3186 5S Jobs - Page 29

As a Manufacturing Process Engineer at our company, you will be responsible for installing and qualifying new process equipment, troubleshooting day-to-day manufacturing issues, and implementing system improvements to enhance throughput, yield, and product performance. Your role will require process or equipment engineering experience in thin-film deposition processes or thermal processing in the semiconductor/glass industry. You should have a demonstrated knowledge of PLC and Controls, Vision system knowledge, Statistical Data Analysis, Metrology, Design of Experiments, Statistical Process Control, and various problem-solving methods. In addition, you must possess excellent problem-solving skills, proficiency in generating manufacturing documentation, understanding of manufacturing processes, and the capability to train operators, technicians, and new engineers. Strong communication skills, both oral and written, are essential for this role. To be considered for this position, you should hold an engineering degree in a technical discipline with at least 3 years of engineering experience in a manufacturing setting. Knowledge of General Electronics, General Mechanical Systems, and Robust Engineering principles is desirable. As part of your responsibilities, you will develop, improve, and document solar module manufacturing processes, work on new process development, design experiments, and address production, equipment, and process issues. You will also be involved in equipment installation and qualification, data collection, communication with internal associates and suppliers, and continuous improvement activities. Physical requirements for this role include the ability to sit, stand, walk, climb stairs, lift objects, and wear personal protective equipment. You should have good vision, be able to comply with safety standards, and travel domestically and internationally as needed. If you are a proactive, detail-oriented engineer with a passion for process optimization and product performance, we encourage you to apply for this position and be part of our dynamic team located at Plot No.A-1/1 SIPCOT Industrial Park, Sriperumbudur, Tamil Nadu, IN.,

Job Description Company Profile Divine Engineering Services Pvt. Ltd. is a dynamic and growth-driven engineering company based in Surat, Gujarat, specializing in fabrication and industrial engineering solutions. We are committed to quality, innovation, and excellence through global standards and teamwork. Job Title Senior Engineer – Production Department Production Reporting To Production Head / Plant Manager Location Olpad, Surat Employment Type Full-time Working Hours & Shift 09:00 to 18:30 Role Overview Responsible for managing daily production activities on the shop floor, ensuring quality, timely delivery, and effective coordination with inter-department teams. This role requires strong technical knowledge in fabrication, manpower handling, and a drive for continuous improvement in productivity and safety. Roles and Responsibilities Lead and supervise day-to-day fabrication and production activities Review fabrication drawings and coordinate with design and planning teams Manage manpower allocation and ensure shift-wise productivity Monitor processes like welding, fitting, cutting, and assembly Implement 5S, Lean, and safety practices across the shop floor Ensure timely material availability in coordination with stores and procurement Minimize wastage, control rework, and ensure quality adherence Maintain production reports, logs, and daily MIS Coordinate job completion as per project timelines Mentor and guide junior engineers and production supervisors Key Skills Manpower and shift management Interpretation of structural fabrication drawings Strong leadership and communication Knowledge of welding standards, tolerances, and material handling Result orientation with problem-solving skills Technical Knowledge Fabrication process (cutting, welding, fitting, assembly) Structural steel materials, tolerances, and quality standards CNC, plasma, and welding equipment operation ISO standards and shop floor safety compliance Basic understanding of ERP/production software IT Skills MS Office (Excel, Word, Outlook) AutoCAD / Tekla (basic understanding for drawing reference) ERP system familiarity (preferred) Qualification & Experience Qualification: Diploma / B.E. / B.Tech in Mechanical or Production Engineering Experience: 7–12 years in fabrication production environment Compensation As per company norms

Sound Technical Knowledge about the Store activities & knowledge of Lean Manufacturing Tools like 5S, JIT, Kanban, Kaizen etc. Capable of handling minimum inventory levels, managing consumption etc. on a software/ERP Knowledge of tax and excise Required Candidate profile Bachelor Degree in Stores/Materials Management / Graduation in any filed with PGDM Need to have ERP knowledge Must have good Communication & Negotiation Skill

Smart infrastructure from Siemens makes the world a more connected and caring place – where resources are valued, where impact on the world is considered, where sustainable energy is delivered reliably and efficiently. It provides the flexible infrastructure to allow society to evolve and respond to changing conditions. Technology and the ingenuity of people come together to be at one with our environments and to care for our world. We do this from the macro to the micro level, from physical products, components and systems to connected, cloud-based digital offerings and services. Siemens offers a broad portfolio of grid control and automation; low- and medium-voltage power distribution, switching and control; and building automation, fire safety and security, HVAC control and energy solutions. We are looking for an experienced professional with a keen interest in new age warehouse management, have to be a tech savvy person with keen interest in digitalization. Skills Required: SAP Warehouse Management, MM & SAP Fiori. Supply Chain & Logistics. Inventory Management. Power BI Packing and Outbound dispatch Key responsibilities would involve: Warehouse management - Material inward & outward. Driving automation projects in material consumption through SAP. Maintain FIFO for components. Carry out half yearly inventory counting and perpetual inventory every month. Handle FG packing and dispatch activities - implement new digitalized solutions in dispatch. Manage scrap area. Knowledge in Power BI. Track material shortages and provide immediate resolution. Maintain HIRA and Risk assessment for receiving and stores area. Continuous improvement in stores operations for maximum utilization of space. Maintain housekeeping and 5S in stores, receiving and packing area. Drive digitalization in stores activities. Strategically manage warehouse in compliance with company’s policies and vision. Monitor inventory status and generate inventory reports. About Us We’re Siemens. A collection of over 372,000 minds building the future, one day at a time. We're dedicated to quality and equality, and we welcome applications that reflect the diversity of the communities we work in. Bring your curiosity and imagination and help us shape tomorrow. Want to join us and be a Future Maker? We are looking forward to receiving your online application. Please ensure you complete all areas of the application form, to the best of your ability to help us review your suitability for the role.

Key Responsibilities: ✅ Drive Continuous Improvement (CI) initiatives using Lean Manufacturing/ TPS, Six Sigma, Kaizen, 5S, OEE, Value Engineering etc. ✅ Analyze production processes, workflows & systems to identify improvement areas ✅ Develop efficient systems integrating machines, materials, information & energy ✅ Conduct time & motion studies to establish SOPs ✅ Design equipment and workspace layouts for optimal efficiency ✅ Assist in capacity planning, scheduling, and resource utilization ✅ Track and analyze KPIs productivity, cost, quality & delivery ✅ Prepare insightful reports, documentation & presentations for management Qualifications: 🎓 Bachelor's in Industrial or Mechanical Engineering (or related field) 🛠️ Minimum 8 years' experience in Industrial Engineering / Process Improvement 📊 Strong knowledge of Lean Manufacturing & Six Sigma. - Proficient in MS Office, Minitab &/or MS Visio 🧠 Excellent analytical, problem-solving, project management and presentation skills 💬 Effective communicator & team collaborator Interested candidates can share their CV with below details to hrd7@polymedicure.com Current Salary- Expected Salary-

Job Purpose: To lead the Quality Assurance department and ensure all garments meet internal and external customer quality standards. The role involves developing and implementing quality systems, ensuring in-line and final product quality, managing audits, and driving continuous improvement across production processes. Key Responsibilities:Quality Management: Develop, implement, and monitor QA systems and SOPs across the production floor. Ensure all garments meet customer quality requirements and international standards (e.g., AQL levels). Supervise inline, end-line, and final inspections for all styles and production stages. Coordinate with the production team to ensure preventive measures are taken to reduce defects. Team Leadership: Lead and manage the QA team including inline, end-line, and final auditors. Train quality inspectors and production operators on quality standards and best practices. Conduct regular team performance evaluations and implement skill improvement plans. Process Improvement: Analyze defect trends and root causes, and lead corrective and preventive action (CAPA). Drive continuous improvement initiatives like 5S, Lean, and Six Sigma where applicable. Monitor rework, rejection, and alteration rates and take timely action. Compliance and Audits: Prepare and face internal and external quality audits (buyer, third-party, certification audits). Ensure compliance with buyer quality manuals and technical specifications. Maintain documentation and reports as per buyer and industry requirements. Coordination & Communication: Act as the key contact point between production, merchandising, and buyers' QA teams. Attend pre-production meetings (PPM) and give quality-related inputs. Review tech packs, samples, and buyer comments to ensure quality consistency Job Types: Full-time, Permanent Pay: ₹100,000.00 - ₹125,000.00 per year Benefits: Life insurance Work Location: In person

Key Responsibilities: Mould Maintenance & Repair: Supervise preventive and corrective maintenance of injection/blow moulds. Schedule routine inspection and maintenance activities to avoid unplanned downtimes. Troubleshoot technical issues in moulds and ensure timely repair and reconditioning. Maintain records of mould history and maintenance logs. Documentation & Reporting: Maintain detailed documentation for mould usage, repairs, and performance. Prepare daily, weekly, and monthly maintenance reports. Track maintenance KPIs such as MTBF (Mean Time Between Failures) and MTTR (Mean Time To Repair). Quality & Safety Compliance: Ensure all maintenance activities meet ISO/TS/QA standards. Implement and monitor 5S, Kaizen, and TPM practices within the department. Promote a culture of safety and ensure compliance with safety regulations. Cost Control & Planning: Plan and control maintenance budgets. Optimize resource utilization and reduce wastage. Evaluate vendors for external mould maintenance services, if required. Job Type: Full-time Pay: ₹300,000.00 - ₹420,000.00 per year Benefits: Paid sick time Paid time off Provident Fund Schedule: Day shift Night shift Supplemental Pay: Overtime pay Performance bonus Yearly bonus Education: Diploma (Required) Experience: Plastics injection molding: 5 years (Preferred) Language: English (Required) Location: Dera Bassi, Punjab (Preferred) Work Location: In person

Position Overview: We are looking for a strategic and hands-on Planning Manager to lead our planning and production coordination activities within our fabrication unit. This role requires a strong background in project-based fabrication environments , with a sharp focus on resource optimization, on-time delivery, and interdepartmental coordination . The Planning Manager will play a critical role in driving operational excellence , ensuring seamless integration between engineering, procurement, production, and client delivery schedules. Key Responsibilities: ✅ Master Planning & Scheduling Prepare and manage Master Production Schedules (MPS) in alignment with project timelines and client deadlines. Convert engineering drawings into fabrication-ready plans with timelines, resource charts, and milestones. ✅ Resource & Capacity Planning Plan and allocate manpower, material, and machinery based on daily/weekly production targets. Monitor shop floor loading and optimize capacity utilization across departments. ✅ Interdepartmental Coordination Act as the central point of coordination between Design, Procurement, Quality, and Production teams. Track material status, pending approvals, and drawing releases to avoid delays. ✅ Monitoring & Reporting Maintain and update detailed project trackers , fabrication dashboards, and daily production reports. Identify critical path activities and provide early warnings on potential bottlenecks or deviations. ✅ Client & Stakeholder Interaction Communicate effectively with clients and project managers on timelines, delays, and production status. Participate in client meetings and reviews to present fabrication progress and planning strategies. ✅ Continuous Improvement Drive improvements in planning systems using tools like Lean, 5S, Kaizen, or Six Sigma . Implement KPIs for planning effectiveness, resource efficiency, and schedule adherence. Required Qualifications: B.E./B.Tech in Mechanical/Industrial/Production Engineering or equivalent. 5–10 years of proven experience in production/fabrication planning, preferably in heavy fabrication, structural steel, or EPC project environments. Strong proficiency in MS Excel, MS Project, AutoCAD, and ERP (SAP/Oracle/Custom) . Solid understanding of fabrication workflows , welding, cutting, assembly, surface treatment, and dispatch. Key Skills & Competencies: Excellent planning, prioritization, and execution skills. Deep understanding of technical drawings (GA, shop drawings, BOQs) . Ability to lead planning meetings and engage confidently with shop supervisors, engineers, and clients. Proactive problem-solver with a results-driven mindset . Strong documentation, reporting, and analytical abilities. Preferred: Certification in Project Management (PMP/Prince2) or Lean Manufacturing . Experience in modular fabrication, PEB, pipe fabrication , or industrial project execution . Work Details: Location: Tatibandh, Raipur (C.G) Working Days: 6 Days a Week (Mon–Sat) Salary: Commensurate with experience and industry standards Type: On-site / Factory-based role Why Join Us? Be part of a fast-growing engineering and fabrication company with cutting-edge projects. Work closely with cross-functional experts and contribute to end-to-end project execution . Drive innovation in production control, material planning, and lean manufacturing practices. Job Types: Full-time, Permanent Pay: From ₹25,000.00 per month Ability to commute/relocate: Amanaka, Raipur, Chhattisgarh: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a skilled Lathe Manufacturing Engineer to oversee and optimize the operation, programming, and process development of CNC and conventional lathe machines. The candidate will be responsible for improving productivity, ensuring part quality, and supporting production through robust machining processes and tooling. Key Responsibilities: Develop and optimize CNC turning processes for precision components (tool paths, cycle time, surface finish, tolerance control). Create and modify CNC programs (Fanuc, Siemens, Mitsubishi, etc.) and validate first-off parts. Select appropriate tools, inserts, holders, and cutting conditions for turning operations. Conduct time studies and improve cycle time (CT) by adjusting RPM, feed rate, and depth of cut. Resolve machining issues including chatter, tool wear, runout, and dimension deviations. Collaborate with design, quality, and production teams to ensure manufacturability. Support new product development (NPD) by defining turning process plans and tooling. Implement best practices in workholding, tool life monitoring, and coolant management. Conduct root cause analysis for part defects and drive corrective actions. Support TPM and preventive maintenance schedules related to lathe equipment. Maintain detailed documentation ( SOPs, process sheets, inspection reports ). Required Skills: In-depth knowledge of CNC lathe operations (2-axis to multi-axis, sliding head, etc.) Hands-on experience with insert grades, tool selection, and cutting data optimization. Knowledge of G-code, M-code, and CNC programming. Experience with process improvement tools (Lean, Kaizen, 5S, etc.) Ability to interpret mechanical drawings, GD&T, and tolerance stack-up. Familiarity with inspection methods using Vernier, Micrometer, CMM, etc. Educational Qualification: Diploma / B.E. / B.Tech in Mechanical Engineering or Production Engineering Preferred Qualifications (Optional): Experience with Tsugami, Citizen, Star, or similar machines. Knowledge of CAM software (Espirit or Similar) Exposure to automation in turning (robot loading, bar feeder, etc.) Knowledge of ERP systems for job routing and tool tracking. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are looking for a well-organized and proactive engineer to manage the CNC tool store and tool inventory system , ensuring smooth and efficient tool availability for CNC machines. The role includes tool procurement planning, stock control, issuing/receiving tools, and coordination with production and maintenance teams to reduce downtime and tool-related issues. Key Responsibilities: Tool & Store Management: Maintain inventory of cutting tools, inserts, holders, collets, sleeves, gauges, and fixtures. Issue and receive tools based on production requirements using proper documentation. Track tool consumption, life, and usage per machine/component. Ensure proper storage, labelling, and handling of tools to prevent damage. Coordinate with Purchase/vendors for tool procurement and regrinding services. Maintain regrinding cycles, tool sharpening records, and scrap tool tracking. Maintain minimum stock levels and initiate timely reordering of tools. Monitor tool cost per component and suggest cost-saving alternatives. Process & Technical Support: Work closely with CNC programming and production teams to ensure correct tooling as per the process plan. Update and control master tool list, tool drawings, and technical datasheets. Assist in tool trial and validation for new components. Monitor tool performance and suggest changes for productivity improvement (tool life, cycle time). Record tool breakage and analyses root cause for improvements. Manage offline tool presetting if applicable. System & Documentation: Use ERP/MES/tool management software for issuing, tracking, and reporting tool data. Generate reports on tool usage, tool life, tool cost, and pending procurement. Implement 5S and safety practices in the tool store area. Maintain tool room logbooks, calibration records for gauges, and equipment audits. Qualifications: Diploma or bachelor’s degree in mechanical / production engineering. 2–5 years of experience in tool store/tool management in a CNC machining environment. Knowledge of CNC tools, insert grades, tool holders, and tool identification. Familiarity with machining processes: turning, milling, drilling, boring, tapping, etc. Ability to read and understand tooling diagrams and machining drawings. Experience with ERP software or digital tool management systems (e.g., Zoller, TDM, WinTool) is a plus. Preferred Skills: Knowledge of tool costing, vendor management, and regrinding practices. Experience with tool presetters or offline tool setting systems. Understanding of cutting tool technologies (ISO coding, grades, coatings). Proficiency in MS Excel, inventory tracking systems, and report generation. Good organizational and communication skills. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Purpose: To set, operate, and maintain CNC sliding head lathes to produce precision components as per engineering drawings and specifications, ensuring high quality and production efficiency. Key Responsibilities: Machine Setting: Set up and adjust sliding head CNC lathes for new production batches. Load correct programs and fine-tune offsets for optimal machining. Select and install appropriate tools, collets, and fixtures. Conduct first-off inspection and ensure parts meet dimensional accuracy. Operation: Operate machines to produce parts per schedule. Monitor machine operation and part quality during production runs. Maintain cycle time, tool life, and part consistency. Adjust machine settings in-process as needed. Maintenance and Troubleshooting: Perform routine maintenance (coolant top-up, cleaning, basic lubrication). Troubleshoot minor machine or tooling issues. Report major faults or breakdowns to the maintenance team. Quality and Documentation: Perform in-process and final inspection using micrometres, vernier callipers, and other precision instruments. Maintain production and inspection records. Follow quality and safety protocols as per company standards. Process Improvement: Suggest improvements to reduce cycle time and tool wear. Support continuous improvement and 5S practices on the shop floor. Required Skills and Qualifications: ITI / Diploma in Mechanical or Production Engineering. 2+ years hands-on experience in setting and operating sliding head lathes (e.g., Citizen, Tsugami, Star). Strong knowledge of G-code and CNC program understanding. Ability to read and interpret engineering drawings. Skilled in using measurement instruments like micrometres, vernier callipers, dial gauges. Basic knowledge of tool geometries and insert selection. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a skilled and detail-oriented Manufacturing Engineer to oversee and optimize the ultrasonic cleaning process used in our production line. The ideal candidate will ensure efficient, safe, and high-quality cleaning of parts/components through the ultrasonic cleaning systems. Key Responsibilities: Develop, implement, and optimize ultrasonic cleaning processes for metal, plastic, or composite components. Maintain appropriate cleaning chemicals, frequencies, power settings, and cycles for different product requirements. Collaborate with design, quality, and production teams to establish cleaning specifications and standards. Set up and validate ultrasonic cleaning machines and equipment. Monitor process performance and adjust parameters to ensure consistent cleanliness and minimal residue or contamination. Conduct root cause analysis and resolve issues related to cleaning defects or equipment malfunctions. Train operators and technicians on cleaning processes, maintenance routines, and safety practices. Maintain documentation for standard operating procedures (SOPs), work instructions, and quality reports. Work closely with the quality assurance team to meet internal and customer cleanliness standards (e.g., particle count, surface residue). Recommend improvements in process flow, equipment layout, and automation for increased efficiency. Coordinate with vendors for procurement and maintenance of ultrasonic cleaning equipment. Qualifications: Diploma or bachelor’s degree in mechanical engineering, Manufacturing Engineering, or related field. 2–5 years of experience in a manufacturing environment with exposure to cleaning or surface preparation processes. Hands-on experience with ultrasonic cleaning systems and related equipment (e.g., filtration, rinsing, drying units). Knowledge of cleaning chemistry, materials compatibility, and surface finish standards. Familiarity with ISO 16232, VDA 19 or other cleanliness evaluation standards is an advantage. Strong problem-solving, documentation, and communication skills. Experience with lean manufacturing and continuous improvement tools (5S, Kaizen, FMEA, etc.) preferred. Desirable Skills: Understanding of part contamination sources and mitigation. Familiarity with automation or robotics used in cleaning lines. Basic knowledge of PLC or control systems related to ultrasonic cleaners. Ability to interpret engineering drawings and cleanliness requirements. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Purpose: To manage and optimize ultrasonic cleaning processes used in the preparation of precision components by ensuring cleanliness standards, process stability, and production efficiency are consistently achieved. Key Responsibilities: 1. Production Operations: Supervise daily ultrasonic cleaning operations and manpower. Ensure all components are cleaned as per standard operating procedures (SOPs). Monitor cleaning cycle parameters such as temperature, time, frequency, and detergent concentration. Maintain cleanliness levels as per industry or customer-specified requirements (e.g., particle count, NVR limits). 2. Process Control & Optimization: Establish and maintain process parameters for different product families. Continuously monitor and improve cleaning cycle efficiency, chemical usage, and water consumption. Develop and implement process improvements to reduce cycle time, reject rate, and chemical costs. Validate new processes or materials before production scale-up. 3. Equipment Maintenance: Coordinate with maintenance for periodic servicing and preventive maintenance of ultrasonic tanks and related equipment (e.g., RO units, filters, dryers). Monitor equipment health and troubleshoot any abnormalities (e.g., heating failure, cavitation issues, or transducer damage). 4. Quality & Documentation: Ensure cleaning validation records, process logs, and inspection reports are properly maintained. Support quality audits and implement corrective actions related to cleaning issues. Coordinate with the Quality team for cleanliness testing (e.g., gravimetric analysis, Millipore testing). 5. EHS & Compliance: Ensure proper handling and disposal of chemicals and waste water as per safety and environmental guidelines. Train operators on chemical handling, PPE usage, and emergency procedures. Implement and enforce 5S and safe work practices in the cleaning area. Required Skills and Qualifications: Diploma / B.E / B. Tech in Mechanical / Chemical / Production Engineering. 2+ years of experience in ultrasonic cleaning or similar surface treatment processes. Good understanding of ultrasonic cleaning principles, chemical compatibility, and contamination control. Experience working with RO/DI water systems, dryers, and filtration systems. Ability to interpret cleanliness specifications and inspection standards. Desirable Skills: Experience in medical, aerospace, or semiconductor industry cleaning standards. Knowledge of ISO 14644 (cleanroom), ISO 16232 (cleanliness in automotive), or similar cleanliness standards. Basic knowledge of Lean Manufacturing and Six Sigma tools. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

1. Production & Fulfillment Management: Oversee end-to-end production operations for photo albums, prints, frames, and other customized products. Ensure timely order processing by optimizing Turnaround Time (TAT) and maintaining high On-Time Delivery (OTD) rates. Plan and execute efficient job batching, manpower allocation, and machine utilization. Collaborate closely with Sales and Customer Service teams to ensure production priorities align with business goals. 2. Team & Resource Management: Lead and manage a cross-functional team of production staff, technicians, print operators, and packaging personnel. Forecast manpower requirements based on dynamic order volumes and seasonal trends. Take ownership of hiring, onboarding, training, and performance management through clearly defined KPIs. 3. Process Optimization & Quality Assurance: Develop, implement, and monitor SOPs for each stage of the production process. Drive continuous improvement initiatives to reduce rework rates, minimize errors, and improve overall workflow efficiency. Establish in-line and post-production quality checkpoints with robust feedback mechanisms. 4. Inventory & Vendor Management: Monitor inventory levels for all raw materials including paper, ink, frames, and packaging supplies. Ensure Just-in-Time (JIT) procurement by coordinating closely with vendors and the procurement team. Prevent material shortages or excesses through accurate forecasting and stock rotation. 5. Data-Driven Performance Management: Maintain and analyze reports/dashboards for key operational metrics such as daily production output, wastage, manpower utilization, and SLA compliance. Use data insights to make informed decisions and implement corrective actions as required. Required Skills & Qualifications: 5–8 years of proven experience in manufacturing, operations, or warehouse management. Strong leadership background with experience managing teams of 15–30+ employees. Hands-on experience with operational tools such as Excel, Google Sheets, and ERP systems. Excellent organizational and problem-solving abilities. Familiarity with lean manufacturing, 5S, or Six Sigma principles is a plus. Strong communication and collaboration skills to work across cross-functional teams. Key Skills: Production Planning & Control Turnaround Time (TAT) Optimization On-Time Delivery (OTD) Management Lean Operations / Process Improvement Team Leadership & KPI Management Inventory Control & Vendor Coordination Quality Assurance & SOP Implementation Data Analytics & Operational Reporting ERP & Excel/Google Sheets Proficiency Manpower Forecasting & Resource Allocation Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Work Location: In person Expected Start Date: 20/07/2025

Key Responsibilities: Interpret engineering drawings ,blueprints and CAD designs to build and repair tools and dies. Operate a variety of machine tools,including lathes,grinders ,milling machines and EDM machines . Modify dies and tooling to conform to engineering changes. Check component dimensions using gauges and basic instruments. Maintain daily production logs and follow process discipline. Ensure cleanliness and proper handling of forged components. Follow safety procedures and wear appropriate PPE during machine operation. Identify basic machine faults and inform the maintenance team. Learn and implement 5S and Kaizen practices on the shop floor. Eligibility Criteria: Education: ITI (Fitter / Tool & Die ) or Diploma or Tool Engineering Experience: Freshers (0–1 year). Prior training in a manufacturing environment is an advantage. Skills Required: Basic mechanical aptitude and understanding of manufacturing processes. Willingness to work in rotating shifts. Ability to handle physical workload in a production setup. Positive attitude and eagerness to learn forging operations. Benefits: Hands-on technical training in cold forging Career progression and promotion opportunities Statutory benefits (ESI, PF, Bonus, etc.) & Uniform Subsidized canteen food Contact: Name : Sivakumar Ph.No : 9362863197 Job Types: Full-time, Permanent, Fresher Benefits: Food provided Health insurance Provident Fund Work Location: In person

Job Description: We are looking for a technically skilled and enthusiastic Operations Trainee to join our manufacturing team. This trainee role is ideal for candidates with foundational knowledge and hands-on experience in welding, turning (lathe operations), and mechanical fitting. The selected candidate will be trained in end-to-end manufacturing operations, including production planning, process monitoring, quality assurance, and shop floor coordination. This role offers a pathway to future leadership in plant operations or production management. Key Responsibilities: Assist in the daily management of production floor activities, with focus on welding, turning, and fitting sections. Learn to coordinate tasks across fabrication, machining, and assembly units. Work with senior operators and supervisors to monitor workmanship, productivity, and adherence to technical drawings. Support material handling, job scheduling, and maintenance of machine utilization records. Inspect basic weld joints, machined components, and assembled parts for quality and dimensional accuracy. Ensure adherence to safety protocols, 5S standards, and preventive maintenance schedules. Participate in troubleshooting mechanical issues related to parts alignment, fitting accuracy, and welding defects. Help implement process improvements and waste reduction initiatives under guidance. Skills & Competencies: Basic practical knowledge of: o Welding techniques (MIG, TIG, Arc) o Lathe and turning operations o Mechanical fitting and assembly Ability to read and understand engineering drawings and technical specifications. Strong analytical, communication, and coordination skills. Willingness to work in a shop floor or fabrication environment. Familiarity with quality checks, measurement tools (calipers, micrometers), and safety guidelines. Qualifications: ITI / Diploma / B.Tech in Mechanical, Fitter, Welding, or Production Engineering. 0–2 years of experience in a manufacturing or metal fabrication environment (internship or vocational training acceptable). Practical workshop/lab experience in welding, turning, or fitting is highly preferred. Job Types: Full-time, Permanent, Fresher Pay: ₹200,000.00 - ₹300,000.00 per year Benefits: Food provided Schedule: Day shift Fixed shift Work Location: In person

Job Description: We are looking for a technically skilled and motivated Supervisor Trainee to join our manufacturing operations team. The ideal candidate should have a strong foundation in welding, turning, and mechanical fitting, and a desire to grow into a leadership role. This trainee role is designed to provide on-the-job learning and leadership development to prepare the candidate for a future supervisory or team lead position in a manufacturing environment. Key Responsibilities: Support the supervision of daily shop floor activities, especially in welding, machining (turning), and mechanical fitting sections. Learn to allocate work, monitor operator performance, and manage shift schedules and manpower. Assist in overseeing weld quality, machining accuracy, and assembly fitment based on engineering drawings and tolerances. Participate in quality inspections, and help implement corrective actions for process deviations or defects. Monitor material flow and availability, and coordinate with stores and planning teams for job readiness. Maintain production records, daily shift reports, and operator logs under supervisor guidance. Ensure adherence to workplace safety protocols, 5S practices, and preventive maintenance schedules. Learn to lead a small team and resolve day-to-day technical and operational challenges. Skills & Competencies: Working knowledge of: o Welding techniques (MIG, TIG, Arc) o Lathe/turning machine operations o Mechanical fitting and assembly Ability to read and interpret mechanical drawings, symbols, and dimensions. Strong communication, leadership potential, and a problem-solving attitude. Basic understanding of shop floor documentation, quality checks, and production planning. Willingness to work in shifts and on the shop floor in an industrial setting. Qualifications: ITI / Diploma / B.Tech in Mechanical, Production, Fitter, or Welding Technology. 1–2 years of relevant hands-on experience in a manufacturing/fabrication unit preferred. Fresh graduates with strong technical skills and workshop/lab exposure are also welcome. Job Types: Full-time, Permanent, Fresher Pay: ₹200,000.00 - ₹300,000.00 per year Benefits: Flexible schedule Food provided Schedule: Day shift Fixed shift Work Location: In person

We’re Hiring | Production Manager – Sofa Division Location: Hosur, Tamil Nadu Industry: Furniture Manufacturing (Premium Sofa & Upholstery) Are you a production expert with deep experience in sofa manufacturing ? We are looking for a hands-on Production Manager to lead our sofa division at our Hosur facility and drive quality, efficiency, and innovation on the shop floor. Key Responsibilities: Oversee end-to-end production planning and execution Manage daily operations across framing, upholstery, stitching & assembly Ensure adherence to quality standards, cost control, and safety protocols Lead a team of engineers, supervisors, and skilled floor staff Implement Lean Manufacturing , 5S, and continuous process improvement Coordinate with design, procurement, and stores for timely raw material availability Maintain production MIS, TAT, and compliance documentation What We’re Looking For: 10–15 years of experience in furniture/sofa manufacturing Strong leadership in managing cross-functional teams Hands-on knowledge of framing, foam, fabric, and finish quality Familiar with SAP, MS Office , and production metrics Exposure to Lean, Six Sigma , and ISO practices preferred Willingness to travel and manage vendor coordination when required Role Level: Manager / Functional Head Salary: Negotiable based on experience Apply now – Send your resume to hemarathna.r@elevateindia.co Contact: 9840474643 Be a part of a company committed to craftsmanship, innovation, and quality in the furniture industry. #ProductionManager #FurnitureManufacturing #SofaProduction #HosurJobs #ManufacturingLeadership #HiringNow #LeanManufacturing #UpholsteryJobs #ElevateIndia #OpenToWork Job Type: Full-time Pay: Up to ₹700,000.00 per year Benefits: Health insurance Provident Fund Application Deadline: 28/07/2025 Expected Start Date: 28/07/2025

Justification of the Position: This position is being hired to focus on quality aspects essential for the automation and service business. The role will oversee and ensure compliance with quality requirements and standards across both Automation and Service Business. Purpose of Position: The Quality Manager is responsible for managing, establishing and maintaining quality methodologies and systems and quality assurance and control practices that drive customer quality improvements and ensure compliance with regulatory requirements Additionally, this role oversees the Quality Management System (QMS) including standards such as ISO 9001:2008, ATEX, MID, BIS, and other regulatory requirements that may be introduced over time, supporting operations at both the Coimbatore and Mumbai locations. Key Responsibilities: Drive Quality Standards across the organization ensuring adherence. Accomplishes quality assurance objectives by monitoring, reviewing, and enforcing policies and procedures. Validates quality processes by establishing product specifications and quality attributes. Ensure that PPM levels are maintained within the specified targets both internally and externally. Prepares quality documentation and reports by collecting, analyzing, and summarizing information and trends. Respond to customer complaints putting in containment actions, full analysis, poka-yokes (error proofing), and implementing short-term and long-term countermeasures Education & Experience : The ideal candidate will have Total Experience in years: 11 – 13 Years Graduation/ Degree: BE Mechanical Post-Graduation/ PGDM: MBA(Operations Management) or M.Tech (Quality Management) Mandatory Certifications Required: Six Sigma Green or Black belt and ISO or TS 16949 auditor Other preferred courses/ certifications: ATEX & UL Certifications Background and Skills: Bachelor’s degree in engineering with 11 – 13 years of experience in Quality Assurance Should be B.E Mechanical or Electronics Engineering Certified Internal or Lead Quality Auditor for ISO 9001:2015 Knowledge and experience in tools like; PPAP, 5S, FMEA, Calibration, 8D, 7QC tools, Standard Work, DM, MRB, Policy Deployment and Visual Management Ability to drive to factual root cause and identify appropriate short and long-term countermeasures. Strong people and communication skills, analytical skills, and a commitment to continuous improvement efforts also essential, along with the ability to coach, and lead individuals and teams. Ability to work without close supervision. Proficient at the use of MS office applications including Word, Excel, and Access. Knowledgeable in the use of computers and cameras Good Knowledgeable in SAP – QM Module Good facilitation/communication skills to work with individuals and training others Knowledge and understanding of Employee Involvement and Team Development skills Six sigma green belt / black belt will be added advantage for this profile WHO IS GILBARCO VEEDER-ROOT Gilbarco Veeder-Root, a Vontier company, is the worldwide technology leader for retail and commercial fueling operations, offering the broadest range of integrated solutions from the forecourt to the convenience store and head office. For over 150 years, Gilbarco has earned the trust of its customers by providing long-term partnership, uncompromising support, and proven reliability. Major product lines include fuel dispensers, tank gauges and fleet management systems. WHO IS VONTIER Vontier (NYSE: VNT) is a global industrial technology company uniting productivity, automation and multi-energy technologies to meet the needs of a rapidly evolving, more connected mobility ecosystem. Leveraging leading market positions, decades of domain expertise and unparalleled portfolio breadth, Vontier enables the way the world moves – delivering smart, safe and sustainable solutions to our customers and the planet. Vontier has a culture of continuous improvement and innovation built upon the foundation of the Vontier Business System and embraced by colleagues worldwide. Additional information about Vontier is available on the Company’s website at www.vontier.com. At Vontier, we empower you to steer your career in the direction of success with a dynamic, innovative, and inclusive environment. Our commitment to personal growth, work-life balance, and collaboration fuels a culture where your contributions drive meaningful change. We provide the roadmap for continuous learning, allowing creativity to flourish and ideas to accelerate into impactful solutions that contribute to a sustainable future. Join our community of passionate people who work together to navigate challenges and seize opportunities. At Vontier, you are not on this journey alone-we are dedicated to equipping you with the tools and support needed to fuel your innovation, lead with impact, and thrive both personally and professionally. Together, let’s enable the way the world moves!

As a Quality Patrol (Inspector) in a plastics injection molding company, your primary responsibility is to ensure that molded plastic parts meet the required quality standards during and after production. With one year of experience, you will be expected to carry out routine in-process and final inspections of components by checking for visual defects such as short shots, flashes, burn marks, and surface imperfections. You will also verify basic dimensional accuracy using standard measuring tools like Vernier calipers, micrometers, and gauges. You will be responsible for recording inspection results, identifying non-conforming parts, and promptly reporting any quality issues to the supervisor or quality engineer. Supporting the production team in preventing the recurrence of defects through clear communication is also an essential part of your role. You will follow established inspection plans, work instructions, and quality procedures to ensure consistency and compliance with customer requirements. Additionally, maintaining proper handling and cleanliness of measuring instruments, assisting in organizing inspection-related documentation, and adhering to workplace safety and 5S practices are part of your day-to-day duties. This position requires attention to detail, a proactive attitude, and a strong sense of responsibility to uphold product quality and contribute to overall process improvement. Job Type: Full-time Pay: ₹16,000.00 - ₹25,000.00 per month Benefits: Food provided Health insurance Life insurance Provident Fund Work Location: In person

Job Title: Engineer Production Location India - Sriperumbudur (INTNSRI) About Us Toshniwal Instruments (Madras) Pvt Ltd – An Ingersoll Rand Business was established to empower our customers’ Industrial & Chemical Vacuum needs and provide them with Innovative Cost-Saving Engineering Solutions. The company started climbing up the corporate ladder as a pioneer in upgrading industrial technology, creating infrastructure and supplying world-class process Vacuum systems. Research and development formed the core of the competence. We are one of the largest vacuum system manufacturers of Oil Rotary vane pump Technology. Job Summary: Production Engineer will be responsible for overseeing and improving manufacturing processes, ensuring smooth production flow, quality standards, and timely output. Works closely with cross-functional teams to resolve issues, optimize efficiency, and support continuous improvement on the shop floor. Responsibilities: Create daily/weekly/monthly production orders based on demand, sales plan, or work schedule. Allocate and schedule assembly line activities according to production priorities. Supervise and guide the assembly team to meet production targets and quality standards. Ensure availability of materials, tools, and manpower before order execution. Coordinate with the planning and stores department for timely material issuance. Implement standard operating procedures (SOPs) and work instructions on the assembly floor. Report daily production metrics: output, downtime, rejection, and efficiency. Ensure that assembled products meet quality standards and are free from defects. Coordinate with Quality Control for in-process and final inspections. Ensure compliance with 5S, safety, and lean manufacturing principles. Maintain documentation for traceability and audits. Identify areas for productivity improvement and participate in Kaizen/Lean activities. Basic Qualifications B.Tech./B.E. or equivalent degree in Mechanical Engineering from a reputed university Bachelor's Degree: Mechanical Engineering. Production / Industrial Engineering. Electrical/ Electronic Engineering. 4-8 years of experience in Industrial/Pump Product Engineering. Language to read & write: English & Tamil/(Mandatory), Hindi (Optional) Travel & Work Arrangements/Requirements Travel on Need based, The candidate to have his own Two-Wheeler. Have their own travel arrangement to come to the factory daily. No Transport facility is available. What we Offer Subsidised Food Breakfast and Lunch will be offered. We are all owners of the company! Stock options (Employee Ownership Program) that align your interests with the company's success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashments. Maternity/Paternity Leaves. Employee Health covered under Medical, Group Term Life & Accident Insurance. Employee Assistance Program. Employee development with LinkedIn Learning. Employee recognition via Awardco.

a) Knowledge in sheet metal stamping and welding process. b) Knowledge in preparation of production planning, allocation of machine, allocation of man power, capacity analysis, reporting production data. c) Awareness in quality systems standards like ISO 9001 /IATF 16949 Standards d) Adherence of production control like control plan, operation standard, TPM, OEE, MTTR, MTBF, work environment, management of production tooling and manufacturing, test, inspection tooling and equipment, 5S, etc. e) Adherence of production planning, scheduling, execution on time and ensure compliance f) Preparing record of production, production department Quality objectives, on-the-job training, and achieve those targets and awareness on Quality Policy g) Identifying the continuous improvements areas and implementation of the same. Qualification : B.E/ DME in Mechanical Experience : Minimum 5 / 7 years’ experience in sheet part production or in an Automotive Industry Note : Able to join within 1 week to 10 days Job Type: Full-time Benefits: Food provided Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person Expected Start Date: 28/07/2025

Key Responsibilities: Material Handling & Storage: Receive, inspect, and physically verify incoming materials. Ensure proper storage and handling of materials as per SOP. Maintain stock as per FIFO / LIFO norms. SAP Transactions: Create GRN (Goods Receipt Note) in SAP for received items. Post issue slips, stock transfer, and material return entries in SAP. Monitor stock levels using SAP MM module. Inventory Management: Perform daily, weekly, and monthly stock reconciliation. Conduct physical verification of inventory and coordinate audits. Identify slow/non-moving and obsolete inventory. Documentation & Compliance: Maintain inward/outward registers, inspection reports, and gate pass records. Ensure documentation complies with ISO/quality standards. Coordinate with QA/QC, procurement, and accounts teams. Dispatch & Logistics Coordination: Arrange packaging and dispatch as per work orders or customer POs. Prepare delivery challans and coordinate with transport vendors. Safety & Housekeeping: Maintain 5S practices in the store area. Follow EHS (Environment, Health & Safety) protocols. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹18,000.00 per month Benefits: Health insurance Paid sick time Paid time off Provident Fund Application Question(s): Ensure the applicant has relevant industry experience Experience: 2D animation: 1 year (Preferred) Language: English (Preferred) Shift availability: Day Shift (Preferred) Work Location: In person

Job Title: Assembly Production Engineer Industry: Sheet Metal Fabrication (Panel, Server Rack, Control Panel Manufacturing) Location: Plot No. 30, Ecotech 12, Greater Noida 201308 Experience Required: 3–5 Years Department: Production / Assembly Key Responsibilities: Supervise and manage assembly operations for sheet metal products such as server racks, LT panels, control panels, etc. Plan and execute the daily production schedule for the assembly line Ensure on-time production targets while maintaining quality standards Interpret and work as per Bill of Materials (BOM), engineering drawings, and SOPs Ensure proper use of tools, jigs, fixtures, and assembly equipment Handle manpower planning, line balancing, and resource allocation efficiently Conduct in-process inspections and ensure quality at every stage of assembly Identify and resolve assembly issues like fitment problems, wiring mismatches, or component defects Maintain compliance with 5S, Kaizen, Lean Manufacturing, and safety norms Coordinate with Design, Quality, PPC, and Stores teams for smooth workflow Suggest and implement continuous improvements for productivity and cost savings Train assembly workers and helpers to follow standard work procedures Required Skills & Qualifications: Diploma / B.Tech in Mechanical, Production, or Electrical Engineering Minimum 3 years of hands-on experience in assembly within the sheet metal fabrication industry Ability to read and interpret engineering drawings, wiring layouts, and BOMs Proficiency in MS Office, ERP software, and production reporting tools Strong problem-solving and team leadership skills Knowledge of ISO/TS quality systems is preferred Familiarity with safety standards and lean tools like 5S, Kaizen, etc. Preferred Attributes: Experience managing shop floor workers and production teams Ability to work under pressure and meet strict deadlines Practical understanding of torque tools and assembly torque standards Continuous improvement mindset Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Flexible schedule Health insurance Leave encashment Provident Fund Experience: Assembly Supervisor: 3 years (Required) Work Location: In person

Proficient in Conducting Chemicals Analysis Process (Concentration Testing, Density Testing, HulCell Testing, DM water Testing) Proficient in Documentation & Trouble Shooting of Alkline & Acid Zinc. Proficient in improving production efficiency, ensuring safety compliance, and implementing cost-effective solutions. Knowledge of Automotive Industry core tools (5s, Kaizen, Pokayoke, Time Study, etc.) Powder Coating. ecoating Supervision Chemical Testing Lab PT Line Tank, Supervision Zinc Plating Process Supervision. Nickle Plating Supervision. Requirements : - Graduate in Chemical Engineering - B.Sc /B-tech Relevant experience in powder coating / Zinc Plating / Nickle Plating/e-coating/ultrasonic Etc. Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Leave encashment Work Location: In person