47 3D Models Jobs - Page 2

Job brief We need a proficient Junior Architect to join our team! In this position, you will be responsible for planning and designing buildings while keeping in mind the needs of the project. Responsibilities:- - Assist in developing architectural designs and concepts. - Prepare detailed drawings, plans, and 3D models using design software. - Collaborate with senior architects and project managers on project planning. - Conduct research on materials, building codes, and regulations. - Coordinate with contractors, engineers, and other stakeholders. - Participate in site visits and inspections to monitor project progress. - Support the preparation of presentations and client proposals. - Ensure compliance with project timelines and budgets. Requirements - Bachelor's degree in Architecture or a related field. - Proficiency in design software such as AutoCAD, Revit, and SketchUp. - Strong understanding of architectural principles and building codes. - Excellent communication and teamwork skills. - Ability to manage multiple tasks and meet deadlines. - Attention to detail and a creative mindset. - Willingness to learn and adapt to new challenges. - Previous internship or work experience in architecture is a plus. 5+ years of relevant work experience in commercial and residential high & low rise buildings in the architectural field.

Candidate should have minimum 5years of experience in Pre Engineered Building - PEB construction as a Detailer/Modellar- TEKLA structures Key Responsibilities: Modeling & Drafting: Use Tekla Structures software to develop accurate and detailed 3D models for structural components, including steel, concrete, and other materials. Prepare fabrication drawings, assembly drawings, erection drawings, and connection details from the 3D models. Ensure all models and drawings are in compliance with project specifications, codes, and standards. Collaboration: Work closely with the structural engineering team, project managers, and other stakeholders to ensure project requirements are met. Assist in the review and coordination of design changes and modifications to ensure the correct information is represented in the Tekla models and drawings. Coordinate with the fabrication and construction teams to ensure accuracy in the detailing process. Quality Control: Review and check the accuracy of Tekla models and drawings for compliance with project requirements and relevant codes. Perform clash detection and resolve issues related to conflicts or discrepancies within the model. Ensure drawings are error-free and that all necessary information, such as dimensions, annotations, and material specifications, are included. Project Support: Support the engineering team in preparing and updating project documentation, including construction drawings and reports. Ensure timely completion of drawings and models in accordance with project schedules. Assist in preparing and maintaining project-specific standards for detailing and modeling. Continuous Improvement: Stay up-to-date with the latest Tekla Structures features and best practices to continuously improve efficiency and output quality. Provide feedback and suggestions for improvements in the detailing processes or tools. Documentation and Reporting: Maintain accurate records of all project-related drawings, models, and revisions. Assist in preparing status reports on the progress of detailing and modeling tasks.

We need injection Moulding Designer.Responsibilities: Product Design Analysis: Analyze product designs and determine feasibility for injection molding production. Identify potential design issues that could affect moldability and manufacturability. Suggest design modifications to optimize the molding process and product quality. Mold Design and Development: Design injection molds using computer-aided design (CAD) software, ensuring dimensional accuracy and adherence to engineering standards. Develop a comprehensive mold design that includes mold components (gates, runners, cores, cavities, etc.) and considers factors like material flow, cooling systems, ejection mechanisms, and parting lines. Perform mold flow analysis to optimize runner design, gate placement, and wall thickness for balanced filling and minimal shrinkage or warping. Collaboration and Communication: Collaborate closely with product designers, engineers, and manufacturing personnel to ensure the mold design meets all functional and production requirements. Effectively communicate complex technical concepts through drawings, reports, and presentations. Mold Design Documentation: Prepare detailed mold design documentation, including 2D drawings, 3D models, and assembly instructions. Develop and maintain a bill of materials (BOM) for all mold components. Additional responsibilities may include: Participating in mold prototyping and testing processes. Troubleshooting mold design issues and implementing corrective actions. Staying up-to-date with the latest advancements in injection molding technologies and materials.

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient Technical Knowledge

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required.

Responsibilities Create detailed 3D models of jewellery designs using CAD software. Collaborate with designers to develop and refine jewellery concepts. Ensure accuracy and feasibility of designs for manufacturing processes. Generate technical drawings and specifications for production. Maintain up-to-date knowledge of jewellery design trends and techniques. Provide feedback and recommendations to improve design efficiency. Qualifications Bachelor's degree in Jewellery Design, Product Design, or a related field. Proven experience as a Jewellery CAD Designer. Strong portfolio showcasing jewellery design skills and CAD proficiency. Familiarity with jewellery manufacturing processes in Local Market. Excellent attention to detail and precision. Skills CAD software (e.g., Rhino, Matrix) 3D modeling Technical drawing Jewellery design Attention to detail Creativity Collaboration Should have knowledge of Matrix

Senior Unity Developer - AR/VR & 3D Gaming Experience: 5 - 18 Years Exp Salary : USD 2,727-4,545 / month Preferred Notice Period : Within 30 Days Shift : 10:00AM to 7:00PM IST Opportunity Type: Remote Placement Type: Contractual Contract Duration: Part-Time, 12 Months (*Note: This is a requirement for one of Uplers' Clients) Must have skills required : 3d models, DOTween, High-level shader language (HLSL), unirx, unitask, Unity development, Unity UI (uGUI), C# Good to have skills : AR/VR, Excellent Communication, VR headsets Pre-seeded Volumetric content creation platform (One of Uplers' Clients) is Looking for: Senior Unity Developer - REMOTE who is passionate about their work, eager to learn and grow, and who is committed to delivering exceptional results. If you are a team player, with a positive attitude and a desire to make a difference, then we want to hear from you. Role Overview Description Position: Senior Unity C# Developer (Mobile) We are looking for an experienced Unity developer to join our team. What we expect from you is a strong knowledge of C#. Our product is a cutting edge technology which requires knowledge of math, matrices, algebra and 3D geometry. Experience in working with MAUI is good to have. Are you experienced in these subjects? Do you think I know how to tackle this when you see a complex and challenging task? Then apply for the Job opening at our company. Our company stands out for its product-focused approach to development and close integration of developers into a distributed team. The direct involvement allows them to influence technical decisions, code quality, and the final product. We value diligence, initiative, ability to write bug-free code, and ideas that contribute to product development. Where and how you can work: remotely from any country under a contract as an individual, coordinating common working hours with the team. You can work part-time. Working languages on projects: English, Russian. Responsibilities: Develop modules for recording, processing, and playing animations involving point clouds. Create programs for mesh generation. Implement systems for data compression/decompression and network communication. Write native plugins for various device components. Create tests for different code blocks in the project. Participate in testing hypotheses and third-party solutions. Work with lighting and sound in virtual scenes. Write clear, maintainable, and performant C# code. Contribute to project architecture design. Implement UI layouts in Unity based on Figma designs. Develop networking code for backend interaction. Qualifications and Skills: Minimum 5 years of Unity development experience. Strong knowledge of C# and the Unity game engine. Portfolio of released game projects. Understanding of OOP, SOLID principles, data structures, and basic algorithms. Experience building flexible and scalable project architectures. Integration experience with various SDKs in Unity3D projects. Familiarity with vector algebra. Strong communication skills. Ability to independently solve problems. Understand existing codebase and work with it. Goal-oriented and energetic team player with a strong work ethic and positive attitude. Ability to tackle complex problems with creative and thoughtful solutions. Adaptability to new domains. Full working proficiency in the English language: effectively communicating with colleagues, understanding documentation, studying additional technical literature. Good to have: Basic familiarity with shaders and application optimization methods. Required Tech Stack: Unity UGUI UniRx, UniTask GitLab DOTween HLSL, C# .Net How to apply for this opportunity: Easy 3-Step Process: 1. Click On Apply! And Register or log in on our portal 2. Upload updated Resume & Complete the Screening Form 3. Increase your chances to get shortlisted & meet the client for the Interview! About Our Client: We are pioneers in the development of volumetric video technology, transforming the digital landscape by blending the boundaries between virtual and reality. Our mission is to bring holograms from the realms of fantasy into the tangible world and make 3D volumetric content creation accessible to everyone. We are revolutionizing how users interact with and experience digital media through immersive environments and lifelike avatars. About Uplers: Our goal is to make hiring and getting hired reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant product and engineering job opportunities and progress in their career. (Note: There are many more opportunities apart from this on the portal.) So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you!

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Situational Adaptability Manages Complexity Being Resilient Technical Knowledge

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review xand documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Accountability Technical Knowledge

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Teamwork Communication Technical Knowledge Accountability

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Fixture Design - Team Lead Experience and Qualification: - BE / Diploma in Mechanical Engineering from recognised institute or equivalent 6-10 years experience in Fixture Design in Automotive or off-highway equipment engineering Working as Checker and Team Lead Handling the project independently Ability to work and lead on Concept Design, Design Execution, Detailing of Various types of fixtures especially MIG welding Fixtures. Ability to understand machining and manufacturing drawings of Fabrication, Sheetmetal, assembly. Ability to design & detailing using Creo in MBD ( Model Based Definition ) & Windchill. Ability to create 3D models and update existing 3D models of Automotive components and aggregates in Creo. Experience in conduct ing Technical Review with customer Preparing and checking of engineering specifications for tasks and new products. Integrate with design team and other cross functional teams to understand the task

AECOM is seeking a Designer - Civil 3D to be based inBengaluru, KA, India. Candidates will be responsible for the following activities: Civil 3D and CAD Specialist with 2+ yearsof experience in the Water utilitiesfield. Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements. Candidate must have working experience in Civil 3D and AutoCAD tools in Utility projects. Good knowledge in common Data Environment(CDE) such as project wise, BIM 360, ACC. Experience with developing reports and presentations. Excellent interpersonal and communication skills for individual interactions and in group settings. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team.

AECOM is seeking a Senior Designer - Civil 3D based inBengaluru, KA, India. Candidates will be responsible for the following activities: Civil 3D and CAD Specialist with 6+ yearsof experience in the Water utilitiesfield. Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements. Candidate must have working experience in Civil 3D and AutoCAD tools in Utility projects. Good knowledge in common Data Environment(CDE) such as project wise, BIM 360, ACC. Experience with developing reports and presentations. Excellent interpersonal and communication skills for individual interactions and in group settings. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team.

Product Development.Responsibilities: Product Design and Development: Develop and design new products or improve existing products based on project requirements and specifications. Create detailed 3D models, 2D drawings, and technical specifications using CAD software. Conduct feasibility studies and design reviews to ensure product manufacturability and performance. Design and perform tests on prototypes. Conceptualization and Innovation: Generate innovative design concepts and solutions to meet project objectives. Research and evaluate new materials, technologies, and manufacturing processes. Stay updated on industry trends and advancements in design and engineering. Technical Documentation: Create and maintain accurate technical documentation, including design specifications, drawings, and reports. Prepare bills of materials (BOMs) and ensure accuracy of design documentation. Document design changes and revisions. Collaboration and Communication: Collaborate with cross-functional teams, including product management, manufacturing, and quality assurance. Communicate design concepts and technical information effectively to stakeholders. Provide technical support and guidance to manufacturing and production teams. Design Analysis and Optimization: Conduct design analysis, including stress analysis, thermal analysis, and fluid dynamics analysis, to ensure product performance and reliability. Optimize designs for cost, manufacturability, and performance. Perform tolerance analysis and ensure design accuracy. Prototyping and Testing: Develop and build prototypes for design validation and testing. Conduct functional testing and performance evaluations of prototypes. Analyze test results and implement design modifications as needed. Manufacturing Support: Provide technical support during the manufacturing process to ensure design integrity. Assist in the development of manufacturing processes and tooling. Address design-related issues and provide solutions to manufacturing challenges.

Job Title : Design R&D Engineer - Automobile Company : JSW Gecko Motors Pvt Ltd Location : Chandigarh Department : Research & Development (R&D) Reports To : Chief Technical Officer / Sr. Manager Job Type : Full-time Salary Range : Commensurate to experience, qualification, skills and expertise Job Summary: We seek a highly motivated and innovative Design R&D Engineer to join our Research and Development team. The ideal candidate would play a crucial role in conceptualizing, designing, and testing automotive components and systems, focusing on improving vehicle performance, safety, aesthetics, and sustainability. This role offers an opportunity to work on cutting-edge automotive technologies and contribute to the next generation of vehicle designs in the extreme mobility domain. Key Responsibilities: Conceptual Design & Development: Lead the design of new automotive components and systems (e.g., powertrain, chassis, interior, exterior). Work closely with other engineers to develop pragmatic solutions that meet customer needs, regulatory requirements, and cost constraints. Develop 3D models and CAD drawings for new designs using industry-standard software (e.g., CATIA, SolidWorks, NX). Prototyping & Testing: Collaborate with the testing team to prototype, validate, and refine new designs. Understand test results from simulations, and physical tests to ensure designs meet performance, safety, and durability standards. Perform failure mode and effect analysis (FMEA) to anticipate potential issues and improve design reliability. Conduct Root-cause investigation of any failure found in testing. Design Optimization: Analyze and optimize the design of vehicle systems and components for weight, cost, fuel efficiency, safety, manufacturing, and service feasibility. Identify and implement design improvements based on testing results, customer feedback, and industry trends. Cross-functional Collaboration: Collaborate with engineers in other departments (e.g., procurement, manufacturing, quality control) to ensure design integrity and physical integration with other vehicle systems. Work closely with suppliers and vendors to source components and materials that meet design and quality specifications. Research & Innovation: Stay up-to-date with emerging automotive technologies, trends, and materials, and integrate these advancements into new vehicle designs. Drive innovation in electric vehicles (EVs), autonomous driving systems, and other future-focused automotive technologies. Documentation & Reporting: Prepare and maintain detailed design documentation, including specifications, reports, and design reviews. Ensure compliance with relevant regulatory and industry standards, and provide necessary documentation for certification processes. Support to prepare user manuals and service literatures. Required Qualifications: Education : Bachelors or Masters degree in Mechanical Engineering, Automotive Engineering, or a related field. Experience : 3+ years of experience in automotive design and development, preferably with hands-on experience in sheet metal and plastic parts. Strong knowledge of any vehicle systems and components, including experience in CAD design, prototyping, and testing. Skills : Proficiency in CAD software (e.g., CATIA, SolidWorks, NX). Adept with computers, MS Office. Strong understanding of automotive materials, manufacturing processes, and design optimization techniques. Knowledge of industry standards and regulations (e.g., ISO, SAE, EN, JIS). Excellent problem-solving skills and attention to detail. Strong communication skills and the ability to work collaboratively in cross-functional teams. Preferred Qualifications: Experience in electric vehicle (EV) or autonomous vehicle components design. Familiarity with advanced manufacturing techniques (e.g., 3D printing / additive manufacturing, composites (FRP), and Injection molding). Knowledge of Gasoline/diesel/Gas/hybrid/electric powertrain integration in vehicles. Experience with simulation tools for FEA (NX-CAE). Personal Attributes: Creativity and innovation in problem-solving. Ability to manage multiple tasks and meet deadlines in a fast-paced environment. A proactive approach to continuous learning and professional development. Be a Team player.

Component Engineer - ARA If you're looking for a career-defining challenge in the software industry, Aptiv is the perfect place for you. Our brand-new $14 million campus in Bangalore is our most ambitious software hub where you will shape the Future of Mobility. Join our 2,000-strong team to advance your career, grow and make a real difference. Your Role Component Selection, Obsolescence Management Provide component level expertise and consultation to Design Engineers Component Ownership (Requirements review, Selection, Usage and Issue addressing) of parts being used. Component Applications knowledge First hand analysis of Product team's specific requirements in selecting the right component for Customer RFQs. (Component & System) Conduct failure analysis/corrective action with suppliers. Analyze component failure trends. Design, Conduct, and document Qualification Tests of new electronic components considered for new designs. Manage / create standard component qualification processes where needed. Facilitate communication and interactions between suppliers and design teams. Assist in identifying and resolving manufacturing problems. Support purchasing team during negotiations, part creation BOM health management Perform Finite Element Analysis (FEA) to assess structural integrity and optimize component performance under various load conditions. Collaborate with suppliers to select appropriate materials for mechanical components, considering strength, weight, cost, and manufacturing capabilities. Develop and review technical documentation, including design specifications, test plans, and manufacturing instructions. Conduct Failure Mode and Effects Analysis (FMEA) and root cause analysis to identify and resolve design issues. Oversee the prototyping and testing of new components, ensuring they meet design requirements and pass validation tests. Lead cross-functional teams to address production and design challenges, ensuring timely delivery of products within budget. Manage the lifecycle of components, from concept to production, ensuring design changes are incorporated effectively. Your Background Minimum 2-7 years of experience as an a component engineer dealing with Mechanical components or Applications engineer. Expert in finding alternates suitable for designs Knowledge on Mechanical components such as Headers, connectors, screws nuts, bolts, or custom mechanical components such as brackets, TIM. Knowledge with product families and technology roadmaps. Technical knowledge on manufacturing, quality and reliability issues related to mechanical components. Knowledge of ESD, MSL, RoHS, and REACH electronic component compliance Experience in preparing customer and/or management level briefings. Create detailed 3D models, technical drawings, and specifications for mechanical components using CAD software (e.g., SolidWorks, CATIA, AutoCAD). Lead the design and optimization of mechanical parts, assemblies, and systems while ensuring they meet project specifications and performance standards. Ensure designs adhere to manufacturing and assembly constraints, and contribute to the development of design for manufacturability (DFM) guidelines. Understanding of the complete lifecycle of mechanical components, from initial concept through design, prototyping, testing, production, and end-of-life. Gap analysis of test results and validation of components to ensure they meet required performance criteria, including stress testing, fatigue testing, and environmental testing. Coordinate with manufacturing teams to ensure timely production and delivery of components. Address and resolve design and production issues, including troubleshooting and root cause analysis. Provide technical support to other departments as needed, including production and quality assurance teams. Prepare and present technical documentation, including design specifications, test reports, and manufacturing instructions. Collaborate with suppliers to evaluate and select components and materials, ensuring quality, cost, and lead-time considerations are met. Evaluate the performance of suppliers and drive improvements in product quality and delivery. Ensure all components meet the quality standards, regulatory requirements, and industry specifications. Conduct Failure Mode and Effects Analysis (FMEA) to identify potential risks and mitigate them during the design phase. Implement continuous improvement initiatives in the design and manufacturing process to reduce costs and improve efficiency. Strong understanding of mechanical design principles, material science, and manufacturing processes. Experience with Geometric Dimensioning and Tolerancing (GD&T) and tolerance analysis. Proficient in component lifecycle management and design for manufacturability (DFM). Familiarity with quality control processes and industry standards (e.g., ISO, ASTM). Strong problem-solving skills and the ability to perform root cause analysis. Desired Education: Bachelors or Masters in Mechanical Engineering or Automotive engineering. Strong understanding of Mechanical Engineering & manufacturing processes. Why join us? You can grow at Aptiv. Aptiv provides an inclusive work environment where all individuals can grow and develop, regardless of gender, ethnicity or beliefs. You can have an impact . Safety is a core Aptiv value; we want a safer world for us and our children, one with: Zero fatalities, Zero injuries, Zero accidents. You have support . We ensure you have the resources and support you need to take care of your family and your physical and mental health. Your Benefits at Aptiv: Hybrid and flexible working hours; Higher Education Opportunities (UDACITY, UDEMY, COURSERA are available for your continuous growth and development) Life and accident insurance Sodexo cards for food and beverages Well Being Program that includes regular workshops and networking events EAP Employee Assistance Access to fitness clubs (T&C apply) Creche facility for working parents

Create 3D models and technical drawings using SolidWorks. Required: Engineering degree, CAD software proficiency Required Candidate profile We are hiring Solidwork Designer for kundli, Sonipat Haryana And Sheetmatel industry & Fabrication industry Exp -5 to 7 yrs

Job Description Design Engineer (BIW Fixtures) Industry: Automobile (Electric Vehicle EV) Department: Production, Manufacturing & Engineering Employment Type: Full Time, Permanent Role Category: Engineering Roles and Responsibilities: Design and Development: Create and develop Body-in-White (BIW) fixture designs using CATIA software. 3D Modeling & Detailing: Develop and maintain accurate 3D models of fixtures, including assembly and disassembly sequences . Collaboration: Work closely with cross-functional teams to ensure fixture designs meet manufacturing and production requirements . Feasibility Analysis: Conduct feasibility studies on new fixture designs to enhance and optimize production processes. Compliance & Standards: Ensure all designs adhere to quality standards, safety norms, and regulatory requirements . Process Optimization: Contribute to improving efficiency, precision, and cost-effectiveness of fixture designs. Required Qualifications & Skills: Education: B.Tech/B.E. in Automobile, Production/Industrial, or Mechanical Engineering . Software Proficiency: Expertise in CATIA for fixture design. Technical Knowledge: Understanding of BIW components, GD&T, manufacturing processes, and tooling . Problem-Solving: Strong analytical and problem-solving skills to optimize design and production efficiency. Team Collaboration: Ability to work in a fast-paced, team-oriented environment. Preferred Experience: Prior experience in BIW fixture design, EV industry, or automotive manufacturing will be an advantage. Knowledge of welding, jigs, and fixture development .

Create 3D models and 2D drawings of plastic injection moulds using Unigraphics (UG NX). Develop mould designs for automotive components considering material properties, part geometry, and manufacturing feasibility. Technical Expertise: Perform mould flow analysis and incorporate necessary design modifications. Optimize designs for manufacturability and cost-effectiveness. Develop core and cavity splits, slides, lifters, and other critical mould elements. Work closely with product design, production, and tooling teams to ensure design accuracy and alignment with production requirements. Coordinate with clients for design approval and resolve technical challenges.