88 Ais Jobs - Page 3

Prepare and manage technical documentation for certification purposes. Coordinate with internal teams for data collection, validation, and formatting. Ensure timely and accurate submissions as per client/regulatory requirements.

Key Responsibilities: 1 Switchyard Operation & Monitoring: Perform routine monitoring of all switchyard equipment (Transformers, Circuit Breakers, CTs, PTs, Isolators, Reactors, Busbars, etc.). Execute switching operations for energization/de-energization of transmission lines, transformers, and other equipment as per the Load Dispatch Center (LDC) schedule. Ensure voltage, frequency, and load parameters remain within permissible limits. Operate GIS (Gas-Insulated Switchgear) & AIS (Air-Insulated Switchgear) substations . 2 Fault Handling & Emergency Response: Detect and analyze faults, tripping events, and abnormal conditions in switchyard operations. Coordinate with Grid Operators (SLDC/RLDC/NLDC) and Maintenance teams for fault rectification. Respond to blackouts, grid disturbances, or equipment failures and take corrective actions. Maintain proper switching sequence & safety procedures during emergency restoration. 3 SCADA & Substation Automation: Monitor real-time power flow, alarms, and event logs using SCADA/HMI systems. Perform remote/local operation of switchgear, isolators, and circuit breakers . Troubleshoot SCADA communication issues and coordinate with the automation team . 4 Permit to Work (PTW) & Safety Compliance: Issue and verify Permit to Work (PTW), Lockout-Tagout (LOTO) procedures for maintenance activities. Ensure adherence to safety protocols, grounding procedures, and electrical isolation procedures . Conduct safety checks before and after maintenance work on equipment. 5 Reporting & Documentation: Maintain shift logs, event reports, switching operation records, and relay tripping reports . Record voltage, current, frequency, and load conditions in daily shift reports. Generate reports on load flow, transformer loading, reactive power compensation, and outage analysis . Technical Knowledge: Switchyard Equipment Operation (400kV/220kV/132kV Transformers, CBs, CTs, PTs, Reactors, etc.) Switching & Interlocking Procedures, Load Dispatch Coordination SCADA, HMI, RTU, and Substation Automation (IEC 61850, MODBUS, DNP3) Grid Code Compliance & Permit to Work (PTW) Procedures Fault Handling, Tripping Analysis, and Protection Relay Coordination Certifications: Electrical Safety, Grid Operation & Power System Protection (Preferred). Software Skills: SCADA/HMI Operation, Siemens DIGSI, GE EnerVista, MiCOM S1 Agile. Key Traits: Attention to detail, quick decision-making, troubleshooting expertise, and shift flexibility . Preferred Experience In: Shift Operations in 400kV Switchyards / Substations GIS & AIS Substation Equipment Operation Grid Synchronization & Load Flow Management Emergency Handling & Fault Response Coordination SCADA & Substation Automation Systems

Role & responsibilities Switchyard Electrical Erection: Execute the installation and alignment of switchyard equipment, including power and distribution transformers, insulators, isolators, CTs, PTs, GIS (Gas-Insulated Switchgear), and circuit breakers. Supervise erection of electrical equipment in 400kV and 220kV switchyards, ensuring adherence to project plans and technical specifications. Erection of power and distribution transformers, insulators, isolators, CTs (Current Transformers), and PTs (Potential Transformers). 2. Relay, Testing, and Commissioning: Relay protection, Auto re-closer, and SCADA system integration for high-voltage systems. Troubleshooting of all electrical circuits, controls, and protection circuits. Conduct testing and commissioning of HT (High Tension) and LT (Low Tension) motors, transformers, circuit breakers, CTs, PTs, CVTs, and reactors. Perform interlock, synchronization, and functional checks for GIS bays up to 400kV. Testing and commissioning of all electrical equipment at various voltage levels, including DG load tests and FFPH systems. Conduct testing and commissioning of power and distribution transformers. Relay testing, troubleshooting, and calibration. Circuit breaker testing and validation, including mechanical and electrical performance checks. 3. Project Execution: Lead project execution from the installation phase to handover, coordinating with teams and ensuring safety and quality standards are maintained. Testing of CTs (Current Transformers), PTs (Potential Transformers), breakers, bus bar CRM (Contact Resistance Measurement), transformer testing, REF (Restricted Earth Fault) and SEF (Sensitive Earth Fault) protection, and cable Hi-pot testing. Perform power transformer testing, ICT (Interconnecting Transformer) testing, reactor testing, and motor no-load testing. Oversee electrical execution from planning to handover in compliance with project specifications. Coordinate with contractors, vendors, and clients to ensure smooth project execution. Ensure adherence to safety standards and regulatory compliance during the execution phase. 4. Quality Assurance and Documentation: Ensure compliance with industry standards for electrical testing and commissioning, ensuring all equipment functions as per design. Document all testing, commissioning, and troubleshooting activities, including results and reports for future reference. 5. Documentation and Reporting: Prepare testing and commissioning reports, technical documentation, and project completion certificates. Maintain detailed records of all tests, results, and commissioning data for future reference. Preferred candidate profile 5+ years of experience in 220kV and 400kV switchyard erection, testing, and commissioning. Expertise in relay protection, Auto re-closers, SCADA systems, and electrical equipment testing. Knowledge of high-voltage systems and standards, including CT, PT, transformer testing, and circuit breaker testing. Proficiency with testing and commissioning tools for high-voltage systems. Strong troubleshooting and problem-solving skills for electrical circuits and protection systems. Ability to work under tight deadlines while managing complex projects. Excellent communication and teamwork skills.

Prepare timely and comprehensive pre-bid documentation presentations. Determine most technical appropriate and cost-effective solutions. Customer satisfaction improvement. Experience and skill to prepare and support Value Based selling, bid process. Technical know of High voltage gas insulated switchgear is must . Bid proposal standardization competence development. Collaborate across the Tendering Competency Center (TCC) team in offering solutions to country / region specific customers. Close collaboration with the product group HUB Marketing Sales Managers (TM SM) responsible for the global market. Ensure all proposals follow relevant Hitachi Energy procedures and guidelines. Accountable for technical expertise and accuracy of the deliverables. Increase the PASS DTB sales volume by proposing innovative solutions based on attractive technical and commercial solutions. Engage with customers to learn and understand the drivers influencing their specification. Work out ideas on how to influence customer buying criteria. Engineering exposure in preparing alternate solutions for AIS to GIS, Hybrid conversion. Knowledge of Power Grid Market Hitachi Energy product System offerings. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your background A bachelor s degree in electrical engineering. Minimum 3 to 5 years of professional work experience in Substations. Technical or commercial background on university level or equivalent. Multi culture experience is a benefit. Proficiency in both spoken written English language is required.

Prepare timely and comprehensive pre-bid documentation presentations. Determine most technical appropriate and cost-effective solutions. Customer satisfaction improvement. Experience and skill to prepare and support Value Based selling, bid process. Technical know of High voltage gas insulated switchgear is must . Bid proposal standardization competence development. Collaborate across the Tendering Competency Center (TCC) team in offering solutions to country / region specific customers. Close collaboration with the product group HUB Marketing Sales Managers (TM SM) responsible for the global market. Ensure all proposals follow relevant Hitachi Energy procedures and guidelines. Accountable for technical expertise and accuracy of the deliverables. Increase the PASS DTB sales volume by proposing innovative solutions based on attractive technical and commercial solutions. Engage with customers to learn and understand the drivers influencing their specification. Work out ideas on how to influence customer buying criteria. Engineering exposure in preparing alternate solutions for AIS to GIS, Hybrid conversion. Knowledge of Power Grid Market Hitachi Energy product System offerings. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your background A bachelor s degree in electrical engineering. Minimum 3 to 5 years of professional work experience in Substations. Technical or commercial background on university level or equivalent. Multi culture experience is a benefit. Proficiency in both spoken written English language is required.

Work with Us. Change the Word. At AECOM, we're deivering a better word. Whether improving your commute, keeping the ights on, providing access to cean water, or transforming skyines, our work heps peope and communities thrive. We are the word's trusted infrastructure consuting firm, partnering with cients to sove the word’s most compex chaenges and buid egacies for future generations. There has never been a better time to be at AECOM. With acceerating infrastructure investment wordwide, our services are in great demand. We invite you to bring your bod ideas and big dreams and become part of a goba team of over 50,000 panners, designers, engineers, scientists, digita innovators, program and construction managers and other professionas deivering projects that create a positive and tangibe impact around the word. We're one goba team driven by our common purpose to deiver a better word. Join us. Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correates basic engineering data using estabished and we-defined procedures. Works on detaied or routine engineering assignments invoving cacuations and reativey simpe tests. Proposes approach to sove new probems encountered using modifications of standard procedures or methods deveoped in previous assignments. Identifies discrepancies in resuts. Provides guidance to entry eve engineers. Performs work in accordance with agreed upon budget and schedue with itte supervision. Independenty performs a the tasks necessary to compete primary design eements for engineering works. Performance at this eve requires deveopmenta experience in a professiona position. Responsibe for engineering design and modification activities reated to eectrica & eectronic circuits, systems, and equipment. May invove the instaation and operation & maintenance of eectrica systems and equipment. Discipine concerning power systems, eectronic and transmission equipment, eectric service and suppy systems, ighting systems, communication service and suppy systems, fire aarm and detection systems, contro systems or eectrica instaations. An eectrica engineer focuses on designing, maintaining and improving products that are powered by or produce eectricity. Eectrica engineering deas with eectricity, eectro-magnetism and eectronics. It aso covers power, contro systems, teecommunications and signa processing. These engineers are usuay concerned with arge-scae eectrica systems such as motor contro and power transmission, as we as utiizing eectricity to transmit energy. Quaifications Master of Engineering degree (or equivaent education) in an appropriate engineering discipine from an accredited coege or university. Chartered Engineer (CEng), or Professiona Engineer (PE) icense or equivaent in the reevant fied from any goba organization (e.g., Institution of Eectrica Engineers, UK) Minimum Overa 6+ years of work experience is preferred. Prior experience in eading arge design engineering teams performing Grid Substation design in a goba consutancy firm is preferred. Experience on HV Pant Design for arge EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utiities (for e.g., Nationa Grid, Transgrid, Powergrid etc.,) is highy desirabe Expsoure to Internationa standards (IEC, IEEE, ANSI, Austraian Standards and Midde East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Pant Primary design is preferabe Chartership or Feowship with IET or equivaent is highy preferabe Very good communication skis (Ora and Written) in Engish anguage is mandatory Additiona Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our empoyees and their famiies. We aso provide a robust goba we-being program. We’re the word’s trusted goba infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equa Opportunity Empoyer, we beieve in each person’s potentia, and we’ hep you reach yours. Join us and et’s get started. #LI-FS1

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good, Your impact Jacobs is a global provider of technical, professional, and scientific services including engineering, architecture, construction, operations, and project management Our portfolio spans industrial, commercial, and government clients across multiple markets and geographies We have a PAN-India presence; with five world-class engineering delivery centres in Mumbai, Gurgaon, Hyderabad, Bangalore & Kolkata, Responsibilities Responsible for contributing in a senior role to the efficient and compliant delivery of all civil and structural engineering design on the project, working with and reporting to the Lead Engineer, Responsible for ensuring a quality technical design delivery output, technical governance and quality and coordination and interface within a multi discipline project team Responsible for day-to-day engineering design support, client liaisons in relation to day-to-day structural engineering issues with taking design responsibility for parts of the structural design works on the project, We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work, Here's what you'll need Qualification Masters degree in Civil/Structural Engineering or another relevant Engineering Discipline, 2+ years of experience in design of Substations both GIS and AIS Substation, Equipment foundations etc Experience in Design of Steel structures such as Substation Buildings Material handling Structures, Equipment Support Structures, Steel Conveyers, Pipe racks etc , Experience in Civil Engineering Design of Substations, Foundations, Buildings, steel support structures as per UK and European standards, Experience in Analysis Softwares like STAAD Pro, ETABS, SAFE, ROBOT, TEKLA TEDDS preferred, Experience within civil discipline and experience in delivering complex multi-disciplinary projects e-g Power, Water, Transportation and Buildings will be an added advantage, Experience in preparing Design calculations and Detailed Design Reports essential, Experience in preparing Detailed drawings (AutoCAD or MicroStation) preferred but not essential, Experience of working for UK clients and in particular NG and other network operators will be an added advantage Why Jacobs At Jacobs we value people Having the right balance of diversity, career and lifestyle enables us to consistently deliver and exceed clientsexpectations, Working alongside industry leaders, you will have the opportunity to develop your career working on key projects in an environment which encourages collaboration, knowledge sharing and innovation To support your professional growth, Jacobs flexible working arrangements, extended leave options and a host of social, health and wellbeing events and initiatives will underpin our commitment to you At Jacobs its all about what you do, not where you are, which counts! Its a great time to join Jacobs Achieve more with a global brand,

Qualifications Minimum Qualification : B.E. / B. Tech. in Electrical / Electrical & Electronics Engineering Experience : 8-12 years (Must have experience in design aspects of Primary Engineering / Secondary Engineering in Substations / Power Distribution Projects) Job Description Objective: As Design Lead (Primary), the person shall be capable of reviewing & executing Primary Engineering Activities for AIS / GIS Substation Projects covering multiple geographical domains. He must have good knowledge in Layout Engineering in Substation Projects. He shall facilitate the modellers in development of BIM 3D Model for Substations. In addition, she / he has to coordinate with other departments including Inter-departmental checks covering, Electrical, Civil/ Structural, MEP and others. The Design Lead (Primary) shall be required to provide support for the engineering activities covering the full cycle of works from pre-bid engineering to support during commissioning and warranty periods and to extend support to site team. She / He shall lead a team of Design Engineers and Draughtspersons to manage the Engineering activities within budget, deliver on time and maintaining a high quality of engineering. Key Responsibilities: Timely Delivery of Engineering Drawings & Documents • Ensure deliveries are aligned to Project Schedule • Seek and obtain spatial requirements and details of cut-outs and openings from the Design Lead (Secondary) and incorporate into relevant Drawings • Review primary drawings by Design Engineers & Draughtspersons & checking of design & sizing calculations of primary engineering electrical equipment and obtaining approvals from the client • Review of Vendor deliverables pertaining to Primary Engineering • Capable of Multitasking and deliver multiple things on time • Estimate and Plan man-hour requirements • Review BOQ and submit to contracts team and providing technical clarifications • Coordinate with multiple disciplines for ensuring inter-departmental checks • Provide support & clarifications to the Site Execution team • Check pre-award evaluation of vendors (w.r.t. technical specifications requirement of the client) and forward the validation document to Supply Chain Management • Inspect equipment from the finalized vendor after submission of validation document of the vendor • Clarify issues w.r.t. the design & requirements of the client to the Site Execution Team • Collect inputs for project details (plot details, feeder arrangements etc.) from client & Project Engineering Manager Sensitivity: LNT Construction Internal Use • Coordinating with Operations team and informing Design specifications for obtaining approval • Collect inputs for project details (General Arrangement Drawings) from Vendors • Check deliverables such as Equipment layouts, Cable Routing Layout, Cable Tray Layout, Earthing Layout, lighting Layout, Lightning Protection Layout • Provide support to secondary team for reviewing Vendor drawings • Submit requirement of man-hours for undertaking & reviewing of design & drawings of the project Technical Expertise: The Design Lead (Primary) is required to have an overall knowledge of equipment layouts and necessary calculations. The Design Lead (Primary) should also have detailed knowledge of Substation equipment and their Layouts. Furthermore, she / he should have the understanding of primary engineering activities covering SLD Preparation, Layout Engineering, Earthing, Cable Routing, Lighting, Lightning Protection, Cable Tray Routing etc. He should be capable of performing design & sizing calculations of Busbar, UPS, DG, LT Transformer, Earthing Conductor, calculations (Short circuit force, Sag tension, CCC etc.). The Design Lead (Primary) is required to have knowledge on National and International Codes and Standards. The Design Lead (Primary) is required to understand and interpret the contractual technical requirements and facilitate the Project Teams as and when required. In addition, the Design Lead (Primary) should also have an overall understanding of the interdisciplinary (Civil & Structural, Mechanical and Instrumentation) design aspects of electrical equipment. Additional Information Experience in design engineering for AIS/GIS Substation upto 400 KV is preferred We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our peoples ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.

Role - Actimize Support lead/Manager Looking for minimum 4 years of experience in Actimize support side. Proficiency tool AIS/RCM/Actone Looking for PAN India location

OrganizationSiemens limited - Smart Infrastructure - Electrification and Automation – Customer Services – Field Services & Power Academy Mode of employmentFull time What are my responsibilities 1. Service Engineer - Installation, Testing & Commissioning, Maintenance, Troubleshooting 2. Excellent proficiency in LV & MV AIS & GIS Products 3. Proficiency in Protection & Automation will addon advantage 4. Responsibility will include 80-90% travelling What do I need to qualify for this job B.E. Electrical / Mechanical 10+ years’ experience in Electrical systems Must have good communication skills What else do I need to know Siemens is dedicated to quality, equality and valuating diversity and we welcome applications that reflect the diversity of the communities with in which we work. Please find more information at www.siemens.com Please find more information on our organization athttp://siemens.com/smartinfrastructure We are looking forward to receiving your online application. Please ensure you complete all areas of the application form to the best of your ability as we will use the data to review your suitability for the role. Contact If you have further questions regarding the job offer, please be free to contact recruiting manager

Looking for challenging role If you really want to make a difference - make it with us Siemens Energy is focused on helping customers navigate the world’s most pressing energy problems. As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees. With us, you can do something significant that benefits society and human progress Your new role – challenging and future-oriented Business Development Professional. We don’t need superheroes, just super minds - This role is for an Individual contributor responsible for Offer management of High Voltage Switchgear. A professional with agile mindset who is looking forward to grow in customer oriented domain by addressing and growing in Siemens world by understanding the expectations of Business and Market environment. Key Responsibilities Required to have hands-on technical knowledge in high voltage products and & expertise in AIS products for domestic market, prepare offers independently understanding the customer technical requirements. Agile to work dynamically in allocated regions/markets based on business needs. The candidate should be flexible to adopt to different regions/markets as per the business priorities progressively. Understand & analyze specifications, application of customer for selection of right products while offering to customers. Timely submission of pre bid clarifications, techno commercial offers, ensuring technical qualification in tenders, analyzing competitor technical offerings and pricing strategy on continuous basis. Commercial know how on Incoterms, Payment terms, contractual liabilities is necessary to evaluate the risks and strategize the offerings suitably. Prepare spec- in points to be able to collaborate with Business Development team & Sales for ensuring Siemens product USP’s are incorporated. Develop strong Collaboration with Internal functions to keep track of latest developments and ensure the latest updates, changes in the product features are well captured in the technical offer based on End Customer requirements. Preparation & Submission of credentials for Vendor approval process in various Utilities. Prepare monthly KPI reporting (E.g.Order forecast analysis, go rate, Get rate, Competitor pricing analysis etc.,) for the responsible region & products. Excellent written & verbal communication and presentation skills are prerequisites. Should be willing to collaborate with internal factory team and regional sales in timely manner adding value to the business by going extra mile. The Challenge To Keep pace with the Market and competition Experience Minimum 2-7 years . We’ve got quite a lot to offer. How about you This role is based in Aurangabad You’ll also get to visit other locations in India and beyond, so you’ll need to go where this journey takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you Site Engineer- BALCO, Korba Chhattisgarh , Siemens Energy, Full Time Looking for challenging role If you really want to make a difference - make it with us We make real what matters. About the role Candidate should have sound knowledge in the substation erection, testing and commissioning activities. Candidate should also have capabilities to meet the testing deadlines, expert in scheme/drawing interpretation, troubleshooting, sound knowledge of the testing kit operations. Should strictly adhere to EHS guidelines and well aware about the about the PTW process, LOTO process, Loading-unloading activities, etc. Candidate will also be responsible for the AMC and EHV equipment’s maintenance and testing activities at the site and will be responsible for the smooth execution of Contract and Maintenance planning, Environment, health and safety, Preventive, breakdown, and planned maintenance at the site. Candidate will be responsible for coordinating daily/weekly/monthly reporting to the client, Site material inventory management, and AMC of the Electrical network in an effective manner to achieve the agreed KPI (Highest Availability, less breakdown, critical equipment availability, etc. We don’t need superheroes, just super minds. Candidate with Bachelor’s degree in Engineering (Electrical), Min. 5 years of experience in field of Testing& Commissioning/Maintenance of EHV Substations equipment’s with at least 2 years of experience in responsible position on maintenance plant required. Very good technical know-how on AIS/GIS substation configurations. Good knowledge of MS Word, MS Excel & Power Points Excellent written & verbal communication, presentation skills. Candidate should have sound knowledge in the substation operation and maintenance activities, Customer handling, electrical trouble shooting. Also, should be well capable to handle the site manpower, contractor manpower, meeting customer KPI's and fulfil customer requirements. Should strictly adhere to EHS guidelines. Also, should be well aware about the recent industry standards rules of safety, PTW, LOTO process, etc. and expert in preparing of EHS documents. On site Planning and execution of Periodic Preventive maintenance, breakdown maintenance with trouble shooting capabilities of 400/220/132kV Power Transformer, Breaker, CT, PT, Control panel, Relays, ACDB, SCADA, Battery with Battery charger. We’ve got quite a lot to offer. How about you This role is based in Kolkata , where you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow. Find out more about Siemens careers at: www.siemens.com/careers

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 8+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Knowledge of AIS and GIS Substation design for all voltages up to 400kV is essential Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Preparation of Local control cubicle (LCC) design for projects based on customer specification. Understand and adhere to standard practices of leading utilities like PGCIL etc. Preparation of LCC schematics including interlocking logics, Coordination with HV GIS equipment and signal interface with other substation equipment. Preparation of LCC panel general arrangement drawing including front view, mimic arrangement, equipment arrangement of relays, terminal blocks etc. Prepare, review and validate Bill of material of LCC panels based on project requirement. Preparation of Site installation documents. Preparation of system documents like AC/DC load, Heat Loss/Load calculations and LV control cable specification. Preparation and update of MDL and ensure proper documentation review/ control. Prepare and maintain as built documents. Providing optimized and customized solutions for various substation tenders (GIS, Hybrid). Communicating with customers & solving technical queries related to Product / Project. Coordinating with the cross functional teams for design progress and completion. Coordinate with external vendors/ suppliers for panel deliveries. Plan, implement, review and continuously improvise quality system including documentation. Qualification: B.E/B. Tech (Electrical) Candidate Profile: with Should have minimum 1 - 4 years of relevant experience. Preference will be for qualified candidate worked on a) Panel / Cubicle design engineering for electrical products. b) Knowledge of Auto-CAD and Eplan drafting. Knowledge of relevant international standards ex. IEEE, IEC, IS etc. Proven verbal and written communication. Able to handle multiple projects simultaneously and to prioritize work.

Actimize Trade surveillance job description: 1. Candidate with 5-7 years of experience in Actimize AIS, Risk case manager. 2. Good hands-on experience on Custom development experience in AIS 3. Should have strong hands-on experience on Risk case manager designer to create alert types, alert views, work flow restrictions, users and roles 4. Candidate should have worked on Agile methodologies focusing on strict timelines 5. Candidate with good knowledge of Bitbucket and Ansible as a deployment tool 6. Candidate with good experience on Autosys scheduling agent 7. Though trade surveillance experience would be an added advantage, even with other Actimize solutions like transaction monitoring, fraud detection or sanction screening will also be applicable 8. Candidate should be a good team player working with cross functional teams 9. Good communication and inter-personal skills are required.

Responsibilities & tasks Design / review and detailed engineering for HV power lines, HV cables, transmission, distribution substations Calculation of induced voltages due to nearby high voltage cables / Overhead lines Calculation of inductive and capacitive coupling Earthing and bonding concept including calculation of touch and step voltage Knowledge of fault condition in high voltage transmission grids Preparing / reviewing of high voltage power cables, HV lines, magnetic field calculations and layouts Preparing / reviewing specifications and design of HV power system and equipment Preparing / reviewing of magnetic field calculations using COMSOL, CDEGS, PSCAD and EMTP or similar software. Preparing man-hour estimation for CTR preparation and review of tender documents. Preparation and evaluation of general project documentation. Coordination and follow up of packages with system Vendor. Coordination with Transmission System Owner and substation owner / contractor, issue and follow up of CSS questionnaire. Review / Preparation and evaluation of general project documentation in addition to engineering deliverables. Handling multi discipline task-oriented projects. Handling and guiding designers and draughtsman. Qualification Qualifications & Experience Master/Bachelor of Electrical Engineering preferably high voltage engineering from recognized University Should have the experience of 15 to 20 years in High voltage design and planning activities Experience of at least 3 years in the consulting firm is a must. Experience in working on US and European projects preferred. Completed at least one substation project including HV side and GIS / AIS switchboards Designing various overhead power transmission, distribution lines, cables, magnetic field calculations including substation and lines at 33kV / 110kV / 132kV / 220kV / 230kV / 400kV / 765kV. Experienced in preparing technical specifications, design calculations, preparation of reports, drawings and bill of materials for HV power systems. Experienced in grounding / earthing, lightning, Experienced in parametric modelling of cables, transformers and other electrical Equipment in simulation tools Experienced in planning and design of overhead powerlines, underground HV cables, Substations and grid rearrangement. Experienced in resolving site queries, attended site meetings and performed site inspections during the construction phase of projects. Effectively utilize project management tools and software to manage costs, maintain schedules, track project progress, and manage the transmission line design projects. Experienced in HVAC and HVDC Transmission line design and concepts Experienced in COMSOL, CDEGS, PSCAD and EMTP or similar EMF/EMT software’s. Experienced in performing technical, economic and environmental studies Knowledge of various international standards for high voltage system Excellent in English skills oral and written is very important and a requirement Skilled user of Microsoft office – Excel, Word Project work within high voltage plants / stations Design/design in one or more of the following: Control boards for high voltage systems Control and monitoring for high voltage installations Relay protection for high voltage systems Components for high voltage systems Earthing and lightning protection systems Preparation of documentation for one or more of the following: Control boards for high voltage installations Control and monitoring of high voltage installations Relay protection of high voltage systems Components for high voltage systems Earthing and lightning protection systems Inspetion at the production site/site of components and assembly Participation in relevant tests at suppliers and at the production site/site. Follow-up of quality assurance documentation Personal competences Engineering skills with analytical approach Work as a team member with good interpersonal skills Structured working style with result-oriented approach Should be able to build and maintain good relationships with clients and colleagues Excellent in English skills oral and written is very important and a requirement Additional Information Working at Ramboll To work at Ramboll means being part of a people organisation. We are focused on knowledge sharing and collaboration across competence areas and geography, and we aim for a strong diversity among our employees. This enables us to solve a broad range of projects, and we firmly believe that cross-collaboration leads to creative and longstanding solutions. Thus, the possibilities at Ramboll are many and diverse –we invest a lot in the development of people and offer career paths tailored for each individual. Welcome to our Energy division Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,800 experts in 14 countries, covering the full spectrum of technologies and all parts of the value chain from production and transmission to distribution, we plan, design and implement energy solutions all over the world. Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. How to apply If you are interested in applying, please send your application through our online recruitment system by clicking the link ‘apply’ below. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application.

Resonia (Erstwhile Sterlite Power and Transmission) is hiring Manager- Civil - Substation Design. Designation- Manager- Design and Engineering Exp - 8 years to 13 years Education - B.Tech / B.E- Civil Location - Gurgaon (Haryana) Role Purpose To perform review of design & drawing of sub-station package and create in-house design & drawing for bidding purpose. KRA : Capability of layout engineering for AIS & GIS substation project with relevant engineering calculations along with Structure and Civil Capability of layout engineering for AIS & GIS substation project with relevant engineering calculations along with Structure and Civil Engineering Calculations In depth understanding of EHV equipments & its support structures arrangements Capability of understanding Secondary foundations and building Engineering Essential - Worked on large scale capital projects-AIS and GIS. Desirable - B.Tech / B.E- Civil and must have good exposure in detailed design

: Job TitleActimize Engineer, AVP LocationPune, India Role Description Technical Lead Anti Financial Crime (AFC) Case Management System Actimize & SAM What we'll offer you As part of our flexible scheme, here are just some of the benefits that youll enjoy Best in class leave policy Gender neutral parental leaves 100% reimbursement under childcare assistance benefit (gender neutral) Sponsorship for Industry relevant certifications and education Employee Assistance Program for you and your family members Comprehensive Hospitalization Insurance for you and your dependents Accident and Term life Insurance Complementary Health screening for 35 yrs. and above Your key responsibilities Contributes and identifies and ensures server environments and deployment architecture Individual should be working on Acimize hands on AML, SAM, & Actone Case Management Solution Good understanding of hardware and software components, servers, code quality, security, etc. Hands on development as necessary to fill into coding, scripting, release management, software maintenance, etc. Ensures architectural changes (as defined by Architects) are implemented. Provides Level 3 support for technical infrastructure components (i.e., databases, middleware and user interfaces). Contributes to problem and root cause analysis. Integrates software components following the integration strategy. Verifies integrated software components by unit and integrated software testing according to the software test plan. Software test findings must be resolved. Ensures that all code changes end up in Change Items (CIs). Where applicable, develops routines to deploy CIs to the target environments. Supports creation of Software Product Training Materials, Software Product User Guides, and Software Product Deployment Instructions. Fixes software defects/bugs, measures and analyses code for quality. Collaborates with colleagues participating in other stages of the Software Development Lifecycle (SDLC). Identifies dependencies between software product components, between technical components, and between applications and interfaces. Identifies product integration verifications to be performed based on the integration sequence and relevant dependencies. Exposure to leading cloud solutions such as GCP, AWS would be an added advantage. Good understanding of infrastructure coding tools such as Chef, Terraform etc. Well verged with Networking concepts such as subnetting and firewalls Your skills and experience Strong understanding of technologies as under: VTL, JavaScript, AIS 4.29, ERCM 5.14 SQL ,Linux Automation BDD Cucumber ScriptingPython, Shell Scripts Server TechApache, Tomcat SCMBitBucket, Github Build ToolsTeamcity PracticesCode Quality, Sonar, Veracode, Security, DevOPS, Agile, CI & CD SchedulingControl M SDLC Tools - JAMA, JIRA, Sonar, Veracode /JFrog, TeamCity, BitBucket, ALM etc. 10+ Years of technology experience, continuous hands-on coding exposure, and ability to drive solutions At least 7 + Exp working on Actimize, AML, SAM & Fraud Solution Strong analytical skills. Proficient communication skills. Fluent in English (written/verbal). Ability to work in virtual teams and in matrixed organisations. Excellent team player and open minded approach Keeps pace with technical innovation. Understands the relevant business area. Ability to share information, transfer knowledge and expertise to team members. Ability to design and write code in accordance with provided business requirements Knowledge of IT delivery and architecture including knowledge of Data Modelling and/or BA. Experience with Test Driven Development (TDD) or Behavior Driven Development (BDD). Experience with unit and/or integration test tool chains and frameworks. (e.g. Wiremock, Mockito, PowerMock, Jasmine, Protractor etc.). Relevant Financial Services experience. Ability to work in a fast paced environment with competing and alternating priorities with a constant focus on delivery. Ability to balance business demands and IT fulfilment in terms of standardisation, reducing risk and increasing IT flexibility. Strong Actimize understanding with technical expertise and knowledge of below technologies Exposure to other technologies like UNIX, Job Scheduling (ExpControl-M) etc. Candidate is expected to have high desire to learn new technologies and implement various solutions in fast paced environment. Education Bachelor of Science degree from an accredited college or university with a concentration in Computer Science or Software Engineering (or equivalent) with a minor in Finance, Mathematics or Engineering. How we'll support you Training and development to help you excel in your career Coaching and support from experts in your team A culture of continuous learning to aid progression A range of flexible benefits that you can tailor to suit your needs

Roles and Responsibilities : Design, develop, test, deploy and maintain Actimize applications using Actimize Visual Modeler. Collaborate with cross-functional teams to identify business requirements and implement solutions that meet customer needs. Develop complex reports and dashboards using Oracle PL/SQL, SQL queries, and AIS (Actimize Integrated Services). Troubleshoot issues related to RCM (Real-Time Control Module) functionality in Actimize. Job Requirements : 3-12 years of experience in developing financial software applications using Actimize Visual Modeler or similar tools. Strong understanding of Oracle database management system and proficiency in writing PL/SQL scripts. Experience working on real-time trading systems or high-volume transaction processing environments is desirable.

Candidate with B.Tech/B.E (Electrical Engineering) and Diploma (Electrical Engineering)with min. 3 years experience in 11/33/132/220/400/765KV Substation equipment's testing and protection activities and with atleast 1 year of experience in responsible position on maintenance plant or testing company. GIS Erection Testing and Commissioning experience is an added advantage. Communication skills: Tamil, Hindi and English language proficiency. Local language will be an added advantage. Candidates should have sound knowledge in the substation erection, testing and commissioning activities. Candidate should also have capabilities to meet the testing deadlines, expert in scheme/drawing interpretation, troubleshooting, sound knowledge of the testing kit operations.

Key Responsibilities: Pre-Bid Design: 1. Study of tender documents and prepare technical quarries. 2. Prepare the Bill of quantity for structure and civil works for tender estimates. Detail Engineering: 1. Prepare/ review the design calculation of the support structures and foundation for the substation equipment. 2. Prepare/ review design and details of gantry structure and foundations. 3. Prepare/ review design and details of earth retaining structures. 4. Understand/ review the soil investigation report and able to discuss with Geotech consultant/ client on geotechnical aspects. 5. Give necessary inputs to draftsperson and review civil drawings of towers, control building/ GIS building, substation equipment and cable trench. 6. Well versed with various design standard IS Codes/ EURO Codes/ American codes and should have worked on international projects. 7. Well versed with seismic design and detailing of buildings and other structures 8. Review the detail structural and fabrication drawing prepared by the fabricator. 9. Prepare the details BOQ of civil item. 10. Issue the drawings to site/ client 11. Technical support to site at the time of project execution and commissioning. 12. Collection of the site data by site visit.