52 Arm Cortex Jobs

You are a Staff Digital IC Design Engineer in the Digital Compute Team at onsemi. Your main responsibility is to develop embedded MCU/DSP systems and hardware accelerators for a variety of processor cores. You will also provide consultation to product integration teams during the integration of these solutions into semiconductor products. Join a dynamic team that creates a diverse set of world-class products in a friendly and team-oriented atmosphere. Benefit from continuous learning and growth opportunities, support volunteer & charitable programs, and enjoy a competitive benefits package. Build a rewarding career in a successful international company and engage in exciting international projects. Your key responsibilities include: - Architecting, specifying, implementing, simulating, and benchmarking MCU and DSP systems as well as hardware accelerators - Consulting product integration teams in defining, integrating, and using these systems - Participating in the verification and FPGA prototyping of these systems - Coordinating SDK development with the software team - Leading project activities - Contributing to design methodology and design flow improvements Requirements: - Minimum BS/MS in Electrical Engineering or related technical field - At least 8 years of relevant work experience in semiconductor product development with engineering leadership roles - Experience with embedded CPUs (e.g. ARM Cortex, DSP), AMBA bus protocols (AHB/APB) - RTL design of digital IP blocks and systems in Verilog/SystemVerilog - Proficiency in technical document writing - Excellent English written and verbal communication skills Additionally, experience in project/task leadership, design of CPU/MCU (sub)systems, SystemRDL or IP-XACT, programming in Python for automation and in C/C++ for embedded software, design intent (timing constraints/SDC, power intent/UPF), design of signal processing components, RTL to GDS flow, including logic synthesis, place-and-route, STA, power analysis, and advanced digital verification methodology (e.g. UVM) would be beneficial. Join onsemi (Nasdaq: ON) to drive disruptive innovations and help build a better future in automotive and industrial end-markets. Contribute to megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. Be part of a company that creates intelligent power and sensing technologies to solve the world's most complex challenges and lead the way in creating a safer, cleaner, and smarter world. onsemi is committed to providing a positive recruitment experience and attracting high-performance innovators to build a great place to work. Operating in a diverse, inclusive, and socially responsible environment, you will have the opportunity to shape a better future and define your career path. Join onsemi and be part of a team that transforms tomorrow.,

As a Firmware Engineer specializing in TinyML, you will be responsible for developing intelligent low-power devices that operate efficiently without the need for internet connectivity. Your primary focus will be on bringing machine learning capabilities to the edge by deploying TinyML models on microcontrollers and ultra-efficient hardware. You will have the opportunity to work on cutting-edge products that integrate embedded systems, AI, and sensor fusion to create smart, secure, and responsive edge devices for various industries such as health tech, industrial IoT, and consumer electronics. Your responsibilities will include developing, optimizing, and deploying TinyML models, writing clean and efficient embedded C/C++ firmware for microcontrollers like ARM Cortex-M, integrating real-time sensor data for low-latency inference pipelines, collaborating with data scientists to compress and port models, and ensuring performance, memory, and energy efficiency. Additionally, you will conduct testing and debugging on physical devices to ensure the reliability and functionality of the firmware. To excel in this role, you should have a strong background in embedded systems and C/C++, hands-on experience with TinyML frameworks such as TFLite Micro and Edge Impulse, familiarity with ARM Cortex-M microcontrollers or similar hardware, understanding of ML model optimization techniques like quantization and pruning, proficiency in sensor interfacing, low-level drivers, and debugging tools. Experience with audio or motion recognition and low-power hardware design would be considered a bonus. If you are passionate about pushing the boundaries of intelligent edge devices and have the skills and experience required to thrive in a dynamic and innovative environment, we encourage you to apply for this exciting opportunity as a Firmware Engineer specializing in TinyML systems.,

You are an experienced Senior Firmware Developer who will be responsible for leading the design, development, and optimization of embedded firmware for complex systems. Your deep expertise in embedded systems, strong problem-solving skills, and ability to mentor junior engineers will be crucial. You will drive the firmware development process to ensure high performance and reliability in real-time systems, collaborating with cross-functional teams to bring innovative hardware-software solutions to market. Your key responsibilities will include leading the design and development of robust, scalable, and efficient firmware architectures for embedded systems, writing and optimizing high-performance, low-level firmware in C/C++, working closely with hardware engineers to influence hardware design for smooth integration, optimizing firmware for power consumption, memory usage, and real-time performance, developing and executing comprehensive testing plans, mentoring junior firmware developers, creating and maintaining technical documentation, leading efforts to improve development processes, tools, and methodologies, and collaborating with cross-functional teams to ensure timely and high-quality project delivery. To qualify for this role, you should have a Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field along with 5+ years of hands-on experience in embedded firmware development. You should have a proven track record of developing and shipping firmware for commercial products, experience with Real-Time Operating Systems (RTOS) and bare-metal systems, expertise in embedded C/C++ and assembly language, extensive experience with hardware interfaces, and experience working with embedded processors. Additionally, you should have a deep understanding of embedded system architecture, proficiency with debugging tools, strong knowledge of communication protocols, familiarity with bootloaders, file systems, memory management, and peripheral drivers, experience with version control, continuous integration, and automated testing for embedded systems, and knowledge of cybersecurity practices in embedded systems. Preferred qualifications include experience in low-power embedded systems design, IoT devices, cloud connectivity, Agile methodologies, and DevOps practices. In terms of soft skills, you should possess strong leadership and mentorship abilities, excellent communication and collaboration skills, a problem-solving mindset, attention to detail, commitment to quality, ability to manage multiple projects and meet tight deadlines, and be innovative and proactive in driving improvements and solving technical challenges. The benefits of this role include a competitive salary, performance bonuses, health, dental, and vision insurance, 401(k) with company match, flexible working hours, remote work options, opportunities for professional growth and leadership development, and access to cutting-edge technology and tools.,

About Futuristic Labs Are you ready to be a part of a company that doesn't just dream about the future but actively builds it Welcome to Futuristic Labs, an Innovation Studio based in Hyderabad, India, where bold ideas turn into impactful products that make life better. We're on a mission to free up human potential by automating everyday tasks. From transforming the way people cook with Riku and Semi, to enabling creators through Klynk Recipes, we're building a future where technology truly serves humanity. If you're passionate about solving real-world problems through hardware and software, we invite you to #BuildWithUs. What You'll Do As a Senior Embedded Firmware Engineer, you'll work on the core systems powering our smart kitchen products. You'll bridge hardware and software, driving the performance, reliability, and intelligence behind our devices. Write and optimize embedded C/C++ firmware for real-time control of kitchen automation devices. Stress test and improve the Python-based application code running on Raspbian OS. Design and implement robust communication interfaces (UART, I2C, SPI, MQTT, etc.). Develop interface code for actuators, sensors, and peripherals. Collaborate with product, mechanical, and design teams to build rapid functional prototypes. Build and deploy test setups using Arduino, Raspberry Pi, or similar platforms. Debug hardware and firmware, and work hands-on with PCBs and test jigs. Document architecture, workflows, and hardware-software interaction protocols. Support the manufacturing and assembly team by designing and testing quality control setups. Requirements - Bachelors or Masters in Electrical Engineering, Computer Science, or a related field - 6+ years of hands-on experience in embedded firmware development - Strong proficiency in C/C++ for real-time systems - Working experience with Python scripting and automation - Comfortable with Linux environments (Ubuntu or Raspbian OS preferred) - Familiarity with communication protocols: UART, I2C, SPI, MQTT, Socket.io - Experience with Arduino, Raspberry Pi, ARM Cortex, or similar platforms - Understanding of embedded hardware: motors, actuators, sensors, drivers - Strong debugging, analytical, and system-level thinking skills - Bonus: Experience in writing unit tests, CI/CD for firmware, or production-scale deployments Benefits - The opportunity to shape intelligent, human-centric products from the ground up - A collaborative and dynamic work culture that values deep work and innovation - Ownership and autonomy to bring your ideas to life - A team that pushes boundaries, iterates fast, and builds with purpose - Free (and delicious!) food from our kitchen robots,

Learn everything about RISC-V ISA and its extensions. Build reusable test libararies and test suites for compliance testing. Required Skill Set Must have good knowledge of python scripting Basic computer architecture knowledge. Good to have experience with FPGAs, RISC-V ISA

As an Embedded Systems Trainer, you will be responsible for delivering advanced training sessions covering a wide range of topics including advanced C programming, C++ programming, Autosar, Python programming, GUI development, ARM7, ARM CORTEX, PIC, AVR Atmega, communication protocols, real-world interfacing, single board computers, Embedded AI with TinyML and EDGE AI, RTOS, Embedded networking, IOT, Embedded Linux and device drivers, robotics, and PCB designing. This role involves providing comprehensive instruction and guidance to enhance the skills and knowledge of participants in embedded systems. You will play a crucial role in facilitating learning in various areas of embedded systems technology, ensuring that participants gain a deep understanding of the subject matter. The ideal candidate should have a strong grasp of the aforementioned topics and be able to effectively communicate complex concepts in a clear and concise manner. Additionally, the ability to engage and motivate participants throughout the training sessions is crucial for success in this role. This is a full-time, permanent position with benefits such as commuter assistance and internet reimbursement. The work location is in person, and the expected start date for this role is 28/07/2025.,

Sound knowledge of Embedded SW in C, C++, Real Time OS Expert in coding in Embedded C/C++ (Knowledge of C#, python a plus). Familiarity and hands-on experience in firmware development - ARM Cortex processors, Working Knowledge of serial / network communications including UART, I2C, SPI, Ethernet (TCP/IP, UDP), CAN, RS485 Knowledge of software tests and static code analyses Ability to understand and debug problems across hardware/software boundaries. Strong debugging skills, ability to use oscilloscope and logic analyzer for troubleshooting. Knowledge of IEC 62304/ISO13485 standards is added advantage.

Job Requirements Software developer firmware MCU bringup and firmware development RTOS porting Develop/port low-level drivers for sensors (accelerometers, gyros, magnetometers, temperature, proximity, ambient light, etc.). Collaborate with cross-functional teams (hardware, firmware, QA, product) to deliver reliable sensor functionality. Optimize memory, performance, power, and responsiveness of sensor subsystems. Debug and resolve driver and user-space issues related to sensor data. Language English Business level (Good communication and presentation skills required) Work Experience Basic understanding of C/C++ for embedded systems Familiarity with ARM Cortex-M or similar microcontrollers Exposure to RTOS (FreeRTOS, Zephyr, etc.) Ability to read datasheets and understand peripheral interfaces (I2C, SPI, UART) Basic debugging with JTAG , SWD , or GDB Familiarity with Git and version control workflows Exposure to MCU bring-up and flashing tools Basic knowledge of low-level drivers and sensor interfacing Basic understanding of power constraints and memory usage in embedded systems Understanding of Agile/Scrum principles (as a participant) Mandatory Embedded C/C++ with over 2+ yrs experience ARM Cortex-M (v8+) with over 2+ yrs experience 2+ yrs Embedded experience overall 1+ yr of Hands-on experience FreeRTOS/Zephyr: Qualification Bachelors in Electronics and Communication, Computer Science or Related field with minimum 2 years of experience or Masters in Electronics and Communication, Computer Science with minimum 1 year of hands-on development experience

Project Role : Business Function Implement Practitioner Project Role Description : Support the implementation of activities for a specific business function to improve performance for a function end to end. Activities include analyzing and designing/re-designing business processes and/or defining parts of an organization. Must have skills : Infor M3 Process Manufacturing & Distro, Technical Writing Good to have skills : Technical DocumentationMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Business Function Implement Practitioner, you will support the implementation of activities for a specific business function aimed at enhancing overall performance. A typical day involves collaborating with various stakeholders to analyze current business processes, identifying areas for improvement, and designing or redesigning processes to optimize efficiency. You will engage in discussions to gather insights, facilitate workshops, and document findings to ensure that the proposed changes align with organizational goals. Your role will also require you to monitor the implementation of these processes, ensuring that they are effectively integrated into the business function. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Facilitate workshops and meetings to gather requirements and feedback from stakeholders.- Develop and maintain comprehensive documentation of business processes and changes. Professional & Technical Skills: - Must To Have Skills: Proficiency in Infor M3 Process Manufacturing & Distro, Technical Writing.- Good To Have Skills: Experience with Technical Documentation.- Strong analytical skills to assess business processes and identify improvement opportunities.- Ability to communicate complex ideas clearly and effectively to diverse audiences.- Experience in process mapping and redesign methodologies. Additional Information:- The candidate should have minimum 3 years of experience in Infor M3 Process Manufacturing & Distro.- This position is based at our Pune office.- A 15 years full time education is required. Qualification 15 years full time education

Project Role : Business Function Implement Practitioner Project Role Description : Support the implementation of activities for a specific business function to improve performance for a function end to end. Activities include analyzing and designing/re-designing business processes and/or defining parts of an organization. Must have skills : Infor M3 Process Manufacturing & Distro Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Business Function Implement Practitioner, you will support the implementation of activities for a specific business function aimed at enhancing performance across the entire function. Your typical day will involve collaborating with various stakeholders to analyze current processes, identify areas for improvement, and design effective solutions that align with organizational goals. You will engage in discussions to gather insights, facilitate workshops, and contribute to the overall strategy for process optimization, ensuring that the changes implemented are sustainable and beneficial for the organization. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Facilitate workshops and meetings to gather requirements and feedback from stakeholders.- Analyze existing business processes and identify opportunities for improvement. Professional & Technical Skills: - Must To Have Skills: Proficiency in Infor M3 Process Manufacturing & Distro.- Strong understanding of business process modeling and analysis.- Experience with change management methodologies.- Ability to work collaboratively in a team environment.- Familiarity with project management tools and techniques. Additional Information:- The candidate should have minimum 3 years of experience in Infor M3 Process Manufacturing & Distro.- This position is based at our Pune office.- A 15 years full time education is required. Qualification 15 years full time education

You are invited to join Glide Technology as a Team Lead for the Embedded Software Team. In this role, you will have the opportunity to oversee a team of 4-8 engineers, provide guidance, define project architecture, and ensure the successful implementation of intricate embedded software projects. Your main responsibilities will include collaborating on the design of complex projects focusing on Microprocessors, Microcontrollers, and hybrid architectures. You will demonstrate adaptability to various technologies, engage in hands-on coding, and maintain meticulous documentation. Additionally, you will be responsible for conducting thorough reviews, establishing and enforcing coding and debugging best practices within the team. Your role will also involve participating in recruitment activities, contributing to pre-sales efforts, and demonstrating a holistic technical and client-oriented approach. The ideal candidate for this position should possess 8-10 years of programming expertise in C/C++/Python, with a specialization in device driver and application development for Linux/FreeRTOS/BareMetal environments. Hands-on experience with ARM Cortex A/M SoCs, particularly in board bring-up, is preferred. Familiarity with build systems like Yocto, BuildRoot, or equivalent systems is also desirable. Proficiency in tools such as Oscilloscope, Analyzer, GDB, valgrind, git, CI/CD, and static analysis is required. Effective communication skills are essential for engaging with both the team and customers. A holistic project management approach integrating technical proficiency, efficient team leadership, and customer-oriented communication skills is crucial for project success. Additional expertise in pre-sales activities will further enhance your versatility and value to the organization. Glide Technology, with over a decade of experience, specializes in delivering innovative embedded software and hardware solutions with a process-oriented approach to product design. Serving various industries including IoT, Automation, Wearables, and Healthcare Devices, Glide Technology operates globally in countries such as the US, UK, Singapore, Germany, and India. The company is headquartered in Ahmedabad, Gujarat, India, with a sales office in California, US. Joining Glide Technology offers numerous benefits, including a competitive salary, exposure to cutting-edge technologies, collaboration on impactful projects worldwide with global clientele, comprehensive group medical insurance, retirement plans, paid time off, continuous learning and development opportunities, a supportive and innovative work environment, performance rewards and awards through recognition programs, and work-life balance initiatives through wellness programs.,

RTL DESIGN LEAD ENGINEER The ideal candidate will be required to work on both IP development and integration into SoCs catering to various markets and tech nodes. The job will involve RTL design, front-end tools flow, and SoC integration/porting-related tasks. Desired Skills and Experience- 8+ years of Experience Engineering experience with exposure to front end ASIC tool flows Should be self-driven and independent in tracking and closing tasks with respective holders. In depth knowledge of AHB and bus infrastructures like matrix and fabrics Good understanding of ARM based SoC Architecture Exposure to ARM Cortex A/M integration or support Good understanding of SoC DV methodology Good experience in Low-Power design methodology Hands-on experience with ASIC tools Lint, CDC etc System Verilog/Verilog RTL coding Power aware RTL coding/design knowledge Understanding of Clock-Structures/Scheme Good Communication Skills Job Category VLSI (Silicon engineering) Job Location IndiaBangalore IndiaHyderabad IndiaNoida Malaysia Singapore SwedenStockholm USATexas

JD: * Design,develop,test & maintain firmware using Embedded C/C++ on Arm Cortex microcontrollers with RTOS & MQTT protocol communication . 2+ years of experience in firmware development . Knowledge of hardware interfaces & protocols (SPI, I2C, UART,). Health insurance Provident fund

As an Electronics Engineer in Ahmedabad on a full-time basis, you will be responsible for designing and optimizing low-noise analog front-end (AFE) circuits and efficient DC-DC power supply circuits. Your tasks will involve selecting and integrating high-resolution ADCs, precision op-amps, and mixed-signal conditioning circuits. Additionally, you will develop bias voltage circuits for detectors and work towards minimizing thermal drift. PCB layout for low-noise analog systems, including shielding, grounding, and EMI/EMC mitigation, will be part of your responsibilities. Collaboration with the FPGA team for sensor calibration and data acquisition is also expected. To excel in this role, you should have at least 5 years of experience in analog/mixed-signal design, preferably for sensors and imaging. Any previous work experience with ISRO would be a plus. Hands-on experience with low-noise pre-amplifiers, high-resolution ADCs, PCB design tools, DC-DC converters, LDOs, power sequencing, thermal electric cooler (TEC) drivers, thermal simulation tools, and low pass filters is essential. Familiarity with thermal IR detectors and knowledge of thermal stability techniques are desirable qualifications. Your educational background should include a B.Tech/M.Tech in Electronics Engineering or a related field. As an Embedded Systems Engineer (FPGA & Digital Design) in Ahmedabad on a full-time basis, you will be responsible for FPGA-based image processing, implementing real-time algorithms for imager on FPGA using VHDL/Verilog. You will optimize high-speed sensor interfaces for detectors and implement data compression/streaming using protocols like GigE, USB3, or custom protocols. Additionally, you will integrate microcontrollers (ARM Cortex, RISC-V) for system control, design digital logic circuits for peripheral interfacing, and collaborate on embedded firmware for real-time operation. System integration tasks will include bridging FPGA + MCU communication and debugging mixed-signal PCB designs. To succeed in this role, you should have at least 3 years of experience in FPGA + Embedded Systems, with a preference for imaging/sensor applications. Proficiency in VHDL/Verilog and experience with high-speed serial protocols is required. Hands-on experience with ARM Cortex, RISC-V, or PIC MCUs, along with familiarity with digital interfaces such as I2C, SPI, UART, and PWM, will be beneficial. Your educational background should include a B.Tech/M.Tech in ECE/Embedded Systems/Digital Electronics.,

Capgemini Invent is the digital innovation, consulting, and transformation brand of the Capgemini Group. As an Edge AI Data Scientist, you will be responsible for designing, developing, and validating machine learning models, particularly in the domain of computer vision, for deployment on edge devices. This role entails working with data from cameras, sensors, and embedded platforms to enable real-time intelligence for applications such as object detection, activity recognition, and visual anomaly detection. Collaboration with embedded systems and AI engineers is essential to ensure that models are lightweight, efficient, and hardware-compatible. To be successful in this role, you should have a Bachelor's or Master's degree in Data Science, Computer Science, or a related field, along with at least 3 years of experience in data science or machine learning with a strong focus on computer vision. Experience in developing models for edge deployment and real-time inference, familiarity with video/image datasets, and deep learning model training are also required. Proficiency in Python and libraries such as OpenCV, PyTorch, TensorFlow, and FastAI is essential. Additionally, you should have experience with model optimization techniques (quantization, pruning, etc.) for edge devices, deployment tools like TensorFlow Lite, ONNX, or OpenVINO, and a strong understanding of computer vision techniques (e.g., object detection, segmentation, tracking). Familiarity with edge hardware platforms, processing data from camera feeds or embedded image sensors, strong problem-solving skills, and the ability to work collaboratively with cross-functional teams are all important skills for this role. Your responsibilities will include developing and training computer vision models tailored for constrained edge environments, analyzing camera and sensor data to extract insights and build vision-based ML pipelines, optimizing model architecture and performance for real-time inference on edge hardware, validating and benchmarking model performance on various embedded platforms, collaborating with embedded engineers to integrate models into real-world hardware setups, and staying up-to-date with state-of-the-art computer vision and Edge AI advancements. At Capgemini, we value flexible work arrangements to provide support for maintaining a healthy work-life balance. Our focus is on your career growth, offering a variety of career growth programs and diverse professions to support you in exploring a world of opportunities. You will have the opportunity to equip yourself with valuable certifications in the latest technologies such as Generative AI. Capgemini is a global business and technology transformation partner, helping organizations accelerate their transition to a digital and sustainable world while creating tangible impact for enterprises and society. With a team of over 340,000 members in more than 50 countries, Capgemini leverages its 55-year heritage to deliver end-to-end services and solutions utilizing strengths from strategy and design to engineering, with market-leading capabilities in AI, cloud, and data, combined with deep industry expertise and a partner ecosystem. The Group reported 2023 global revenues of 22.5 billion.,

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: The compiler team at Qualcomm Innovation Center is seeking talented compiler engineers to optimize LLVM for Qualcomms proprietary processors. As a member of the compiler team, you will Research, design, and implement different compiler optimizations to improve runtime and memory characteristics of software applications Analyze software requirements, consult with architecture and HW engineers, and devise compiler solutions for Qualcomms next generation architectures Analyze and identify system level integration issues, interface with the software development, integration and test teams. PositionEngineer LocationHyderabad Education B.Tech/M.Tech/PhD in Computer Science Engineering Minimum Qualifications 0-2 years of academic or industrial experience in the following areas is required Compiler development/Strong desire to work in this domain C/C++ programming Preferred Qualifications Development experience with LLVM framework Knowledge of ARM/AArch64, RISC-V ISA Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Applicants Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

As a Systems Architecture Lead, you will be responsible for the development of systems and product architecture for advanced Application Processors. Your role will involve collaborating with hardware engineering, software engineering, and application/solutions engineering teams to create scalable and robust solutions that cater to the requirements of advanced microprocessor products in Industrial, IOT, and Automotive Edge markets. A deep technical understanding of MPU hardware and software architecture, Solutions Engineering, Use Case Analysis, Validation, Optimization, and system integration is crucial for this position. Key Responsibilities: - Drive the definition and development of MPU architecture in alignment with market trends and industry standards. - Collaborate with product marketing teams and customers to translate requirements into detailed specifications. - Define and document use cases for the product. - Design efficient computing architectures, including multi-core processing, high-end CPU, DSP, Vision processing, Machine Learning, and memory hierarchy. - Integrate security mechanisms like secure boot, cryptographic accelerators, and trusted execution environments. - Ensure seamless system-level integration of MPU product components by collaborating with hardware, firmware, software, and solutions/application engineering teams. - Conduct power and performance benchmarking, analysis, and optimization. - Develop strategies to optimize performance, energy efficiency, and thermal management while ensuring reliability and scalability. - Own key performance indicators for programs and drive optimization. - Define architectural guidelines, best practices, and documentation to guide product development teams. Required Qualifications: - Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field with 15 years or more relevant experience. - Proficiency in use-case analysis and decomposition. - Experience with Linux, Zephyr, Free RTOS, or similar operating systems. - Strong understanding of microprocessor and microcontroller architectures, including CPU cores, DSP, memory management, and peripheral integration. - Experience in system-level performance optimization, low-power design, SW/HW co-design, and real-time processing. - Familiarity with high-speed interconnects, memory architectures, DDR, PCIe, and bus protocols. - Excellent collaboration skills to work across multidisciplinary teams. - Experience in product development processes. Preferred Qualifications: - Experience with ARM Cortex and/or RISC-V architecture. - Experience with media processing, vision and imaging applications. - Proficiency in system-level simulation tools, hardware/software co-design, and debugging techniques. - Familiarity with Machine Learning Hardware IPs, tools, and architecture. - Knowledge of functional safety and security standards. - Familiarity with Wi-Fi integration, networking protocols, and secure wireless communication.,

Notice Period: Immediate to 15 Days Employee type: Contract to Hire Skills : Hands on experience on Embedded Linux / Linux Experience with ARM based processors ( TI ARM Cortex A9 is advantage) Linux Kernel Compilation and image creation Linux Kernel Configuration Linux Kernel Optimization Linux Porting BSP Optimization Application development on Linux Platform Device drivers Knowledge on Secure Boot Knowledge on Booting Linux from NAND or eMMC storage

As a Systems Architecture Lead, you will be responsible for the development of systems and product architecture for advanced Application Processors. Your role will involve collaborating with hardware engineering, software engineering, application/solutions engineering teams to design and create scalable, robust solutions for our advanced microprocessor products targeting Industrial, IOT, and Automotive Edge markets. A deep technical understanding of MPU HW & SW architecture, Solutions Engineering, Use Case Analysis, Validation, Optimization, and system integration is essential for this role. Your key responsibilities will include driving the definition and development of MPU architecture in alignment with market trends and industry standards. You will work closely with product marketing teams and customers to translate requirements into detailed specifications. Furthermore, you will be responsible for defining scalable computing architectures, integrating security mechanisms, collaborating with cross-functional teams, and optimizing power and performance benchmarks. To qualify for this role, you should hold a Bachelors or Masters degree in Electrical Engineering, Computer Engineering, or a related field with 15 years or more of relevant experience. Additionally, experience in use-case analysis, Linux, Zephyr, Free RTOS or similar operating systems, microprocessor and microcontroller architectures, system-level performance optimization, low-power design, SW/HW co-design, and real-time processing is required. Strong collaboration skills and familiarity with high-speed interconnects, memory architectures, bus protocols, and product development processes are also necessary. Preferred qualifications include experience with ARM Cortex and/or RISC-V architecture, media processing, vision and imaging applications, system-level simulation tools, Machine Learning Hardware IPs, functional safety, and security standards. Familiarity with Wi-Fi integration, networking protocols, and secure wireless communication would be advantageous. In this role, you will play a crucial part in designing and developing cutting-edge solutions for advanced microprocessor products, contributing to the success and innovation of our products in Industrial, IOT, and Automotive Edge markets.,

3 years of experience Pre/Post Silicon Validation: Develop and deploy embedded diagnostic software for custom SOCs. Hands-on experience with FPGA, chip bring-up, etc. Expertise in working with and programming different chip peripherals. Hardware bring-up on SoCs, prototyping and emulation systems, Bare Board Bring Up Experience with the development of real-time embedded systems, microcontrollers, FPGAs, and ARM processors Substantial and proven C programming knowledge, CMSIS/Assembly Programming Strong background in highly resource-constrained, real-time, embedded environments Experience some of the popular MCU, e.g., ARM Cortex (M0, M55, A53), RISC-V Experience with various peripherals such as PCIe, USB, SDIO, SPI, I2C, I2S, GPIO, etc. Excellent debugging skills, including proficiency with oscilloscopes, logic analyzers, spectrum analyzers Experience in the use of modern software development tools,

Urgent Opening for Canvendor! Hiring: Design Verification Engineer (5+ Years Experience) | Bangalore, Hyderabad, Pune | Immediate Joiners Preferred Location: Bangalore, Hyderabad, Pune, India Experience: 5+ Years Notice period: Immediate to 30days Skills Highlighted: System Verilog, Verilog, UVM, AMBA, SOC, IP / ARM Cortex Key Requirements(IP Verification): Extensive experience in executing IP verification or subsystem verification of complex blocks or SOC verification. Excellent in System Verilog (SV), Universal Verification Methodology (UVM), test bench component development, assertions, testbenches, test plans, and coverage. Strong experience in verifying Fabric/NOC/Interconnect blocks. Knowledge of protocols such as AMBA suite (AXI/ACE), PCIe, CXL, interrupt handling, and power management. Experience or knowledge of coherent traffic verification is a plus. Key Requirements(ARM): Strong experience in ARM based SOC and ARM based SS level Design verification Must have worked on ARM based SOC viz Cortex A or M series based SOC Experience in Multi-processor based ARM cpu is plus Coresight Debug knowledge coresight is plus. Strong debug skills with AXI/AHB/APB, memory, and NoC components. Strong work experience in AMBA AXI/AHB protocol based NOC , Strong skills/Proficiency in SystemVerilog, UVM Strong work experience (Advanced skills ) in SV-UVM and/or C based verification. Working knowledge in TB/Checker/SB development is plus. Must possess strong SV/UVM debugging Proficiency in C/C++ modelling. Work Experience or Strong knowledge in Memory SS verification - LPDDR5/LPDDR4/DDR protocols or HBM is plus Work experience in PCIe/CXL and other similar complex protocol like Ethernet is plus If interested kindly share your updated CV to irfanai@canvendor.com Please reach out to this number for more details: +91 95855 44407 (message only)

Urgent hiring... Motor Controller 5-12 yrs Bangalore 0-30 Days Skills-Motor Controller Firmware development, BLDC/PMSM/Induction Motors/ Power electronics, Matlab, Simulink , Microcontroller, ARM Cortex, Software / hardware Development

Lead the architecture, design and development of Processor Core Front end of pipeline units for high-performance IBM Systems. - Architect and design I-Cache, Instruction Fetch, Branch Prediction and Decode units of a high performance processor CPU - Develop the features, present the proposed architecture in the High level design discussions - Estimate the overall effort to develop the feature. - Estimate silicon area and wire usage for the feature. - Develop micro-architecture, Design RTL, Collaborate with other Core units, Verification, DFT, Physical design, Timing, FW, SW teams to develop the feature - Signoff the Pre-silicon Design that meets all the functional, area and timing goals - Participate in post silicon lab bring-up and validation of the hardware - Lead a team of engineers, guide and mentor team members, represent as Logic Design Lead in global forums. Required education Bachelor's Degree Preferred education Doctorate Degree Required technical and professional expertise .12 or more years of demonstrated experience in architecting and designing specific CPU unit(eg. I-Cache, Instruction Fetch, Branch Prediction, Instruction Decode) - Hands on experience of different Branch Prediction techniques - Deep expertise in Out of Order, Super Scalar, Multi-Threaded Core Architecture and ISA - Experience with high frequency, instruction pipeline designs - At least 1 generation of Processor Core silicon bring up experience - In depth understanding of industry microprocessor designs (e.g., x86, ARM, or RISC-V processor designs) - Proficiency of RTL design with Verilog or VHDL - Knowledge of at least one object oriented or functional programming language and scripting language. - Nice to haves - Knowledge of instruction decode and handling pipeline hazards - Knowledge of verification principles and coverage - High-level knowledge of Linux operating system - Understanding of Agile development processes - Experience with DevOps design methodologies and tools Preferred technical and professional experience Hiring manager and Recruiter should collaborate to create the relevant verbiage.

Responsibilities: * Develop embedded systems using Arm Cortex processors with TI C2000 and STM32 microcontrollers. * Design, develop, test and maintain embedded software in C/C++/Assembly language. Provident fund Annual bonus

-Proven hands-on experience with FreeRTOS. -Strong background in Embedded Systems Development. Working knowledge of communication protocols: I2C, SPI, UART, BLE, MQTT, Wi-Fi, Experience with Microcontrollers, particularly ARM Cortex