227 Assembling Jobs - Page 7

Able to apply a logical, methodical, and analytical approach to isolate and solve technical problems; and Able to communicate and to work with other technicians, departments, and customers in technical support situations. Demonstrates and applies greater knowledge of the company’s product. Able to exercise limited discretion in deviating from standard practice to solve problems within the area of experience. Researches problems and recommends solutions. Assists in the provision of on-job-training. Professionally process and resolve asset request cases that support proper accounting for site inventory Maintain site inventory with zero discrepancy through adherence of asset management procedures Inbound and outbound fulfillment that enables achievement of business deliverables Ensure that any asset defects, damages, discrepancies or deviations are escalated to management for timely support and resolution Able to work in shift rotations that may include day, evening, overnight and/or during weekends, holiday Able to work in various IBM Cloud locations in Chennai Required education Bachelor's Degree Required technical and professional expertise 2+ Years of experience. We require physical server hardware experience (Assembling of Servers like Motherboards, RAM, Hard disk, Raid Controllers, network cards etc). OS exp is a plus, emphasis on physical server hardware exposure Responsible for scheduling and performing hardware maintenances for IBM Cloud customers that involve upgrades, downgrades, support requests, etc. Physical hardware upgrades/downgrades referring to Server Hardware like RAM, Hard drives, Processors, Network cards etc.. Troubleshoot and resolve problems with basic physical network cable/device connections at server/switch/stack for network devices in the Data center physically. Person must worked in the physical Data center with 100% onsite experience. (NO REMOTE SUPPORT) 24/7 Operations with 100% onsite support (No Remote or On call support). No specific shifts, Rotating shift schedule Responsible for responding to UIP related events around physical infrastructure. Coordinating with internal departments to resolve outage events around faulty links, optics, or failed Networking devices. Physical Infra servers knowledge along with basic understanding of network devices (Like network phyiscal cabling and Optics and inter Connectivities etc) to extend onsite support for the remote Network teams and Network ISPs personel. Outage events are performed under the supervision and guidance of Site Management. Preferred technical and professional experience May be directed to perform other duties consistent with training and skill levels required for this position. Understand site capacity utilization and provide assistance with Management on capacity planning.

Roles and responsibilities: Assembling and dismantling vacuum pumps Assembling and dismantling pumps Assembling and dismantling vacuum pumps over oiling Attending pump leakage issue. Replace damaged oil seals. Replace vacuum pump oil and replace bearing. Leakage arrest leakage from oil seal Right time resolve the breakdown calls Attended break down status need to update your superior Down level team needs train up. Critical pumps status report submits to your superior HSE polices should be followed. LOTO process to be followed.

Roles and responsibilities: Assembling and dismantling vacuum pumps Assembling and dismantling pumps Assembling and dismantling vacuum pumps over oiling Attending pump leakage issue. Replace damaged oil seals. Replace vacuum pump oil and replace bearing. Leakage arrest leakage from oil seal Right time resolve the breakdown calls Attended break down status need to update your superior Down level team needs train up. Critical pumps status report submits to your superior HSE polices should be followed. LOTO process to be followed.

Walk in Interview for the freshers Female Diploma,10, Puc. Degree Candidates can Apply Benefits: ESI & PF, Canteen Facility Free Transportation across the Bangalore. Required Candidate profile Female Candidates any Qualification can Apply. Age 18 Years and Above. Perks and benefits As per the Co Norms

FREE JOB HYUNDAI TRANSYS INDIA PVT LTD LOCATION: Navalakh Umbre Qualification: All ITI 16,780/- Facilities: • Bus & Canteen Facility • Only Male • General Shift Department: Production / Assembly / Quality / Stores Contact Number: 7741005871 | 7666320642 | 7709121966

FREE JOB HYUNDAI TRANSYS INDIA PVT LTD LOCATION: Navalakh Umbre Qualification: All ITI 16,780/- Facilities: • Bus & Canteen Facility • Only Male • General Shift Department: Production / Assembly / Quality / Stores Contact Number: 9226514195 | 9226514190 |

The opportunity We are looking for Field Engineer, to join our Pune office, who are curious, self-motivated, and willing to learn. You will be exposed to a range of tasks and projects, including: Reporting directly to the deployment manager and handling all the hardware and deployment related tasks in the company On-site Support: Provide on-site support to customers or clients. This may involve diagnosing and troubleshooting issues with equipment or systems, providing technical guidance, and answering customer questions. Installation and Commissioning: Carrying out complete installation of hardware on deployment locations. Hardware will include cameras, controller unit and cabling and routing. This involves understanding installation procedures, configuring equipment, and ensuring that everything is working as expected. Once installation is complete, commission the equipment or system to ensure that it meets performance specifications. Maintenance and Repairs: Responsible for providing routine maintenance and repairs for equipment and systems. This includes identifying issues before they become critical, performing regular maintenance tasks, and making repairs as needed. Documentation and Reporting: Maintain accurate documentation of all activities performed on-site. This may include maintenance reports, installation reports, and other documentation as required. Customer Service: Must have excellent customer service skills. Often being the primary point of contact for customers, you must be able to communicate effectively, provide guidance, and manage customer expectations. Safety: You must be aware of and comply with all safety protocols and procedures. This includes wearing protective equipment, following safety guidelines, and identifying potential hazards. Must also be able to travel frequently, work in different locations and environments, and adapt to changing situations. You should have a strong technical background, excellent problem-solving skills, and the ability to work independently. Procuring hardware and ensuring that it has been assembled and configured as per predefined standards. Conducting research on new hardware and testing it. Conducting training for security guards and managers. Should operate in flexible work timings as per requirements. Skills and attributes for success A bachelor's degree in engineering Minimum period of prior work experience of 6 months in Hardware / Networking Knowledge of Crimping, Routing and cabling Basic knowledge of networking and router configuration Knowledge of IP cameras and their configuration and testing Excellent problem-solving skills backed by solid technical knowledge. A versatile and service-oriented mindset. Good understanding of safety guidelines. Great communication skills. Technically savvy and computer literate. Strong multitasking abilities. Analytical and critical thinking skills. Ability to work under pressure and complete tasks in a timely manner. Valid driving license and possess personal bike & helmet Ability to work independently and as part of a team. Only Male Candidates

Assist in electrical maintenance, repairs, & installation Troubleshoot electrical issues & implement solution Learn & develop skills in electrical engineering Basic knowledge of electrical systems and circuit Ensure compliance with safety regulations Required Candidate profile Diploma or ITI in Electrical Engineering freshers Basic knowledge of electrical systems Interested candidates can share theire CVs on +91 6354377703 or marcom.vhr@gmail.com

We are looking for Service Engineer who is passionate about technology and eager to work hands-on with cutting-edge Audio-Visual systems . The ideal candidate will be responsible for installing, configuring, troubleshooting, and maintaining AV equipment at various client sites. Key Responsibilities Install and configure AV systems: projectors, speakers, amplifiers, displays, automation and control units (Crestron, Extron, etc.). Conduct routine maintenance, diagnostics, and service visits. Perform site surveys, testing, and commissioning. Read and interpret wiring diagrams, layout drawings, and AV schematics. Train clients on using the installed systems effectively. Maintain accurate service documentation and reports. Coordinate with internal teams to ensure seamless project execution. Travel to client locations as required and support emergency service calls. Required Skills Diploma/Degree in Electronics, Electrical, or related technical field. 1-3 years of relevant experience in AV or electronics servicing. Good understanding of cabling, connectors, wiring standards, and AV tools. Basic IP/networking knowledge is a plus. Ability to work independently and manage time across service calls. Strong communication and customer interaction skills. Bonus Skills (Preferred, Not Mandatory) Experience with automation/control systems (Crestron, AMX, RTI). Knowledge of AV over IP setups or enterprise-level display systems.

FREE JOB HYUNDAI TRANSYS INDIA PVT LTD LOCATION: Navalakh Umbre Qualification: All ITI 16,780/- Facilities: • Bus & Canteen Facility • Only Male • General Shift Department: Production / Assembly / Quality / Stores Contact Number: 9226536854

* Urgently Required Mechanic/ Technician. * Freshers Can apply * Local Candidates Preferred. * Location: Udupi ( Karkala)

Job Requirements 15+ years experience in Condition Monitoring of Turbo Machines and Rotating Equipment conversant in Online and Periodic offline monitoring of heavy duty Turbo Machines such as Compressors and Turbines Expert in Reliability, Engineering and Technical specialist support, Maintenance, troubleshooting, Condition and performance monitoring, advanced diagnostics, in large Oil and Gas, LNG, Petrochemical plants. ISO 18436 CAT-3 certified , experience System 1 Evo, Operation and Maintenance support, monitoring asset condition and performance, vibration analysis, fault finding, reliability, availability calculations and monthly reporting of equipment health and surveillance with corrective actions, improvements, to bad actor eliminations, and reliability and performance enhancement solution implementation. Technical authority and support in SAFE chart analysis, cause and effect analysis, Risk analysis according to RAM matrix, Review of PFD and P&IDs, HAZOP analysis, FEA analysis, Alarm and trip logics, Startup-shutdown sequence, control and trip sequence of Major Rotating equipment, systems, auxiliaries. Proficient in Rotor Dynamic and stability Analysis, rotor integrity tests, installation, commissioning, acceptance testing and approval. FAT & SAT procedure and acceptance criteria. Compliance to international standards, local regulations and standards, company policies and procedures. Experience in Root cause (failure) analysis (RCA), MTBF, FME(C)A, criticality analysis, RCM, Review of existing maintenance (REM) practices for setting strategy, Major equipment trip analysis and reporting with solutions recommendations, improved reliability, and performance enhancements. Examples of typical tasks that need to be executed Support and maintain day-to-day reliable operations and minimize equipment out of service. Develop and manage rotating PM (Preventive Maintenance) programs, evaluating equipment performance, recommending improvements and new technologies. Review and update the critical spare part list under your area and performing cataloguing activities. Provide technical supports to repair and overhaul of rotating equipment such as dismantling, diagnosing, assembling, testing and issue related technical reports. Support field installation, maintenance and repair of rotating equipment. Preforming technical investigation for repair jobs to identify root cause of failure, corrective repair actions and share the lesson learned to stake holders. Providing technical input for purchasing specifications including technical proposal evaluation. Providing technical support to the operation team during the entire lifecycle of the rotating equipment, analyzing their performances, operative conditions and boundaries, in order to guarantee reliable and safe operations. Performing reliability studies and preparing proposals for MOC to improve system effectiveness in terms of reliability. Managing a team for analysis of vibration data to investigate, troubleshoot rotating equipment problems using Prognost, GE System1 & MHM Build and manage the database of rotating equipment as condition monitoring perspective. Periodic monitoring of changes in levels of machinery vibration and fault diagnoses. Monitoring all field parameters related to lube oil system, seal system and others i.e. identifying if seal leaks, low lube oil level, abnormal sounds, oil leaks, process leak in such a way looking in overall condition of the rotating asset by proper condition monitoring. Collaboration with customer reliability specialists and central planners to prioritize repairs to identified equipment deficiencies. Preparation of weekly & monthly flash reports for machine condition. Reports any major changes in equipment condition and generate remedial action report. Assist in site acceptance test runs and commissioning new rotating equipment. Conduct Lube oil analysis of critical rotating equipments and generating recommendation reports Troubleshooting of bad actor equipment at plant. Troubleshooting and monitoring mechanical seals (wet seals and DGS) performance. Work Experience On-line Monitoring Off-line Monitoring Bearing Analysis Maintenance Basic RCFA Oil Analysis Rotor Dynamics Modal Analysis MTBF Reliability Ultrasound Bump Test Dynamic Balancing Asset Optimization Troubleshooting Laser Alignment NDT Basics Tests Thermography

Mega Placement at Gurgaon: Yazaki India Pvt Ltd- Farukh Nagar Qualification: 10th/12th/ITI/Diploma (Male & Female) Company Details: Yazaki India Pvt Ltd is an independent automotive component maker founded in 1941with Head Office in Japan. Group is involved in the production of a variety of automotive components chiefly for wire harness for all Automotive OEMs In INDIA like Suzuki, Maruti Suzuki, Fiat, TATA, Ford, Honda, Hero, Bajaj, TVS etc. Job Details: Candidates to work in Assembly line for manufacturing of Wiring Harness, Wiring Control Panels, Racks, Looming and Harness building. Ability to read engineering drawings and should be able to use Crimp Tools, Wire Strippers, etc. Salary Details Monthly Salary: Rs.16500/- CTC Per Month Monthly in-hand Salary: Rs.13500/- + PF/ESI/Canteen/Bus Attendance Bonus- Rs.1000/- per month Deduction: PF/ ESI/ PT/ Canteen Canteen Facility available Weekly Off, Duty hours 8hour OT: Extra Company Address: Yazaki India Pvt Ltd Horizon indusrial Road, Farukh Nagar, Haryana 122506 CONTACT: 9952180561

Balu Auto Components is looking for Wickman Multi Spindle Automatic Machine setter & Maint. technician to join our dynamic team and embark on a rewarding career journey. Perform routine inspections and maintenance on equipment and facilities. Troubleshoot and diagnose equipment and facility issues, and make repairs as needed. Collaborate with other maintenance technicians and engineers to troubleshoot and resolve complex equipment issues. Maintain accurate records of maintenance activities, including work orders, maintenance logs, and inventory records. Participate in the planning and scheduling of maintenance activities, ensuring that maintenance is performed on a regular basis to prevent breakdowns and ensure optimal equipment performance. Recommend improvements to equipment and facilities to increase efficiency, safety, and performance. Assist with the installation of new equipment and facilities, including the assembly and installation of machinery and equipment. Ensure that all maintenance activities are performed in accordance with safety regulations and company policies and procedures. Maintain a clean and organized work area, ensuring that tools and equipment are properly stored and maintained. Knowledge of safety protocols and the importance of following safety regulations.

Job Description All line DPR must be filled with accuracy and hourly reports must be maintained. Machine down time reduction. Material arrangement for lines. Machine process parameter check and optimization. Manpower Alignment and control as per skills. Machine /grinder/sprue picker must run effectively. All material released in shift. Cleaning of machines and floor. All machine material loaders must work and blower cleaning on time. Ensure no components or material falling on floor. Rejection and lumps verification for individual shifts. Mold change within time (40min) Key Requirement B.Tech/B.E. Number of Vacancies 6 Experience 3-6 years Apply Now

Assembly, Installation and Commissioning of Process Equipment Comfortable to travel approx. 15 days per month or more than that plant/field maintenance/servicing department of Equipment Mfg. company

Job Summary: The Factory Worker will be responsible for performing various tasks on the production line, assisting in manufacturing processes, and ensuring that products are produced efficiently and meet quality standards. This role requires attention to detail, adherence to safety procedures, and the ability to work effectively as part of a team in a fast-paced environment. Responsibilities: Production Line Operations: Operate and monitor machinery and equipment on the production line as per established procedures and instructions. Assembly and Fabrication: Perform assembly, fabrication, or packaging tasks accurately and efficiently as required by the production process. Material Handling: Load and unload raw materials, components, and finished products from machines, production lines, or storage areas, ensuring proper handling to prevent damage. Quality Control: Conduct basic quality checks on products to identify defects or inconsistencies. Report any quality issues to the supervisor immediately. Cleaning and Maintenance: Maintain a clean and organized work area, including equipment and surrounding space, to ensure a safe and efficient production environment. Perform basic cleaning and preventive maintenance on machinery as instructed. Safety Compliance: Strictly follow all safety regulations, company policies, and use required Personal Protective Equipment (PPE) at all times to ensure a safe working environment. Report any hazards or incidents promptly. Adherence to Procedures: Follow Standard Operating Procedures (SOPs) and work instructions for all tasks. Record Keeping: Assist with basic record-keeping, such as production counts or material usage logs, as directed by the supervisor. Team Collaboration: Work effectively and cooperatively with other team members, supervisors, and colleagues to achieve production goals. Troubleshooting (Basic): Identify and report any basic issues with machinery or production processes to the supervisor. Packaging and Labeling: Assist in packaging, labeling, and preparing finished products for shipment.

Good at soldering & de-soldering process Good knowledge of all kind of components & its testing Can repair PCB's of different types Good knowledge of using CRO & other tools used in repairing Can design testing zigs Required Candidate profile A candidate from Electronics background & experience in repair of PCB's with good knowledge of Electronic components & their testing. below are the Roles and Responsibilities: Can join Immediate

1. Responsible to execute activities for metallic parts as per daily plan assigned 2. Improve responsiveness to customer needs 3. Maintain quality standards and requirements in activities and output produced from assembly 4. Effective utilization of resources. 5. 100% Adherence to standard operation procudres to deliver components parts with Zero defects Responsibilities Accountabilities Responsible to execute activities in assembly function to ensure on time delivery of Defect free products, Spares and services Execution of assembly activities and looking for ways for improvement /driving continual improvement initiatives ideated by senior leaders on Quality, Delivery and Cos Follow/ suggest updation in assembly processes to enable continuous reduction in cost of production and work with a culture of cost consciousness in the organisatio Work towards for maintaining COPQ(Cost of Poor Quality) from assembly processes within the acceptable target limits Ensure responsiveness to customer needs Work with SIC and team for Customer complaint Analysis and resolution and Solving of key critical complaints using QC story methodology Work with the SIC to ensure amendments that arise due to internal and external customer requirements are met accurately Execute daily work load assigned by supervisors Engineers Adhering the Cyle time for all production parts Collect the BOM parts from assembly stores and Verify with router MTS for operation. Ensure the availability materials are provided by the assembly stores to acheive the target Following Maintaining the TQM and 5s in metallic shop Optimum utilization of resources like (Material, Machine) Manufacturing the FAI,Production parts out put with 100% quality Fallowing the Route card Process document executing the actvities as per process AOPs Guide the fresh technicians on job training to improove their skill level Ensure the machine/tool is working to the required level to meet the targets Assembly work instructions to be followed, using of Pneumatic Hand tools and cutting tools. Working Knowledge on Consumables specification, Preparation Application and shelf life, Expiry details Jigs Fixtures calibration to check before starting of work. Ensure the inspection parameters as mentioned in MTS by filling SIR report with respective calibrated instruments Stages to be moved on ERP after completing the work order operations. OLE (Work order scanning) should be achieved more than 90 percentage as planned. Follow PPE In Work Place Identify Near miss and implemented kaizen for every month. Working knowledge on Bush Helicoil and Pin installation opeartions Work with the automation team to identify use cases and drive automation / process improvement initiatives within the assembly function Update oneself on the latest technologies and tools within assembly and suggest / use these within the function Drive continuous learning and skilling of operators on soft and hard skills essential for the assembly department Track performance measures of the operators and individuals to consistently provide feedback and improve performance

Assembly & Install mechanical system & equipment Read 7 interpret drawing Use hand & power mechanical tools Required Candidate profile Ready to work in shifts & responsibly Active & Quick learner Knowledge about 5S & Kaizen Perks and benefits On Roll - PF, ESIC, Bonus, Gratuity.

Responsibilities: Good knowledge of Panel Assembly with hands on experience Lead a team of 10 to 15 members and effectively train new members Organize and manage Assembly workflows and resources Be able to adapt and follow SOPs related to machine assembly Plan and implement assembly schedules effectively. Resolve issues and delays in production and ensure timely adherence to plan. Creating product documentation and records. Inspecting electrical components during and after the product installation. QC checks as per quality tolerance standards and prepare reports Prepare production reports for MIS Knowledge of safety and environmental regulations. Kaizens and improvements. Effective communication with suppliers Collaborate with other vendors engineers, contractors and suppliers. Work closely with receiving stores, inward inspection, QC & QA WIP & Inventory Control Conduct internal audits to assure compliance to organizational, departmental, regulatory & customer policies. Required Skills: Capable to read and assemble an electrical manual independently Hands on experience in installation of control panels (LV) Previous experience as a manufacturing/assembly engineer or similar role. Knowledge of fitting of lugs and wire tagging Familiarity with manufacturing equipment and quality assurance techniques. Commitment to health and safety standards and environmental regulations. Well-versed in relevant software (e.g. CAD, MS Office). Project management skills. Problem-solving ability. Teamwork skills. Diploma / Degree in Engineering. Using industry-specific tools to analyse and test electronic part like PLC.

locationsBangalore, Indiaposted onPosted 7 Days Ago job requisition id30677 The Opportunity As a Customer Support Engineer, you will provide remote technical support to internal and external clients globally for both hosted and on-premise solutions by supporting our diverse product portfolio.Youll collaborate through innovation with IT, operations teams, product development and product management. VP, Customer Support. What Youll Contribute Product/Customer support for global clients. Manage the flow of customers incidents via telephone, cases/incidents, and working with next level support, infrastructure teams, product teams and manage end-to-end communication with clients based on agreed SLAs. Triage and escalate incidents in a timely manner according to standard operating procedures. Act as a liaison between engineering and consulting teams to resolve incidents. Maintain and determine ways to improve the customer experience, always demonstrating a strong client-focus with professional communication. What Were Seeking Bachelors degree or equivalent. Sound understanding in managing, handling, and troubleshooting multi-tier cloud applications/software products and on-premise solutions. Good customer-facing skills in general to handle phone and emails of clients. Good understanding about enterprise level application support and infrastructure support. Good knowledge on cloud platform. Flexible to work primarily in shifts. Demonstrates the ability to troubleshoot issues, disturbances, and failures in platform and systems, and work with internal and external stakeholders to restore functionality. Ability to prioritize and manage multiple incidents. Demonstrated ability to interact with diverse customer base successfully. Knowledge/prior exposure to incident/problem/change management. Understanding of ITIL framework. Knowledge of AWS concepts. Excellent written and verbal skills. Our Offer to You An inclusive culture strongly reflecting our core valuesAct Like an Owner, Delight Our Customers and Earn the Respect of Others. The opportunity to make an impact and develop professionally by leveraging your unique strengths and participating in valuable learning experiences. Highly competitive compensation, benefits and rewards programs that encourage you to bring your best every day and be recognized for doing so. An engaging, people-first work environment offering work/life balance, employee resource groups, and social events to promote interaction and camaraderie.

Able to apply a logical, methodical, and analytical approach to isolate and solve technical problems. Able to communicate and to work with other technicians, departments, and customers in technical support situations. Demonstrates and applies greater knowledge of the company’s product. Able to exercise limited discretion in deviating from standard practice to solve problems within the area of experience. Researches problems and recommends solutions. Assists in the provision of on-job-training. Professionally process and resolve asset request cases that support proper accounting for site inventory Maintain site inventory with zero discrepancy through adherence of asset management procedures Inbound and outbound fulfillment that enables achievement of business deliverables Ensure that any asset defects, damages, discrepancies or deviations are escalated to management for timely support and resolution Able to work in shift rotations that may include day, evening, overnight and/or during weekends, holiday Able to work in various IBM Cloud locations in Mumbai Required education Bachelor's Degree Required technical and professional expertise Customer Support – We require physical server hardware experience (Assembling of Servers like Motherboards, RAM, Hard disk, Raid Controllers, network cards etc). OS exp is a plus, emphasis on physical server hardware exposure Responsible for scheduling and performing hardware maintenances for IBM Cloud customers that involve upgrades, downgrades, support requests, etc. Physical hardware upgrades/downgrades referring to Server Hardware like RAM, Hard drives, Processors, Network cards etc.. Troubleshoot and resolve problems with basic physical network cable/device connections at server/switch/stack for network devices in the Data center physically. Person must worked in the physical Data center with 100% onsite experience. (NO REMOTE SUPPORT) 24/7 Operations with 100% onsite support (No Remote or On call support). No specific shifts, Rotating shift schedule Outage \ UIP Response (Row \ Datacenter Level Outage) - Responsible for responding to UIP related events around physical infrastructure. Coordinating with internal departments to resolve outage events around faulty links, optics, or failed Networking devices. Physical Infra servers knowledge along with basic understanding of network devices (Like network phyiscal cabling and Optics and inter Connectivities etc) to extend onsite support for the remote Network teams and Network ISPs personel. Outage events are performed under the supervision and guidance of Site Management. Other Tasks: May be directed to perform other duties consistent with training and skill levels required for this position. Preferred technical and professional experience Understand site capacity utilization andprovide assistance with Management on capacity planning.

Job Title: Desktop Support Engineer Accommodation & Cab Provided Key Responsibilities: Ensure compliance with Service Level Agreements (SLAs) and timely issue resolution. Manage and troubleshoot hardware desktops, laptops, printers, plotters, and IoT devices. Assemble, install, configure, and maintain IT infrastructure. Handle passive networking tasks like cabling, crimping, punching, and IO testing. Apply system updates and patches as needed. Manage user policies, group email IDs, and provide end-user support for: Windows OS MS Office, Office 365, OneDrive (E1, E3, E5) Provide remote support using tools like Team Viewer, AnyDesk, SCCM, Microsoft Teams, and more. Troubleshoot and replace hardware components for branded systems (Dell, HP, Lenovo, etc.). Coordinate internet connectivity issues (leased line/broadband). Support and collaborate with the helpdesk engineer team for escalated issue resolution. Required Skills & Experience: Proven experience in hardware troubleshooting and network support. Strong understanding of Ethernet and network cabling. Experience with IT service management and remote desktop tools. Familiarity with engineering application support.

SUMMARY UV Printing Machine Technician Minimum 5 years Gulf experience candidate needed. Abilities - Required specialization Graphic designer Expected job duties Graphic designer Required conditions and qualifications Experience is more important than degrees Required years of experience 5 or more(must be gulf experience) Specified salary. Requirements Accommodation availability Housing available Number of weekly working hours 78 hours Available weekly vacation One day only Required languages? English and Arabic Benefits Benefits