1386 3D Jobs - Page 9

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled and detail-oriented Civil Design Engineer to plan, design, and oversee civil engineering projects such as roads, bridges, buildings, drainage systems, and other infrastructure. The candidate should be proficient in design software and capable of delivering technically sound and cost-effective engineering solutions. Key Responsibilities: Prepare detailed civil engineering designs and drawings as per project requirements. Conduct feasibility studies, site assessments, and design calculations for civil structures. Develop layouts and design plans for roads, buildings, drainage, water supply, and earthworks. Use software such as AutoCAD, Civil 3D, STAAD Pro, or similar tools for 2D/3D modeling. Coordinate with architects, structural engineers, and site teams to ensure design accuracy. Ensure designs comply with industry standards, regulations, and client requirements. Assist in the preparation of BOQs (Bills of Quantities), cost estimates, and technical documentation. Review and revise drawings based on site feedback or design changes. Conduct inspections and provide engineering support during project execution.

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

candidate should have very strong visual, graphics design skills & be well-versed in the demands of learning content development for the online medium & good exp designing visually rich, creative proposals & pre-sales collaterals (POCs). Required Candidate profile Knowledge of Adobe Creative Suite eg.Photoshop, Illustrator, InDesign, Adobe Animate, After Effects, Premier, Adobe XD/Figma, 2D/3D & rapid dev tools like Articulate, Captivate, AI tools & awareness

As a 3D Artist, Video Editor, and Graphic Designer, you will be an integral part of our team based in Dubagga, Lucknow. Your role will involve utilizing your strong portfolio to showcase expertise in visual design, video editing, and 3D graphics. You will have the opportunity to create compelling graphics, edit videos, and design products across various platforms, all while collaborating with us to elevate our brand presence. Your responsibilities will include designing 3D assets, textures, lighting, rendering, animation, and rigging. Additionally, you will create engaging graphics for social media, websites, and print materials, as well as edit videos for marketing campaigns and social media platforms. Collaboration on creative concepts and projects will be a key aspect of your role, ensuring brand consistency across all media channels. To excel in this position, you should possess proven experience in 3D design, graphic design, and video editing. Proficiency in a range of 3D tools such as Maya, 3ds Max, Blender, Substance, Keyshot, Unreal Engine, and Twinmotion is essential. Expertise in Adobe Creative Suite, including Photoshop, Illustrator, Premiere Pro, and After Effects, is also required. Strong creative and technical skills, coupled with excellent communication and teamwork abilities, will enable you to thrive in this dynamic role. This is a full-time position with a day shift schedule, requiring your presence at our work location in Dubagga, Lucknow. If you are passionate about creating visually stunning designs, editing captivating videos, and contributing to innovative projects, we encourage you to apply and be part of our creative team.,

We are looking for a seasoned Engineering Manager to spearhead component development and drive process innovation at Rapsri Engineering Products Ltd. As Engineering Manager, you will play a pivotal role in bridging marketing insights with manufacturing feasibility, leading cross-functional teams from initial customer drawings to final PPAP approval. The ideal candidate will champion technology change, spearhead value engineering projects, and mentor a team of die and fixture designers. This role demands a blend of technical acumen in areas like tool and die design, solid modeling, and manufacturing process optimization, alongside strong leadership skills to foster collaboration and drive results. Your expertise will be crucial in reducing costs, enhancing quality, and boosting productivity across our manufacturing processes, including casting, machining, and plating of copper, brass, and bronze components. If you are passionate about engineering excellence and thrive in a dynamic manufacturing environment, we encourage you to apply and contribute to our continued success in supplying global OEMs. Responsibilities: Component Development & Design Lead cross-functional teams in converting customer drawings into detailed internal manufacturing drawings, ensuring alignment with GD&T and design for manufacturability (DFM) principles. Develop accurate and detailed solid models for dies, castings/forgings, and machined components using SolidWorks or similar CAD software. Establish and document comprehensive manufacturing processes for new component development, ensuring adherence to quality standards throughout the PPAP process. Approve all engineering documentation required for customer approval, including material specifications, process parameters, and quality control procedures. Manage the prototyping process, including material selection, prototyping and tolerance stack-up analysis, ensuring timely delivery of functional samples. Collaborate with marketing to assess manufacturing feasibility and provide accurate cost estimations for new and existing components. Process Innovation & Technology Change Management Identify and implement technology changes and process innovations to reduce manufacturing costs, improve product quality, and increase overall productivity. Lead value engineering and application engineering projects to optimize component designs and manufacturing processes. Implement statistical process control (SPC) and failure mode and effects analysis (FMEA) methodologies to identify and mitigate potential manufacturing risks. Oversee the implementation of lean manufacturing principles and value stream mapping to optimize production flow and reduce waste. Evaluate and implement automation technologies to improve efficiency and reduce manual labor in casting, machining, and plating processes. Stay abreast of industry best practices and emerging technologies in casting, machining, and plating, and implement relevant advancements within the organization. Tooling & Fixture Design Management Lead and mentor a team of die and fixture designers in the development of high-quality tooling and fixtures for casting, machining, and plating operations. Oversee the design and fabrication of dies for permanent mold casting, ensuring optimal performance and longevity. Manage the design and construction of machining jigs and fixtures to ensure accurate and repeatable machining operations. Ensure that all tooling and fixture designs comply with relevant safety standards and regulatory requirements. Implement and maintain a robust document control system for all tooling and fixture designs and related documentation. Manage tooling inventory and maintenance schedules to minimize downtime and ensure optimal performance. Quality Assurance & Compliance Ensure adherence to all quality control procedures throughout the manufacturing process, from raw material inspection to final product testing. Lead the PPAP (Production Part Approval Process) activities, ensuring that all required documentation is complete and accurate. Implement and maintain a robust document control system to ensure compliance with industry standards and customer requirements. Conduct internal audits to ensure compliance with quality management system requirements. Address and resolve any quality issues or non-conformances in a timely and effective manner. Utilize data analysis and statistical process control (SPC) techniques to monitor and improve process performance. Team Leadership & Mentoring Provide leadership and guidance to a team of engineers and designers, fostering a culture of collaboration, innovation, and continuous improvement. Mentor junior engineers and designers, providing technical guidance and support to help them develop their skills and expertise. Conduct performance evaluations and provide feedback to team members to support their professional development. Delegate tasks and responsibilities effectively, ensuring that team members have the resources and support they need to succeed. Promote a safe and positive work environment, encouraging open communication and teamwork. Conduct regular team meetings to communicate project updates, address challenges, and solicit feedback. General Expectations and Past Experiences: Possess a Bachelor's degree in Mechanical Engineering or a related field, coupled with 1015 years of experience in a manufacturing environment specializing in machining, casting, and plating. Demonstrated expertise in tool and die design, fixture design, and solid modeling using software such as SolidWorks and AutoCAD. Proven track record of leading cross-functional teams in component development, from initial concept to PPAP approval. In-depth knowledge of manufacturing processes, including casting (sand, permanent mold, continuous), machining (CNC milling, turning, grinding), and plating (copper, brass, bronze). Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) principles and their application in manufacturing drawings. Experience in implementing process innovation and technology change management initiatives to reduce costs, improve quality, and increase productivity. Exceptional leadership and communication skills, with the ability to effectively mentor and manage a team of engineers and designers.

Location - Bangalore, Qualification : Bachelor s degree in Aeronautical, Mechanical or Electrical Engineering. Master s degree will be considered as advantage Overall 2 to 5 years of experience in Airbus Electrical System Installation Experience- Proven capabilities to work as core team member and mentor for junior Engineers. -Hands on experience in working with onsite/Onshore and offshore models -2+ years of strong background in Airbus Electrical System Install ation rules and DMU knowledge -Good Knowledge and Experience working in different Airbus Programs. Such as, A320/A330/A350/A380 Process, Method and Tools is highly appreciated -Able to support quality check. -Good understanding and knowledge in below mentioned Airbus tools, methods & ProcessoAirbus SIDP/TDD standards Configuration Management EHI Concept design, primary and secondary flow Electrical bracket position, IP and UID proposal Full 3D DQN creat

Job Title: AR/VR Content CreatorExperience Level: 3+ YearsAbout the RoleWe are seeking a creative and technically skilled AR/VR Content Creator to join our team and bring immersive experiences to life. You will be responsible for designing, developing, and optimizing high-quality Augmented Reality (AR) and Virtual Reality (VR) content that captivates and engages users. This is a cross-functional role working closely with designers, developers, and product teams to push the boundaries of what s possible in immersive media.Key ResponsibilitiesDesign and develop interactive AR/VR experiences using platforms like Unity, Unreal Engine, Spark AR, or W ebXR.Create 3D models, animations, textures, and visual effects optimized for real-time rendering.Collaborate with developers an d UI/UX designers to integrate AR/VR content into applications or platforms.Prototype concepts quickly to test and iterate immersi ve ideas.Conduct usability testing and gather feedback to improve user experience.Ensure visual fidelity, performance, and cross -platform compatibility of immersive content.Stay updated with industry trends and emerging technologies in XR (Extended Reality).

We are looking for an experienced AR/VR Engineer to lead the design and development of immersive experiences across AR (augmented reality) and VR (virtual reality) platforms. This role requires deep technical expertise, strong problem-solving skills, and a proven track record of delivering high-quality XR applications. You will work closely with cross-functional teams to define architectures, optimize performance, and push the boundaries of what s possible in spatial computing. Key Responsibilities: Lead the architecture, design, and implementation of complex AR/VR applications using Unity or Unreal Engine.Build robust and scalable XR e xperiences across platforms such as Meta Quest, Apple Vision Pro, HoloLens, Magic Leap, HTC Vive, and mobile AR. Optimize 3D rendering performance, memory usage, and interactivity for real-time environments. Collaborate with 3D artists, designers, and UX researchers to deliver high-fidelity immersive interactions.Integrate sensors, spatial tracking, gesture input, hand tracking, and real-w orld mapping using ARKit, ARCore, OpenXR, or custom SDKs. Mentor junior engineers and contribute to technical strategy, toolset eva luation, and prototyping of future-forward XR solutions.Stay up to date with the latest AR/VR frameworks, hardware, and ecosystem developments.

Design Approver (A1020_ESI - ATA92 for A320/SA) Qualification: Bachelor s degree in Aeronautical, Mechanical or Electrical Engineering and Master s degree will be considered as advantage Overall, 8-12 years of experience in Airbus Electrical System Installation (ESI) Experience -Airbus DOA approver signature role for ATA 928/929 OR 923/924/925 in ESI perimeter. -Supports and advice in performing the concept studies and trade-of studies. -Propose and implement the improvements in terms of System Installation with impact on weight, lead-time, and cost. -Ensure the consistency between the Configured DMU and the design intent for Airbus design activities. -Network & liaise with a broad range of Airframe, Systems and Cabin sub-domains including Industrialization and Standardization. -Strong background in Airbus Electrical System Installation rules and DMU knowledge -Good Knowledge and Experience working in A320/SA Airbus Program; Process, Method, and Tools Knowledge in other Airbus programs E.g. A330/A350/A380 is added value. -Outstanding understanding and knowledge in below mentioned Airbus tools, methods & Process. oAirbus SIDP/TDD standards oConfiguration Management oESI Design - Concept; Primary and Secondary flow Fixed and Movable bracket proposition - IP and UID proposal Full 3D, A2D.RDR and DQN creation. Airbus check process (E.g., QC0, QC1 & QC2) Harness migration to CATIA V5. Harness Installation drawing creation. Knowledge in Proptol & data preparation for treatment (CIRCE-I)/ Core Elec. Knowledge of functional electrics & support activity. Good overview on COBOT tools, Core Elec, CIRCE-C and CIRCE-P.

Must be proficient in ECAD platforms: Capital Logic & Integrator, Capital Harness is also welcome. Extensive design experience o f designing circuit schematics and Engineering change management projects for Automotive. Good knowledge of connector inline topology and ground topology. Gather, interpret, and upload relative Technical Customer Documentation (TCDs) into Electrical Database. Expertise in circuit simulation, load calculations, Voltage drop calculations, fault findings & design solutions for failures. Ex perience of various change management processes like Engineering Change Requests etc. Cable definition - assign circuits, define c able gauge, stranding, insulation type, cable colour. Implementation of unique requirements for circuits as required to protect th e integrity of the signal (e.g. twisting, shielding, voltage rating, voltage drops, max resistance, specifying insulation type for temperature, dynamics, etc. 2D/3D MACD bridge synchronization. Create dev

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled Civil Engineer with AutoCAD expertise to support the design, drafting, and execution of civil engineering projects. The ideal candidate should be proficient in preparing detailed 2D/3D civil drawings, layouts, and design documentation using AutoCAD, while working closely with architects, engineers, and site teams. Key Responsibilities: Prepare detailed structural and civil drawings using AutoCAD and other design tools. Assist in planning and drafting layouts for buildings, roads, drainage systems, and utilities. Interpret architectural and engineering designs and convert them into working drawings. Ensure drawings are accurate, well-detailed, and compliant with relevant codes and standards. Coordinate with project managers, site engineers, and consultants for design updates and revisions. Assist in quantity estimation, BOQ preparation, and documentation. Maintain version control and update drawing logs. Visit sites as needed for measurements, verification, and coordination.

Job Summary: We are looking for a skilled and detail-oriented Civil Design Engineer to plan, design, and oversee civil engineering projects such as roads, bridges, buildings, drainage systems, and other infrastructure. The candidate should be proficient in design software and capable of delivering technically sound and cost-effective engineering solutions. Key Responsibilities: Prepare detailed civil engineering designs and drawings as per project requirements. Conduct feasibility studies, site assessments, and design calculations for civil structures. Develop layouts and design plans for roads, buildings, drainage, water supply, and earthworks. Use software such as AutoCAD, Civil 3D, STAAD Pro, or similar tools for 2D/3D modeling. Coordinate with architects, structural engineers, and site teams to ensure design accuracy. Ensure designs comply with industry standards, regulations, and client requirements. Assist in the preparation of BOQs (Bills of Quantities), cost estimates, and technical documentation. Review and revise drawings based on site feedback or design changes. Conduct inspections and provide engineering support during project execution.

Job Summary: We are looking for a skilled and detail-oriented Civil Design Engineer to plan, design, and oversee civil engineering projects such as roads, bridges, buildings, drainage systems, and other infrastructure. The candidate should be proficient in design software and capable of delivering technically sound and cost-effective engineering solutions. Key Responsibilities: Prepare detailed civil engineering designs and drawings as per project requirements. Conduct feasibility studies, site assessments, and design calculations for civil structures. Develop layouts and design plans for roads, buildings, drainage, water supply, and earthworks. Use software such as AutoCAD, Civil 3D, STAAD Pro, or similar tools for 2D/3D modeling. Coordinate with architects, structural engineers, and site teams to ensure design accuracy. Ensure designs comply with industry standards, regulations, and client requirements. Assist in the preparation of BOQs (Bills of Quantities), cost estimates, and technical documentation. Review and revise drawings based on site feedback or design changes. Conduct inspections and provide engineering support during project execution.

Job Summary: We are looking for a skilled and detail-oriented Civil Design Engineer to plan, design, and oversee civil engineering projects such as roads, bridges, buildings, drainage systems, and other infrastructure. The candidate should be proficient in design software and capable of delivering technically sound and cost-effective engineering solutions. Key Responsibilities: Prepare detailed civil engineering designs and drawings as per project requirements. Conduct feasibility studies, site assessments, and design calculations for civil structures. Develop layouts and design plans for roads, buildings, drainage, water supply, and earthworks. Use software such as AutoCAD, Civil 3D, STAAD Pro, or similar tools for 2D/3D modeling. Coordinate with architects, structural engineers, and site teams to ensure design accuracy. Ensure designs comply with industry standards, regulations, and client requirements. Assist in the preparation of BOQs (Bills of Quantities), cost estimates, and technical documentation. Review and revise drawings based on site feedback or design changes. Conduct inspections and provide engineering support during project execution.

Jewellery CAD Designer Jaipur (In-office) - Digi Spheres Jewellery CAD Designer Jaipur (In-office) Job Summary: We re looking for a skilled Jewellery CAD Designer to bring jewelry concepts to life through high-precision CAD modeling. Key Responsibilities: Design intricate and production-ready 3D models Work closely with the design and production team to refine ideas Ensure technical accuracy, weight, and feasibility Stay updated with trends and innovations in jewelry design Requirements: Proficiency in software like Rhino, Matrix, or JewelCAD Prior experience or portfolio in jewelry CAD Strong attention to detail and creativity Full-time or long-term internship (6 months minimum)

John Cockerill, enablers of opportunities Driven since 1817 by the entrepreneurial spirit and thirst for innovation of its founder, the John Cockerill Group develops large-scale technological solutions to meet the needs of its time: facilitating access to low carbon energies, enabling sustainable industrial production, preserving natural resources, contributing to greener mobility, enhancing security and installing essential infrastructures. Its offer to businesses, governments and communities consists of services and associated equipment for the sectors of energy, defence, industry, the environment, transports, and infrastructures. With over 6,000 employees, John Cockerill achieved a turnover of 1,209 billion in 2023 in 29 countries, on 5 continents. Job Purpose To ensure steady & timely completion of drawings of equipments. To prepare Piping layouts, Piping assignments. To prepare Piping drawigns in 3D, and generate assembly and detail drawings To prepare bill of materials for piping assemblies & sub-assemblies , isometric outputs 2. Key Result Area Timely completion of drawings Drawings and BOMs made with very less or no errors. Self Development 3. Key Responsibilities Planning of work according to the requirement. Timely completion of assignments. Prepare the piping Layouts using the available inputs. Identification of critical problems and work out with specified time frames Ensuring errorless drawing generation. Coordinate with the team for relevant inputs in generation of layouts / drawings. Miscellaneous Ensures compliance to quality, safety & environmental standards as per ISO 9001, 14001, 18001 4. Qualification and Experience The candidate should be a Bachelors / Diploma in Mechanical Engineering from a reputed Institute, minimum 5 years of experience, in engineering / project / process / heavy engineering industry Must have hands on experience in Plant 3D and its features. Auto CAD 2D & 3D, Inventor drawings are added qualification. Good exposure to piping layouts, especially of the continuous furnaces Technical Competencies Thorough knowledge of drawings, drafting standards and engineering standards. Good understanding of PMS, various piping standards. Good knowledge of equipment related to Mechanical/Chemical. Working knowledge in Plant 3D. Good understanding of hand-sketches, views and equipment drawings. 6. Other Competencies Good in Communication, Fluency in English. John Cockerill offers you career and development opportunities within its various sectors in a friendly working environment. Do you want to work for an innovative company that will allow you to take up technical challenges on a daily basis? ! Discover our job opportunities in details on Career - John Cockerill

Role & responsibilities Bachelor's degree in Mechanical Engineering with 2+ years of experience; hands-on CAD experience with Creo; knowledge of DFMA and GD&T Excellent CAD PTC Creo skills, experience with GD&T and PLM tools like Team center Experience in Creo Surfacing and design in casting, plastics, or sheet metal Design and develop new products, focusing on surface design and routing Create 3D models and drawings, manage engineering changes, support new product development, and collaborate on continuous improvement initiatives

Engineer for PEC PEx Global Engineering (based in Chennai, India) Are you an enthusiastic, self-driven and result-oriented professional who wants to improve our customer s performance forward? We are looking for Engineer (Plant Machine Design) to be based in Chennai, India. You have an opportunity to be part of the team that delivers projects & services globally to pulp and energy industry. You will be handling AP (Asia Pacific) services cases of Boiler Retrofit/ Upgrade projects and time to time provide support to global projects coming from HQ based in Finland / Sweden. The successful candidate is expected to perform the following tasks; Must have a sound technical knowledge on Plant Design / Layout / Piping Design - Expert level in piping routing, layout, and support concepts. Expert level in E3D modelling who can be relied on all aspects of modelling related to equipment, piping, supports, ducts, extraction of drawings and reports, clash resolution, etc. Maintain log of unresolved operational issues associated with PDMS/E3D and update it to the lead Administrator for solution. Create Model Review file daily to enable Engineering & Project Management team to have a detailed Model Review. Routing studies and preparing sketches for Drafting and 3D modelling 3D modelling (piping, equipment and supports) in E3D Plot Plan / Equipment Layout - Prepare / check Piping GA s - Prepare / check Isometrics - Prepare / check MTO preparation and checking Supports selection, preparation & checking of support drawings. Pipe support modelling in E3D. Review contract documents and identify requirements and scope of work for project execution. Feasibility studies, Concept, FEED, detail design and procurement support, construction, testing & commissioning. Hands on knowledge of 3D Model review software like Navis. The ideal candidate is expected to hold the following. Bachelor / Master s Degree in Mechanical engineering. 5-8 years of experience in Plant Design & detail engineering Knowledge of ASME / EN / IBR codes and standards and familiarity with industry best practices related to Pressure Parts design engineering is a must. Working knowledge in engineering tools such as AutoCAD, E3D & Comos is a prerequisite for this position. Effective written and oral communication skills in English. Willingness to travel to client sites >25% of time is required for this position. We offer: We offer you a rewarding position in a global industry leader in pulp and energy industries with the possibilities to grow professionally. If this sounds like something you are looking for and you are ready to go forward in your career, send your application with your CV via the link provided latest by 30th July 2025 At Valmet, we enhance circularity and environmental efficiency and reduce CO2 emissions through the entire value chain. Valmet aims to enable fully carbon neutral production for its customers by 2030. Join the team! www.valmet.com/careers

Technical background, Diploma Mechanical / BE • A minimum of 2-3 years of relevant experience in costing or in design in manufacturing set-up. • Thorough understanding and experience of AutoCAD. Main Objectives of the job: Design Engineer is primarily responsible for designing high quality products, templates & fixtures and determining the amount of time, cost and resources required for producing a product. Integrate the physical design requirements and manufacturing aspects of all product development to produce designs that meet all applicable requirements for the form, fit, cost estimation and analysis activity assigned as per the job description below. The incumbent will pro-actively work with the engineering staff to prepare CAD drawings, drawings and other technical documents within the governing quality assurance program and procedures Duties/Responsibilities: • Assist engineering staff in the design, cost and development of systems and components. Interface with engineering staff effectively to ensure the form, fit and function of designs while also working with fabrication managers to ensure cost effectiveness and manufacturability of designs. • Accountable for studying, controlling and monitoring costing enquiries from CSR team & Management, and completing the same as per set KPI targets. • Work on ERP software to create item in LN system along with BOM and Routings • Collaborate with the engineering staff to produce design sketches and drawings in accordance with applicable standards. Accurately incorporate stitching /welding symbols and tolerances into design drawings. • Identify the Article as existing or new and participate in the preparation of cost studies utilizing historical data, statistical analysis and cost and quantity comparisons and develop new techniques as required to meet specific needs within specified parameters. • Work on data collection, like to, gather and compile data from various sources such as Drawings, Technical specifications, Supplier quote and historical cost data • Originate and/or review analyses, prototype test processes, operations procedures, and reports using computer-aided designing (CAD) and appropriate computer software. • To communicate with Sales/Customers, to get the design inputs and transform them into prototype model for fitment approval from customer. • Assess the capability of making In-house with Production Manager. • Identifying & assessing the potential risks and uncertainties and discuss with superiors for potential solutions • Estimating Material & Labor quantities as per Cutting Layout in AutoCAD and Costing guidelines for Raw Material consumption and Man-hours database for each Product. • Coordinate with Production Manager for Manhours for new Products requiring Production trials or sampling. • Prepare comprehensive cost estimates and proposals for client submission and bidding process • To handle the enquires and provide cost on daily basis to the Sales team with the help of CPQ software. • Create Costing Bill of Material in Software. • Ensure that the correct Raw Materials prices are set into Price List Master. • Ensure that all costing guidelines given by Management time to time are followed while making the costing. Collaborate with Managers, Engineers and procurement team to identify cost saving opportunities without compromising the quality. • Create Pre-calculation in Software and sharing it to relevant departments as per the SOP. • Update Master Record Sheet of Pre-calculation. • Create Price List for Standard Products & update on yearly basis or as per Management guidelines. • To prepare Time Study, Method Study & Development Of Jigs and Fixture for improvement. • To maintain the records of all the designs for quick traceability. • To execute any design / project related task assigned by superiors. • Compare Open Costing sheets of product categories and suppliers of the same region in order to verify consistency of costing details input in software. • Creating Calculations in CRM DB for Inter Company Purchase. • Follow up with concerned IC coordinator for offer price. • To follow up with Sales/Customer for approval of prototypes. • To create standard reference designs for each product to simplify the collection of design inputs from customers through Sales. • To work on Projects as & when needed. • To generate Bill of Materials and Pictorial Work Instructions for easy understanding of the workers. • Generate Post Calculation Vs Pre-calculation report. • Generate Costing & Design KPI report on monthly basis and ensuring that end-to -end task within set KPI target. • Creating general guidelines for specific Products to create & update Costing Bible. •