AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: 3 - 7 Years (Exposure to outside India projects preferably Middle East, UK, USA, Canada & ANZ region ) Preparation, Review and production of Electrical (EHV, HV, MV, LV), Street Lighting, Telecom, ELV, ICT Network, Pump station, Water Treatment Plant, EV charging Station, Substation, Power Transmission & Distribution network Design Calculation: Street lighting, High Mast Area Lighting, Cable sizing & Voltage drop, Earthing, Fault level, Corridor sizing Software: Dialux, AGI, Lighting Reality, Amtech, ETAP Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team
Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements.
The Senior Associate Director/Deputy Head of Rails will be responsible for supporting the Head of rails and EC senior management in delivery and operations and help them to build up and grow the headcount of our India team. This includes interviewing selecting and onboarding the right candidates. Lead the team supporting our Rail projects. This is a senior role within AECOM which requires strong technical understanding of the Rail sector. Great leadership ability and the ability to gain the confidence and trust of major clients. The ability to identify the most appropriate solutions to a wide range of projects, including promoting innovative ideas is an important requirement of the role. Roles and Responsibilities: Develops technical solutions to a wide range of difficult problems. Works under only general direction. Independently determines and develops approach to solutions. Experience in Rail Market overall. Experience in UK, UAE, US, Canada, Middle East (preferred). Should be knowledgeable in rail design services, associated regulations and technical standards. Capable of working on as own initiative, as an overall responsibility and accountability for assigned work. Must be a team player and possess strong interpersonal skills. Must be able to make decisions, act on own initiative and operate in a pro-active way. Maintains affiliation with professional societies to keep abreast of current technologies. Collaborating with other senior management to formulate strategy for Business Continuity and requirements. Enhance the communication channel between businesses, Support functions and management. Implementation of important policy and processes. Interface between Support functions and Business. Implement efficient process and mechanism for streamline working between businesses and support functions. Oversee the adoption of new technology solutions in the businesses. Regular reporting to senior management about the performance and issues and suggest improvements. Requirements: Ability to build consensus and relationship among business leads, management and employees. Excellent communication and influencing skill. Good in Business Negotiation and people management. A strong managerial acumen and familiarity with business administration principles. Prioritizing and delegating task ability. Able to introduce new processes and improve existing processes and get buy in from all. Must have leadership skills/ability. Roles required people with good stress tolerance. Ability to get the job done. Qualifications: Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Applicants must have more than15 years of experience in Civil Engineering, UK/MiddleEast/US/experience,which would be desirable but are not essential. Able to see the bigger picture and take abirds-eye view of projects Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Strong problem-solving skills Enthusiastic and Self-motivated.
Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Develops and maintains HVAC system designs, including load calculations, equipment selection, and ductwork layouts. Collaborates with cross-functional teams to ensure HVAC designs integrate seamlessly with other building systems. Conducts energy modelling and analysis to optimize HVAC system efficiency and sustainability. Prepares detailed technical reports and presentations for clients and stakeholders. Ensures compliance with relevant building codes, standards, and regulations in HVAC design. Participates in site visits to assess existing HVAC systems and propose improvements or retrofits. Qualifications Minimum Requirements Master's degree in Mechanical Engineering or related field 7+ years of experience in HVAC system design for commercial and industrial buildings Proficiency in HVAC design software such as HAP and IES Strong knowledge of ASHRAE standards and local building codes Excellent problem-solving and analytical skills International project exposure (US, UK, MEA, and Singapore) and familiarity with respective building codes Proficiency in Revit, AutoCAD, and Navisworks Experience with energy modeling and sustainability analysis Strong communication and presentation skills Ability to mentor junior engineers and lead project teams Familiarity with project management principles and practices
We are seeking an experienced and visionary Senior BIM Manager (BIM Lead) to join our growing team. The ideal candidate will be a seasoned Architect with 18+ years of experience and at least 10+ years working in BIM/CAD management roles, leading the implementation and delivery of large-scale, multidisciplinary projects using advanced BIM technologies. This role is perfect for a dynamic professional who thrives at the intersection of digital design and construction and who is passionate about driving BIM adoption, innovation, and quality across all project stages. Key Responsibilities Develop, implement, and review BIM strategies, BIM Execution Plans (BEPs), and project-specific standards. Lead coordination of BIM activities across internal teams and design subcontractors. Provide hands-on BIM production support, including model federation, clash detection, 3D/2D deliverables, and Common Data Environment (CDE) maintenance. Train project delivery teams on CDE platforms (e.g., ProjectWise, ACC/BIM360) and BIM workflows. Regularly assess BEP implementation, conduct audits, and identify opportunities for continuous improvement. Act as the key BIM liaison between clients, internal teams, and IT support. Lead efforts to integrate 3D models with scheduling tools for 4D simulation and enable model-based quantity takeoffs and progress tracking. Project Experience Proven ability to lead BIM/CAD teams on complex projects. Experience working on semiconductor or high-tech manufacturing facilities is highly preferred.? Required Knowledge and Skills: Proficiency in AutoCAD, Revit, and Civil3D and visualization software. Proficiency in creating Dynamo scripts and knowledge of programming languages would be a plus point. Previous experience developing project BIM templates, standards, LOD, & classification systems, class libraries, and master data models on large-scale projects. Working knowledge and proficiency with collaboration and data management solutions: Navisworks, 3D/BIM-enabled quantity take-off, and BIM-enabled estimating tools (Assemble, CostX, etc) Understands project workflows from design, estimation, construction administration, and coordination. Collaborates well in a team environment. Ability to manage priorities and take on additional evolving responsibilities Knowledge of CDE platforms such as ACC/BIM360 Excellent communication and interpersonal skills to explain digital transformation and digital solutions and technologies to all levels of the organization. Ability to work within a culturally diverse organization, recognizing and respecting differences. Ability to problem solve, especially in an integrated project delivery environment, applying industry best practices. Self-motivated individual with outstanding leadership skills and the ability to influence without authority. Strong leadership skills, proven ability to lead a team effort & make independent decisions, and be a good troubleshooter. Capacity guide and train Architecture, Engineering and construction staff Skilled at communicating digital solutions and workflows to technical and non-technical audiences. Experienced in stakeholder coordination across design, construction, and project management teams. Strong track record of enhancing BIM workflows and promoting interoperability across platforms. Technical Skills Advanced proficiency inAutoCAD, Revit, Civil 3D, and visualization tools. Familiarity withNavisworks, CostX, Assemble, and other BIM-based estimating tools. Skilled inDynamo scriptingand preferably knowledgeable in programming for BIM automation. Experience in developing BIM templates, libraries, classification systems, and LOD definitions. Working knowledge ofACC/BIM360,GIS integration, and data management systems. Leadership & Mindset Strong leadership and mentoring skills with a collaborative, proactive attitude. Excellent analytical, organizational, and problem-solving capabilities. Ability to influence cross-functional teams and manage evolving responsibilities. Cultural sensitivity and team-player mindset in global project environments. Promote lessons learned, manage issue/action logs, and ensure compliance with ISO19650 standards. Support BIM Coordinators and consultants with best practices and digital delivery processes. Champion digital transformation through standardization, training, and stakeholder engagement.
Contribute to engineering design assignments in a team environment on large-scale project teams. Candidate should have minimum 2 years working experience on wastewater modelling for ANZ and UK & I region especially on model calibration & verification. Candidate should be well versed with Infoworks ICM hydraulic modelling software. Having hands on experience with modeling tools like Water GEMS, SewerGEMS, StormCAD, PCSWMM, HEC-RAS, GeoPak would be advantage. Capable for leading the project, coordinating with Lead Office, mentoring juniors and ensuring quality checks. Complete design activities to specified standards including earthworks modelling and design, sanitary and storm sewer design, watermain design, grading of roads and drive isles, lot grading, and stormwater management design of ponds and other retention systems. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). Highly motivated, hardworking, interpersonal, and enthusiastic team player that is willing to learn and adapt to change. US/UK/Canada Experience will be added advantage Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team
AECOM is seeking for a candidate to be based in Bangalore or Gurgaon with the following skill sets: Experience with bridge and related structural design schemes. Able to produce detailed design calculations on routine engineering assignments. Proven design and project management experience delivering to quality, time and budget. Experience in road and/or rail projects. High level technical skills design. Able to correlate and interpret the data shared by supporting interdisciplinary teams. Problem solving skills, able to propose alternative solutions for problems encountered. Experience in complete life cycle of a design project within Highway/Railway environment. Previous exposure with international codes such as Eurocodes, AASHTO, AREMA and ACI. Able to work in a diverse team spread across different geographical locations. Able to provide guidance to Entry level Engineers. Able to review calculations undertaken by Entry level Engineers. Strong ability in various software packages ideally including MIDAS, Autodesk Structural Bridge Design, LUSAS with experience in Finite Element Analysis preferred. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). 3+ Years of Experience Should have Midas knowledge and ME experience Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work.
Builds analytic and design skills. Conducts engineering design under the supervision of an experienced engineer. Creates designs, calculations, sketches, diagrams, schematic drawings, and final working drawings under the supervision of an experienced engineer. Collects and analyzes data under the supervision of an experienced engineer. Uses computer software as a tool for solving basic engineering problems. Performs work in accordance with agreed upon budget and schedule under supervision. Qualifications Must have Master in Civil or Structural Engineering.
Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Requirements Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory
Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements. Candidate must have working experience in Civil 3D and AutoCAD tools in Utility projects. Good knowledge in common Data Environment(CDE) such as project wise, BIM 360, ACC. Experience with developing reports and presentations. Excellent interpersonal and communication skills for individual interactions and in group settings. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. Civil 3D and CAD Specialist with 5+ years of experience in the Water utilities field. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team.
Duties & Responsibilities Serves as lead engineer on mid- to large size projects. Provides specialized technical input to studies and design for staff's specific area of expertise. Approves and signs off on work. Provides technical expertise for studies and design efforts. Presents complex technical solutions to clients. Performs quality control reviews of work developed by others. Participates in development of technical proposals. Provides estimates for the engineering budget and schedule to meet requirements on large projects. Oversees and coordinates HVAC system design for complex projects. Develops and implements energy-efficient HVAC solutions. Mentors and guides junior engineers in HVAC design principles. Ensures compliance with local and national building codes and regulations. Collaborates with cross-functional teams to integrate HVAC systems with other building components. Conducts site visits to assess existing HVAC systems and recommend improvements. Stays current with industry trends and emerging technologies in HVAC design. Qualifications Minimum Requirements Bachelor's degree in Mechanical Engineering or related field + 15years of relevant experience, or demonstrated equivalency of experience and/or education Professional Engineering (PE) license in HVAC Extensive knowledge of HVAC systems, design principles, and energy-efficient solutions Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP, Trane TRACE) Strong understanding of building codes and ASHRAE standards Excellent project management and leadership skills Superior communication and presentation abilities Demonstrated experience in managing mid to large-size HVAC projects Preferred Qualifications Master's degree in Mechanical Engineering or related field LEED AP certification Experience with Building Information Modeling (BIM) Knowledge of sustainable design practices and renewable energy systems Familiarity with commissioning processes Experience in mentoring junior engineers Active participation in professional organizations (e.g., ASHRAE, USGBC)
Flow & quality data analysis Preparing process flow diagrams, P&IDs Producing mass balances/process sizing calculations Preparing process & performance specifications Process Modelling and simulation using software like BioWin Providing mentoring and support for junior engineers and CAD technicians Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Chemical or Environmental Engineering field from a recognized university. Professional registration or licensure in their designated home office country or be inactive pursuit of such registration. Awareness of pipe network design codes. Experience in designing Water Treatment systems including conventional and advance system. Experience in designing Wastewater Treatment systems like ASP, MBBR, SBR, MBR, Digesters, Solids Handling system, Desalination system, etc. Awareness of Quality aspects (i.e., registers, design issues logs, QC process and design transmittals etc.). Able to independently work efficiently and meet required deadlines by following relevant design manuals/standards and practices. 8 - 10 Years of experience in water/wastewater industry. Having hands-on experience in process simulation modelling. Experience in Detailed Design of Wastewater Water, Water, Biosolids and Desalination Systems. Good English communication skills. Good team player
Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Designs and develops electrical systems and components for various projects. Creates and modifies electrical schematics and wiring diagrams using CAD software. Conducts load calculations and performs electrical system analysis. Collaborates with cross-functional teams to ensure integration of electrical systems with other engineering disciplines. Prepares technical reports and documentation for project deliverables. Assists in the development of project specifications and cost estimates. Participates in site visits to gather information and assess existing electrical installations. Ensures compliance with relevant electrical codes and standards in all designs. Contributes to continuous improvement initiatives within the electrical engineering department. Qualifications Qualifications: Bachelor's degree in Electrical Engineering required; Master's degree preferred Minimum of 3-5 years of experience in electrical design for commercial or industrial projects Professional Engineer (PE) license preferred Proficient in at least one of the load calculation software such as AMTECH and ETAP Skilled in using one or more lighting calculation software (e.g., AGi32, DIALux) Proficient in use of Revit and AutoCAD. Working knowledge of Navisworks is required Experience with Building Information Modeling (BIM) and 3D modeling software Thorough understanding of National Electrical Code (NEC) and other relevant industry standards Knowledge of power distribution systems, lighting design, and control systems Familiarity with energy-efficient design practices and LEED certification requirements Strong analytical and problem-solving skills Excellent communication and interpersonal skills for collaborating with cross-functional teams Ability to manage multiple projects simultaneously and meet deadlines Willingness to travel for site visits and client meetings as needed Commitment to continuous learning and staying updated with industry trends and technologies
Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Demonstrates proficiency in both electrical and ELV (Extra Low Voltage) systems design. Utilizes Revit, AutoCAD, and Navisworks software to create and modify 3D models and 2D drawings. Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines. Collaborates with cross-functional teams to ensure seamless integration of electrical and ELV systems within the overall building design. Conducts clash detection and resolution using BIM tools to identify and resolve conflicts between different building systems. Develops and maintains project-specific content libraries and families within Revit for electrical and ELV components. Participates in project meetings to discuss design progress, challenges, and solutions with clients and team members. Ensures compliance with relevant codes, standards, and regulations in electrical and ELV system designs. Prepares detailed documentation, including specifications and bill of materials, for electrical and ELV systems. Mentors junior designers and provides guidance on best practices in BIM and electrical/ELV design. Stays updated on the latest industry trends, technologies, and software advancements in electrical BIM and ELV systems. ContributesKnowledge in software like Revizto and Microstation will be an added advantage. to the continuous improvement of the company's BIM standards and workflows. Qualifications Qualifications: Required: Bachelor's degree in Electrical Engineering, Building Services Engineering, or related field Minimum of 5 years of experience in electrical and ELV systems design Proficiency in Revit, AutoCAD, and Navisworks software Strong understanding of BIM principles and workflows Extensive knowledge of electrical and ELV systems, including power distribution, lighting, fire alarm, security, and communications systems Familiarity with relevant electrical codes, standards, and regulations Excellent problem-solving and analytical skills Strong communication and collaboration abilities Ability to work effectively in a team environment Preferred: Master's degree in Electrical Engineering or related field Professional Engineer (PE) license or equivalent certification Experience with Intergraph SmartPlant or Plant 3D software Knowledge of sustainable design principles and LEED certification requirements Familiarity with clash detection and coordination processes Experience in mentoring junior designers Knowledge of software like Revizto and Microstation Proficiency in project management and scheduling tools Ability to work on multiple projects simultaneously and meet deadlines Continuous learning mindset and willingness to stay updated on industry trends and technologies
Lead and oversee the design of mechanical systems for water, wastewater, and desalination projects Develop and review process flow diagrams, P&IDs, and equipment layouts for water treatment facilities Perform hydraulic calculations and equipment sizing for pumps, pipes, and other mechanical components Collaborate with multi-disciplinary teams to ensure integration of mechanical designs with other engineering disciplines Manage and mentor junior designers and drafters in the use of Revit, Plant 3D, and AutoCAD software Ensure compliance with relevant codes, standards, and regulations in mechanical system designs Prepare technical specifications and equipment data sheets for procurement purposes Conduct site visits to assess existing conditions and gather necessary information for design projects Participate in client meetings and presentations to communicate design concepts and solutions Review and approve mechanical drawings and models before final submission Troubleshoot design issues and provide innovative solutions to complex engineering problems Coordinate with vendors and contractors to ensure proper implementation of mechanical designs Stay updated on industry trends and emerging technologies in water and wastewater treatment processes Contribute to the development of best practices and standard operating procedures for the mechanical design team Assist in the preparation of proposals and cost estimates for new projects Qualifications Bachelor's degree in Mechanical Engineering, Chemical Engineering, or related field from an accredited college or university. Master's degree preferred. 5 - 10 years of experience in the water/wastewater industry, with a focus on process mechanical design for treatment facilities. Professional Engineering (P.E.) license or ability to obtain within 6 months of hire. Proven expertise in using Revit, Plant 3D, and AutoCAD for water market-related designs. Proficiency in hydraulic modeling software such as WaterGEMS or InfoWater is a plus. Demonstrated experience in project management, including budget control, resource allocation, and timeline adherence. Strong leadership skills with the ability to mentor junior team members and collaborate effectively with multi-disciplinary teams. Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences. In-depth knowledge of AWWA, ANSI, ASME, and other relevant industry standards and regulations. Experience with sustainable design practices and familiarity with LEED certification processes. Proficiency in Microsoft Office Suite, particularly Excel for data analysis and PowerPoint for presentations. Ability to perform site visits and field work, which may involve climbing ladders, walking on uneven surfaces, and lifting up to 30 pounds. Professional registration in their designated home office country or be in active pursuit of such registration. Willingness to travel up to 25% of the time for project site visits and client meetings. Strong problem-solving skills and ability to develop innovative solutions for complex engineering challenges. Commitment to continuous learning and staying updated on emerging technologies in water and wastewater treatment processes.
Duties and Responsibilities Works under limited supervision, demonstrating a high level of autonomy and decision-making ability. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Directs project support and production for assigned projects, creating drawings as required using established standards and content to meet job requirements (objects within the drawing, doors, lights, etc.). Leads the development and implementation of BIM strategies and workflows to optimize project efficiency and accuracy. Collaborates with cross-functional teams to ensure seamless integration of BIM models with other disciplines (structural, mechanical, electrical, etc.). Manages and maintains BIM libraries, ensuring up-to-date content and adherence to company standards. Conducts quality assurance checks on BIM models to ensure accuracy, completeness, and compliance with project requirements. Participates in client meetings to present BIM solutions and address technical queries. Stays current with industry trends and emerging technologies in BIM and Plant Data Centric design, recommending improvements to existing processes. Mentors junior designers, fostering their professional development and enhancing the team's overall BIM capabilities. Troubleshoots complex modeling issues and develops innovative solutions to overcome technical challenges. Contributes to the development of company-wide BIM standards and best practices. Assists in the preparation of project proposals and cost estimates related to BIM implementation. Qualifications Minimum Requirements Bachelor's degree in Architecture, Engineering, or related field + 6 years of relevant experience, or demonstrated equivalency of experience and/or education Proficiency in Revit, AutoCAD, and Navisworks Extensive knowledge of Building Information Modeling (BIM) principles and practices Strong understanding of PHE (Plumbing, Heating, and Electrical) systems and their integration in BIM Demonstrated experience in leading BIM projects and mentoring junior designers Knowledge of fire fighting systems including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Proficiency in additional software such as Revizto and Microstation Certification in BIM (e.g., Autodesk BIM Specialist, BIM Level 2 Certification) Experience with Plant Data Centric design Strong problem-solving skills and ability to troubleshoot complex modeling issues Excellent communication and presentation skills for client interactions Knowledge of industry standards and best practices in BIM implementation Experience in developing BIM strategies and workflows to optimize project efficiency
Lead in the production of track designs and provision of technical support throughout to support all stages of the design process (Feasibility through to Construction) in both Plain Line and S&C, especially in the ANZ region. Independently deliver / manage the production of design deliverables in accordance with client requirements Acts as a Senior technical resource and serve as technical advisor and/or mentor for lesser experienced team members. Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high-quality cost-effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component. Performs quality control review of design calculations, Models, or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Agility in the face of dynamic project stages. This position may also be leading similar designs in other global regions if required. Qualifications Master of Engineering degree or Bachelor degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Washington Accord accredited preferred. Registered Practicing Engineer - Victoria (RPEV), (RPEQ), or eligible for qualification or working towards. 12+ Years of Track Design experience in both greenfield and brownfield projects with substantial experience in Australian or New Zealand Projects. Prior or current experience in gauging as per ESC215 in New South Wales is mandatory. Proficiency in Power Rail Track, Microstation mandatory. Open Rail Designer preferred. Extensive experience and Technical Proficiency in Plain Line and Switches & Crossings mandatory, preferably in ANZ region. Experience with earthworks, including cut and fill modelling and quantity estimation. Solid understanding of Australian Track Design including interpretation of Standards and application of SiD, HSE regulations. Solid understanding of track construction methods, stageworks of projects, Permanent Way components and surveys in Australian region. Working knowledge of AMB standards and requirements Demonstrated ability to author technical reports. Demonstrated ability to present their work and represent their colleagues on the project in presentations and meetings. Technical quality of deliverables undertaking checks of design deliverables completed by team members in accordance with company procedures. Timely delivery in accordance with design programmes. Experience of Attendance at technical design reviews including Design and Construction Interface meetings and Interdisciplinary Design Checks to present Track design. Keep up to date with industry best practices and where appropriate apply best practices within the project team environment.
Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Minimum Requirements Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Healthcare design experience required Overall 13+ years of work experience is preferred.
AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Requirements Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory
Contribute to engineering design assignments in a team environment on large-scale project teams. Candidate should have minimum 5 years working experience on wastewater modelling for ANZ and UK & I region especially on model calibration & verification Candidate should be well versed with Infoworks ICM hydraulic modelling software. Having hands on experience with modeling tools like Water GEMS, SewerGEMS, StormCAD, PCSWMM, HEC-RAS, GeoPak would be advantage. Experience in working in Common Data Environment (ProjectWise and BIM 360) Capable for leading the project, coordinating with Lead Office, mentoring juniors and ensuring quality checks Complete design activities to specified standards including earthworks modelling and design, sanitary and storm sewer design, watermain design, grading of roads and drive isles, lot grading, and stormwater management design of ponds and other retention systems. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). Highly motivated, hardworking, interpersonal, and enthusiastic team player that is willing to learn and adapt to change. US/UK/Canada Experience will be added advantage Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team