774 Apqp Jobs - Page 2

CREO core box manufacturing process, including cold core box, shell core box, packing core, and PTO core Work closely with engineering teams to integrate design changes for manufacturing feasibility. Required Candidate profile Proficiency in CAD modeling and design for casting patterns. • Experience with foundrycasting processes and techniques. • Knowledge of process/product simulation software (e.g., Magma & Ansys).

You will be responsible for overseeing daily operations in the rubber mixing area to ensure smooth workflow and adherence to production schedules. You will work closely with Production, QA, and R&D teams to drive continuous improvement initiatives. Analyzing mixing cycle times, energy consumption, and material utilization will be essential to enhance operational efficiency. Your role will involve implementing best practices for cost reduction while maintaining high quality standards. It will be crucial to ensure proper maintenance of mixers, mills, and other equipment to minimize downtime. Moreover, you will supervise and mentor operators and technicians in the mixing area, ensuring their compliance with safety protocols and regulatory requirements. You will also prepare reports for senior management and provide improvement strategies. To succeed in this role, you should lead with an outside-in mindset, placing customers at the center of all operations. Upholding Gates ethics and core values will be key to developing talents with the right skills, knowledge, and behavior. Advocating for performance-based rewards will drive accountability for sustainable growth. Additionally, designing a contemporary and innovative learning environment will help attract a diverse talent pool. In terms of supervisory responsibilities, you will have 3+ direct reports and manage a generally homogeneous team. You will adapt plans and set priorities to meet service and operational challenges. Your role will involve performance management and people development responsibilities for managers or associates, as well as providing subject matter guidance to associates, colleagues, and customers. The ideal candidate for this position should have 10-15 years of experience and a strong knowledge of 6-Sigma, policies, and procedures such as kaizens, kanbans, Error-Proofing, TPM, SMED, SPC, 5-S, APQP, and Quality concepts. You should possess expertise in rubber mixing processes, formulations, and materials, along with hands-on experience with internal mixers like Banbury and Kneader, as well as open mills. Strong leadership and team management skills are essential, coupled with problem-solving and process optimization expertise. Familiarity with ISO, IATF, or other relevant quality standards, as well as proficiency in data analysis and production planning tools, will be advantageous for this role.,

The role of Quality Test Assurance (QTA) at our company is not just a job title, but an opportunity to make a meaningful impact on the world. At our company, we prioritize putting People First, both for our employees and our customers. By coming together and continuously seeking ways to improve, we Expand the Possible. If you are someone who is dedicated to personal growth and ready to be a part of revolutionizing the future of transportation, then you are in good company. As a QTA, you will be responsible for demonstrating hands-on experience in ensuring exceptional product quality, delivering customer value that exceeds expectations, maintaining process assurance, conducting quality control, and optimizing the cost of quality. Your expertise will be crucial in meeting world-class quality expectations, resolving issues during assembly and testing, and making decisions that consider both short-term and long-term impacts while keeping the customer in mind. In this role, you will be required to develop a knowledge base, lead quality control and assurance efforts, and collaborate closely with Operations, Manufacturing Engineering, Supplier Quality Engineering, and Materials teams to solve problems and meet quality requirements. Your responsibilities will include working independently to ensure quality during assembly and testing, driving continuous improvement through structured root cause analysis and corrective action, collaborating cross-functionally, utilizing quality control tools, and adhering to processes related to Environmental Health and Safety (EHS) and compliance. The ideal candidate for this role will possess a degree in Electrical or Mechanical Engineering, along with a minimum of 8-12 years of experience in assembly and testing within the Rolling Stock or equivalent industry. Additionally, you should have a strong background in interpreting engineering drawings and specifications, knowledge of assembly processes and quality control tools, exposure to New Product Introduction, Production Part Approval Process (PPAP), and Advanced Product Quality Planning (APQP), as well as excellent interpersonal skills to drive internal and external customer quality requirements. At Wabtec Corporation, we are a global leader in providing equipment, systems, digital solutions, and value-added services for various industries. With a focus on driving progress and delivering innovative transportation solutions, we are committed to embracing diversity and creating an inclusive environment where everyone belongs. We believe that by leveraging the diverse perspectives and experiences of our employees, we can continue to drive exceptional results and make a positive impact on the world. Join us at Wabtec and be part of a culture that values leadership, diversity, and inclusion, where your unique experiences and perspectives are celebrated and contribute to our collective success. Learn more about our company and our commitment to diversity by visiting our website at http://www.WabtecCorp.com.,

As a New Product Development Engineer, you will be responsible for various aspects such as RFQ of new components, tooling design, and methoding to ensure the successful development of new products. Your role will involve coordinating with different teams to ensure the APQP process is followed diligently. Your primary responsibilities will include the development of patterns, dies, jigs, and fixtures while ensuring the dimensional accuracy of new parts. You will also be tasked with identifying opportunities for modification and improvement of existing components, as well as analyzing the impact of design changes on project and process requirements. In this role, you will collaborate closely with casting defect problem-solving teams to identify root causes and implement effective solutions. Proficiency in software such as SolidWorks, NX, or Creo will be essential for this position. This is a full-time, permanent position with benefits such as cell phone reimbursement, health insurance, life insurance, paid sick time, paid time off, and provident fund. The work schedule is during the day shift, and performance bonuses may be provided based on your contributions. If you are passionate about new product development and have a keen eye for detail, we encourage you to apply for this opportunity. The work location for this role is in person, providing you with a collaborative environment to thrive in.,

Job / Skillset requirements: Should have sound product knowledge about Gasoline / Diesel Engine Should have worked on Design and development of engine components at least for a period of 5 years Should have worked on quality improvement and cost reduction initiatives Should have hands on experience in creating and managing BOM and variant engine specifications Should have hands on experience in project planning and co-ordination activities Material and Costing experience is preferred Should be able to lead cross functional teams for cost reduction initiatives Should have very good communication and presentation skills Hands on experience in MS project and Power BI is preferred. Managing Project review meeting with CFT team, record & track review proceedings Lead Product development/localization/VO proposals with engineering, Purchase & Supplier and ensure to meet cost & time targets Develop the Program timing chart & tracking the progress against the plan & control Project time plan

About Us Innovation Sustainability Productivity This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world, From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people and they are possible thanks to people like you If the opportunity to build your skills as part of a collaborative, global team excites you, youre in the right place, Grow a Career Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success And we know innovation cant happen without collaboration So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers, Job Purpose This position will be responsible for Mechanical commodity and will be based at New Delhi Plant, This position will be responsible for ensuring quality and compliance of supplier-produced parts by reviewing and approving Global PPAP submissions in the PPAP module, Key Responsibilities Evaluate submitted Global PPAP documentation and samples from suppliers against the organization's quality requirements and customer specifications, Verify the completeness and accuracy of PPAP package elements, including Design Records, Engineering Change Documents, Process Flow Diagrams, PFMEA, Control Plans, MSA, Dimensional Results, Material Certifications, and Test Results, Utilize the PPAP module/system to review, track, and document the approval status of each suppliers PPAP submission, Approve or reject PPAP submissions based on compliance with quality standards, documenting reasons and feedback for rejections, Experience Required BE / b-tech in Mechanical / Electrical & Electronics 3-10 years experience in handling SQA / SQE in an automotive organization handling Electrical & Electronics parts development Preferred Qualifications BE / b-tech in Mechanical / Electrical & Electronics 3-10 years experience in handling SQA / SQE in an automotive organization handling Electrical & Electronics parts development What We Offer We offer dynamic career opportunities across an international landscape As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect, Benefits At CNH, we understand that the best solutions come from the diverse experiences and skills of our people Here, you will be empowered to grow your career, to follow your passion, and help build a better future To support our employees, we offer regional comprehensive benefits, including: Flexible work arrangements Savings & Retirement benefits Tuition reimbursement Parental leave Adoption assistance Fertility & Family building support Employee Assistance Programs Charitable contribution matching and Volunteer Time Off Show

About Us Innovation Sustainability Productivity This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world, From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people and they are possible thanks to people like you If the opportunity to build your skills as part of a collaborative, global team excites you, youre in the right place, Grow a Career Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success And we know innovation cant happen without collaboration So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers, Job Purpose This position will be responsible for Mechanical commodity and will be based at New Delhi Plant, This position will be responsible for ensuring quality and compliance of supplier-produced parts by reviewing and approving Global PPAP submissions in the PPAP module, Key Responsibilities Evaluate submitted Global PPAP documentation and samples from suppliers against the organizations quality requirements and customer specifications, Verify the completeness and accuracy of PPAP package elements, including Design Records, Engineering Change Documents, Process Flow Diagrams, PFMEA, Control Plans, MSA, Dimensional Results, Material Certifications, and Test Results, Utilize the PPAP module/system to review, track, and document the approval status of each suppliers PPAP submission, Approve or reject PPAP submissions based on compliance with quality standards, documenting reasons and feedback for rejections, Experience Required BE / b-tech in Mechanical / Electrical & Electronics 3-10 years experience in handling SQA / SQE in an automotive organization handling Electrical & Electronics parts development Preferred Qualifications BE / b-tech in Mechanical / Electrical & Electronics 3-10 years experience in handling SQA / SQE in an automotive organization handling Electrical & Electronics parts development What We Offer We offer dynamic career opportunities across an international landscape As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect, Benefits At CNH, we understand that the best solutions come from the diverse experiences and skills of our people Here, you will be empowered to grow your career, to follow your passion, and help build a better future To support our employees, we offer regional comprehensive benefits, including: Flexible work arrangements Savings & Retirement benefits Tuition reimbursement Parental leave Adoption assistance Fertility & Family building support Employee Assistance Programs Charitable contribution matching and Volunteer Time Off Apply now Share This Job Show

ROLE OBJECTIVE The job objective is to ensure compliance with product quality specifications, customer requirements, and process needs during the product and process design phase according NPD Process until the formal product and process release is achieved. RESPONSIBILITIES The AQE team leader will be responsible for leading and managing a team of 4 - 5 advanced quality engineers on the Quality system activities in APQP & PPAP. Understand Customer drawings, technical requirements, Quality requirements, CSR, and cascade the requirements to CFT Exposure to Design and process validation testing, and understanding test specifications AQE engineers are part of the project core team and are the Voice of the customer as well as the interface to other internal departments Hands-on experience in creating and reviewing PPAP documents, such as PFC / PFMEA / DFMEA / Control Plan / Specifications reviews / preparation of control plan / Gauge planning / SPC / MSA Support the FMEA meetings to achieve the quality standard, structure, and content by capturing past failures and lessons learnt Conduct a Pre-PPAP audit, share observations withThe the team, and follow up to close all the open points Leading customer audits and experienced in obtaining PPAP approvals from customers Support Safe Launch for New projects to ensure 0 customer complaints before handing over the project to the manufacturing site Collaboration in introducing and training of new quality and engineering-related software packages, Quality procedures, and systems. AQE team leader will champion the IATF annual surveillance audits for the Engineering function EDUCATION/KNOWLEDGE BE/ B Tech (Mechanical / Production / Automotive Engineering) Knowledge about various phases of Product and Process development ISO/IAFT 16949 requirements for New Product / Process development In-depth knowledge in APQP/PPAP/PFC/PFMEA/DFMEA/Control Plan/SPC/MSA etc Awareness on VDA 6.3 requirements and audit Knowledge in wiring harness, parts having plastic injection molding/metal stamping processes will be an added advantage CRITICAL EXPERIENCE Minimum of 12-15 years of hands-on experience in IATF 16949 (Formerly TS 16949) Quality systems in the Automotive industry Experience in conducting internal audits & facing external audit as per IATF 16949 Quality systems Well-versed and experienced in handling APQP, PPAP activities Leading interaction with customers & suppliers for parts and processes from quality aspects Leading and managing a team of 4 5 AQE Engineers COMPETENCIES Technical capabilities: Expert functional/domain knowledge Strategic agility: Identifying relevant technology trends and opportunities and leveraging TE global technology to increase competitive position and increase value to customers Application Engineering: Ability to understand customer requirements & offer engineering solutions Quality & Reliability Engineering: Ability to understand customer requirements from a quality perspective & cascade internally to achieve First Time Right Building people capability: Training and mentoring engineers with the necessary skill set and improving organizational capability to achieve First Time Right Team management: Effective management of Internal and External stakeholders and team members. Preferred candidate profile

ROLE OBJECTIVE The job objective is to ensure compliance with product quality specifications, customer requirements, and process needs during the product and process design phase according NPD Process until the formal product and process release is achieved. RESPONSIBILITIES Understand Customer drawings, Technical requirements, Quality requirements, CSR, and cascade the requirements to CFT Exposure to Design and process validation testing, and understanding test specifications AQE engineers are part of the project core team and are the Voice of the customer as well as the interface to other internal departments Hands-on experience in creating and reviewing PPAP documents, such as PFC / PFMEA / DFMEA / Control Plan / Specifications reviews / preparation of control plan / Gauge planning / SPC / MSA Support the FMEA meetings to achieve the quality standard, structure, and content by capturing past failures and lessons learnt Conduct a pre-PPAP audit, share observations with the team, and follow up to close all the open points Leading customer audits and experienced in obtaining PPAP approvals from customers Support Safe Launch for New projects to ensure 0 customer complaints before handing over the project to the manufacturing site EDUCATION/KNOWLEDGE BE/ B Tech (Mechanical / Production / Automotive Engineering) Knowledge about various phases of Product and Process development ISO/IAFT 16949 requirements for New Product / Process development In-depth knowledge in APQP/PPAP/PFC/PFMEA/DFMEA/Control Plan/SPC/MSA, etc Awareness of VDA 6.3 requirements and audit Knowledge of wiring harness, parts having plastic injection molding/metal stamping processes will be an added advantage CRITICAL EXPERIENCE Minimum of 2-5 years of hands-on experience in IATF 16949 (Formerly TS 16949) Quality systems in the Automotive industry Experience in conducting internal audits & facing external audit as per IATF 16949 Quality systems Well-versed and experienced in handling APQP, PPAP activities Leading interaction with customers & suppliers for parts and processes from quality aspects Preferred candidate profile

Role & responsibilities: Outline the day-to-day responsibilities for this role. Preferred candidate profile: Specify required role expertise, previous job experience, or relevant certifications.

Manufacturing Process Control: Ensure manufacturing processes follow correct design drawings, tools, materials, and manpower usage as per standards. Quality Systems & Calibration: Maintain and improve company quality systems; ensure availability and calibration of testing and inspection gauges in consultation with superiors. Lean, 5S & Process Improvement: Actively participate in LEAN and 5S activities; work on reducing process cycle time, rework, scrap, rejections, and material handling damages. Design Support & ECR: Recommend engineering changes (ECR) to improve drawing specifications, process capabilities, and reduce production costs. Problem Solving & Corrective Actions: Investigate deviations, customer complaints, and failures using root cause analysis and implement effective corrective & preventive actions. New Product Development & PPAP: Prepare and submit PPAP documentation; coordinate production trials, pre-launch activities, and APQP initiatives. Process & Product Audits: Conduct process audits, maintain inspection control plans and FMEAs; determine process stability using statistical methods (SPC, Cp, Cpk, etc.). Cross-functional Coordination: Collaborate with Sales, Purchase, Engineering, Production & Maintenance to resolve quality concerns and ensure smooth operations. Documentation & Compliance: Manage controlled documents, quality procedures, work instructions, and ensure compliance with ISO 9001:2015 standards. Training, Safety & Team Management: Identify training needs, support team development, assist with 3rd party audits, and enforce safety norms including use of PPE.

Project Role : Financial Planning & Analysis Representa Project Role Description : Drive performance, strategic analysis and identification and correction of financial or operational concerns. Provide financial analysis to aid in decisions pertaining to the profitability and financial health of the organization. Must have skills : SAP FIORI/Gateway architecture Good to have skills : SAP FI S/4HANA AccountingMinimum 12 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Financial Planning & Analysis Representative, you will engage in a dynamic work environment where your primary focus will be on driving performance and conducting strategic analysis. A typical day involves identifying and addressing financial or operational concerns, while providing insightful financial analysis to support decision-making processes that enhance the profitability and overall financial health of the organization. You will collaborate with various teams to ensure that financial strategies align with organizational goals, fostering a culture of continuous improvement and operational excellence. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Analyze financial data to identify trends and provide actionable insights.- Collaborate with cross-functional teams to develop financial strategies that support business objectives. Professional & Technical Skills: - Must To Have Skills: Proficiency in SAP FIORI/Gateway architecture.- Good To Have Skills: Experience with SAP FI S/4HANA Accounting.- Strong understanding of financial modeling and forecasting techniques.- Experience with data analysis tools and methodologies.- Ability to communicate complex financial information clearly and effectively. Additional Information:- The candidate should have minimum 3 years of experience in SAP FIORI/Gateway architecture.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

We are looking for a highly skilled and experienced Assistant or Officer- Purchase to join our team at Gulul Agri International Limited, located in the Beverage industry. The ideal candidate will have 2 to 7 years of experience. Roles and Responsibility Manage and coordinate purchasing activities to ensure timely delivery of goods and services. Develop and implement effective purchasing strategies to achieve cost savings. Build and maintain strong relationships with suppliers and vendors. Conduct market research to identify new suppliers and negotiate contracts. Ensure compliance with company policies and procedures. Analyze data to optimize purchasing processes and improve efficiency. Job Requirements Bachelor's degree in any discipline. Minimum 2 years of experience in purchase or procurement. Possess strong knowledge of purchasing principles and practices. Demonstrate excellent communication and negotiation skills. Ability to work effectively in a fast-paced environment and meet deadlines. Strong analytical and problem-solving skills are required.

Hi All, GE Aerospace is looking for Deputy Manager - Supplier Quality (Electrical) for Pune, Chakan Location. Please share CV on mahalaxmi.rahulghanekar@geaerospace.com Company Overview: Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight. Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defence and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape India’s aerospace ecosystem. Role Overview: Responsible for Supplier development, NC monitoring, tracking and improvement with 8D / RCA with robust qualification & documentation. Responsible for Supplier performance monitoring, process audits & continuous improvement Sound knowledge in ISO 9001 / AS9100 QMS Requirements and application Hands-on experience in new parts development, qualification & controlling Ensuring EHS & Quality compliance at supplier end, on time MRB disposition, collaborate with CFT for resolution Should be aware of Value Stream Mapping , 5S, kaizens, Knowledge sharing, Read across etc. Collaborate with Sourcing, Material to understand requirements & solve problem Responsible for Supplier Deviation request on Supplier discrepancy & working with engineering for disposition. Responsible for Process Change management at supplier end The Ideal Candidate: Candidate should have strong knowledge of ISO/AS9100, FAI, Vendor Development, GD&T and experience in PCB and Electronics/Electrical Components Required Qualification: Minimum Education: B.E Electrical/Electronics/Instrumentation/Mechatronics 5 to 10 years’ experience in Supplier Quality with experience in problem solving, Supplier Quality, Audits, NPI, Supplier performance monitoring & improvement Strong experience of MSA, SPC (Process capability), Quality tool management Preferred Qualifications Hand on experience in PCB and Electronics/Electrical Components Aviation industry quality standard / AS9100 system knowledge Experience in Six Sigma, Lean manufacturing, value stream mapping & APQP will be added advantage Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Designation : Deputy Manager Experience : 5 years ~ 8 years Education : B. Tech - Full-time (Electrical/EE/ EEE) Knowledge of contractor assessment Interaction with 3rd party inspection agencies Monitoring of work done by 3rd party engineers Knowledge of ISO 9001 requirements. Knowledge of preparation and verification of RCA and Corrective actions. Imparting Job specific trainings. Knowledge of the various standards applicable in Solar/Power installations. Knowledge about testing and commissioning. Preparation of Field Quality plans, SOP’s ,Work instructions. Please note: This job requires travel, 3 days to 4 days in a month.

To head and manage Quality function across Suppliers, Processes and Customers. Will handle Quality Assurance Strategy for Supplier / Manufacturing value chain for continuous improvement of Overall Quality Metrics etc.

A Fabrication Quality job focuses on ensuring products meet established quality standards throughout the fabrication process. Location - Chakan, Pune Contact -Miss Maya Ma'am 9767897450

Interested candidates can share your resume at mridula@symbiosisindia.net . Key Responsibilities: Lead the design, development, and validation of electrical & electronic systems for tractor HP platforms. Oversee wiring harness design , system selection, and electrical architecture. Manage product lifecycle from concept, prototype, lab validation to NPIP (New Part Introduction Process). Collaborate with global teams for design reviews and approvals . Drive CAN and non-CAN based system integration and logic development. Implement DFMEA, APQP, PPAP and ensure adherence to quality processes. Troubleshoot field and production issues related to E&E components. Ensure compliance with automotive electronics standards and validation protocols .

Job Description: 1. Customer Communication- Be the key point of contact for customer SQE / purchasing staff with regards to quality matters. Build good relationships with customer contacts 2. Arrange the customer SQE onsite audit 3. Customer Complaints -Ensure that customer complaints are reported and actions are taken in as per plan. Lead 8D activity to ensure good Root Cause analysis and effective corrective / preventive actions. Carry out verification of effectiveness of actions taken 4. Containment Support -When it is necessary organize and lead onsite sorting / inspection of defective product at customers and production site. Plan and execute sorting or rework activity to maximize efficiency in support of customer build plans and minimize cost. 5. Internal Communication - Ensure effective communications with both Operations and Sales staff to ensure that customer complaints, corrective actions or other specific instructions are solved. 6. Process Control Participate in development of FMEAs and Process Control plans to ensure robust process controls are implemented to ensure customer requirements are met, and submit customer approval if there is any change. 7. Manage QA engineer such as KPI, Task monitor, Improvement etc.

Role & responsibilities Quality documentations preparation for forging, machining and heat treatment processes. Preparation of documents such as production control plans, test cards, inspection plans in SAP system, visual inspection planning, work instruction, Standard operating procedures, limiting sample catalogue Responsible for PPAP of initial sample/change management inspection and customer approvals. Responsible for APQP activity related to QM topics. i.e. PFD, FMEA, Measurement feasibility, control plan and inspection equipment planning. Preparation of Internal/external quality audits and IATF 16949 audit, customer audit, SPC, MSA & layout inspection. Customer compliant management and effective use of problem-solving techniques to define efficient measures. Preferred candidate profile 5-10 yrs. of experience in forging and machining DME / BE. Should have customer handling experience

What You'll Do Provide Quality interface and expertise between the plant and its customers to proactively identify or anticipate their needs and expectations and ensure they are understood and satisfied. This includes the complaint management system and the corrective / preventive action process related to customer issues with feedback to the division This position's primary function is of execution in nature. Lead the continuous improvement activities in targeted areas of the organization in support of Total Quality Leadership and the Eaton Business Develop and implement a Customer Quality Organization structure capable of supporting the strategic initiatives of the organization and lead the efforts to integrate Customer Quality needs into the development of short- and long-range strategic business plans for the operation. Responsible for Coordination of Customer Audits / Visits, on time closure of Customer Audit Observations and review with the team Submission of PPAP to Customer and all the documentation required in relation to the Customer PPAP. On Time closure of issues arising of Customer PPAP This position also manages Customer Quality Scorecard and responsible for Measurement, Monitoring, Review and Improvement in Customer Quality Performance on ZMPD, Customer PPM, Customer PPAP's, Warranty, Failure Analysis of Products / complaints on Products coming to plant for ZMPD and Warranty Study, investigate and recommend new or leading-edge technologies, methods, tools and procedures on the fields of Customer Quality and continuous improvement to proactively address changes in the business environment. Execute the initiatives of the organization in the development, implementation and improvement of the appropriate Quality Management Systems throughout the operation, with all the documentation required. This includes providing advanced quality planning support in the development and launch of new products, processes and services. Certified Six Sigma Greenbelt will have added advantage Qualifications Total 5-8 years of experience in Gear/Transmissions Manufacturing Industry Preferably in customer quality Bachelor's degree in mechanical engineering, technical or other related discipline or equivalent Skills Very strong in analysis tools. Knowledge of automotive transmission function & trouble shooting is necessary. Problem solving thru FTA, 8-D using Fishbone and Why-Why analysis, knowledge of Six Sigma preferred. Quality Management System standards (i.e. IATF16949) Core Tools (APQP, PPAP,SPC,MSA,FMEA Understanding of manufacturing technologies and processes Ability to coordinate and support cross-functional process improvement teams. Proven experience as customer quality leader or similar role Excellent communication and interpersonal skills Must be a team player and work well with internal and external customers.

Basic Qualifications and Experience: Education: Bachelor's degree in Mechanical Engineering, Automotive Engineering, Industrial Engineering, Aerospace Engineering, or a similar field. Experience: 6-8 years of manufacturing engineering experience in a low volume, high mix environment. Experience in the aerospace industry is highly desirable; experience in the automotive industry is acceptable. Certifications and Skills: APQP (Advanced Product Quality Planning) Lean Manufacturing / Six Sigma (preferably Green Belt or higher) Strong knowledge in DFMA&T (Design for Manufacturability, Assembly, and Test). Proficient in MS Office, particularly Excel, PowerPoint, and MS Project. Ability to analyze data and make decisions based on statistical data. Additional Qualifications: Communication Skills: Clear and concise verbal and written communication skills to effectively communicate project status, program needs, and technical information across various levels of the organization. Leadership & Influence: Ability to develop leadership skills, influence stakeholders, and drive design and process improvements. Project Management: Intermediate understanding of project management principles with the ability to close initiatives on time and within budget. Problem Solving & Decision Making: Proven ability to resolve technical issues and use influence, persuasion, and negotiation to drive solutions. Aerospace Standards: Knowledge of aerospace quality management systems and industry standards. Fluency in English (both written and spoken). Ability to obtain DFSS Green Belt certification if not already obtained. Key Responsibilities: Manufacturing Engineering & Process Optimization: Design for Manufacturability (DFMA&T): Provide feedback to the engineering team to ensure products are designed with ease of manufacturing, assembly, and test. Product Launch Support: Execute to the program scope, cost, and schedule, ensuring milestones are met. Achieve demonstrated throughput yield of >96% at product launch. Cost Reduction: Drive Design to Cost (DTC) initiatives for New Product Introduction (NPI) programs, including cost estimation and reduction actions to meet UPC targets. Manufacturing Readiness: Support capital planning, test strategy, and capacity analysis for NPI programs, ensuring on-time launch. Manufacturability Issues: Identify and resolve manufacturability issues during initial builds and ensure closure before On-Time Launch (OTL) with stakeholder involvement. Process Improvement and Quality Control: PFMEA/DFMEA Support: Provide PFMEA (Process Failure Mode Effects Analysis) and DFMEA (Design Failure Mode Effects Analysis) inputs and support the program during PDR (Preliminary Design Review) and CDR (Critical Design Review) milestones. Continuous Improvement: Lead the deployment and implementation of continuous improvements across manufacturing processes, using Lean and Six Sigma methodologies. Cost Drivers & Automation: Identify key cost drivers and recommend opportunities for automation, digitization, and alternative manufacturing solutions to improve efficiency. Statistical Data Analysis: Utilize Six Sigma tools and statistical data (e.g., RTY, First Pass Yield) to improve product quality, delivery performance, and overall manufacturing efficiency. Customer and Supplier Coordination: Supplier & Customer Communication: Support communication between suppliers and customers to ensure product quality and timely delivery. Cross-Department Coordination: Coordinate with Engineering, Sourcing, Program Managers, and suppliers to ensure schedules are met with the right quality and technical requirements. Manufacturing Methodology & Material Knowledge: Engineering Practices: Understand and apply engineering principles related to the manufacture of aerospace products, including customer and industry standards. Manufacturing Processes: Good knowledge in machining, metal forming, joining, and assembly processes. Materials Knowledge: Familiar with aerospace materials used in manufacturing processes like machining, metal forming, and joining. Special Processes: Understanding of special processes such as heat treatment, chemical processing, and their application in aerospace manufacturing. Skills Requirement: Mechanical Manufacturing Methodologies: Knowledge of machining, metal forming, joining, and assembly processes, specifically in the aerospace industry. Technical Documentation: Ability to read and interpret engineering drawings, manufacturing operations, tooling sheets (MOTs), work instructions, and inspection requirements. Tool & Fixture Design: Good knowledge of tool design, including jigs, fixtures, and inspection gauges. Quality Standards: Strong knowledge of aerospace quality management systems and standards. APQP Knowledge: Understanding of APQP requirements including PFD (Process Flow Diagram), FMEA, CP (Control Plan), MSA (Measurement Systems Analysis), SPC (Statistical Process Control). Project Management Tools: Proficiency in project management tools like MS Project for managing timelines and resources effectively. Compensation & Benefits: Competitive Salary and performance-based incentives. Health Benefits, including insurance coverage. Retirement Plans and other benefits. Professional Development opportunities including Six Sigma certification and training.

Responsibilities: Lead quality initiatives, drive continuous improvement. Ensure compliance with IATF & ISO standards, implement QMS. Conduct customer audits, PFMEAs, APQPs, Kaizens.

Role & responsibilities Position Sr. Exe. / AM- Quality (QMS* Industry automotive *Email jobpune2025@gmail.com * *Location Pune chakan Bhamboli* *Contact -9356395439* *Experience* - 5 to 8 yr. *Qualification* BE / Diploma *CTC- 6-8 LPA* Job Profile – 1. Knowledge of Quality Standards, 2. Internal and external audit planning, execution, and reporting 3. Ability to perform risk assessments. 4. Knowledge of preventive and corrective action processes 5. *Six Sigma, Lean, Kaizen, 5S, PDCA* , root cause analysis 6. Mastery of document management systems 7. Knowledge of change control procedures.

You are required to have a strong background in ring plant quality operations with hands-on experience in implementing quality control systems and resolving product quality issues. Your key responsibilities will include ensuring quality control for manufacturing and outgoing processes in the piston ring plant, implementing and maintaining quality systems such as PPAP, MSA, SPC, APQP, monitoring and analyzing production quality data, leading audits and inspections for continuous improvement, coordinating with production and R&D teams to resolve quality-related issues, developing and maintaining standard operating procedures and quality documentation, as well as training operators and junior staff on quality standards and best practices. To qualify for this position, you must hold a B.Tech / Diploma in Mechanical Engineering with 10-15 years of relevant experience in the auto component industry, preferably in piston and piston ring manufacturing. You should have in-depth knowledge of piston ring manufacturing processes and quality control, a strong command of quality tools like PPAP, MSA, SPC, APQP, and practical experience in handling quality-related issues and customer complaints. An analytical mindset with a problem-solving approach will be beneficial in this role. The job type is full-time and permanent, with benefits including cell phone reimbursement and provident fund. The work location is in person at Ghaziabad. If you meet the qualifications and skills required for this position, please contact 9916086641.,