18 Analog Circuits Jobs

Responsibilities: Collaborate with engineers on new projects Conduct maintenance operations Design, test & maintain electronic systems using oscilloscopes, microcontrollers & PCB design software Annual bonus

About the job: Key responsibilities: 1. Understand schematics, HW design rules, PCB Layout guidelines, power dissipation calculations, etc., accurately and design pcb independently. 2. Create and generate documentation that includes a bill of materials, fabrication and assembly process, test procedures, technical documentation, and other documents to help release the design to production. Provide all necessary data/documents for proto-, pre-, and final-release. 3. Work on being involved in the prototype debug and testing efforts in order to fully validate the design. Who can apply: Only those candidates can apply who: have minimum 1 years of experience are Electronics Engineering students Salary: ₹ 2,40,000 - 3,50,000 /year Experience: 1 year(s) Deadline: 2025-07-07 23:59:59 Skills required: PCB Design, Internet of Things (IoT), Digital Circuits and Analog Circuits Other Requirements: 1. B. Tech/BE/Diploma in electronics & communication engineering/electrical engineering. 2. 1 year of PCB designing experience. 3. Proficient in designing single-layer, double-layer, and multilayer PCBs using Altium software. 4. Hands-on experience in building quality design for manufacturability (DFM) PCB designs. 5. Thorough understanding of schematics, HW design rules, PCB Layout guidelines, Power dissipation calculations, etc. 6. Working knowledge of analog, digital, mixed signal circuits & high-speed designing. An understanding of EMI/EMC compatibility is preferred. Previous experience in PCB designing, including IoT components such as modules/ICs of Wifi, Bluetooth, GSM, and Zigbee, is preferred. Excellent logical reasoning and communication skills. 7. We are looking for candidates who have exposure to the complete product development life cycle and who have completed at least one project independently. About Company: IoTfy is a New Delhi-based IoT technology company developing technology products and custom solutions for its clients in India and abroad. Here at IoTfy, we work on IoT, hardware, cloud, and mobile technologies. IoTfy's customers include companies with interests in domains such as consumer electronics, appliances, industrial, automobiles, etc. IoTfy provides its employees with an excellent learning environment and exposure to the full product development life cycle and a wide range of technologies and domains. The office is located in D-21 Corporate Park, Sector 21, Dwarka, New Delhi. (Walking from Dwarka Sector 8 Metro Station).

The Hardware Engineer Intern will assist in schematic design, prototyping, validation, and debugging, working closely with senior engineers to support hardware development and ensure timely delivery of reliable and high-quality solutions.

RF Designer- Lead As an RF designer, you will be designing and developing the RF hardware modules for the RF Coils sub system of MR products, for hospital and outpatient radiology facilities. Together with other electronic hardware designers (RF, analog, digital and mixed signal), mechanical engineers, system engineering, manufacturing, and service engineers you will take products from concept through design into production to meet our customers needs. If you're passionate about healthcare innovation and cutting-edge technology, this is your chance to make a meaningful impact. Your role: You will be responsible for the design (models, schematics, and layout), realization, integration, and verification of analog and RF components of the MRI systems. Contribute to the electronic design and development of analog circuits including RF circuits, PCB schematics, layout plans, wiring drawings, and assembling. Assemble, configure, repair, and connect electronic systems and devices. Debug and characterize complex electronic circuits using standard test and measurement equipment (oscilloscopes, spectrum analyzers, network analyzers). The present result, root cause analysis to a broader audience and drive for best possible performance of RF Front End. Support on various technical aspects of regulatory compliance. Participation in the activity of verification and validation for the design process Actively participate in cost saving opportunities, design maintenance and solving end-of-life issues. Document development efforts for subsystem component and module, including requirements, specifications, design plans, reviews, test procedures and test reports. Coordinate, support, and execute product tests to provide a traceable verification of the product. Work Experience You're the right fit if: You hold a bachelors or masters degree in electrical or electronics engineering specialized in RF Circuit design. 8-12 years of experience in RF hardware development, preferably in a (safety) regulated industry such as medical devices, gas appliances and aviation equipment. Solid understanding of RF concepts such as impedance matching, impedance transformation, distributed systems, passive RLC and resonant circuits, noise, linearity, bandwidth, and stability from tens of kHz to a few Mhz. Familiar with lab instruments including Network Analyzers, Spectrum Analyzers, Signal Generators, RF Probe Stations, Noise Figure Analyzers Strong lab skills in data collection & analysis, lab debugging & tuning, and product troubleshooting Familiarity with various component blocks inside the RF transceiver lines, including coils, tuning and matching circuits, LNA, upconverters/downconverters, baseband filters, driver amplifiers/power amplifiers, linear RF switches, attenuators, low noise regulators, amplifiers, transimpedance amplifier, and biasing circuits. A self-starter and team player with a strong desire to learn on the job. Strong desire and commitment to take product from concept to volume production You have outstanding communication skills, are highly motivated and a good team player.

Electronic Hardware Designer As an electronic hardware designer, you will be designing and developing the hardware for the control and acquisition system of MR products, for hospital and outpatient radiology facilities. Together with other electronic hardware designers (RF, analog, digital and mixed signal), mechanical engineers, system engineering, manufacturing, and service engineers you will take products from concept through design into production to meet our customers needs. If you're passionate about healthcare innovation and cutting-edge technology, this is your chance to make a meaningful impact. Your role: You will be responsible for the design (models, schematics, and layout), realization, integration, and verification of analog and digital hardware components of the MRI systems. Deliver high quality hardware design starting from requirements till introduction in the factory, end to end. Actively participate in cost saving opportunities, design maintenance and solving end-of-life issues. Document development efforts for subsystem component and module, including requirements, specifications, design plans, reviews, test procedures and test reports. Coordinate, support, and execute product tests to provide a traceable verification of the product. Work Experience You're the right fit if: You hold a bachelors or masters degree in electrical or electronics engineering. 4-8 years of experience in electronic hardware development, preferably in a (safety) regulated industry (medical devices). You have experience with Electronic hardware design: analog- and mixed signal board design, power electronics design, communication interfaces, high speed digital interfaces, low noise RF signals, and PCB design tools (e.g. Cadence / Mentor Graphics). Electronic design simulation: SPICE based simulators, Advanced Design System, Microwave Office, Matlab, Ruby, Python. Electronic design practices: design for manufacturability and reliability, EMI/EMC standards, and design for six sigma. You have outstanding communication skills, are highly motivated and a good team player.

About the job: Key responsibilities: 1. Design and develop embedded hardware and firmware for battery diagnostic instruments and test systems 2. Work with high-end lab instruments for measurements and data acquisition 3. Integrate precision measurement circuits and sensors for electrical, thermal, and electrochemical parameter monitoring (voltage, current, temperature, impedance) 4. Develop battery characterization tools using techniques such as OCV-SOC mapping, DCIR, EIS (Electrochemical Impedance Spectroscopy), and SoH estimation 5. Implement embedded communication protocols (e.g., CAN, UART, RS485, SPI, I2C) for data acquisition and system integration 6. Collaborate with data science teams to ensure seamless integration of battery test instruments with higher-level analytics platforms 7. Develop and validate algorithms for SoH and SoC estimation implemented on embedded platforms 8. Lead prototype development, hardware validation, and field testing of diagnostic equipment Who can apply: Only those candidates can apply who: are Electronics Engineering students Salary: ₹ 5,00,000 - 8,00,000 /year Experience: 0 year(s) Deadline: 2025-06-18 23:59:59 Skills required: MATLAB, Python, Raspberry Pi, Embedded Systems, Arduino, Circuit Design, C Programming, C++ Programming, PCB Soldering, Battery Pack Testing, Battery Management Systems, Digital Circuits and Analog Circuits Other Requirements: 1. Bachelor’s or master’s degree in electrical engineering, electronics or computer science 2. Strong programming skills (Python, MATLAB, embedded C) 3. Familiar with battery characterization equipment (Cell Cycler, Pack Cycler, Thermal chamber, Impedance Analyser, etc.) 4. Foundational knowledge about Li-Ion Battery (cell, pack, BMS, Equivalent circuit modeling, etc.) 5. Experience in battery cell and pack characterization techniques (OCV curves, DCIR, cycle life testing, EIS) About Company: ThinkClock Battery Labs is an R&D-driven company focused on battery health analytics using spectroscopy techniques, namely EIS (electrochemical impedance spectroscopy), acoustic, and RF spectroscopy. We reveal the diagnostic insight about the battery health while relating the microscopic data of the battery to the observable system-level behavior with the help of the models based on physics and machine learning. ThinkClock offers lab-based battery characterization services (for performance and uniformity assessment) to cell OEMs and battery pack manufacturers. We are creating a cell benchmarking database for the commercially available cells using the lab-based characterization data to provide an independent source of truth for the system integrators. While leveraging our cell benchmarking database, we have developed a portable tool, CellScope, which can quickly assess the health of a cell using spectroscopic techniques.

Job Overview TE Connectivitys R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise include: materials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Responsibilities Lead product design and development for active embedded projects, including end-to-end hardware prototyping, testing, and Design for Manufacturability (DFM) for High-Speed Communication Cable products aimed for Global market. Design and Develop Digital and Analog circuits, simulate, PCB Design for active embedded projects and participate in software development and testing for production environments and end-user software. Provide sustaining and application support for modules and chipsets, including firmware updates, design modifications, End-of-Life (EOL) part transitions, customer design reviews, and architecture development. Serve as liaison between Business Development, Marketing, Sales, Procurement, Manufacturing, contract design teams, customers, suppliers, and various other Engineering functions Generation of product drawings, application specifications, and instruction sheets Perform/coordinate failure analysis work and determine corrective actions Initiation of Engineering Changes to improve designs, improve manufacturing, or respond to changes requested by the customer Collaborate with customers through design reviews, application development, and technical query resolution for products. Manage product certification and documentation to ensure compliance with agency standards Regularly keep management informed of problems, issues, and status of on-going projects. Work with local and global counterpart / stake holder for ensuring quality deliverable and project execution. Work closely with third party vendor / supplier to define the technical requirements for the product and project execution. Perform high-speed hardware testing using equipment such as Digital Sampling Oscilloscopes, Vector Network Analyzers (VNAs), Bit Error Rate Testers (BERTs), TDRs, and Pattern Generators. Analyze board-level electrical performance, including signal integrity, power integrity, and thermal performance. Mentor the new team members on design and development of opto-electronics products. Manage Electronics Lab and safety compliance. Lead product design and development for active embedded projects, including end-to-end hardware prototyping, testing, and Design for Manufacturability (DFM) for High-Speed Communication Cable products aimed for Global market. Design and Develop Digital and Analog circuits, simulate, PCB Design for active embedded projects and participate in software development and testing for production environments and end-user software. Provide sustaining and application support for modules and chipsets, including firmware updates, design modifications, End-of-Life (EOL) part transitions, customer design reviews, and architecture development. Serve as liaison between Business Development, Marketing, Sales, Procurement, Manufacturing, contract design teams, customers, suppliers, and various other Engineering functions Generation of product drawings, application specifications, and instruction sheets Perform/coordinate failure analysis work and determine corrective actions Initiation of Engineering Changes to improve designs, improve manufacturing, or respond to changes requested by the customer Collaborate with customers through design reviews, application development, and technical query resolution for products. Manage product certification and documentation to ensure compliance with agency standards Regularly keep management informed of problems, issues, and status of on-going projects. Work with local and global counterpart / stake holder for ensuring quality deliverable and project execution. Work closely with third party vendor / supplier to define the technical requirements for the product and project execution. Perform high-speed hardware testing using equipment such as Digital Sampling Oscilloscopes, Vector Network Analyzers (VNAs), Bit Error Rate Testers (BERTs), TDRs, and Pattern Generators. Analyze board-level electrical performance, including signal integrity, power integrity, and thermal performance. Mentor the new team members on design and development of opto-electronics products. Manage Electronics Lab and safety compliance. What your background should look like: Bachelors degree in electrical engineering or relevant field 5+ years experience with Hardware development and design Proven experience in digital, Analog & High Speed Communication circuit design, prototyping, testing, and DFM principles. Strong skills in HW development, Highspeed circuit design, schematics, PCB layout. Familiarity with signal conditioning techniques (e.g., equalization, amplification). Understanding of high-speed protocols and modulation techniques, such as PAM4/8. Basic programming knowledge (Python, C) for test processes. Strong understanding of signal integrity, power integrity, and hardware debugging techniques. Experience with embedded firmware design, development, and revision testing. Experience with ICs such as Digital Signal Processor, 32Bit Microcontroller (STM32), Memory devices. Knowledge of RF performance testing and analysis. Experience with EMI & EMC, qualification processes and FCC CE certifications. Familiar with communication protocol such as Ethernet, PCIe, SPI, UART, I2C Experience with schematic capture and simulation tools such as PSpice. Strong hands-on experience with test and measurement instruments such as Digital Sampling Oscilloscope, Vector Network Analyzer, Bit Error Rate Tester, TDR, Pattern Generators, Power Supplies. Knowledge of active antenna design principles and testing methods. Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork

Job Requirement: We are looking to hire engineers with 5 to 10 years of experience in Analog circuit design. Candidate needs to have comprehensive knowledge of Analog design with experience in some blocks like OpAmps, Comparators, Bandgap References, LC and ring oscillator, PLLs, CDR, LDO, Tx/Rx etc Should have understanding of process technologies and device behaviour and reliability issues, ESD and latchup Should have understanding of various aspects of signal integrity. Experience in Rx, Tx, T-coil ESD, CDR, equalization techniques like CTLE/DFE in PCIE or Ethernet is preferred. Strong documentation skills and collaborative attitude are must haves

Job Location: Chennai Skills Required : Hands on experience in HW Circuit design and development ( Automotive ECU) Schematic, Design justification, circuit simulation , worst case analysis, Derating , thermal analysis and component selection. Design Failure mode effect analysis ( DFMEA) , FTA Strong Technical Knowledge in small signal electronics (analog and digital) ( Opamp, MOSFET, BJT) knowledge on automotive electronics technology, test standards and processes Hands-on with Automotive ECU components selection and validation,. Power supply topologies - Linear, LDOs, DC-DC switching power supplies (Buck, Boost, Buck-Boost) Micro controllers and Digital circuit boards with communication protocols –I2C, SPI, LIN, CAN Memory Interfaces: EEPROM, Flash and DDR memories EMI/EMC design guidelines and knowledge on Environmental Reliability test. Knowledge on components obsolescence/shortage analysis Job description: Identify quality risks for projects and participate in the construction of the Hardware Quality Assurance Plan (KARTE) Conduct quality assurance activities on Hardware (ECU), particularly on semiconductor Components, Circuit Design review and Environment review. To perform the Design Review on the electronic schematics like circuit design review and component design review during development and serial phase. To provide a support to solve the Hardware problems during development and serial phases and to capitalize on the defect’s history for internal rules. Interested, Kindly share your profile to rafik_raja@onwardgroup.com Regards, Rafik Raja S Onward Technologies.

About The Role Designs, develops, and builds analog circuits in advanced process nodes for analog and mixed signal IPs.Designs floorplans, performs circuit design, extracts chip parameters, and simulates analog behavior models.Creates test plans to verify design according to circuit and block microarchitecture specifications and evaluates test results.Verifies functionality to optimize circuit for power, performance, area, timing, and yield goals.Collaborates cross functionally to report design progress and collects, tracks, and resolves any performance and circuit design issues.Optimizes performance, power, area, and reduces leakage of circuits. Works with architecture and layout team to design circuit for best functionality, robustness, and electrical capabilities. Qualifications Qualifications:B.Tech with 3+ years or M.Tech with 2+ Years of hands-on experience in high-speed analog circuit design, with a proven track record of successful projects.Expertise in designing and verifying analog circuits such as High-speed transmitter, recevier, amplifiers, PLLs, voltage regulators, and data converters.Proficiency in using EDA tools like Cadence Virtuoso, SPICE, or Synopsys. Inside this Business Group The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them. As the largest business unit at Intel, CCG is investing more heavily in the PC, ramping its capabilities even more aggressively, and designing the PC experience even more deliberately, including delivering a predictable cadence of leadership products. As a result, we are able to fuel innovation across Intel, providing an important source of IP and scale, as well as help the company deliver on its purpose of enriching the lives of every person on earth.

Hardware Design Engineer Name:Hardware DesignEngineer Role:Design Engineer Industry:Manufacturer Location:Udaipur (Rajasthan)Job Type:Full Time Experience:1- 4yearsSkills:PCB design, Orcad / Altium, circuit design Salary:Best in the industry Education:BTech/Diploma(Electronics/ Electrical) Description: Knowledge of electronic circuit design i.e. Memory interface circuits / Digital circuits. communication circuits/analog circuits. Knowledge of hardware-level development, schematic & PCB design tools like Orcad / Altium, etc. Technical assistance for component specification and selection. Working knowledge of C and assembly coding will be an added advantage. Meeting with design and engineering teams to determine hardware requirements. Designing and developing components such as printed circuit boards (PCB), processors, memory modules, and network components. Collaborating with software engineers to ensure software compatibility and integration with the hardware components. Testing hardware prototypes, analyzing and interpreting performance data, and generating analytic and performance reports for presentation and revision.

Desire Engineer Role and Responsibilities Circuit designing and circuit analysis based on the product requirement. Component selection/alternative to building low cost BOM. Designing component library, schematic and PCB layout using Altium Designer software. Working with Senior Engineer in building the hardware architecture of the product. Planning testing of the hardware board and test bench for the system testing. Creating design document, test procedure document and test reports. Desired Engineer Profile Experienced in hardware designing of industrial and automotive products. Experienced in hardware design and development of board for 32-bit MCU and its peripherals for embedded systems. Must have Strong knowledge of Analog circuits, digital circuits, and mixed circuits. Experience in power circuit designing is added advantage. Strong design and hardware troubleshooting skills, including debugging, performance analysis, and test design. Experienced in EMC/EMI circuit calculation, analysis, and implementation will be added advantage. Experienced in Altium Designer software for schematic building, component library creation and PCB layout designing along with strong knowledge of PCB layout guidelines and standards used for PCB designing. Experience in multi-layer pcb designing for high-speed boards, mixed-signal board and power boards. Understanding of Signal Integrity and Power Integrity. Should have experience in any circuit simulation tools like Pspice, LTspice or equivalent. Perform component selection keeping in consideration of optimized cost / EOL and applicable compliance for NPDs. Hardware design document, BOM, create test reports is a must. Need to have experience in soldering leaded and smd components. Experience in DFM and DFT

Responsibilities will include, but are not limited to: Design, implementation, and improvement of Complex Analog Circuits such as CMOS Amplifiers, Comparators, Bandgap references, V2I converters, LDOs, charge pumps, Oscillators, DLL, IO circuits (DDR/LPDDR), Delays, Process and temperature sensors in advanced semiconductor process nodes for advanced DRAM products Integration of modules with Power delivery network and propose design solution for optimum performance Driving innovation into the future Memory generations within a dynamic work environment Validate & optimize design for reliability (Device stress, Aging effect) EM/IR simulation, optimize layout to achieve best circuit performance Custom digital circuit design & validation Parasitic modeling and assisting in design validation, reticle experiments and required tape-out revisions Overseeing and managing the layout process including floor-planning, placement, and routing Performing verification processes with modeling and simulation using industry standard simulators Contributing to cross group communication to work towards standardization and group success Working with Marketing, Probe, Assembly, Test, Process Integration, and Product Engineering groups to ensure accurate manufacturability of product Proactively solicit guidance from Standards, CAD, modeling, and verification groups to improve the design quality Performs semiconductor design engineering assignments including engineering and designing chip layout circuits, circuit checking, documenting specifications, modifying, and evaluating semiconductor devices and components. Reviews product requirements and logic diagrams for device definition. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor devices and components.

Experience in Digital & Analog circuits. Know-how of product development life cycle, design for manufacturing. Evaluation of customer requirements to derive hardware level requirements & architecture for Electronic Control Unit and sensors. Experience in Hardware design of Sensor and HMI products. Co-ordination with internal/external stakeholders Knowledge of components selections/design, BOM preparation, thermal calculations, and spice simulations. Experience in board bring-up, testing and troubleshooting the electronic circuits. Ability to perform independent Test & Measurement activities using Oscilloscope, Power Supply, Multimeter, Logic Analyzer etc. Experience in hardware development for automotive applications which includes requirement analysis, circuit design, worst-case analysis and simulation. Basic understanding FMEA and FMEDA on ECUs or other electronic circuitry. Co-ordination with Module developer, Schematic Developer and Layouter. Preparing documents like HDD, test plan, test report etc. Hands-on experience with engineering tools like eADM (desired) Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications. 1. Applies scientific methods to analyse and solve software engineering problems. 2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance. 3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers. 4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities. 5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Skills (competencies) Verbal Communication

Designs, develops, and builds analog circuits in advanced process nodes for analog and mixedsignal IPs. Designs floorplans, performs circuit design, extracts chip parameters, and simulates analog behavior models. Creates test plans to verify design according to circuit and block microarchitecture specifications and evaluates test results. Verifies functionality to optimize circuit for power, performance, area, timing, and yield goals. Collaborates cross functionally to report design progress and collects, tracks, and resolves any performance and circuit design issues. Optimizes performance, power, area, and reduces leakage of circuits. Works with architecture and layout team to design circuit for best functionality, robustness, and electrical capabilities. Qualifications B.Tech / M.Tech/ Phd with with 3+ hands-on experience in high-speed analog circuit design, with a proven track record of successful projects. Expertise in designing and verifying analog circuits such as High-speed transmitter, recevier, amplifiers, PLLs, voltage regulators, and data converters. Proficiency in using EDA tools like Cadence Virtuoso, SPICE, or Synopsys.

About Us Unitedlex India Pvt. Ltd. (Formerly known as iRunway India Pvt Ltd) is a data and professional services company delivering outcomes for high-performing law firms and corporate legal departments in the areas of digital litigation, intellectual property, contracts, compliance, and legal operations. Founded in 2006 with a mission to push the boundaries of legal innovation, we provide solutions that enable measurable performance improvement, risk mitigation, revenue gain, cost reduction, and digital business synergy. Job location : Gurgaon or Bangalore Shift timing : 10:30 AM 7:30 PM Work Mode : Work from Office Must have/Eligibility criteria BE/ME in Electrical or Electronics or related technical field. Masters degree preferred At least 3 years of relevant experience in semiconductor product development. First-hand knowledge in System Design and/or Packaging Experience. First-hand knowledge of semiconductor manufacturing processes (design, process, fabrication, assembly, testing). Candidate should demonstrate interpersonal communication (including verbal and written communication), creative problem solving, time management, and team building skills. we look for a person who is curious enough to take a deep dive into a new and latest technology to explore anything anytime. Good to have/key differentiators (expertise in any of the following fields)- Expertise in Semiconductor packaging Expertise in semiconductor process and fabrication Expertise in designing any high-speed IO and SERDES architecture Experience in analog circuits including power management circuits such as converters, regulators; clock generators such as Crystal Oscillator, RC Oscillator, PLL, clock buffers and dividers, etc. Have good knowledge on The JEDEC memory specifications for semiconductor memory circuits and similar storage devices. Do you have any PCB or card or module layout experience? What layout tools have you use if any? (Example: Cadence, Mentor Graphics, OrCAD Any Previous work experience with CMOS image sensors Please refer to our Privacy Policy at UnitedLex for information, https://unitedlex.com/privacy-policy/

About The Role : Designs, develops, and builds analog circuits in advanced process nodes for analog and mixed signal IPs. Designs floorplans, performs circuit design, extracts chip parameters, and simulates analog behavior models. Creates test plans to verify design according to circuit and block microarchitecture specifications and evaluates test results. Verifies functionality to optimize circuit for power, performance, area, timing, and yield goals. Collaborates cross functionally to report design progress and collects, tracks, and resolves any performance and circuit design issues. Optimizes performance, power, area, and reduces leakage of circuits. Works with architecture and layout team to design circuit for best functionality, robustness, and electrical capabilities. Qualifications Qualifications: B.Tech 7+ years & M.Tech 5+ years or PhD having hands-on experience in high-speed analog circuit design, with a proven track record of successful projects. Expertise in designing and verifying analog circuits such as High-speed transmitter, receiver, amplifiers, PLLs, voltage regulators, and data converters. Proficiency in using EDA tools like Cadence Virtuoso, SPICE, or Synopsys. Inside this Business Group The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them. As the largest business unit at Intel, CCG is investing more heavily in the PC, ramping its capabilities even more aggressively, and designing the PC experience even more deliberately, including delivering a predictable cadence of leadership products. As a result, we are able to fuel innovation across Intel, providing an important source of IP and scale, as well as help the company deliver on its purpose of enriching the lives of every person on earth. Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits It has come to our notice that some people have received fake job interview letters ostensibly issued by Intel, inviting them to attend interviews in Intels offices for various positions and further requiring them to deposit money to be eligible for the interviews. We wish to bring to your notice that these letters are not issued by Intel or any of its authorized representatives. Hiring at Intel is based purely on merit and Intel does not ask or require candidates to deposit any money. We would urge people interested in working for Intel, to apply directly at https://jobs.intel.com/ and not fall prey to unscrupulous elements.

Role & responsibilities Quality control Inspections, electronics and mechanical components Inspection, Inward material inspection, Electronics testing, Field visits, BOM making. Preferred candidate profile