62 Auto Cad Jobs - Page 2

Job Title : Executive / Sr. Engineer Manufacturing Engineering Department : Manufacturing Engineering Location : Chakan, Pune Industry : Automotive / Engineering / Manufacturing Roles & Responsibilities: For Executive (Experience: 5–7 Years): In-depth knowledge of manufacturing processes Troubleshooting of production issues and support to continuous improvement initiatives Conduct machining feasibility studies and develop process flow, work instructions Identify and define facility and equipment requirements Validate new processes through trials, prototype builds, and PPAP Drive root cause analysis, implement corrective actions and quality improvement initiatives Identify and execute cost-saving opportunities Conduct trials for new machines, fixtures, and tooling Perform CNC programming, prove-out, cycle time optimization, and micro-programming Ensure SOP readiness and support in run@rate activities Prepare and maintain technical documentation: DR, SIR, PFD, FMEA, CP, SOP Hands-on experience with VMC / HMC machines For Sr. Engineer (Experience: 2–5 Years): Study and interpret engineering drawings Conduct machining feasibility and facility requirement assessment Participate in trials of new machines, fixtures, and tooling Execute CNC programming and cycle time reduction activities Handle machining and inspection of sample, pre-pilot, and pilot lots Contribute to corrective and preventive actions for process issues Study new drawings, ECN, and PCN for feasibility and implementation Prepare and manage documentation: DR, SIR, PFD, FMEA, CP, SOP Hands-on experience on VMC / HMC machines Software Skills : Executive : AutoCAD, Mastercam, Auto Ballooning Sr. Engineer : AutoCAD Qualifications : Diploma / B.E. in Mechanical / Production / Manufacturing Engineering Desired Candidate Profile : Strong analytical and problem-solving skills Good understanding of machining and manufacturing practices Team player with good communication skills Self-driven with an ability to handle shop-floor challenges independently Share Your Resume on- trainee_suyash@endurance.co.in sajanjal@endurance.co.in

Responsibilities: Responsibilities of this role include, but are not limited to: Ensuring the production of project documents that are accurate, clear and concise and compliant with best practice and any other standards dictated by the nature of the project. Assisting in the resolution of complex technical drafting issues. Working to make sure that the drafting component of the project comes within budget and deadline. Mentoring other members of the drafting team in their development Developing and maintaining professional relationships with project Managers Being familiar with, and compliant with, relevant Health and Safety regulations Document management including drawing register Providing technical advice to project team members Assisting in developing team members to their full potential Being familiar with, and compliant with, relevant H & S regulations and promoting a culture of awareness within the team Performing other duties and responsibilities as required from time to time by your manager. Qualifications, skills & experience: DEE / B.E in Electronics and Instrumentation / Instrumentation and controls / Electrical Engineering from a recognized University. 5 to 8 years Drafting experience in design of water and waste water treatment plants. Knowledge of Plant 3D, Auto CAD, Revit and other industry software viz. Drafting knowledge in P&ID, Instrument symbol library, Instrument installation drawings Preparation of instrumentation reports (Instrument list, Instrument index, cable schedule, datasheet). Drafting of control schematic and panel layout drawing. Previous experience in instrumentation design of water and waste water treatment plants is a plus. Familiar with international codes, standards and practices related to USA, UK, Middle East. Experience within a consultancy environment specifically in the utilities sector. Strong verbal and written communication skills in the English language, with good report writing, analytical and computer skills. Working in collaboration with other design disciplines to ensure the integrity of the overall design. Adhere to BIM Execution Plan and BIM projectworkflowcriteria. Follow BIM content standards and development procedures. Excellence striving for technical excellence. Key Qualifications:- Trust building and retaining relationships of trust with our clients and colleagues. Teamwork working together as a team for the Group, not just the individual Responsibility taking responsibility for our performance and our safety

Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Electrical services with the building layouts and other services. Ensure that the drawings should comply all the requirements pertaining to the presentation, neatness and aesthetic view. Ensure that the drawings are prepared within the productivity norms. Key Responsibilities Ensure the accuracy and technical correctness of the design and coordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Electrical drawings with the civil and architectural layouts. Co-ordinate the Electrical services with the Airconditioning, plumbing and fire fighting services, including preparation of multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the Electrical drawings. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Medium, Low and Extra Low Electrical services for major commercial and light industrial buildings in the GCC. The services would include the following systems: MV power including switchgear, transformer and cabling. LV power including panels, distribution boards, cable containment, cables, Wiring and supply accessories. Lighting and emergency lighting including light fittings, controls and central battery system. Fire Alarm Security system including CCTV and access control. Voice and Data Standby Power Generation Uninterrupted power supply Building Management System (BMS) Solar Power System Earthing and Lightning protection Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting packages spreadsheets and databases. Detailed design ability to undertake load distribution, cable and protection device selection and sizing calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defense requirements. Ability to read, understand, visualize and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Electrical engineering / ITI Full time Course along with: Approved training in Electrical Trade Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of Electrical construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries. Minimum 2 years of experience in Revit and 3D modeling. Site experience in installation / execution would be an advantage. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents.Knowledge of BIM softwares such as Navisworks is must. Undertakes the detailed design and preparation of working drawings for the Electrical works for major commercial and light industrial buildings.

Highly Motivated Junior Architect with 6 months of experience in AutoCAD, Lumion, and Revit for 2D plans & 3D walkthroughs. Strong communication skills, project collaboration & rendering expertise.Eager to grow in a creative, fast-paced environment

Exp 0-1 yrs B.Arch. /Diploma in Architecture / B Arch Internship

Inter Designing pressure vessels, Reactors, RVPD, HSM heat exchangers, as per various international codes & regulations specified by customers like ASME & TEMA Preparation of BOM with code Preparing Plat layout Giving requisition to purchase Required Candidate profile Coordinating with sales team , colleagues & HOD Attending Technical Mom with Client at Site and at Office premises Good Knowledge and experience of Auto CAD and PV Lite

Design the products, parts, sub-assemblies using Solid works & Auto CAD. Submission of drawings as per customer requirements in short time. BOM preparation & maintenance of documents for every order. Technically analyze and resolve queries related to Parts, Assemblies, Drawings, etc. . Leading the product testing activities for both third party & internal certifications Leading special projects Product designing. Lead the design review, detailed drawing review and BOM review meetings. Generate new part numbers of purchase parts numbers, reference drawing numbers and Assembly numbers

Roles and Responsibilities Design and develop new products using AutoCAD, Creo, and other relevant software tools. Collaborate with cross-functional teams to ensure successful product development projects. Conduct market research to identify trends and opportunities for innovation in the automotive industry. Develop gasket designs for various applications within the auto components sector. Participate in new product development (NPD) processes to bring ideas from concept to production. Desired Candidate Profile Fresh graduate or Diploma holder with 0-1 year of experience in mechanical engineering or related field. B.Tech/B.E. degree in Automobile or Mechanical Engineering required. Proficiency in GD&T, NPD, PDM, SOPs, SolidWorks, Solidity, Windchill preferred but not mandatory.

Key Responsibilities - Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Electrical drawings with the civil and architectural layouts. Co-ordinate the Electrical services with the Airconditioning, plumbing and fire fighting services, including preparation of multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the Electrical drawings. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Medium, Low and Extra Low Electrical services for major commercial and light industrial buildings in the GCC. The services would include the following systems: MV power including switchgear, transformer and cabling. LV power including panels, distribution boards, cable containment, cables, Wiring and supply accessories. Lighting and emergency lighting including light fittings, controls and central battery system. Fire Alarm Security system including CCTV and access control. Voice and Data Standby Power Generation Uninterrupted power supply Building Management System (BMS) Solar Power System Earthing and Lightning protection Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting packages spreadsheets and databases. Detailed design ability to undertake load distribution, cable and protection device selection and sizing calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defense requirements. Ability to read, understand, visualize and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Electrical engineering / ITI Full time Course along with: Approved training in Electrical Trade Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of Electrical construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries. Minimum 2 years of experience in Revit and 3D modeling. Site experience in installation / execution would be an advantage

Design the products, parts, sub-assemblies using Solid works & Auto CAD. Submission of drawings as per customer requirements in short time. BOM preparation & maintenance of documents for every order. Technically analyze and resolve queries related to Parts, Assemblies, Drawings, etc. . Leading the product testing activities for both third party & internal certifications Leading special projects Product designing. Lead the design review, detailed drawing review and BOM review meetings. Design of Aircondition

Proficiency in 2D and 3D legacy products/parts/assemblies on NX CAD software. Able to study and define design characteristics, GD&T, Tolerance stacking, for consideration and evaluation by supervisor.

Design, develop & document components 2D/ 3D drawings Create, analyze, & test product designs Conversant & apply DFM/ DFMA Optimize the application of GD&T Manage team of highly fast paced 20+ Design Engineers with sense of ownership & responsibility Required Candidate profile BTech Mech., 15+ Yrs exp in Design & Development in Medical Devices/ Aerospace. Sound knowledge of Product design, 2D and 3D drawings, DFM, DFMA, Design Verification and Design Validation (ISO 13485).

1. JOB PURPOSE:- Responsible for all Design related activities for ongoing and upcoming projects. Manage time, cost and scope without any deviation. Track monitor and control project related deliverables, for meeting companys strategic operational objectives. 2. ORGANISATIONAL CHART:- Will report to GM- Electrical Design and Engineering 3. Primary Duties and Responsibilities:- Work with Project consultant Engineering team, for designing of Plant Electrical Equipments, Substations, MRS Etc. Finalizing Project specification for Electrical Equipment, Switch Gears, Cables, as per latest design standards. Monitoring Tracking of Engineering Deliverables for the project. Understanding and following Project design best practices Project design consultancy on the basis of Basic Engineering Package. Monitoring the status of the project engineering (designing) and communicate the relevant information to stakeholders. Preparation Review of MTO (Material Take of) List BOQ (Bill of Quantity) for the project, to facilitate Procurement activities Preparation Review of Equipment Manufacturing Drawings, GA Drawings Responsible for assigned project from the initial development. This will require meetings with users to fully determine their needs fulfilling the same. Conducts project review meetings identify the issues that come up and plan countermeasures. Supporting selection of Design consultant Supporting construction team for On-field engineering issues managing DCN (Design Change Notes) for the project Preparation Review of As-Built drawings for the Project. 4. SKILLS AND KNOWLEDGE:- Educational Qualifications B. Tech (Electrical) Functional and Behavioral Skills Working knowledge of Project. Ability to communicate across different functions. Ability to understand Project design requirements Design standards / specifications Ability to prepare study design documents on software like AutoCAD Meticulous in documentation. Ready to travel within India Abroad. Ability to coordinate activities in time line horizon. Relevant and total years of Experience:- Minimum 2 to 6 years of total experience in the field of Chemical / Petrochemical / Refinery Project designing, vendor development for Project consultancy/ design. Should have experience of project activities from grassroots level. Skills and academic qualifications Educational Qualifications Minimum Qualification - B.Tech (Electrical) Preferred Qualification - M. Tech (Electrical) Functional Skills Functional Skills Required - Project Management , Project Execution Coordination, Electrical Design Technical Skills required - Auto CAD Relevant and total experience Total Number of experience required - 5 Relevant experience required in - 3

- Quality/Quantity check/Inspection of incoming raw material as per customer drawings, specifications - Quality check/Inspection of semi finished material i.e. work in process i.e monitor the production phase at various levels - Quality check/Inspection of final finished product - Prepare Inspection Report, Filing and Record Keeping - Guide the Production team about quality issue to enhance the quality of the PRODUCT Exp : 2- 3 Years in QC Department Qualification DME/ITI/NCTVT(Mechanical) Additional Qualification : Knowledge of reading Auto cad Drawings and Basic Computers Location of posting : Dadra (Dadra & Nagar Haveli), Near Vapi, Gujarat Candidates Location : Preferably in and around Dadra (Dadra & Nagar Haveli), Near Vapi, Gujarat

We are looking for quantity surveyor for Cost Estimation and Budgeting , client Billing ,Subcontractor billing, Auto cad, Surveying , Road works Reconciliation , Estimation Costing Maintaining accurate records and documentation , Preparing BOQ

Experience in, Billing, Client billing, Subcontractor billing, Auto cad, Surveying Road works Reconciliation Road estimator Quantity surveyors Estimation Costing.

Key Responsibility Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the air conditioning drawings. Maintain the daily record of the work done including time sheet. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills- Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: Water and air-cooled chiller plant. Constant volume air handling plant. Variable air volume air handling systems Fan coil systems Package and split systems Supply and extract ventilation. Smoke control systems. Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting / 3D modeling packages, spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Ability to read, understand, visualise and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Mechanical engineering / ITI Full time Course along with: Approved training in Air Conditioning Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience 8 to 10 years engineering experience with at least 5 years in the preparation of air-conditioning construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries would be an advantage. Minimum 2 years of experience in Revit and 3D modelling Site experience in installation / execution would be an advantage.

Focused on designing faade details Items. - Creator is responsible for producing detailed technical drawings and specifications of faade systems including curtain walls, cladding and glazing. - The role involves collaborating with architects, engineers and project manager to ensure accurate and efficient design and quantity estimation for faade projects. - The position requires strong technical skills, attention of detail and knowledge of materials and construction methods related to faades.

We are seeking a talented and motivated Metal Building Engineer who can focus on producing precise, accurate, and comprehensive shop drawings and related documents to ensure the proper fabrication and erection of building components. Experience: Fresher or 1 year of experience Technical Skills: Hands-on experience with AutoCAD Strong technical knowledge about the PEB (Pre-Engineering Building) Roles & Responsibilities: Create detailed shop drawings for the fabrication and erection of PEB components using relevant applications. Prepare precise fabrication drawings for primary members (e.g., columns, rafters) and secondary members (e.g., purlins, girts, bracings). Generate assembly drawings, connection details, and erection plans for on-site construction. Ensure all detailing adheres to design engineer specifications and complies with relevant building codes. Identify and resolve clashes or discrepancies between structural, architectural, and MEP (Mechanical, Electrical, and Plumbing) drawings. Follow detailing standards (e.g., AISC, MBMA, IS codes) to maintain accuracy and consistency. Produce a Bill of Materials (BOM) for procurement, including quantities of materials, bolts, and fasteners. Utilize detailing software such as AutoCAD and other steel detailing tools for modelling and generating drawings.

We need injection Moulding Designer.Responsibilities: Product Design Analysis: Analyze product designs and determine feasibility for injection molding production. Identify potential design issues that could affect moldability and manufacturability. Suggest design modifications to optimize the molding process and product quality. Mold Design and Development: Design injection molds using computer-aided design (CAD) software, ensuring dimensional accuracy and adherence to engineering standards. Develop a comprehensive mold design that includes mold components (gates, runners, cores, cavities, etc.) and considers factors like material flow, cooling systems, ejection mechanisms, and parting lines. Perform mold flow analysis to optimize runner design, gate placement, and wall thickness for balanced filling and minimal shrinkage or warping. Collaboration and Communication: Collaborate closely with product designers, engineers, and manufacturing personnel to ensure the mold design meets all functional and production requirements. Effectively communicate complex technical concepts through drawings, reports, and presentations. Mold Design Documentation: Prepare detailed mold design documentation, including 2D drawings, 3D models, and assembly instructions. Develop and maintain a bill of materials (BOM) for all mold components. Additional responsibilities may include: Participating in mold prototyping and testing processes. Troubleshooting mold design issues and implementing corrective actions. Staying up-to-date with the latest advancements in injection molding technologies and materials.

Procurement of Pharmaceutical Process Machinery, spares, Utility Machinery, HVAC, Clean Room items, Lab equipment and Usables. Project co-ordination and implementation. Cost Benefit Analysis. Plant design in Auto CAD, BOQ preparation. Vendor Management & Supply Chain co-ordination.

Primary skills required are - Good knowledge of AutoCAD, SketchUp , Photoshop, V ray , Lumion (add ons) with the ability to develop construction/ working drawings, can interact with client/internal team. Candidates must be capable of handling interior and architecture sites and coordination with consultants. Candidate should be willing to learn and to take up responsibilities actively. Experience/ interest in Commercial / Restaurants / F &B projects Preferred. Education - Bachelors in Interior Design

Role & responsibilities : cad drafting , managing project ... Preferred candidate profile : good with Auto CAD , able to speak & communicate

Lead the DESIGN & DEVELOPMENT of Upto 66KV TRANSFORMERS handling 3D MODELLING, ENGINEERING DRAWINGS, DESIGN DRAFTING, EXECUTION of RATINGS upto 30 MVA, Voltage class upto 66kV for distribution etc Strong skills in AUTODESK INVENTOR & SOLIDWORKS must Required Candidate profile DIP/BE 7+yrs exp into MECAHNICAL PRODUCT DESIGN & DEVELOPMENT Exp in designing TRANSFORMERS, MECHANICAL PRODUCTS, SWITCHGEARS etc preferred Strong skills in AUTODESK INVENTOR & SOLIDWORKS must Perks and benefits Excellent Perks. Call Mr. Prabhu @ 70108 63499 now

Lead the DESIGN & DEVELOPMENT of Upto 66KV TRANSFORMERS handling 3D MODELLING, ENGINEERING DRAWINGS, DESIGN DRAFTING, EXECUTION of RATINGS upto 30 MVA, Voltage class upto 66kV for distribution etc Strong skills in AUTODESK INVENTOR & SOLIDWORKS must Required Candidate profile DIP/BE 3+yrs exp into MECAHNICAL PRODUCT DESIGN & DEVELOPMENT Exp in designing TRANSFORMERS, MECHANICAL PRODUCTS, SWITCHGEARS etc preferred Strong skills in AUTODESK INVENTOR & SOLIDWORKS must Perks and benefits Excellent Perks. Call Mr. Prabhu @ 70108 63499 now