5 Auxiliaries Jobs

Laxmi Organic Industries Limited. We are looking for candidates interested for Technical Associate - Turbine for Dahej. Job Title: Tech Associate Turbine Department: Engineering Location: Dahej Site IV Job Purpose Maintaining normal & safe operation of the Back pressure Turbine and its auxiliaries Role and Responsibilities Strategic: Responsible for operation and maintenance activity of Turbine and its auxiliaries from DCS and as well field. Operational: Responsible for safe operation of turbine and its auxiliaries. He should be well versed with the field activities and as well DCS operation of Turbine and its auxiliaries. Cold, warm and hot start ups of the turbine. Must be well versed with Turbine protection and interlocks. He must maintain both the DCS and field operations of the turbine. Maintain all the operational parameters as per the OEM. Maintain and check the quality of steam and condensate. Maintain and check the quality of the Turbine oil as per OEM standards. Maintain the Housekeeping and equipment cleaning of his area. Coordinate with SI and Maintenance dept in carrying out the Turbine activities. Maintain the log as per the shift requirement. Coordinate with SI and Boiler DCS in safe operation of the Turbine. Should involve in the shutdown activities of the turbine and its auxiliaries. Should be well versed with all the safety, protection and interlocks of turbine. Ensure the Zero leakage of steam, water and oil. Coordinate with other colleagues for shift smooth operation Ensure the maximum safe power generation maintaining all the parameters within the operating range. Should operate the equipments as per the standard SOP only. Do not bypass the protection and interlocks. Should have the knowledge of Turbine heat rate and efficiency. Required Knowledge Awareness of consequences of departures from standard procedures QESH Education & Experience Essential: Diploma in Mechanical Engineering Experience Essential: 6-8 yrs with Turbine field and DCS operation Preferred: Handled Siemens Back pressure turbine of 10 MW capacity Competencies / Skills Essential: Observation Communication skills Listening Teamwork Self-initiative. Job Knowledge Creativity Interpersonal skills Planning/organizing People Management Leadership Motivation Problem solving attitude If you are interested kindly share your resumes on below email id. Email Id: viddhi.kharwa@laxmicom Telephone No: 91-22-4910444-ext.513

Mega Walk-in Drive on 14th June 2025(Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in @ Bangalore on 14th June 2025 (Saturday) PIPING ENGINEER - 10 NOS. EXPERIENCE : 5 to 10 years LOCATION : BANGALORE Interview Venue : QuEST Global Engineering Services Private Limited PRIMROSE 7B, 2nd Floor, Embassy Tech Village, Sarjapura Marathahalli Outer Ring Road, Devarabeesanahalli, Bengaluru 560103, India Job Description : Roles & Responsibilities: Should have hands-on experience in Piping Detailed Design Engineering from the Package or Accessory piping systems of Power Plants. Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal (Project Contracts) Should have extensive review and understanding experience in Schematics (P&ID) and Instruments (e.g. Air systems - Inlet Bleed Heating, Cooling & Sealing Air, Fuel Gas Systems, and Water systems and Oil System and also associated instrumentation). Should have very good experience in Piping, Tubing and all associated fittings, Should have experience in developing new Arrangement drawings & BOM in line with P&ID (Schematics) which inclusive of Valves and all process equipments Should have very good experience in Preparing Modification Kit and FMI (Field Modification Instruction manual) for Field support. Should have experience in Piping Support & structural engineering calculations as project needed. Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of each task. Planning the tasks, executing, and delivering on time, with cost effective and 100% quality. Should have excellent Coordination skills with all Cross-Functional Teams such as (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical with 6 to 10 Years of experience from Thermal /Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Job Description : Roles & Responsibilities: Should have 6+ years of hands-on experience in Piping Detailed Design Engineering from the Package or Accessory piping systems of Power Plants. Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal (Project Contracts) Should have extensive review and understanding experience in Schematics (P&ID) and Instruments (e.g. Air systems - Inlet Bleed Heating, Cooling & Sealing Air, Fuel Gas Systems, and Water systems and Oil System and also associated instrumentation). Should have very good experience in Piping, Tubing and all associated fittings, Should have experience in developing new Arrangement drawings & BOM in line with P&ID (Schematics) which inclusive of Valves and all process equipments Should have very good experience in Preparing Modification Kit and FMI (Field Modification Instruction manual) for Field support. Should have experience in Piping Support & structural engineering calculations as project needed. Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of each task. Planning the tasks, executing, and delivering on time, with cost effective and 100% quality. Should have excellent Coordination skills with all Cross-Functional Teams such as (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical with 6 to 10 Years of experience from Thermal /Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Responsible for Maintenance Planning, scheduling preventive & breakdown Maintenance of Turbine, auxiliaries, Air compressors & dryers. Experience in all phases Maintenance activities like erection commissioning and maintenance etc. Power Plant- Coal