123 3D Modelling Jobs - Page 5

Performing 2D & 3D modelling, detailing/drafting and related work including technical drawings, quality control, project coordination/communication and structural analysis if capable. Technical guidance and mentoring to engineers and technical modelers. Guide and review work done by other drafters/detailers and junior engineers. Responsible for quality and timely delivery of own work including budget control. Participate and contribute to project design reviews and discussions. Qualifications Diploma, Civil Engineering Graduate or Postgraduate from reputed engineering college or technical institute. Minimum 5 years of detailing/drafting experience. Hands on experience of modelling and drafting with AutoCAD, Revit and/or Tekla Experience in Revit is mandatory. Experience in precast detailing & steel shop drawings is preferred. Europe and particular Sweden project experience is required. Design experience with RC structures, steel structures, steel connection design, and timber structures, as well as knowledge of Eurocodes, is preferred. Design experience with prestressed systems/elements and precast concrete is a plus. Excellent communication skills in English are required.

The Design Head will lead the design team for Solar Power projects, ensuring innovative, cost-effective and high-performance solar solutions. This role involves overseeing the entire design lifecycle from concept to execution. While ensuring compliance with industry standards, safety regulations and client requirements. The ideal candidate will have deep expertise in Solar PV system design, strong leadership skills and a passion for renewable energy. Key Responsibilities: 1. Design & Engineering Leadership: Lead the design and development of solar PV systems (rooftop, ground-mounted, floating, hybrid, etc.). Review and approve technical drawings, layouts, SLDs (Single Line Diagrams), and BOM (Bill of Materials). Ensure designs comply with national/international standards (IEC, NEC, IEEE, etc.). Optimize system performance, efficiency, and cost-effectiveness. 2. Project Management & Co-ordination: Collaborate with cross-functional teams (EPC, procurement, construction, O&M) for seamless project execution. Oversee feasibility studies, site assessments, shadow analysis and solar studies to ensure optimal site planning, daylight access and compliance with local building regulations and environmental guidelines. Manage design timelines, budgets, and resource allocation. 3. Technology & Innovation: Stay updated on emerging solar technologies (bifacial modules, trackers, BESS integration). Drive R&D initiatives to improve system efficiency and reduce LCOE (Levelized Cost of Energy). Evaluate new software tools (PVsyst, AutoCAD, Helioscope, ETAP). 4. Team Management: Mentor and develop a high-performing design engineering team. Foster a culture of innovation, quality, and continuous improvement. 5. Compliance & Quality Assurance: Ensure adherence to safety, environmental, and grid compliance norms. Conduct design reviews and risk assessments. Liaise with external stakeholders (utilities, clients, consultants). Education: Bachelors/Masters in Electrical/Mechanical/Renewable Energy Engineering. Experience: 10+ years in solar PV design, with 5+ years in leadership roles. Technical Skills: Expertise in PV system design, earthing, cable sizing, inverter selection. Proficiency in AutoCAD, PVsyst, ETAP, SKETCHUP, or similar tools. Knowledge of structural load calculations and mounting structures. Soft Skills: Strong leadership, problem-solving, and communication abilities. Preferred Certifications: NABCEP PV Design Specialist. PMP (Project Management Professional). Certified Solar PV Designer. Familiarity with BIM tools and digital twin modelling. Location : Perungudi, Chennai

Hi, Greetings!! Grab an opportunity of open position of Manager Engineering Design position @ esteemed organization PEPL. URL https://petromek.in Job Description: Position: -Manager Engineering (Design) Mechanical Valve & interlock Industry @ Pune, Viman Nagar (Maharashtra) Education: - BE / B.Tech in Mechanical Experience: - 8+ years' experience in Valve Design Notice Period- immediate -45 days. Working Days- 5 Payroll- Direct. Skills required as below Team Management, Work Allocation & Reporting. Knowledge & Experience: - 3D Modelling, (Part Design, Assembly) Drafting (Software AutoCAD, SolidWorks / CREO) NPD Design & Development Development and Calculation Expert Standard material Expert knowledge of valves, P & ID and Process Project or Site work knowledge. Other qualities required: - Good communication skill Salary: Depend on interview/ Hike on current salary Location: Pune(Viman Nagar), Maharashtra Interested & experienced job seekers kindly share your updated resume as well as mentioned your below details at official email Id of hr@petromek.in Total Work Exp.: Relevant Exp.: Updated Resume: Current CTC in hand: Expectation in hand: If offer in hand: Notice Period: Current Location: Passport No. if available: Regards, HR: Mail: hr@petromek.in Mob: +91 9545553214

Qualification : B.E / B.Tech. in Instrumentation Engineering or related field. Experience : 1 to 3 years in Industry experience (Fertilizer/Petrochemical/oil and gas plants) Software Proficiency : Proficient in CAD Tools such as AutoCAD, SPI-INTOOLS, AVEVA - E3D, and 3D Model review software. Responsibilities: 1. Obtain and assimilate relevant design input from Lead Engineer and other project stakeholders, incorporating it into deliverables. 2. Ensure preparation of design deliverables in compliance with applicable Codes & Standards. 3. Coordinate promptly with other Engineering disciplines for seamless project integration. 4. Check and review all documents/drawings before release at any Revision status. 5. Assist lead in Work planning, progress monitoring, and adherence to scheduled completion of engineering documents. 6. Collaborate with the Lead Engineer and support departmental functions effectively. 7. Apply knowledge of standards, codes, engineering tools, and software in daily tasks. 8. Utilize instrument sizing software and analyze Piping/Civil Structural & other discipline drawings. 9. Select instrument hook-up standards for different types of Instruments. 10. Familiarity with Microsoft Office suite for documentation and reporting. Additional Skills: 1. Strong communication and collaboration skills for effective team coordination. 2. Ability to work independently and in a team environment to meet project deadlines. 3. Analytical thinking and problem-solving abilities for resolving technical challenges. 4. Knowledge of instrument calibration, loop checking, and commissioning processes. 5. Understanding of safety standards and regulations related to instrumentation and control systems. 6. Continuous learning mindset to stay updated with industry trends and advancements. 7. Familiarity with Quality, Environmental, Health, and Safety (QEHS) standards and regulations is a plus

Key Responsibility Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the air conditioning drawings. Maintain the daily record of the work done including time sheet. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills- Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: Water and air-cooled chiller plant. Constant volume air handling plant. Variable air volume air handling systems Fan coil systems Package and split systems Supply and extract ventilation. Smoke control systems. Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting / 3D modeling packages, spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Ability to read, understand, visualise and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Mechanical engineering / ITI Full time Course along with: Approved training in Air Conditioning Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience 8 to 10 years engineering experience with at least 5 years in the preparation of air-conditioning construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries would be an advantage. Minimum 2 years of experience in Revit and 3D modelling Site experience in installation / execution would be an advantage.

Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Electrical services with the building layouts and other services. Ensure that the drawings should comply all the requirements pertaining to the presentation, neatness and aesthetic view. Ensure that the drawings are prepared within the productivity norms. Responsibilites- Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Plumbing & Fire Fighting drawings with the civil and architectural layouts. Co-ordinate the Plumbing & Fire Fighting services with the Air- Conditioning, and Electrical services, including preparation of multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the Plumbing & Fire Fighting drawings. Maintain the daily record of the work done including time sheet. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Plumbing & Fire Fighting systems for major commercial and light industrial buildings in the GCC. The services would include the following systems: External underground drainage systems. Soil and waste pipe works systems. Sanitary ware and bathroom fittings. Rain water surface water drainage Hot and cold water services. Fire Protection Systems LPG / SNG etc systems Fuel Oil Systems Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting / 3D modeling packages, spreadsheets and databases. Detailed design ability to undertake pipe work sizing and pump duty calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Ability to read, understand, visualise and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Mechanical / Civil engineering / ITI Full time Course along with: Approved training in Plumbing / Fire Fighting Trade Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of Plumbing / Fire Fighting construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries would be an advantage. Minimum 2 years of experience in Revit in 3D modelling Site experience in installation / execution would be an advantage.

They need to be proficent in these three main areas - 3D modelling, 3D texturing, 3D Animation & 3D Layout. Softwares they need to use is Autodesk Maya. I don't need any other skills. These are the only ones I will be looking at. Location- Remote, Delhi NCR, Bangalore, Chennai, Pune, Kolkata, Ahmedabad, Mumbai, Hyderabad 3 yrs experience atleast - SHOWREEL is a must

Job Summary We are looking for a highly creative and skilled 3D and Motion Graphic Designer to join our team. The ideal candidate will have a strong passion for storytelling through design and animation, combining cutting-edge 3D modeling with visually compelling motion graphics. You will work closely with our creative team to deliver high-quality visuals that captivate and engage our audience. Key Responsibilities Conceptualize, design, and create 3D models, animations, and motion graphics for various media, including advertisements, social media, presentations, and video content. Collaborate with the creative team to develop design concepts and storyboards based on project requirements. Design and animate dynamic motion graphics using software like After Effects, Blender, or Cinema 4D. Develop photorealistic textures, lighting, and rendering to enhance the quality of 3D assets. Integrate motion graphics seamlessly with live-action footage and other multimedia assets. Stay updated with the latest design trends, tools, and techniques in 3D and motion graphics. Manage multiple projects simultaneously while meeting deadlines and maintaining quality standards. Optimize 3D assets and animations for various platforms and formats. Qualification: Technical Skills Proficiency in 3D software like Blender, Cinema 4D, Maya, or equivalen Expertise in motion graphics tools such as Adobe After Effects and Adobe Premiere Pro. Knowledge of texturing and rendering tools like Substance Painter, Redshift, or Arnold. Familiarity with graphic design tools like Adobe Photoshop and Illustrator. Experience with video editing and compositing. Strong understanding of typography, color theory, and visual storytelling. Soft Skills Exceptional creativity and attention to detail. Strong communication and collaboration skills. Ability to take constructive feedback and iterate on designs. Effective time management and organizational skills. Preferred Skills Experience with AR/VR and immersive media. Knowledge of real-time rendering engines like blender, 3D max, Unreal Engine or Unity. Experience in sound design and audio editing. Experience in Product Videos. What We Offer: Opportunity to work on exciting projects with a talented team. Access to professional development and learning resources. A creative and dynamic work environment.

Roles and Responsibilities: Production of drawings within appropriate timescale and to a high level of quality by following the specifications & calculations as per best Electrical and MEP engineering standards and practices. Drawings include the following but not limited to: o GFC o Shop Drawings o Elevation Layouts o As built Layouts o Coordination Layouts Ensure the quality of drawings is maintained as per international engineering standards with details on layers, dimensions, clearances, clashes, BOQ references are mentioned. Incorporation of accurate and appropriate details such as client and all project stakeholder names, approval and revision details, dates, drawing status, etc. on all the drawings. Filing and maintenance of all soft copies of drawings in the company archive for future reference and use. Preparing both rough sketches and detailed work with BIM, CAD & NAVIS systems Ability to perform design validation, clash identification and detection of services Performing calculations for materials and weight limitations. Submission and follow up for approval of all drawings with project team, PMC, client and consultant. Communicating with engineers, and incorporating knowledge gained into drawings. Preparing, reviewing and redrafting alongside the engineering team. Ensuring final designs are compliant with building regulations. Identifying and communicating potential design problems to the rest of the team. Quantifying all line items in the GFC, shop drawing or as built layout for the purpose of estimation, material requisition or project use. Carry out regular programme monitoring to identify changes in the status of the projects All jobs as assigned by MD Qualification & Preferred Skills BE/Diploma Engineer, with 3-4 year of experience Minimum 2 years experience in BIM & 3D modelling skills IT Skills MS Office proficient Experience in Google Workspace preferred. Excellent communication skills Excellent in documentation Can work independently

Roles and Responsibilities: Production of drawings within appropriate timescale and to a high level of quality by following the specifications & calculations as per best Electrical and MEP engineering standards and practices. Drawings include the following but not limited to: o GFC o Shop Drawings o Elevation Layouts o As built Layouts o Coordination Layouts Ensure the quality of drawings is maintained as per international engineering standards with details on layers, dimensions, clearances, clashes, BOQ references are mentioned. Incorporation of accurate and appropriate details such as client and all project stakeholder names, approval and revision details, dates, drawing status, etc. on all the drawings. Filing and maintenance of all soft copies of drawings in the company archive for future reference and use. Preparing both rough sketches and detailed work with BIM, CAD & NAVIS systems Ability to perform design validation, clash identification and detection of services Performing calculations for materials and weight limitations. Submission and follow up for approval of all drawings with project team, PMC, client and consultant. Communicating with engineers, and incorporating knowledge gained into drawings. Preparing, reviewing and redrafting alongside the engineering team. Ensuring final designs are compliant with building regulations. Identifying and communicating potential design problems to the rest of the team. Quantifying all line items in the GFC, shop drawing or as built layout for the purpose of estimation, material requisition or project use. Carry out regular programme monitoring to identify changes in the status of the projects All jobs as assigned by MD Qualification & Preferred Skills BE/Diploma Engineer, with 3-4 year of experience Minimum 2 years experience in BIM & 3D modelling skills IT Skills MS Office proficient Experience in Google Workspace preferred. Excellent communication skills Excellent in documentation Can work independently

Job Roles & Responsibilities Lighting layout Emergency lighting layout Fire Alarm layout Voice/ data layout. Earthing & Lightning protection Layout Power, Fire Alarm, Emergency Lighting, ELV schematics Electrical As-built drawings. Developing sketches into working drawings/details. Preparation of Electrical Installation Standard for Bus Bar,Power,Lighting, and Earthing. Coordinating with MEP services like Plumping, HVACs etc. to locate electrical equipment and providing cable tray & trunking routing. Providing builders work opening for electrical services. WORKED on DATA CENTRE projects Compulsory. Qualifications Diploma/ ITI 3- 5 years experience with mini 1-2 on Data Centre Minimum 2 years experience in BIM & 3D modelling skills AutoCAD.

Responsible for global project execution using Aveva E3D/PDMS software with sound knowledge on tool administration activity like new project set up, Catalogue/Specification, Database, IFC, PML programming skill etc. Responsibility also includes 3D model management and its exchange (intelligent) with internal and external partners like supplier, consortium partners, customer where partners may use same software for 3D model or a different software (Tekla, Inventor, Revit, Open plant etc.) to support project execution. Provide business solutions and support in the field of overall plant engineering in the various CAD and CAE tool landscape, data and document management, software support and development and ensures stability of the plant engineering CAD & CAE environment which helps meeting the project time schedule. oriented: Project execution with scope of 3D model in collaboration with project team, internal and external partners and end customer Responsible for defining, coordinating and performing the set-up of plant engineering tools (PDMS/E3D etc.) Development on CAD tools, to define the standard procedures & guidelines and catalogue maintenance to improve CAE plant engineering environment Is responsible for the realization of the solution (day to day user support on various engineering tools) with the required functionality by analyzing and solving the problem Coordination with the project team, IT, expert users, developers, to provide business solution timely Housekeeping activities / Morning check of running projects to make the project functional Collaboration & Coordination with the local business team and the global teams. Provide training to users on certain tool chains Controlling and executing tool development including preparation of requirement specification, tool selection, development, support & coordinate Tool migration / rollout Ability to coordinate with discipline tool experts and speakers for trouble shooting Coordinates to close LOPs (List of Open Points) or provide workarounds within a scheduled time period Focus on the software and IT aspects of the tools and coordinate with the disciplines for business requests Dimensions / KPIs Ontime solution delivery Reduction of downtime Efficient working environment External / Internal Contacts External: Customer, Supplier, Consortium Partner (For 3rd party 3D model), Tool vendor Internal: Projects Teams, Expert Users, IT Team. Competence Catalog Intercultural SkillsBasic Empathizing and interacting effectively with people from diverse cultural backgrounds. CommunicationAdvanced Active listening, understanding, clarifying and interpreting while interacting with others, using appropriate communication methods and adapting to different situations, personalities and communication styles. Teamwork and CollaborationAdvanced Working effectively with others on a common task, taking action by respecting the needs and contributions of others, contributing to and accepting collaborative decision-making. Software Development Basic Apply methods, principles and tools for detailed design, implementation and unit (module) testing. This includes know-how about modern software design principles, like Model-Driven Development, or Object-Oriented Design Basics. It covers also the handling of development tool sets like editors, configuration management etc. It also includes the interface to module testing and integration environments. We dont need superheroes, just super minds: B.Tech/B.E.in Mechanical Engineering Power plant / Oil & Gas Industry Experience BIM (Building Information Modeling) experience would be an advantage 6-15 years of experience in Aveva E3D/PDMS tool administration, Catalogue/specification handling, Development using PML programming. Additional programming skill like C#, .Net, Python would be an advantage

Position - Design Engineer Location - Satara Qualification - BE/B.Tech - Mechanical Skill - 3D Modelling, AutoCAD, Inventory, API 661, Mechanical Transmission, Structural Component, Packaged Equiment

We are hiring a Mechanical Design Engineer to work on concept-to-final design projects. The ideal candidate should have experience in mechanical design, power transmission systems, and product development, along with expertise in CAD tools, manufacturing processes, and prototyping techniques.Responsibilities: Lead mechanical design efforts from concept generation and feasibility studies to detailed design and documentation. Design and analyze power transmission systems, ensuring performance, efficiency, and reliability. Participate actively in the product development lifecycle, contributing mechanical expertise at each stage. Create detailed 2D and 3D designs, drawings, and specifications using CAD software. Apply knowledge of various manufacturing processes (e.g., machining, casting, molding, fabrication) to ensure designs are manufacturable and cost-effective. Develop and implement prototyping strategies to test and validate designs. Collaborate with cross-functional teams, including manufacturing, testing, and_ possibly_ other engineering disciplines. Troubleshoot design issues and implement effective solutions. Maintain accurate design records and documentation.

Execute Piping engineering of projects leading a dedicated team of 4 to 8 persons. This could be an entire small project or specific areas of a large project. (1) Single point of contact (SPOC) and accountability for quality and on-time delivery for piping activities of assigned Project/Area. (2) Participate in Design Reviews. (3) Undertake project related interactions with Onsite coordinator. (4) Support Piping Lead in preparing proposals and manhour estimates. (5) Support Piping Lead in providing manpower forecast and manpower gap analysis. Support Piping Lead in harmonising allocation of shared team members. (6) Support Piping Lead in project scheduling, including extension/re-baselining needs. (7) Support Piping Lead in Interdiscipline interfaces. (8) Support Piping Lead in Claims related to rework, extra work, idle time, etc. (9) Support Piping Lead in maintaining uniformity and enhancing efficiency of design philosophies via regular feedbacks and lessons learnt data. (10) Resolve queries/concerns of team members. EXPERTISE AND QUALIFICATIONS Knowledge Base / Soft Skills (1) Hands on experience in Piping deliverables like Plot Plan, Equipment Layout, Piping Layout, Piping MTO, Piping Isometrics, Pipe Supports. (2) Good understanding of 3D model based detail engineering, interfaces with 3D Admin. (3) Basic understanding of Piping stress analysis concepts. (4) Good understanding of Interdiscipline interfaces and coordination. (5) Familiarity with relevant codes and standards. (6) Good understanding of Brownfield / Turnaround / MOC projects involving interfaces with existing facilities. (7) Strong proficiency in MS Excel, MS Word, MS Power Point, MS Paint. (8) Good English communication skills - written and oral. Below experience will be an added advantage (a) Overall awareness and understanding of Project lifecycle, Piping detail engineering process, timelines and milestones. (b) Subcontracting. (c) Site posting experience during construction phase. (d) Working with Laser Scan Inputs. (e) Experience in Piping Material Specification and Valves procurement. (f) Working knowledge of 3D modelling.

Preparation and review of Instrumentation Engineering Deliverables like: 3D Modelling of Instruments Panels, 3D Modelling of Instrument Junction Boxes, 3D Modelling of Electrical Lighting, Hook up drawings, JB Wiring Drawings, Lighting layout & sections Grounding layout Loop drawings, Logic drawings, Cable tray/Conduit layout Instrumentation & JB Location layout. Designing & drafting assignments associated with Instrumentation like Equipment layouts, Cable schedule, Installation drawings & Hookup detail drawings, Fire & Gas, etc

Power electronics product design Develop detailed mechanical designs for power electronics products, including enclosures, mounting solutions, and cooling systems. Utilize CAD software to create 3D models and engineering drawings. Ensure compliance with industry standards and regulations. Skills Details Thermal Management Understanding heat dissipation, cooling methods, and thermal interface materials. Structural Analysis Perform stress analysis and ensure mechanical integrity of components and assemblies. Use FEA tools to evaluate and optimize design performance. Materials Science Choose appropriate materials based on thermal, mechanical, and electrical properties. Ensure material compatibility with product requirements and environmental conditions. CAD Software Proficiency Proficiency in CAD tools (e.g., SolidWorks, AutoCAD) for 3D modelling and detailed drawings. Manufacturing Processes Understanding of manufacturing techniques and designing for manufacturability and assembly. Mechanical Design for Reliability Designing products to endure mechanical stresses, vibrations, and ensuring reliability. Power Electronics Knowledge: Electrical Principles. Basic understanding of voltage, current, resistance, and power semiconductor devices. PCB Design Considerations. Familiarity with PCB design, impacts of mechanical design on PCB layout, and thermal/mechanical stress. Cooling Solutions for Electronics. Designing and integrating cooling solutions (e.g., heat sinks, thermal pads) and conducting thermal simulations. Electromagnetic Compatibility (EMC). Knowledge of EMC principles, shielding, and grounding techniques to minimize interference. Interdisciplinary Skills: Problem Solving. Addressing and solving complex design challenges involving both mechanical and electrical aspects. Communication. Effective communication with electrical engineers, manufacturers, and stakeholders. Simulation and Testing. Conducting testing and simulations to validate performance and making necessary design adjustments. Qualification: Bachelors or Masters degree in Mechanical Engineering 5-7 years of experience in mechanical design, preferably for power electronics or similar products. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Attention to detail and commitment to high-quality design.

Key requirements:- 1. Proficient in Creo Elements 2. Responsible for handling new part design integration on machines. 3. Responsible for making 3D model & manufacturing/installation drawings. 4. Responsible for handling daily work assigned by team leaders for production issues or NPD. 5. Responsible for drawing QC verification. 6. Responsible for generating new concepts based on team leader inputs. 7. The drawings of backhoe loader parts.

Senior Design Engineer (Other equivalent designations: Detailing Engineer / Project Design Engineer / Drafting Engineer / Senior Design Executive) We seek a Senior Design Engineer with education qualifications in Mechanical or Civil engineering and excellent written & verbal communication skills to join our Design team. The position will support projects in the APAC region, predominantly in Australia and New Zealand and will be aligned to Australian time 9 AM - 5:30 PM / India time (5 AM - 1:30 PM) Role Description: As a Senior Design Engineer, you will play a key role in supporting the design of FRP structures by assisting in drafting, creating 3D models, preparing fabrication drawings, and coordinating with team members to ensure successful project execution. This role offers an excellent opportunity to develop your skills in Steel/FRP detailing techniques and CAD software in a professional environment. Primary Responsibilities: Collaborate with project managers, engineers, and other stakeholders to understand project requirements, timelines, and specifications. Creating detailed fabrication drawings, including plans, elevations, sections, and isometric views, is essential for fabricating and constructing steel / FRP structures. Review and interpret technical drawings, blueprints, and specifications to ensure they align with design standards and project requirements. Work on verifying dimensions, tolerances, symbols, and annotations on drawings under the guidance of senior team members. Support the team in ensuring all connections between steel components are correctly designed and detailed, adhering to industry standards and codes. Participate in quality control processes by reviewing and checking drawings and models for accuracy and compliance with project specifications. Collaborate with structural engineers, architects, and other professionals to resolve design and detailing issues. Maintain proper documentation of all design changes, revisions, and communications related to drafting and detailing. Stay updated on CAD software's latest features and capabilities to enhance efficiency and productivity. Learn and adhere to relevant industry standards, building codes, and safety regulations. Skills Steel Structures Autodesk Advance Steel Computer-Aided Design (CAD)Industry standards Project Design FRP 3D Design AutoCAD 2D

Experience in electrical requirement in FPSO topside modules / Offshore installations Manage and Configure AVEVA E3D software Should have experience of latest version of AVEVA E3D modelling software E3D admin knowledge (creating / modifying catalogue of Electrical facilities) Monitor software performance and resolve technical issues. Understanding of Electrical Engineering principles Assist Electrical Design teams with the setup, configuration and use of Electrical tools Develop and enforce project specification standards, templates and work flows Collaborate with other disciplines (Piping / structure / Instrumentation etc.) to ensure project consistency. Ensure accurate 3D modelling of Electrical system such as cable trays with support, lighting, cables, Electrical equipments, Customisation of MDS support etc. Extraction of 2D drawings from 3D model in final deliverable format Provide Training on E3D functionality and workflow Familiar with MTO and weight reports extraction from model. Familiar with other software tools like AutoCAD, PDMS and other software will be an added advantage Walk-in Time : 9.00 am to 5.00 pm (10th) & 9.00 am to 3.30 pm (11th)

Planning, Engineering material handling projects, Electrical Layouts, Load Calculation, SLD, Power distribution, Illumination Earthing, MCC,VVFD, Transformer, OHE lines/HT cabling, Motor design PLC, SCADA,,BOM,Tender preparation,Design verification Required Candidate profile BE/ B. Tech 9 to 15 years of experience

Role & responsibilities Co-ordinate with design and development activities, Maintain an ISO Preferred candidate profile Candidate should complete at least Diploma , He should near by Thudyalur.

Greetings From INTELIZIGN! We have opening for Casting Product design with CATIA Experience. Work experience: 4 to 8 years Relevant Experience: Casting, Battery Pack/ emobility Tool Experience: Catia V5 Education: M.Tech / B.Tech in Mechanical / Automobile engineering Work Location: Pune Notice Period: 30 Days Roles & Responsibilities : Creation of the 3D Casting product design in CATIA Creation of Manufacturing drawing using CATIA drafting environment To perform FMEA and DFMEA Basic know how of FEM analysis Coordination with suppliers and cross functional team Work with 3D modelling software CATIA Good understanding of GD & T and application Component level test planning Skills : - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system Advanced knowledge of CATIA V5 is must, Good to have experience in OAS (Open Architecture System) and its integration into design process Problem-solving skills and creativity to develop innovative designs Teamwork and communication skills, as design projects are often interdisciplinary. Good knowhow of casting product design guidelines is must -Good analytical skills required