13 Automotive Testing Jobs

Senior Automotive Hardware Design Engineer - Audio (Hardware Engineering Semiconductor/Chip domain) Job Description: Responsible to drive the HW architecture and component selection/decision for the next generation automotive audio system. The main job responsibilities will include but not limited to: Specialized in selecting and recommending next generation semiconductor solution for automotive audio, circuit/PCB designing and developing the electronic components and systems that power car audio systems, ensuring high-quality sound and seamless integration with vehicle technology. This role involves working closely with vehicle Architecture/system Design, safety engineer & Buyer/purchasing ensuring that the chosen components meet the performance, reliability, and cost requirements of the applications. Technical expertise in recommending and proposing the right electronic audio components not limited to Audio amplifiers, Microphone interface/Audio ADC, Audio DSP, Audio power circuitry/PMIC, Speaker interface, Digital audio interfaces (A2B, Ethernet, etc), working knowledge on ANC (Active noise cancellation) and RNC (Road noise cancellation) design. Familiarity with relevant automotive safety and quality standards, such as ISO 26262 and AEC-Q100. Experience with acoustic measurement instruments, Familiar with audio data acquisition, analysis systems and Audio Precision. Work proactively with silicon vendor partners to drive design features and technology road map. Support HW Engineering group during advanced design phases, system architecture definitions and ECU development / Qualifications. Ability to collaborate and work with global team spread across different regions and time zones. Basic Qualifications B.E/B.Tech or M.E/M.Tech in Electrical/Electronics, Telecommunication, or equivalent Engineering Minimum 8+ years of experience in automotive embedded electronics designs or hardware/system architectural role. Knowledge of In-vehicle infotainment system, Audio system, Automotive vehicle connectivity systems and ECU design, development, and testing. Experience in Automotive ECU design, Audio standards, automotive testing and certification. Strong teamwork spirit, excellent oral and written communication skills. Preferred Qualifications Experience in automotive area (OEM, TIER1, TIER2) Experience in In-vehicle infotainment system, Audio system, Automotive vehicle connectivity systems and ECU design. Understanding and knowledge of Board software/Bring up software, Audio DSP and MCUs. Knowledge of safety standards including ISO 26262, Euro NAP, and Security regulations would be a plus.

Mandatory skills Testing: Embedded AND Automotive AND Python AND (C Programming / CPP OR C++ OR C Plus Plus) AND Linux Bangalore (Initial 6 months need to work in Hyderabad post you need to travel back Bangalore.)

•Create new test cases based on the platform requirements. •Review and adapt existing test cases. •Execute test activities for test- and live releases on test infrastructure and vehicles including. corresponding documentation and proof of execution. •Support the other stakeholders in relation to testing, e.g. pre-performance test etc. •Document and communicate test activities incl. results and identified errors. •Execute of test data management and maintenance of test data. •Conduct defect management using the tools of the VW Group. •Conduct continuous tracking and documentation of defects identified during Platform Test or other test activities, e.g. pre-performance test etc. •Reviews of the test results and delivering the results to the stakeholders of the project. •Share knowledge for test automation and support its implementation. Automotive Experience is must

Device Testing Engrs(Black/White Box)5–10 yrs exp in Embeded C/C++, testing, Manual Testing. Domain:Medical/Automotive/Aerospace. Loc: Chennai, 5-day WFO. 12M contract (convertible 2 permanent), HCL (Payroll: TE Infotech). ssankala@toppersedge.com

Device Testing Engrs (Black/White Box) – 5–10 yrs exp in Embedded C/C++, testing, SW verification. Domain: Medical/Auto/Aero. Loc: Chennai, 5-day WFO. 12M contract (convertible to permanent), HCL (Payroll: TE Infotech). ssankala@toppersedge.com

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Test Engineer, you will play a critical role in ensuring the quality and functionality of our automotive software products, particularly those developed using the Simulink platform. Roles and Responsibilities:1.Develop/Test enhancements, bug fixes and new features for software applications. 2.Develop automated test procedures that can be run on the HIL and/or vehicle. 3.Execute verification and validation testing on time and with quality to meet program milestones. 4.Provide validation status to leadership and the appropriate project management. 5.Collaborate with algorithm design development engineers to improve algorithms. 6.Create validation and verification tests to ensure designs are of high quality. 7.Develop and document requirements required to design an automotive system. 8.Collaborate with other Test Engineers and share best.9.Integrate automated test suites in continuous integration (CI)/continuous development (CD) pipelines. Professional & Technical Skills: 1.5+ years experience required in automotive testing required. 2.Experience with HiL benches (e.g. dSPACE) and MathWorks tools like MATLAB, Simulink and Stateflow.3.Experience translating feature requirements into a test design and working automated test suites. 4.Working experience with automotive development process:A-Spice / ISO26262 / Scrum. Additional Information:1.Excellent communication and collaboration skills, with the ability to convey complex security concepts to non-technical stakeholders.2.This position is based at our Bengaluru office3.A 15 years full time education is required (Bachelor of Engineering in Electronics, or any related stream). Qualification 15 years full time education

Desired Experience: A minimum of 4+ years Preferred: Immediate Joiners /Serving notice period of not more than 45 days Employment Type: Full-Time, Permanent Role Category: Software Testing Who we are looking for: A quality assurance engineer, who can help us take quality and reliability to the next level at Pippin. By joining our team, you will assist in developing Pippins proprietary software platform. You will get the opportunity to work on cutting edge technologies and take ownership of client-facing software applications. Responsibilities Develop detailed, comprehensive, and well-structured test plans and test cases Prioritize and plan testing activities Play the role of test engineer: Design, develop, and execute automated tests Identify and report the issues as well as rectify them. Perform regression testing. Ensure the quality, responsiveness, and performance of Pippins web applications Collaborate with software developers. Must-Have Skills Selenium, JavaScript framework-based automated test writing Testing principles & methodologies. Automation tools & techniques Web Application Testing Android Application Testing Load Testing using Artillery Configuration management concepts & procedures Power shell and/or bash scripting API testing experience. SQL query experience. Having a protractor's end-to-end experience is an added advantage. Experience with version control, open-source practices, and code review Need to Have Excellent communication skills (written and spoken in English) Bachelor's degree in Computer Science or a related field or the equivalent demonstrated experience

Preferred candidate profile : Candidate must have Experience with Either Security testing / Automotive testing , Candidate must have good experience with Python Candidate must have Experience C/ C++ , Embedded C NOTE * - The initial 6 months you will be working in Hyderabad location and the project will be carry forwarded back to Bangalore , Please enroll yourself , if you are Okay with this . The above mentioned skills are must.

Hi, We are hiring for EMI/EMC Test Engineer for Mysore/Mysuru location. Job title: EMC Testing Engineer Work Location: Mysore/Mysuru Division/Department: EMC lab Profile: The EMC Test Engineer is responsible for evaluating, explaining, and completing the test report for intricate customer samples. Follows defined test plans, testing procedures and data sheets for the product under test. Operates and maintains complex test equipment and customer samples. Communicates with customers during setup and operation to ensure proper evaluation. Skills required: strong background in EMC/EMI testing. Knowledge of basic EMC standard like Knowledge of EMC standard like IEC 61000-4 series, IEC 61326, MIL standard, IEC62052-11 series and CISPR series. Knowledge of Emission and Immunity test like Radiated and Conducted emission, ESD, EFT, Surge, Conducted and Radiated Susceptibility test. Exposer of testing in 3M Anechoic chamber. Experience: Minimum 4 years Educational Qualification Required: B.tech/Diploma (E&C/E&E) or M.tech (E&C/E&E). Interested candidates please share your updated resume to nikita.singh@nemko.com or apply here on naukri.com

Role & responsibilities Tasks: For our test automation project, we are looking for experienced experts with the following focus areas: Development of the Central Control Framework and Vector simulations Integration of the framework and simulation Test automation using CAPL and vCDL Software development for simulations for DSTW, iLBS, ETCS, and MDM in Vector CANoe Programming with CAPL and vTestStudio for interfaces such as SCI, SMI, and SDI Software development through the implementation of test cases using the Vector CAPL and vCDL programming languages Improvement of the Vector CANoe-based development platform Software development and further development of a CANoe-based Desector tool for monitoring and analyzing protocols (SCI, SMI, and SDI communication) Analysis of network communication using the CANoe and Wireshark tools Implementation of the communication matrix for IT security, crypto components, and firewalls from Fortinet and OHB Execution of automated test cases in the CANoe lab environment using network and security systems Integration of CANoe-based automation into the central control framework using Python Preferred candidate profile Requirements: Technical Expertise/Know-how: Experience in developing Vector CANoe software and hardware tools (required) Experience in CANoe CAPL programming (required) Experience with vTestStudio and vCDL (required) Knowledge of firewalls (e.g., B. Fortinet, Genoa) Experience in IP-based vector simulation development (required) Experience in test automation with the CANoe tool (required) Knowledge of network technologies and advanced network protocols Programming skills in Python and C# Experience with AMQP, EtherCAT, and MQTT (required) Knowledge of RaSTA protocols, BTP, DSTW, iLST, and ETCS, as well as experience with RaSTA binding in CANoe (required) Perks and benefits Education/Social Skills: Completed degree in computer science, communications engineering, or a comparable field from a recognized university in Germany Initiative, ability to work in a team, curiosity, and efficient work At least 35 years of verifiable professional experience Willingness to travel required

Good Day !!! We are pleased to inform you about a job opportunity for the position of System Validation Position at VBS . After reviewing your profile, we believe you may be a great fit for this role. Please find attached the Job Description (JD) document for your review. It outlines the responsibilities, qualifications, and skills required for the position. Additionally, you can explore more about our company and its values by visiting our website at www.Vsolutionsglobal.com Should you have any questions or need further information, feel free to reach out. We look forward to hearing from you and potentially working together. Thank you for your time and consideration. Title : System Validation Location: Hyderabad/Pune Experience: 10 to 15 years System Validation Job Description: Is responsible for the development of System/Sub system test specification and execution of System/Subsystem tests according to the test specifications (including test result documentation, test incidence reporting) Is responsible to play a crucial part in ensuring the system's integration and qualification tests conform to the ASPICE framework, particularly focusing on SYS.4 (System Integration Test) and SYS.5 (System Qualification Test) on System Level, this includes the System Parametric Tests, Performance Tests (against requirements), the System Robustness Tests, the System Durability Tests, and EOL Tests Execution of tests on target systems like HIL and SW test benches based on Labview environment. Working in a multinational and multi-disciplined environment for Engine Control Units in the Automotive domain. Initialization of the system test concept Planning, coordination and monitoring of all system test activities according to the system test strategy Participation of project meetings with clear status communication Skills needed: Experience in test design and test automation for System testing Languages : Python scripting Tools : CANOe, Cameo ( or similar architecture development tool), Management / Tools : SDLC, IMS Communication protocols : CAN/LIN Diagnostics : UDS Functional safety software, and Communication monitoring, Processor Monitoring and Diagnostics overview Experience in requirement analysis and management process Experienced in automotive systems, sub-system and electronics architecture Knowledge of on Vehicle & Hardware-In-Loop testing is desirable Familiarity with Requirement management tools like Cradle is preferable Experience of using oscilloscope, multimeter. Excellent communication skills (oral and written) Required details for further process Total Experience : Rev Experience : CCTC ECTC NP Available to Join : Current Location Preferred Location :

Position - Quality Practitioner Experience - 8+ Years Location - Hyderabad Notice Period - Immediate to 30 days A Quality Practitioner in IT software is a professional responsible for ensuring the quality of software products throughout their development lifecycle. Their primary focus is to make sure that the software meets specified requirements, is free of defects, and provides a good user experience. Key Responsibilities: Quality Assurance (QA): Developing and implementing processes and standards to maintain quality throughout the development cycle. Quality Control (QC): Inspecting and testing software products to ensure they meet the required standards. Testing: Conducting different types of tests, including unit, integration, system, and user acceptance testing. Process Improvement: Continuously improving processes based on feedback and performance metrics. Collaboration: Working with developers, product managers, and other stakeholders to ensure quality is built into the product from the start. Common Roles and Titles: Quality Analyst Focuses on identifying issues and suggesting improvements. QA Engineer Designs and executes test cases, both manual and automated. Test Engineer Specializes in testing software for functionality, performance, and security. QA Manager Leads a team of QA professionals and oversees quality strategies and processes. Software Quality Consultant – Provides expert advice on quality practices and process improvements. Skills Required: Strong understanding of software development and testing methodologies. Proficiency in test automation tools (e.g., Selenium, JUnit, TestNG). Knowledge of QA tools like JIRA, TestRail, or Quality Center. Analytical and problem-solving skills. Good communication and collaboration abilities.

Proficiency in Embedded C programming language Knowledge of EMC Standards, EMC testing and test report documentation Hands on experience using Laboratory instruments such as oscilloscope, multimeter...etc Experience in working in laboratory following ISO 17025/ISO 9000 quality management system Experience in Automotive testing Experience in handling RF instruments i.e. RF amplifiers, EMI receivers..etc EMC Testing - EMC Design/ Simulation /SI-PI analysis, Responsible for EMC testing, compliance, certification. EMC consultancy Electrical testing - PAV,VERDI, EOL, FIT, Verification Validation (Thermal ,RE). Requirements. Should be able to understand datasheets of Electronic Components from different suppliers. Schematics and eBOM preparation using tools like Orcad, Pspice,LTspice Good know how on tools like MATLAB and Simulink Experience in Lab Verification and Measurements using test equipments like Oscilloscopes, Power Supplies, Electronic Loads, Data logger, CANAlyzer, DSO etc. Ability to troubleshoot and analyze the hardware issues in the, ECU/Test boards Experience in soldering Soldering, de-soldering SMDs, ASICS, uCsactivity in board level Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Job Description - Grade Specific Proficiency in Embedded C programming language Knowledge of EMC Standards, EMC testing and test report documentation Hands on experience using Laboratory instruments such as oscilloscope, multimeter...etc Experience in working in laboratory following ISO 17025/ISO 9000 quality management system Experience in Automotive testing Experience in handling RF instruments i.e. RF amplifiers, EMI receivers..etc EMC Testing - EMC Design/ Simulation /SI-PI analysis, Responsible for EMC testing, compliance, certification. EMC consultancy Electrical testing - PAV,VERDI, EOL, FIT, Verification Validation (Thermal ,RE). Good Know how of Basic Electronics. Should be able to design and understand simple Electronic circuits based on Requirements. Should be able to understand datasheets of Electronic Components from different suppliers. Schematics and eBOM preparation using tools like Orcad, Pspice,LTspice Good know how on tools like MATLAB and Simulink Experience in Lab Verification and Measurements using test equipments like Oscilloscopes, Power Supplies, Electronic Loads, Data logger, CANAlyzer, DSO etc. Ability to troubleshoot and analyze the hardware issues in the, ECU/Test boards Experience in soldering Soldering, de-soldering SMDs, ASICS, uCsactivity in board level Skills (competencies) Verbal Communication