blast Furnaces, and Hot Rolling Mills. Also demonstrates intermediate expertise in application engineering, training delivery, and a foundational understanding of Project Management and EHS (Environment, Health & Safety). Experienced in selecting AC and DC drives based on motor load and application requirements. Strong working knowledge of AC/DC drive systems tailored to applications such as metal processing lines. Good hands-on experience in commissioning PLCs and drive systems. Technically proficient in selecting electrical switchgear and components for drive applications, including fuses, contactors, and chokes. Familiar with various electrical standards such as NEMA, IEC, and UL508, with knowledge of these standards considered an added advantage. What We Offer: Our benefits package includes … Comprehensive mindfulness programmes with a premium membership to Calm. Volunteer Paid Time off available after 6 months of employment for eligible employees. Company volunteer and donation matching programme – Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation. Employee Assistance Program. Personalised wellbeing programmes through our OnTrack programme. On-demand digital course library for professional development. ... and other local benefits! At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles. #LI-Hybrid #LI-RS1 Rockwell Automation’s hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Company Description Harsco Corporation is a market-leading, global provider of environmental solutions for industrial, retail and medical waste streams, and innovative equipment and technology for the rail sector. We have an unrivalled breadth of experience across the globe and an impressive reputation stretching back more than a century. Based in Camp Hill, PA, with more than 13,000 employees and the company operates in more than 30 countries. About Harsco Environmental Harsco Environmental is the premier provider of material processing and environmental services to the global steel and metals industries. Our onsite mill services and resource recovery services offer sustainable solutions that maximize environmental benefit and return valuable raw material into production. We also have developed a range of by-products for specialized applications across industry, construction and agriculture, which utilize Harsco’s expertise in mineral materials. Job Description plan daily production schedule for the slag and scrap Handling and processing. implement and control the production schedule review and adjust the schedule where needed determine the material resources required manage human and material resources to meet production targets make decisions about equipment use, availability and utilization. Coordination with Maintenance department to optimize availability of resources. Coordination with Customer on daily basis. Plan the entire team to operate efficiently in all the three shifts. work out and implement standard operating procedures for production operations ensure that standard operating procedures are adhered to ensure implementation and adherence to health and safety procedures monitor quality standards of products implement and enforce quality control and tracking programs to meet quality objectives Uphold all ISO, GBP and OSHA standards applicable to the responsibilities above Qualifications Require a bachelor's degree in mechanical Engineering, Production Technology, industrial engineering with a experience in steel melt shop or blast furnace at least 05 years and above. Good computer skills. Show more Show less

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less