55 Battery Management Jobs

Company: Waaree Energy Storage Solutions Private Limited Job Title: Head - BMS/PCS/EMS Location: Dungri - Rola About Waaree Energy Storage Solutions Pvt Ltd Waaree Energy Storage Solutions Pvt Ltd is a wholly owned subsidiary of Waaree Energies Limited, India's leading solar PV module manufacturer and energy solutions provider. The company specializes in advanced battery energy storage systems (BESS) that transform renewable energy into reliable, continuous power. As part of Waaree Group, it leverages extensive experience in solar and energy storage to deliver cutting-edge solutions. Job Summary The Head - BMS/PCS/EMS will lead the design, development, and integration of Battery Management System (BMS), Power Conversion System (PCS), and Energy Management System (EMS) for Waarees solar energy storage projects. This role will ensure safe, reliable, and efficient operation of energy storage assets, coordinate vendor integration, conduct safety function analysis, and manage compliance with applicable standards. Key Responsibilities Lead the end-to-end management of BMS, PCS, and EMS subsystems in solar BESS projects. Ensure hardware and firmware safety functions for DC to AC conversion and battery protection. Conduct safety function analysis to comply with industry standards and regulatory requirements. Identify and evaluate vendors, plan and execute integration of BMS, PCS, and EMS components. Collaborate with engineering, procurement, and project teams to ensure project milestones and quality standards. Oversee documentation for system design, integration plans, safety protocols, and compliance certifications. Optimize system performance and lifecycle costs through advanced EMS control strategies. Stay current with new technologies, standards, and best practices in energy storage systems. Mentor and lead the technical team focused on BMS/PCS/EMS development and support. Qualifications Bachelors or Masters degree in Electrical Engineering, Power Systems, or relevant fields. Minimum 10 years experience in renewable energy or battery storage systems, with leadership responsibility in BMS/PCS/EMS. Strong knowledge of battery safety, power electronics, and energy management software. Experience in vendor coordination, integration planning, and compliance management. Familiarity with solar energy storage projects and grid interfacing requirements. Desired Skills Expertise in BMS functionalities including monitoring, safety, and battery health management. Understanding of PCS systems for DC-AC power conversion and safety enforcement. Proficient in EMS for energy optimization, system monitoring, and control. Safety function analysis and regulatory compliance knowledge (IEC, UL, MNRE, CEA). Strong communication, project management, and leadership skills.

We are looking for a motivated Junior Engineer/Technologist to join our startup team in Hyderabad. The selected candidate will assist in battery assembly operations . Location: Hyderabad Duration: 1-year term Availability: Immediate

Role & responsibilities - Able to define the battery capacity needed in kWh based on customer and product requirements. Able to assess multiple cell technologies (LFP vs NMC, Prismatic vs Blade) and arrive at the right cell technology to meet the product level requirements in terms of range, durability, thermal safety, performance, charging time, etc. Define the battery pack architecture to package maximum number of cells within the given volume target and weight target. Define the cooling system needed to ensure battery safety in all operating conditions without any risk of cell overheating and thermal run-away. Deep understanding of cell chemistry, battery architecture, cell voltage balancing, Battery management system and battery robustness. Technical expertise on Battery robustness against thermal, vibration, water immersion and impact. Understanding of battery charging to enable fast-charging with DC and regular charging with AC without any thermal overload in the system ensuring battery safety. Ability to integrate motor and battery with requirement acceleration performance and recuperation levels. Understanding of multiple powertrain modes, recuperation modes to offer multiple choices to customer and also to extract maximum range by recuperation. Engineer the battery and powertrain as modular systems to cater to wide range of products with minimum change to ensure reduced development lead time, cost, investment and efforts.

Description We are seeking a skilled Heavy Auto Electrician with expertise in cranes to join our team in India. The ideal candidate will have extensive experience in diagnosing and repairing electrical systems in heavy machinery, particularly cranes, ensuring optimal performance and safety. Responsibilities Perform electrical diagnostics and troubleshooting on cranes and heavy vehicles. Install, maintain, and repair electrical systems and components on cranes. Conduct routine inspections and preventive maintenance on electrical systems. Collaborate with mechanical teams to ensure overall equipment functionality. Document all work performed and maintain accurate records of repairs and maintenance. Adhere to safety protocols and regulations while working on electrical systems. Stay updated with the latest technologies and advancements in auto electrical systems. Skills and Qualifications 5-6 years of experience in auto electrical work, specifically with cranes or heavy vehicles. Proficient in reading and interpreting electrical schematics and diagrams. Strong knowledge of electrical systems, components, and diagnostic tools. Experience with troubleshooting and repairing electrical faults in heavy machinery. Ability to work independently and as part of a team in a fast-paced environment. Familiarity with safety standards and regulations related to electrical work. Relevant certifications in auto electrical work or heavy machinery maintenance.

Role & responsibilities Define specifications and requirements for product hardware. Conduct hardware design and firmware control reviews with a focus on high-level system integration. Monitor development and create test plans to verify electrical, environmental, and functional compliance. Perform FMEA (Failure Modes and Effects Analysis) to evaluate reliability and ensure there are no safety or liability concerns related to the product. Coordinate and track product development milestones with the project manager and cross-functional teams (CFTs). Oversee DFX (Design for Excellence) updates, Engineering Change Notices (ECNs), and product life cycle management. Mentor the team on design to ensure that established technical standards are adhered to during product development. Research new development concepts to guide future product innovation. Identify cost-competitive technological alternatives that are suitable for scaling up. Validate design concepts through a combination of circuit simulations and prototyping. Prepare documentation, including bills of materials, circuit diagrams, simulations, design-related documents, and FMEAs. Preferred candidate profile Masters degree in Power Electronics with 10 to 17 years of experience. Strong understanding of closed-loop control for power converters and compensator design. Experience with high-speed or high-power semiconductor devices, specifically power converter designs over 100kVA and in medium voltage applications. Solid technical knowledge, competence, and system-level design experience. Proven track record of managing multiple power electronics projects involving analog and digital electronics as well as control circuitry. Experience in EMI (Electromagnetic Interference) filter design and product qualification/compliance testing. Familiarity with circuit simulation tools like SIMULINK. Skills in derating, FMEA, and reliability analysis. Excellent circuit debugging and troubleshooting capabilities. Experience in writing technical documents such as hardware requirements, product design specifications, test specifications, and board-level design details. Strong knowledge of component selection and system integration. Good communication skills in English, both spoken and written. Experience mentoring small teams with strong decision-making capabilities and the ability to work effectively in an agile product development model. What can you expect: Experience with the latest technologies in power converters for applications involving grid connections and renewable energy. A supportive environment that enhances your design and debugging skills. Collaboration with a team of motivated and enthusiastic engineers.

The Diploma Electrical Technician is a crucial member of the Research and Development (R&D) team, focusing on Vehicle Control Units (VCU) and Battery Box components. You will be responsible for creating Bill of Materials (BOM), verifying battery designs, updating Material Requisitions (MR), managing stock, planning production, overseeing bus bar templates, participating in battery assembly and testing, coordinating procurement, leading site installations and testing, supporting trial runs and shore charging tests, providing on-site maintenance, and assisting the Annual Maintenance Contract (AMC) team. You will collaborate closely with cross-functional teams to ensure seamless integration and optimal performance of electrical systems across projects. The ideal candidate should hold a Diploma in Electrical Engineering or equivalent, have a minimum of 2 years of hands-on experience in electrical system handling, preferably in battery systems or automotive applications, possess strong technical knowledge of electrical circuits, VCUs, and battery management, exhibit good troubleshooting, diagnostic, and problem-solving abilities, demonstrate experience in on-site electrical installations and maintenance, and have the ability to work independently and collaboratively in dynamic environments. The salary range for this position is 18,000 - 20,000 per month. This is a full-time job with a day shift schedule. The work location is in Cherthala, Kerala, and the ability to commute or relocate is required before starting work. Application Question: What is your expected salary ,

The BMS Integrator ensures Battery Management Systems (BMS) communicate effectively with power electronics and control systems , optimizing battery performance and safety. Develop and integrate Battery Management Systems (BMS) for large-scale BESS, ensuring safe operation and communication with PCS/SCADA. • Integrate BMS hardware/software with battery packs. • Develop firmware & algorithms for SOC,SoH,SoP estimation. • Validate BMS functionality through testing. • Validate cell balancing algorithms under dynamic load cycles. • Embedded C/C++ for BMS firmware development. • CANalyzer/Wireshark for protocol analysis. • Knowledge of IEC 62619 (BESS safety standards)

Power Electronics Engineer Renewable Energy Job Description: Develops and maintains power conversion systems for renewable energy applications, including inverters, converters, and battery integration. Key Responsibilities: Design and simulate power electronic circuits Develop control strategies for power conversion systems Integrate battery storage and energy management systems Optimize thermal performance and reliability Collaborate with embedded systems and hardware teams Qualifications: B.E./B. Tech in Electrical/Electronics Engineering M. Tech in Power Electronics (preferred) Skills: MATLAB/Simulink, PSpice Knowledge of inverter/converter topologies Battery management systems (BMS) EMI/EMC considerations

Role & responsibilities The BMS Integrator ensures Battery Management Systems (BMS) communicate effectively with power electronics and control systems , optimizing battery performance and safety. Develop and integrate Battery Management Systems (BMS) for large-scale BESS, ensuring safe operation and communication with PCS/SCADA. • Integrate BMS hardware/software with battery packs. • Develop firmware & algorithms for SOC,SoH,SoP estimation. • Validate BMS functionality through testing. • Validate cell balancing algorithms under dynamic load cycles. • Embedded C/C++ for BMS firmware development. • CANalyzer/Wireshark for protocol analysis. • Knowledge of IEC 62619 (BESS safety standards) Interested and suitable candidates can share their resume to vibin.george@tataautocomp.com

dedicated experience in the design, engineering, or integration of Battery Energy Storage Systems for utility-scale or industrial applications, particularly those integrated with renewable energy power plants. Required Candidate profile understanding of battery technology Lithium-Ion, Power Conversion System focus on the electrical design of BESS System for integration new & existing wind solar & hybrid renewable energy power plant

Roles and Responsibilities Design, develop, test, and validate electrical systems for electric vehicles (EVs) and hybrid-electric vehicles (HEVs). Collaborate with cross-functional teams to ensure compliance with industry standards and regulations. Conduct testing and validation of EV/HEV components, including batteries, motors, charging systems, and thermal management systems. Develop technical documentation and reports on project progress and results. Provide support for new product development projects related to EV/HEV technology. Design and develop electrical systems for EVs, including wiring harnesses, control units, battery management systems (BMS), inverters, and chargers. Create and interpret electrical schematics, harness drawings, and component specifications. Support the integration of high-voltage systems (e.g., battery packs, electric drive units, power distribution modules). Perform simulations and calculations to validate design parameters (current, voltage, thermal limits, etc.). Conduct root-cause analysis and troubleshooting of electrical system failures. Collaborate with cross-functional teams (mechanical, software, thermal, manufacturing) during design, prototyping, and validation stages. Assist in EMC/EMI testing and functional safety assessments. Work with suppliers to evaluate and select electrical components that meet design and compliance requirements. Ensure designs conform to applicable standards such as ISO 26262, ISO 21434, and IATF 16949. Participate in FMEAs, design reviews, and system verification and validation testing. Desired Candidate Profile 6-8 years of experience in automotive or industrial electronics domain with expertise in battery management system (BMS), high voltage DCDC converters, power electronics, vehicle electrical systems. Bachelor's degree in Engineering (B.Tech/B.E.) from a recognized university; knowledge of lithium-ion battery technology preferred. Strong understanding of ev charging infrastructure requirements; familiarity with ISO 26262 functional safety standard an added advantage.

Role & responsibilities Perform testing, validation, and repair of EV battery packs at the service center. Diagnose issues in battery modules and packs, and execute effective repair solutions. Support validation activities and ensure compliance with safety standards. Conduct performance testing, cycle testing, and thermal behavior checks of EV batteries. Work with CAN tools for troubleshooting and diagnostics. Provide technical support and documentation for service activities. Additional Requirement : Hands-on experience in EV battery pack testing, validation, and repair . Strong knowledge of electrical & electronic systems . Proficiency with CAN communication protocols and diagnostic tools . Experience in EV/automotive domain preferred.

As an Embedded Controls Engineering Intern at 10xConstruction.ai, you will have the exciting opportunity to gain hands-on experience in the development of advanced robotics for the construction industry. Working closely with our experienced engineers, you will contribute to the design, testing, and implementation of control systems for our AI-powered robots, with a focus on rapid prototyping, firmware development, and ROS2 integration. Key Responsibilities: - Assist in the design and development of embedded control systems - Support the integration of various robotic components, including sensors and actuators - Contribute to the development of PCBs and firmware for custom hardware solutions - Participate in the testing and debugging of control systems - Assist in the creation of technical documentation - Gain exposure to the process of developing hardware abstraction APIs - Contribute to the prototyping and testing of new control system designs, utilizing off-the-shelf modules and rapid prototyping techniques - Gain experience with ROS2 and assist in the development of ROS2 drivers - Assist in the adaptation of off-the-shelf power tools for robotic applications Qualifications and Skills: - Currently pursuing a Bachelor's or Master's degree in Electrical/Electronics Engineering, Robotics, or a related field - Strong academic record with a demonstrated interest in embedded systems and robotics - Basic proficiency in PCB design software and embedded programming - Understanding of communication protocols such as CAN/RS485/UDP - Motor Control, Battery Management, and Camera Systems Experience is a plus - Familiarity with control theory and robotics - Rapid Prototyping experience in Embedded Systems - Excellent communication and teamwork skills - A strong work ethic and a willingness to learn Why Join Us: - Gain experience in a dynamic startup environment at the forefront of robotics innovation - Contribute to the development of technology that will revolutionize the construction industry - Work alongside a talented and passionate team committed to making a real-world impact - Learn from experienced professionals and gain valuable skills in embedded systems and robotics - Gain practical, hands-on experience in a real-world engineering environment, with a focus on rapid prototyping and firmware development - Contribute to a project with the potential to make a significant impact on the construction industry Requirements: - Robotics - PCB Design - Firmware,

Job Title: Service Engineer UPS, Battery, and Inverter Systems Ready to field work Reports To : Service Coordinator Experience : 0Months to 4 Years Salary: 18,000/- to 25,000/- Mandatory : Bike (preferred Scotty) Gender: Male No of Openings 5 6 days working, Offices time 9:30am to 7:00pm Location: Mugalivakkam Job Overview: We are seeking a skilled and motivated Service Engineer with hands-on experience in the installation, maintenance, troubleshooting, and repair of Battery Backup Systems, UPS (Uninterruptible Power Supply), and Inverter Systems. As a key member of our service team, you will be responsible for ensuring the optimal performance of power backup systems, offering technical support, and providing quality services to our customers. Key Responsibilities: Install, configure, and commission UPS, Inverter, and battery systems at customer locations. Perform system integration, ensuring all components are functioning correctly and safely. Preventive Maintenance: Conduct routine preventive maintenance of UPS, inverters, and batteries to ensure optimal performance and minimize downtime. Inspect and test equipment regularly, replacing faulty parts as needed. Troubleshooting and Repair: Diagnose and resolve technical issues related to UPS, inverter systems, and battery failures. Troubleshoot electrical faults, control panels, charging systems, and related components. Provide quick and effective solutions to restore systems to operational status. Customer Support: Provide on-site and remote technical support to customers, addressing their concerns and providing technical guidance. Educate customers on the proper operation, maintenance, and care of their power backup systems. System Upgrades: Advise customers on upgrades, replacements, and improvements for battery, UPS, and inverter systems. Support the planning and execution of system upgrades or replacements to meet evolving power needs. Emergency Support: Respond promptly to emergency service requests and resolve issues efficiently to minimize system downtime. Required Skills and Qualifications: Education: Bachelor's degree or Diploma in Electrical Engineering, Electronics, or a related field. Experience: Minimum 1 year and above of experience working with UPS, Inverter systems, and battery backup solutions. Hands-on experience in the installation, maintenance, and troubleshooting of power backup systems (preferably in industrial, commercial, or residential environments). Technical Skills:** Strong understanding of electrical and electronic components used in UPS and Inverter systems. Familiarity with battery types, charging systems, and testing equipment. Knowledge of power protection, surge suppression, and load analysis. Proficient in reading and interpreting electrical diagrams and schematics. Soft Skills: Excellent problem-solving and analytical abilities. Strong communication skills to interact with customers and team members. Detail-oriented, with the ability to maintain accurate records and documentation. Ability to work under pressure and in emergency situations. ### **Preferred Qualifications:* * - Certifications related to electrical systems, UPS, or inverter installations (e.g., electrical safety certifications). - Knowledge of industry safety standards and best practices. * *Physical Requirements: - Ability to lift and move equipment up to [weight]. - Willingness to work in varying environmental conditions (e.g., confined spaces, outdoor installations). - Availability for emergency on-call support during nights or weekends, if required. Advise customers on upgrades, replacements, and improvements for battery, UPS, and inverter systems. Support the planning and execution of system upgrades or replacements to meet evolving power needs. Emergency Support: Respond promptly to emergency service requests and resolve issues efficiently to minimize system downtime. Thanks You Santhiya HR * 8 00 8 6 95 894

We at Marquardt India are looking for a highly skilled professional with 4 to 6 years of experience in the automotive embedded domain, who can efficiently handle both Service & Solutions (S&S) and Testing responsibilities. The ideal candidate should have deep expertise in Vector tools and automotive protocols, and should be capable of designing, configuring, and maintaining HIL setups as well as executing end-to-end testing (manual & automated) for products such as Battery Management Systems (BMS), High Voltage Sensors, and other EV domain components. Role & responsibilities:- -Design and build Vector HIL setups including Canoe configuration, wiring harness design, and HIL bench setups -Develop and maintain Canoe configurations and CAPL/Python scripts for simulation and automation - Support VT System configuration and debugging for various ECUs - Read and interpret electronic schematics and wiring diagrams - Collaborate with development teams to understand product test needs and ensure infrastructure readiness - Develop and execute test cases (manual and automated) for embedded automotive products - Perform automated testing using VT HIL systems Good to Have: - Experience with Battery Management Systems (BMS), OTA features, and High Voltage Sensors - Exposure to EV vehicle architectures Interested candidates can write to - sheetal.gaikwad@marquardt.com

We have several openings in our R&D department for following roles. 1. Testing & Validation Engineer 2. HW Design Role 3. Embedded Software Design Engineer 4. EV Integration Engineer Interested candidates can apply. We prefer immediate joiners.

You are a talented and motivated Drone Electronic Engineer with 3-8 years of experience in the Drone field, seeking to join our dynamic team at AITMC Ventures Ltd in Gurgaon/Gurugram. Your role will involve contributing to the development of cutting-edge drone solutions by designing electronic circuits, working on embedded systems, and ensuring compliance with safety standards. As a Drone Electronic Engineer, your key responsibilities will include designing electronic circuits tailored for drone applications with a focus on power management and PCB fabrication. You will be responsible for creating and optimizing PCB layouts for performance and manufacturability. Additionally, you will work on developing and implementing embedded systems for drone functionality, collaborating with software engineers to integrate hardware and software solutions. You will also be involved in conducting rigorous testing of electronic systems in real-time environments, diagnosing and resolving issues to ensure system reliability and performance. Your role will extend to designing and analyzing drone power systems, optimizing power distribution for efficiency and safety, and developing solutions for drone motors, particularly Brushless DC (BLDC) motors. Furthermore, as a Drone Electronic Engineer, you will need to ensure that all electronic designs comply with relevant electrical safety regulations and conduct EMI/EMC testing and validation to meet industry standards. To qualify for this role, you should hold a Bachelors or Masters degree in Electrical Engineering, Electronics, or a related field, with proven experience in circuit design, PCB layout, and embedded systems, preferably in the drone or aerospace industry. Your strong knowledge of power systems, battery management, and electrical load calculations, along with familiarity with BLDC motors and propulsion systems, will be essential for this position. Proficiency in relevant design and simulation software such as Altium, Eagle, and MATLAB is required. Additionally, you should possess strong analytical and problem-solving skills, attention to detail, and excellent communication and teamwork abilities to excel in this role.,

Responsibility. Schedule and manage preventive maintenance. Handle vehicle breakdowns and repairs. Supervise workshop activities and technician performance. Maintain inventory of spare parts and tools. Provident fund Health insurance

Lead design of power electronics circuits including AC-DC, DC-DC & isolated/non-isolated converters (Flyback, Forward, LLC, PFC, Full-Bridge) Contribute to design & development of medical devices, ensuring alignment with regulatory requirements Required Candidate profile Bachelor’s or Master’s degree in Electrical Engineering experience in power electronics design Strong knowledge of power semiconductor devices (MOSFETs, IGBTs, SiC/GaN),gate drivers, and control ICs.

Role & responsibilities Ensure zero battery incidents: No accidents in batteries during import, storage, manufacturing, operations, removal, storage. Prepare SOPs for handling. Prepare key indicators to be monitored for safety. Prepare follow-up actions in case of an incident. Performance Measure: Zero Incidents Roadmap for Battery life cycle management Prepare a roadmap for battery life cycle management. Identify and create key partnerships for battery life (new, used, scrap) EPR/ Regulatory compliance as the battery is classified as a hazardous material. Performance measure: Regulatory compliance and fair value for battery life Validate battery characteristics and analytics. Organize physical testing of batteries/ cells to generate cell/pack characteristics. validate supplier declared characteristics against field data, actual experimentation ensure data capture at battery deployments for usage into analytics validate results from data analytics and Issue actionable instructions/ guidelines based on experimental and data-driven results Performance measure: maximize useful battery life to extract maximum value from each deployment (to be benchmarked with time) Replacement strategy for existing deployment Current batteries are expected to exhaust in next 2 years Thus, prepare a strategy to replace these batteries for continuity of operations. Prepare trade-offs in new generation batteries vs replacement with current types of batteries New suppliers/ product evaluation for replacement keeping in mind compatibility with installed hardware Performance measure: business/operational continuity of existing buses Strategy for new batteries Prepare a tracker on battery technology development globally. Map new technologies that are expected to mature in the next 3-5 years Prepare a road map to adapt these for GCM business Plan for assessment, experimentation, and peer review Performance measure: GCM access to the best battery technologies across the world Preferred candidate profile Self-starter, ability to work independently, handle ambiguous situations, and exercise judgment in a variety of situations. Familiar with the EV Battery process, customer challenges & pain points, internal constraints, and opportunities within the Automotive & EV battery Segment Working with cross-functional teams in marketing, production, and procurement through technical inputs during the NPD cycle Working closely with R&D and procurement teams of large OEMs 5 Actively involved in schematic preparation, BOM, procurement, designing and testing, component selection, hardware prototyping, and debugging Working in-depth with IEC standards in terms of safety, performance, and validation tests on EMI/EMC. Providing basic training on EV systems to various departments within the organization

Responsibilities: * Manage battery production line: optimize efficiency & quality * Collaborate with R&D on new product development * Oversee lithium-ion battery manufacturing processes

You are a talented and motivated Drone Electronic Engineer with 3-8 years of experience in the drone field, seeking to join the dynamic team at AITMC Ventures Ltd. Your role will involve contributing to the development of cutting-edge drone solutions by utilizing your expertise in electronic circuit design, embedded systems, and drone technology. Your responsibilities will include designing and developing electronic circuits tailored for drone applications, focusing on power management and PCB fabrication. You will create and optimize PCB layouts for performance and manufacturability. Additionally, you will work with microcontrollers, sensors, and actuators to develop embedded systems for drone functionality and collaborate with software engineers to integrate hardware and software solutions. You will be responsible for conducting rigorous testing of electronic systems in real-time environments, diagnosing and resolving issues to ensure system reliability and performance. Moreover, you will design and analyze drone power systems, including battery management and electrical load calculations, optimizing power distribution for efficiency and safety. Your role will also involve developing solutions for drone motors, particularly Brushless DC (BLDC) motors, and ensuring compliance with safety standards and industry regulations. To be successful in this role, you should have a Bachelor's or Master's degree in Electrical Engineering, Electronics, or a related field. You must possess proven experience in circuit design, PCB layout, and embedded systems, preferably in the drone or aerospace industry. Strong knowledge of power systems, battery management, and electrical load calculations is essential, along with familiarity with BLDC motors and propulsion systems. Proficiency in relevant design and simulation software such as Altium, Eagle, and MATLAB is required. Your strong analytical and problem-solving skills, attention to detail, excellent communication, and teamwork abilities will be crucial in fulfilling the responsibilities of this position. If you are passionate about drone technology and eager to work on innovative projects, we look forward to welcoming you to our team at AITMC Ventures Ltd in Gurgaon/Gurugram.,

Design battery packs, lights, controllers, and other electronic accessories for electric cycles. Work on embedded systems, firmware, and app integration. Collaborate with hardware and software teams to build innovative and reliable mobility solutions

Role & responsibilities Key Responsibilities Lead the design, development, and testing of embedded communication firmware for UPS, Inverters, Back-up systems, Power Distribution Systems, Battery Management Systems, Auxiliary Products like communication Gateways, and Operator/Service Interfaces applications using C/C++ for 16/32-bit microcontrollers. Develop real-time state machines, monitoring, and communication functions for the afore mentioned product lines. Implement and optimize embedded communication protocols , including industrial field bus protocols (e.g., MODBUS, CAN), network protocols (e.g., USB, TCP/IP, Embedded webservers), and inter-module communication protocols (e.g., I2C, UART, SPI, CAN, DBC). Drive cyber security compliant firmware development , including system-level/sub-system level threat modelling, ensuring firmware adheres to the latest security standards and best practices, secure boot, secure firmware updates, and data protection. Develop and implement Bootloader development and reliable firmware upgrade mechanisms. Perform hands-on code implementation, debugging, development, code review, and testing of embedded communication systems. Participate in subsystem and system-level design verification planning and testing. Understand and comply with Quality Management System (QMS), Project Management Plan (PMP), Agile, and Lean development requirements. Develop test automation scripting for embedded products and utilize various development tools and emulators. Act as a team player within an agile development environment, actively participating in code reviews, design discussions, and knowledge sharing. Collaborate effectively with global teams across different time zones, fostering strong communication and alignment on project goals. Deeply understand product requirements, firmware specifications, and communication firmware architecture to accurately translate requirements into detailed software designs and implementations. Perform comprehensive hardware debugging using advanced real-time firmware debugging tools such as J-Trace, logic analyzers, time/performance profiling techniques, Digital Storage Oscilloscopes ( DSO ), PCANView , and LabVIEW , to diagnose and resolve complex hardware-software interaction issues. Contribute to the full product development lifecycle, from concept and architecture definition to deployment and post-release support. Mentor junior engineers and contribute to the continuous improvement of engineering processes and best practices. Required Skills & Experience 12-15 years of experience in embedded communication firmware development. Proficiency in C/C++ programming for 16/32-bit microcontrollers. Experience with RTOS environments like uC OS-II, QNX, embedded Linux, or other platforms, and POSIX APIs. Experience in Bootloader development and reliable firmware upgrade mechanisms. Extensive experience with various embedded communication protocols , including industrial field bus protocols (e.g., MODBUS, CAN), network protocols (e.g., USB, TCP/IP, embedded webservers), and inter-module communication protocols (e.g., I2C, UART, SPI, CAN, DBC). Demonstrable expertise in cyber security compliant firmware development , including system-level/sub-system level threat modelling, good understanding of TCP/IP based communication stacks, and various encryption techniques. Strong scripting languages like Python and Lua . Familiarity with embedded testing , test automation scripting for embedded products, development tools, and emulators. Exposure to advanced real-time firmware debugging tools like J-Trace, logic analyzers, time/performance profiling techniques, and general hardware debugging . Exposure to static analysis tools like Coverity for code quality and security. Exposure to TouchGFX or similar GUI frameworks for embedded systems. Familiarity with version control systems (Git) and CI/CD pipelines. Experience with formal software development processes (e.g., V-model, Agile Scrum). Prior experience with product lines such as UPS, Inverters, Back-up systems, Power Distribution Systems, Battery Management Systems, Auxiliary Products like communication Gateways, and Operator/Service Interfaces applications is highly desirable. Exceptional ability to understand and interpret complex product requirements, firmware specifications, and communication firmware architecture . Proven ability to be a team player with good interpersonal communication skills. Experience in working with global teams . Additional qualifications Experience with authentication/authorization algorithms/models. Exposure to WIFI/Bluetooth based communication interface development . Exposure to Web technologies like HTML, JavaScript.

Experience in EV battery QA. Familiar with battery manufacturing processes, BMS integration & Quality control. Responsible for assuring performance,durability and reliability of on-board,off-board chargers & DC-DC converters used in EV 2W/3W.