Order related Engineering for Integrally Geared Compressor Package Design, in order of contract specifications. Supporting Basic Engineering and creation of first issue of documentation Ensuring compliance to Contract, EDI (Engineering Design Instruction), Quality checklists 4-Eye Principles. Creation of Technical Concepts special solutions pertaining to Package Integration and Layout Project Budgets (Engineering Hours) Schedule alignment. 3D CAD modeling of entire Compressor Train Creation of Layout drawings, General Arrangements, Piping Plans, Foundation plans, cable routing plans etc for compressor packages. 3D Pipe Modeling and generation of fabrication isometrics. Planning, Modelling and extracting drawings of pipe supports in Siemens-NX. Assembly modelling of 3D Components like base frames, coupling guards, steel structures and platforms and generation of drawings. Creation of Bill of Materials for ordering of pipe and components. Plan, coordinate, implement and support detail design engineering in cooperation with internal and external customers for international projects of compressor packages. Preparation of Checklist, process procedure, master drawing, guideline to ensure the quality of the documents. What You Bring Engineering education in B.E. or equivalent experience Mechanical. Upto 5-8 years of relevant work experience 3D CAD with Siemens - NX (Modeling, Drafting, Mechanical Routing). Knowledge of Teamcenter (Globus), SAP (Atlas) Knowledge of other 3D Plant Design Systems, e.g. AVEVA - E3D or Bentley - Open Plant desirable Knowledge of mechanical design, plant and piping Design. Knowledge of ASME, API and relevant internal and international standards. Knowledge of Rotating equipment and auxiliary systems (compressor, turbine, heat exchanger, lube oil unit, gas seal panel etc.). Good Analytical skills, Communication Cross-cultural abilities

As SAP Project / Rollout Manager you will be responsible for the overall orchestration of preparation, planning, managing, and maintaining the SAP rollouts of the deployment activities and project plans for our business units. You would be responsible for ensuring all work are available according to the project scope. You would engage with relevant collaborators and secure availability and accuracy of deployment work in relevant SAP systems. Your will support implementation teams to go-live in a timely manner and ensure that the delivery scope and budget are maintained. What You Bring 10+ years of experience after a Bachelor s degree or equivalent experience in Computer Science, Information Systems, or related field. 5+ years of experience in IT project management with at least 3+ years in SAP project delivery with a SAP S/4HANA context. Experience and general knowledge about SAP systems and its modules. Experience with defining and execution cutover plans for sophisticated SAP projects in a multi-national context PMP or other relevant certifications preferred

You ll Make an Impact Lead the establishment of the Naroda Training Center, overseeing its physical infrastructure, procurement of equipment, and operational setup and define a long-term strategy for training and competence development, ensuring alignment with business goals and industry standard methodologies. Develop and implement a strategic training competence framework aligned with the companys objectives and industry standards. Collaborate with senior management in the region to identify training needs and prioritize initiatives that drive organizational growth and performance. Identify key training topics and techniques that can use the latest digitalization tools to improve and increase the training effectiveness, while working to standardize and harmonize training with other Siemens Energy training centers, so that training can be provided consistently, regardless of where the training occurs. Lead and manage a team of training professionals, including trainers, instructional designers, and competence assessors. Provide guidance, mentorship, and support to ensure team members are equipped to deliver high-quality training solutions. Design training programs tailored to various job roles and skill levels within the operational landscape, based on the needs of the serviced organizations. Use industry standard processes, ground breaking technologies, and innovative methodologies to deliver effective learning experiences. What You Bring Bachelors degree in engineering or technology, business administration, or a related field, ideally combined with an MBA or equivalent management experience. 10+ years of relevant experience in service businesses (field service, repair operations, customer technical support) or equivalent, with a proven history of developing and commercializing training offerings to industrial customers. Demonstrates professionalism, strong interpersonal skills, and the ability to engage effectively with all levels of the organization, from leadership teams to shop floor personnel and external clients. Strategic problem solver to translate business goals into actionable training initiatives. Strong analytical skills to assess training needs, evaluate program effectiveness, and drive data-driven decision-making and strong understanding of turbo machinery principles, operations, and maintenance practices.

You ll Make an Impact Carry out 3-D modeling and drawings of components / assemblies for different D-R products, Provide drawing updating and revision control; Follow engineering and drafting standard practices. Form Fit Functional Check for the complete assembly as per company standard Allot, check, and supervise output for quality, consistency and compliance to Siemens Energy standards and client requirements, Carry out engineering and design calculations using as per SE guidelines. Handle ad hoc projects as assigned by the Engineering Manager, Handle in confidence the drawings and / or trade secret information of SE products. Support efficiency improvement and establish standard methodologies for modeling and drafting activities within stipulated time-period. Electronic transfer of drawings, documents, and data with SE Globally, Works with Project Engineering, Design/Drafting, Project Management, External/Internal Relationships, Suppliers, Global Stakeholders, Product Engineering Create and modify engineering drawings in AutoCAD, 3-D models using SolidWorks Teamcenter, to support drawing conversion, revision of drawings of components assemblies and to carry-out engineering design / calculations per templates in compliance to Siemens-Energy standards and practices for different products To provide back-office Engineering Support for engineering, drafting to Fort Collins team. Key Outputs - Design of integral gas engine MU process PIDs, piping, mechanical assembly, demolition, IC, etc. 3D models using SolidWorks, Cabinet Assembly Manufacturing drawings, electrical schematics, wiring diagrams, general architecture, communication diagrams, Engineering Change Note generation/ Releasing drawing in Globus Team Center system What You Bring Bachelor of Engineering or equivalent experience of 6-8 years Exposure to ASME Y14.5 with Good hold on basic engineering Hands on experience with CAD software s like SolidWorks/ AutoCAD or NX is required. Experience with Parametric modeling, drafting, assemblies, expression based modeling, Part families, Wave-Link Geometry is required. Sophisticated Assembly features Handle large assemblies, Assembly arrangements Product Knowledge: Gas engines / Reciprocating Compressor or Diesel -Engines is preferred, good to have Knowledge in crafting pipeline, familiar with OG industrial rotating equipment and auxiliaries like Lube Oil system, pumps, turbochargers, etc

Prepare piping components specifications for procurement, piping drawings, and MTO or equivalent experience. Interpret technical specifications of leading consultants such as EIL, TEIL, UHDE, LTC, Technip, Shell DEP, ARAMCO, PDO, etc. Develop and read Package Engineering drawings like PI Diagrams, General Arrangement, Foundation Plans, piping plans, and piping isometric drawings. Apply your knowledge of rotating equipment, compressors, pumps, engineering calculations, and technical drawing interpretations. Demonstrate expertise in B31.3 piping design and proficiency in AutoCAD for developing General Arrangement Drawings, Piping Plans, isometric drawings, and supports. Apply 3D modeling for packages using Inventor/PDMS/PDS and conduct piping stress analysis with tools like K pipe/CESAR. Maintain detailed knowledge of consultant piping specifications, industrial piping design, and fabrication. Adhere to international standards/codes such as ASME, ASTM, API, AWS relevant to piping. What You Bring Bachelor s degree or equivalent in Mechanical Engineering with 2-3 years experience in system design, 3D model development, and component design for rotating equipment systems. Proficiency in developing engineering 3D Models using NX 11.0, PDMS in a Teamcenter environment for packages, balance of plant systems, piping, structural, and tubing designs. Ability to generate models, drawings, and catalogs based on client requirements, order specifications, and other technical standards. Experience in providing back-office engineering support for Siemens Energy operations worldwide, including workshop, vendor, and client site support. Proficiency in preparing engineering specifications for piping materials and valves, crafting packages on AutoCAD, and crafting piping GA Isometric drawings with MTO or equivalent experience. Skilled in developing PIDs in Comos/AutoCAD and interpreting and implementing simulation study results. Strong understanding of basic calculations for pipe sizing, pressure drops, and other related sizes. Proficiency in liaising with clients and consultants for technical matters, drawing approvals, and 3D model reviews. Familiarity with ERP systems such as Oracle and SAP is an added advantage.

Develop and Deliver Training Programs: Design and facilitate technical training courses on Siemens Energy centrifugal compressor operations, maintenance, and troubleshooting for employees, field service teams, and customers. Client and Sales Collaboration: Serve as the primary point of contact with clients and the sales team to develop tailored training solutions that address specific operational needs. Training Material Development: Create and update training materials, ensuring consistency in design, quality, and technical accuracy. Apply innovative learning methods to improve engagement and retention. Field-Based Instruction: Provide hands-on training at customer sites, including refineries, chemical plants, and offshore installations, ensuring real-world application of skills. Internal Employee Training: Support ongoing technical training initiatives for internal employees, enhancing their competencies and readiness to support customers. Training Documentation and Compliance: Maintain records of training completion, generate reports, and ensure compliance with company and industry standards using the Learning Management System (LMS). What You Bring Degree or equivalent experience in Mechanical Engineering, a related field, or equivalent technical experience. 5-8 years of hands-on experience in the operation, maintenance, and inspection of centrifugal compressors (experience with reciprocating compressors is a plus). Strong working knowledge of Siemens Energy centrifugal compressor products, their components, and associated systems. Experience in technical training, either for customers or internal employees, with a proven track record to design and deliver engaging instructional content. Excellent verbal and written communication skills, with the ability to engage successfully with trainees of all technical backgrounds.

Prepare formal bids and price information using SAP and relevant tools. Make active and informed decisions on parts pricing. Collaborating closely and coordinating with the global factories to establish timely submission of quotations. Ensure minimum Quote Response Time (QRT), and bring up if required. On all quotes and orders review and verify pricing, margin, delivery time, delivery alternatives if required, expediting fees, etc. Analyze tender requirements, identify, manage, and mitigate risks in the commercial areas including currency risks, nancial security instruments, terms of payment, insurance, export control customs, and compliance. Participate in customer negotiations as Subject Matter Expert including pricing, improving delivery and non-standard Terms and Conditions. Initiate engineering reviews as needed by client requirements. Coordinate with engineering and operations to establish new drawings, drawing revisions and the use of alternate material. Establish lead times using data provided by planners, buyers, and manufacturing personnel. Using available resources provide delivery alternatives when necessary for purchased and manufactured items. Review customer purchase orders and inform order management, SCM, and operations. Send out Order Acknowledgement. Work with client managers to plan visits to growth compression parts business. Review forecasted outages with Client manager and support the development of Recommended Spare Parts list (RSL) to grow emergent parts sales and to win back parts business. Provide clients with basic product and technical support and inform client and bid managers about parts life cycle time, material characteristics, and manufacturing processes. Provide fleet specific know how and marketing expertise tailored to the specific needs of the client. Meet the parts selling growth targets as assigned yearly. Handle nancial results according to set targets and optimize gross pro t and cash ow. Domestic / international travel required. What You Bring Excellent communication and presentation skills. Proven digital literacy and experienced with Microsoft Office Suite (Word, Excel, Outlook, Power-Point), experienced with ERP software (Oracle, SAP etc.) is highly desirable. Accuracy attention to detail when working towards tight deadlines. Ability to work collaboratively and individually with the same passion and intensity. Good organizational and time management skills. Self-motivation to find efficient and effective ways to accomplish end goals. Knowledge and understanding of Siemens Energy s products and services.

Bid Manager supports the Sales effort of new equipment globally, pending project assignment. The following responsibilities of this position apply to one or more of Siemens Energy CP Product Lines, which include the following: Centrifugal Compressors (Single Shaft) How You ll Make an Impact Review the Client s Request for Quotation (RFQ) and Perform equipment selections including drivers and auxiliary systems, using company engineering tool, or other selection tools, as applicable for the product line. Fully configure and propose optimized solution(s) with tangible value proposition and Responsibility for Scope of supply, commenting Customer s Technical Specifications and Prepare Buyout RFQs. Evaluate & communicates with vendors in close agreement with the Project Procurement Manager and Coordinate the Cost Analysis and Prepare Pricing and Establish the Payment Milestones, ensure alignment of sub-supplier payment terms and Perform a Cash Flow Analysis. Work with the Regional Coordination Group, Operation-based departments, shared services (e.g., Commercial & Finance) and the Field Service organization, as required, to identify and quantify risks, develop mitigating actions to those risks, prepare the technical/execution risk assessment form. Request guidance from the Sales Manager or Opportunity Leader for the commercial risk. Coordinate Proposal Bill of Material, System Drawing & Project Schedule and Maintain Sales Force (CRM tool), as required for those items under Bid Management area of responsibility and Assist the Sales Managers in developing Technical and Commercial strategies for the successful implementation of the Order Collection Process. Participate in the development of quantified Value Propositions and Integration of technical activities, product, and services, including vendor supplied equipment/services in proposal in a timely manner to meet proposal deadlines and Reviews the proposal process for compliance with established process, including proposal completeness, accuracy, degree of configuration, cash flow analyses, risk assessment forms (execution & commercial), solution configuration, on-time submittals, etc. Identify cost- or time-saving opportunities inside the proposal development process and implement process improvement initiatives and Complete the Risk and Opportunity Analysis process prior to issuing new equipment proposals, paying particular focus on margin screens, currency risks, payment terms, cash flow, cancellation terms, and execution risks and Review pricing for compliance with pre-established screens and price/scope agreement. Issues price recommendations for approval and Coordinate and participate in client clarification meetings. Understanding of client s applications and process and Understanding of competition products & offerings. Prepare and submit in a timely manner the project pre-release and order entry packages to the manufacturing Operation. Participate, lead internal and client kick-off meetings and Support the order collection team in preparing the internal approval documentation and Support the Sales Manager with project or product presentations and Conducts business affairs with the highest standards of ethics and integrity. What You Bring 7 to 15 years of relevant work experience Mechanical, Electrical, or Chemical Engineering Degree or equivalent experience from an accredited higher education institution Proficiency with Microsoft suite of programs and select engineering programs. Excellent written, verbal communications and presentation skills. Work well with others in a team environment and Proficiency in spoken and written English language, bilingual & international experience a plus. Domestic and International travel is required to support training, project presentations, bid clarification and project kick off meetings and Market awareness Rewards/Benefits Employees are eligible for Remote Working arrangements up to 2 days per week. All employees are automatically covered under the Medical Insurance. Company paid considerable Family floater cover covering employee, spouse and 2 dependent children up to 25 years of age. Siemens Energy provides an option to opt for Meal Card to all its employees which will be as per the terms and conditions prescribed in the company policy. - As a part of CTC, tax saving measure Flexi Pay empowers employees with the choice to customize the amount in some of the salary components within a defined range thereby optimizing the tax benefits. Accordingly, each employee is empowered to decide on the best Possible net income out of the same fixed individual base pay on a monthly basis

Drafters are crucial in engineering, creating detailed technical drawings from engineering designs. They convert sophisticated ideas into accurate blueprints and schematics, which are essential for construction and manufacturing. Using specialized software, drafters ensure every detail is precise, aiding in the clear communication of design specifications. Their responsibilities include crafting plans that engineers and builders depend on to complete projects optimally. How You ll Make an Impact Preparing manufacturing drawings and 3-D Model using Siemens NX integrated with Teamcenter for various components and assemblies of compressor. Able to interpret various applicable international codes and standards along with Siemens internal standards. Handling engineering Bill of Materials using Siemens NX, Teamcenter and SAP. Performing detail self-review of drawings, BOM and documents. Understanding the requirement of project and coordinating effectively with Global team. Ensure quality and timely deliveries of engineering documentation. Living core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.] What You Bring Diploma in mechanical engineering or other comparable degree 3 to 5 years of relevant engineering work experience Significant hands-on experience in working with Siemens NX and Teamcenter Experience in creating detailed manufacturing drawing using GD&T as per ASME Y 14.5 Excellent team player to support and serve the global team. Ability to work independently. Rewards/Benefits Employees are eligible for Remote Working arrangements up to 2 days per week. All employees are automatically covered under the Medical Insurance. Company paid considerable Family floater cover covering employee, spouse and 2 dependent children up to 25 years of age. Siemens Energy provides an option to opt for Meal Card to all its employees which will be as per the terms and conditions prescribed in the company policy. - As a part of CTC, tax saving measure Flexi Pay empowers employees with the choice to customize the amount in some of the salary components within a defined range thereby optimizing the tax benefits. Accordingly, each employee is empowered to decide on the best Possible net income out of the same fixed individual base pay on a monthly basis

NDT Engineer in Purchasing Department - Focus Cast and Large Steel Fabrications ComponentsA Snapshot of Your DayAs part of the global purchasing organization, your role involves planning, organizing, and coordinating inspections both internally and with external organizations. You will meticulously review supplier procedures and specifications, as well as drive development initiatives when necessary. You will independently review suppliers technical documentation and carry out Non-Destructive Testing (NDT) on components for gas and steam turbines according to relevant specifications at suppliers facilities. If during Ehsan inspection any deviations from supplier results are identified, you are responsible for describing them in technical terms, communicating effectively, and collaborating with cross-departmental teams to determine appropriate next steps.How You’ll Make an ImpactPlanning, organization, and coordination of inspections at supplier facilitiesPreparation, execution, and follow-up of non-destructive tests on gas and steam turbines componentsSupplier qualification, development and active participation in the quality improvement of suppliers and purchased partsAvoiding quality problems by developing preventive measures for suppliersMethods for quality assurance and analyzing the causes of defects and initiating appropriate corrective measures together with suppliersImplementation of preventive SQM methods and risk management in supplier-related processes, projects and productsInitiating, monitoring and actively pursuing corrective and preventive actions for suppliersProactive collaboration with a global team and internal partnersWhat You BringCompleted mechanical engineering bachelor’s or master’s degree, CWI, CWE or similarCertified to ISO 9712 or similar in VT, MT, PT and UT to at least Level II required, Level III preferred LT desirableSeveral years of relevant professional experience in the NDTProfound knowledge in the application of quality methods, such as 5 Why, FMEA, 8D, RCAVery good collaboration and communication skills requiredConfident handling of MS Office applications, SAPTeam player, precise work, high level of initiative and flexibilityConsistent and self-confident appearanceConstructive collaboration across all levels of a global organizationBusiness fluent in EnglishWillingness to travel, nationally and internationally

Efficiently interpreting various applicable international codes and standards along with Siemens internal standards. Applying knowledge of these standards for detail design of compressor components. Preparing detailed Model and Drawing and Managing engineering Bill of Materials using Siemens NX integrated with Teamcenter. Performing detail self-review and peer review, Participating and leading design reviews. Understanding the requirement of project and coordinating optimally with Distributed team. Identify and address deviations/issues in project in consultation with technical lead. Ensure quality and timely deliveries of engineering documentation. Handling project activities, schedule and budget using JIRA. Performing fixing, analyzing failures, prepare root cause analysis and implement actions. Taking initiatives for improving process efficiency. Living core values of safety and integrity, which means taking ownership for your own actions while caring for your colleagues and the business. What You Bring Bachelors in mechanical engineering or other comparable degree. 3 to 5 years of relevant engineering work experience Significant hands-on experience in working with Siemens NX and Teamcenter Experience in creating detailed manufacturing drawing using GDT as per ASME Y 14.5 Excellent phenomenal teammate to support and serve the distributed team. Ability to work independently with clarity on scope and responsibility. Ability to manage numerous projects and deadlines. High flexibility in taking new tasks/responsibilities. Proactive and Solution Oriented. Ability to Pull inputs and interact with interface partners. Knowledge on turbo machineries and their components will be added advantage

A Snapshot of Your Day Drafters are crucial in engineering, creating detailed technical drawings from engineering designs. They convert sophisticated ideas into accurate blueprints and schematics, which are essential for construction and manufacturing. Using specialized software, drafters ensure every detail is precise, aiding in the clear communication of design specifications. Their responsibilities include crafting plans that engineers and builders depend on to complete projects optimally. How You ll Make an Impact Preparing manufacturing drawings and 3-D Model using Siemens NX integrated with Teamcenter for various components and assemblies of compressor. Able to interpret various applicable international codes and standards along with Siemens internal standards. Handling engineering Bill of Materials using Siemens NX, Teamcenter and SAP. Performing detail self-review of drawings, BOM and documents. Understanding the requirement of project and coordinating effectively with Global team. Ensure quality and timely deliveries of engineering documentation. Living core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.] What You Bring Diploma in mechanical engineering or other comparable degree 3 to 5 years of relevant engineering work experience Significant hands-on experience in working with Siemens NX and Teamcenter Experience in creating detailed manufacturing drawing using GDT as per ASME Y 14.5 Excellent team player to support and serve the global team. Ability to work independently

A Snapshot of Your Day You will be conducting digital projects to deliver IT implementation projects and IT improvement projects, based on large and sophisticated SAP projects in a multi-national context. How You ll Make an Impact As Project Manager you will be responsible for the overall orchestration of preparation, planning, managing, and maintaining the IT Infrastructure project for our business units. The position requires Project manager with Infrastructure Projects delivery experience. The preferred candidate will have an extensive background in managing large scale Infrastructure operations, transitions and transformation projects in an outsourced environment. What You Bring 10+ years of experience after a Bachelor s degree or equivalent experience in Computer Science, Information Systems, or related field. 5+ years of experience in IT project management with at least 3+ years in plan, design, and implement of IT Infrastructure project delivery Should have managed Infrastructure Projects independently. Demonstrated experience in cybersecurity, privacy, and/or an information protection-related function. Infrastructure domain knowledge Transition and Transformation projects, /and/or experience in delivery of technology projects like Network and Servers Refresh, Network and Security Hardware deployment and Migration related Projects, Product or Service Migration, Cloud Migrations, DC Migrations, IT/OT Projects, implementation of tools or systems Integration projects. PMP or other relevant certifications preferred

Design, develop, verify, and test new detection agents, based on specific, Steam Turbine/Compressor/Gas Turbine failure modes and criticalities (Top Ten Offenders, FMECA based). Develop Remote Diagnostic Monitoring activity to ensure that risk to both Siemens Energy and customer organisations from equipment degradation or downtime is minimised/mitigated by timely preventive action. Creation of customer reporting ticketing activity ensuring its timely, concise, and technically accurate whilst delivering maximum commercial leverage. Onboarding of new units in the RDS systems. Maintenance/reporting of the remote services platform connection and maintenance processes establishing maximum opportunity for site data collection. Own the local research and development activities that have been agreed by RDS global via the Product Development process. Engaging globally with RDS, external suppliers, academia, customers, and professional bodies to maintain competitive advantage. What You Bring Bachelors Degree in Instrumentation and controls (Proffered) OR Mechanical Engineering. with 3-5 years of confirmed experience in Turbomachinery (Steam Turbine/Turbo Compressor/Recip/Gas Turbine). Experience in multiple Engineering environments including Design Engineering, Controls Engineering, Assembly and Test, Installation Commissioning, Performance Engineering, Support Engineering, Technical Helpdesk, Remote Diagnostic Services. Must be customer focused and be able to demonstrate leadership, trouble shooting, problem solving and analytical skills / decision making in a high-pressure environment. Appreciation of Siemens Energy international Customer base, their respective cultural diversity and an ability to communicate in more than one language would be a distinct advantage. Be analytical. Open Inclusive. Pragmatic. Big-picture thinker. Have strong lobbying negotiation skills. Strong Project Management skills.

Design and Develop: Architect and develop Python-based applications that apply generative AI models to address complex client challenges. Cloud Integration: Implement and manage cloud-hosted AI solutions, ensuring seamless integration with existing client infrastructures. Client Collaboration: Engage with business to understand the use case, create high-level design and technical approach documents, collaborating with the development team to deliver technical assistance and solutions Proof of Concepts (PoCs): Lead the development of PoCs to demonstrate the potential of generative AI applications, adapting quickly to evolving project requirements. Technical Leadership: Mentor junior developers, review code, and ensure alignment with AI solution development and software standards of company. Continuous Learning: Stay abreast of the latest advancements in generative AI and cloud technologies, integrating new methodologies and tools as appropriate. What You Bring Bachelor s or "Master s degree or equivalent experience" in Computer Science, Engineering, or a related field. Minimum of 5 years of professional experience in Python development, with at least 2 focused on AI/ML applications Proficiency in Python and familiarity with AI frameworks such as TensorFlow or PyTorch. Experience with cloud platforms (AWS, Azure, or Google Cloud) and their AI service offerings. Knowledge of API development and microservices architecture. Experience in deploying AI models into production environments. Familiarity with data preprocessing and feature engineering.. Exposure to natural language processing (NLP) and computer vision applications. Strong communication skills, capable of articulating complex technical concepts to non-technical customers.

Lead the design, development, and implementation of data pipelines and ETL workflows. Manage and optimize workflows to ensure reliable data processing and job scheduling. Design and implement data solutions in database. Ability to be creative and proactive with report design and development using little to no documented requirements Collaborate with cross-functional teams to gather requirements and translate them into scalable data architecture and process designs. Fostering a culture of continuous improvement and innovation. Ensure data quality and integrity by implementing standard processes in data governance and validation. Monitor performance, troubleshoot issues, and optimize data systems for efficiency and scalability. Stay abreast of industry trends and emerging technologies to ensure continuous improvement of the data engineering practices. What You Bring / Skills, Capabilities You should be an experienced (6+) IT professional with your graduation in Engineering or other equivalent qualification (MCA). 4+ years of relevant work experience in developing & maintaining ETL workflows. 4+ years of relevant work experience in data analytics, reporting tool like Power BI, Tableau, SAC. 4+ years of relevant work experience in SNOWFLAKE or any cloud database with proven knowledge of writing complex SQL queries. Good to have experience in working in EPM tool like JEDOX, ANAPLAN, TM1 Good to have experience in multidimensional database concepts like OLAP, Cube, Dimensions etc. Good to have experience in developing Power Automate workflows. Good to have experience in Excel Formulas like PIVOT, VLOOKUP etc. Ability to learn new software and technologies quickly and adapt to an ambitious and fast-paced environment. Experience collaborating directly with business users and relevant collaborators

A "Regional HR Services Head" is a kind of "swiss army knife" for various topics in HR services, being the focal point in ensuring efficient and effective delivery through an eco-system of providers Inspiring change initiatives in area of responsibility, often across several/all HR functions and involving (senior) business leaders Handling and establishing a team responsible for HR Services within the region Building and strengthening process know-how in order to future proof the organisation Support of other HR IT / Business Process initiatives, e.g. giving regional or topic expertise and aspects, playing a key role in the roll-out in assigned countries Work closely and service management of the business process outsourcing service provider, ensuring quality operations, whilst taking the lead on deficiency resolution A major contributor in our global HR transformation project, whilst ensuring continuing of existing operations What You Bring Strong experience in HR Services / Business Processes including shared services / HR BPO outsourcing operations, i.e. HR Administration, Payroll, HR query Management (Service Desk) Experience of leading a team of experts focused on ensuring efficient and quality delivery HR IT domain know-how - Workday HCM, ServiceNow desirable Experience in managing / service managing an eco-system of partners / vendors in HR Services Proven track record in delivering change / improvement projects, specifically in HR services Strong problem solving and critical thinking skills with a continuous improvement approach Self-directed with an ability to organize, plan, prioritize Outstanding communication skills Excellent organizational and time management skills Self-motivated to drive initiatives through to completion as an individual contributor and through others Ability to thrive in a global environment, working flexibly where required Degree in Administration with HR or a combination of HR/IT, or Business Information Systems is desirable but not crucial

Develop and implement project-specific quality plans (QCPs / ITPs) and ensure compliance with Siemens Quality Management standards and Customer Specifications. Develop Tender Phase Quality Control Plans, provide Quality resource estimates for projects, provide quality input into Pre-qualification and selection process as required by the tendering team and project delivery team Review project processes documentation to guarantee alignment to specified quality benchmarks and customer specifications and international standards. Shall attend internal external Kick off meetings (KOM) for BID projects Pre-Inspection meeting (PIM) for new projects Experience in BID activities like- Comments Exceptions (CE). QA Budget calculation, BID QCP preparation etc. Provide budget estimations and review customer quality specifications during the bid preparation stage. Ensure quality requirements in Oil Gas order projects including suppliers are met efficiently and align with customer expectations and our Quality policy What You Bring Bachelor s degree in mechanical /production engineering with 2 to 3 years of experience in Quality Management within complex projects, preferably in Oil Gas business. Proven work experience as a Quality Engineer or similar role Basic knowledge of Quality Management System (QMS) Knowledge of different types of quality certificates, quality documents, Quality Dossiers, material test certificates, EX-ATEX Certificates, quality standards Competency in Microsoft Office Suite (Word, Excel, Outlook, Power-Point) Proficiency in PLM (Team Center/Globus) and ERP system (SAP), Web-based Portal

Overall responsibility for the execution of electrical engineering in our projects - securing the fulfillment of customer contracts and related specifications. Owning the electrical execution team in close collaboration and communication with the project engineering manager and general project management as well as with other relevant team members (e.g., your line manager) Leading and monitoring of our internal and external suppliers including handling electrical, IC and related layout interfaces Project reporting regarding engineering progress, technical clarifications and engineering risks or opportunities Implementation, steering and control of the electrical design process with focus on related concepts, technical specification preparation and BoQs Monitoring of on time delivery of all work youre doing, quality and electrical engineering hour consumption and ensuring our EHS standards are met. What You Bring Master s or bachelor s degree in electrical engineering, Energy Management or related fields +8 years Experience in handling and owning the electrical engineering of either large HVDC or Substation or Power Plant projects. Candidates with more experience can be considered for a higher level or vice-versa. Strong Technical knowledge in Electrical Power Systems, Motor Control Centers, MV and LV Switchgears, Transformers, Converters, Rectifiers Single Line and Three Line Diagrams etc. Experience with the design of NEC/IEEE Cables, Cable Routing, Duct banks, Cable Trays etc. Experience in project management and/or managing of intercultural teams. Intercultural collaboration and partnership with international clients, consortium partners and suppliers

Lead all manufacturing and CNC programming activities. Establish CNC programming strategies, policies, and guidelines, and align these with customer and stakeholder needs. This position requires a strong technical foundation, strategic planning, and hands-on leadership to oversee manufacturing processes and ensure operational efficiency. How You ll Make an Impact Team Leadership: Supervise the CNC Programming group, guiding a team of managers and professionals. Exhibit strong leadership, communication, and social skills. Recruit, interview, hire, and train new department personnel. Strategic Management: Identify business opportunities across various sites or locations. Handle all critical CNC programming operations, ensuring resource optimization and continuous process improvements. Stay abreast of the latest technologies and methodologies in CNC programming. Technical Mentorship: Provide technical expertise in CNC programming for various manufacturing methods. Ensure accurate budget management and resource allocation. Drive process innovation to meet evolving customer needs and enhance overall operational strategies. Process and Quality Control: Develop and maintain detailed documentation, regularly updating processes to align with current industry standards. Train and mentor other professionals in the CNC programming team. Implement manufacturing process improvements to enhance efficiency and reduce costs. Interpret complex machining drawings and validate the accuracy of G M codes, cutting tools, and cutting parameters. Niche Expertise: Proficient in Vericut or other NC verification software. Skilled in machine building and control configuration using Vericut. Experienced in NX Post processor development and familiar with Feature-Based Machining (FBM) and Machining Knowledge Editor (MKE). Specialized manufacturing experience with products such as Centrifugal compressors, Reciprocating compressors, Steam turbines, and Gas turbines. What You Bring Education: Bachelor s degree or equivalent experience in Mechanical, Industrial Production Engineering. Advanced degree is preferred. Leadership: Minimum of 5 years of experience in leading teams of professionals. Technical: At least 15 years of expertise in UG / NX CAD CAM systems. Collaboration: Shown experience in coordinating across different team member groups. Specialization: Proficiency in CNC programming for Turning, Milling, Turn-mill, Probe, and EDM processes

Develop and implement advanced testing strategies and frameworks. Lead and mentor QA teams to ensure high-quality deliverables. Understand requirements and ensure comprehensive testing coverage for functional and non-functional requirements. Establish performance, scalability, and reliability testing processes. Provide actionable insights for continuous improvement. Evaluate and integrate new testing tools and technologies. Work closely with software development teams, product owners, and business stakeholders to define testing criteria for all requirements. Conduct code reviews and maintain test automation code quality. Define test metrics and track them to ensure testing effectiveness. Stay updated with latest trends in technology and AI. Create plans to evaluate relevant topics, train the team and adapt those. What You Bring Bachelors degree in Computer Science, Engineering, or a related field. 10+ years of experience in software testing and quality assurance. Proven track record of designing and implementing test frameworks and automation solutions. Strong understanding of software development and QA methodologies. Experience with performance and scalability testing. Excellent leadership and mentoring skills. Hands-on experience in implementing manual and automation test strategies. Proficiency in test automation tools such as Selenium, JUnit, and TestNG. Strong programming skills in Python and Java. Experience with Continuous Integration/Continuous Deployment (CI/CD) processes. Expertise in performance testing and quality assurance. Good understanding of Agile/Scrum methodologies.

Lead the digitalization efforts within the Gas Services business by integrating PLM systems with pioneering digital tools and platforms Drive the adoption of digital technologies and automation to improve the design, manufacturing, and service processes for our GS colleagues Develop digital threads that connect disparate systems and enable seamless data flow across the product lifecycle Collaborate with IT and business leaders to define and implement digitalization strategies that align with the companys vision and digital strategy Ensure that PLM solutions support advanced analytics, machine learning, and IoT for predictive maintenance and performance optimization Advocate for digital processes and foster a culture of continuous improvement and innovation across the various product lines and businesses Facilitate workshops and training sessions to upskill the workforce in digital competencies and tools Be a business partner for the product management organisation and keep them informed along the journey What You Bring Degree (Bachelor or Master) in Computer Science, Engineering, or a related field, with a specialization in digital technologies or equivalent Longstanding professional experience in the PLM environment, with a strong emphasis on digitalization Proven track record of leading digital transformation projects and implementing digital solutions in a complex industrial environment Deep understanding of the digital lifecycle management of the Energy solution business Expertise in PLM tools such as Teamcenter, Comos, or similar, with a focus on digital integration and data analysis Strong leadership and communication skills, with the ability to navigate across hierarchy levels interacting with experts all across the compan

He/she will act as a business partner for project managers and execution the contract. Project Controlling - Conducting regular project review during the execution of project including Project cost Forecasting, Margin analysis, Variance analysis of Cost, Ensure accurate Balance Sheet accounting incl. LD, Warranty project specific provisioning. Analysis explanation of project performance cost deviations, if any. Calculation of Project concurrent cost and periodically update the project cost Support Sales team in arranging Bank Guarantee etc. Customer contract review and analysis. Creation of detailed work break down structure (WBS), Sales Order in SAP. Identification of early warning signals within a project(s), if any. Support project closure and retrieval of bonds / guarantees. Receivables Management including visiting customers in India and abroad for his/ her project. Monitor cash-flow on project(s) Accounts Receivable, Inventory, Advances. Reporting and presentation of various business critical metric as and when required. Facilitating the deputation of supervisor to overseas location and compliance to all statutory, legal and tax requirements. Drafting contractual claim letters to customer and vendors. Solid understanding of INCOTERMS, UCP 500 etc. is desirable. What You Bring CA/CMA/ MBA with at least 7-10 years of relevant experience. Good knowledge about SAP MS Office, Good Communication Presentation Skills Positive attitude and ability to endure under pressure Analytical ability and problem-solving skills. Person having working experience in Project environment would be given preference

Prepare piping components specifications for procurement, piping drawings, and MTO or equivalent experience. Interpret technical specifications of leading consultants such as EIL, TEIL, UHDE, LTC, Technip, Shell DEP, ARAMCO, PDO, etc. Develop and read Package Engineering drawings like P&I Diagrams, General Arrangement, Foundation Plans, piping plans, and piping isometric drawings. Apply your knowledge of rotating equipment, compressors, pumps, engineering calculations, and technical drawing interpretations. Demonstrate expertise in B31.3 piping design and proficiency in AutoCAD for developing General Arrangement Drawings, Piping Plans, isometric drawings, and supports. Apply 3D modeling for packages using Inventor/PDMS/PDS and conduct piping stress analysis with tools like K pipe/CESAR. Maintain detailed knowledge of consultant piping specifications, industrial piping design, and fabrication. Adhere to international standards/codes such as ASME, ASTM, API, AWS relevant to piping. What You Bring Bachelor s degree or equivalent in Mechanical Engineering with 2-3 years experience in system design, 3D model development, and component design for rotating equipment systems. Proficiency in developing engineering 3D Models using NX 11.0, PDMS in a Teamcenter environment for packages, balance of plant systems, piping, structural, and tubing designs. Ability to generate models, drawings, and catalogs based on client requirements, order specifications, and other technical standards. Experience in providing back-office engineering support for Siemens Energy operations worldwide, including workshop, vendor, and client site support. Proficiency in preparing engineering specifications for piping materials and valves, crafting packages on AutoCAD, and crafting piping GA & Isometric drawings with MTO or equivalent experience. Skilled in developing PIDs in Comos/AutoCAD and interpreting and implementing simulation study results. Strong understanding of basic calculations for pipe sizing, pressure drops, and other related sizes. Proficiency in liaising with clients and consultants for technical matters, drawing approvals, and 3D model reviews. Familiarity with ERP systems such as Oracle and SAP is an added advantage.

A Gas Turbine Systems Engineer (Senior) apply the latest systems and technologies in relation to the gas turbine package auxiliary equipment and skid (Lube Oil Console, Fuel Systems, Gas Seal System, Water wash System etc) to improve the performance and reliability of our products. You will be responsible to ensure that all packaged equipment designs meet the Company design rules and current practices. The candidate will oversee and review the work of other team members, providing guidance and instruction as needed with the ability to mentor and develop junior designers and lead complex tasks How You ll Make an Impact Provide a technical work with internal departments, regional divisions, suppliers, and customers, ensuring that the project upgrades are driven within allocated budgets and timescales. Standardizing and documenting solutions which can be applied in a consistent manner. Deliver the project activities on time with quality. Propose and implement package upgrades aimed at preventing future issues, enhancing the overall product lifecycle. Address and resolve issues in the field by analysing fault reports and implementing corrective actions. Build and maintain Piping and Instrumentation Diagrams (P&IDs) using AutoCAD software. Technical recommendations into sales tenders to support future upgrades. Generate purchase specifications for equipment and components, including part creation and lifecycle management within Siemens PLM. Produce engineering documents such as design calculations, technical reports, risk assessments, performance graphs, and datasheets as the task demands. What You Bring A Bachelor s or Master s degree or equivalent experience in Mechanical Engineering, Aerospace Engineering, or a related field, accredited by the Engineering Council is required. Course with Gas Turbines/Turbomachines background is preferable Experience: 10-12 years of proven experience in a Fluid Systems or equivalent role within an associated or similar industry. Preferred candidates will have experience with Gas/Steam Turbine and/or Gas Compression auxiliary packaged systems. Experience with specifying fluid system components and technologies, such as pumps, valves, piping, control gear, actuators, and instrumentation, with ability to evaluate parts and processes for cost, efficiency, and reliability improvements. Good knowledge and understanding of relevant industry standards and regulations applicable to fluid systems design and safety in relation to auxiliary packaged systems. (e.g. ISO21789, SIL, API, PED, ATEX). Knowledge of COMOS would be effective. Lean Six Sigma Green Belt is preferable

A Snapshot of Your Day In this role, you will be responsible for the detailed engineering of rotating equipment packages, including compressor packages per API 617, lube oil systems per API 614, seal gas systems per API 692, and cooling water systems. This involves the detailed engineering of single shaft centrifugal compressor packages in accordance with Siemens Energy standards, client specifications, and applicable codes. You will also support the project execution team and project sites as needed, providing engineering solutions that meet client requirements. This includes the optimum design and selection of package components that adhere to relevant standards, codes, and specifications. How You ll Make an Impact Detail engineering activity completion as per project milestone. Preparation of Engineering specifications of Heat Exchangers, Pumps, filters, valves etc, Preparation of Key engineering Documents like Process and Instrumentation diagrams, General arrangement drawings, foundation plan, piping layout drawings. Single Shaft compressor Package Design per API 617. Lube oil system design per API 614 Seal Gas system design per API 692 Sizing and selection of all components of systems (Pumps, Motor, Filter, control valve, booster, Heater, Transmitters, Orifice, Valves, Instruments etc Design Input- Output scheduling, checking and approval (from client). Checking of key engineering Vendor documents of bought out items (like Pressure Vessels, Heat Exchangers, Filters, Strainers, pumps etc.) and to give engineering approval the earliest possible to facilitate early shipment of packages. What You Bring A proven experience of 5 years in the engineering of static and rotating equipment, as well as package items. Bachelors or Masters degree or equivalent experience in Mechanical Engineering (BE Mechanical / ME / B.Tech / M.Tech)

A Snapshot of Your Day In your role as Senior Team Lead - Closing Reporting, you will advise a team of domain authorities, which includes, handling of accounting issues, analysis of errors, initiation of any vital corrections and leading process improvement activities or initiatives, if needed with support from the Head of Accounting Services IN. How You ll Make an Impact Responsible for the periodic financial statements (monthly, quarterly, and annual financial statements) in accordance with IFRS, considering internal guidelines in various and sophisticated IT systems, adhering to deadlines. Perform Month End activities and reconciliations of accounts. assisting with implementing and detailing new processes and procedures. Posting of accruals, provisions, and further relevant GL items Ensuring stability in monthly, quarterly, and annual financial closing activities, actively providing support to General Ledger team members as a relevant specialist and leader. Working independently and proactively supporting the General Ledger team members, you will be responsible for internal controls in Closing Reporting process, also participating in internal and external audits by providing timely and qualitative information and resolve queries from the auditors (where applicable for the assigned countries/legal entities). You are actively involved in leading, proposing and coordinating people and processes in continuous improvement initiatives as part of finance transformation projects. You will support projects related to General Ledger and Closing, Mergers and Acquisitions and ERP migration projects, among others. What You Bring Bachelor s degree in accounting or related field with 7 years experience in Closing Reporting and Finance Operations and minimum 4 years of experience in Team Leadership Extensive knowledge of accounting and IFRS is required. Very good MS-Office skills (especially in MS-Excel) and deep understanding of business processes in SAP Experience in transitions and transformation projects

You are responsible to work within the Compressor Package Development organization to develop and deliver competitive packages for our emerging markets. You will work on RD and other development measures for the business. You are proactively seeking mentorship from your peers in Package Front End Engineering and Package Execution Engineering and collaborate closely with Product Digitalization, Operations and Procurement to bring Harmonization, developments and updates of standards to implementation. You drive an attitude of curiosity, innovation and Engineering perfection. We are looking for an Individual who can work in a global organization and is able to deliver on time quality results. This role demands technical knowledge and experience with our compressor packages to engineer and deliver purpose-built products for our traditional and emerging markets What You Bring Bachelor of Science Degree in Mechanical Engineering with 5+ years of experience in Systems Engineering or Package Engineering Roles related to rotating equipment packages. You have a good technical understanding of rotating equipment trains with focus on system/package as well as instrumentation/control Proven command of industry standards and codes used for design and specification of equipment packages - notably API (614, 692 617), ASME, ASTM, TEMA, IEC and B31.3 / B 31.3 piping design. Expert in Compressor Package Engineering which includes Baseplate, Steel Structures, Coupling Guards, process coolers, AVMs, Anti Surge Systems and Knowledge of auxiliary systems (heat exchanger, lube oil unit, gas seal panel etc). Peer-recognized for solving complex problems, developing new Standards, and demonstrating high professional judgement in ambiguous circumstances Experience with Engineering/PLM software Teamcenter, SAP, NX, E3, COMOS, and/or Jira (will be an added advantage) and excellent digital literacy (MS Office, Teams, or similar environments)

Developing advanced Artificial Intelligence solutions with focus on Generative AI techniques for application along the value chain Working in cross-organizational, multi-disciplinary teams supporting the application and implementation of innovative data science and AI/ML concepts at scale Leading the implementation of AI/ML initiatives company-wide by facilitating trainings and boosting awareness. Being up to date on the latest developments in data science, AI/ML principles and theories to help the business make truly data-driven decisions Collaborating in a partner ecosystem across industry and academia to drive research and leverage know-how in this field Documenting developed methods, tools and processes as well as presenting results to customers across the organization on a regular basis. What You Bring 3 - 6 years of IT experience with Deep understanding of Gen AI solutions and their application at scale, including RAG (Retrieval-Augmented Generation), Agents, and Lang graph or similar frameworks Proven analytical skills and profound expertise in data science with a focus on Generative AI, Natural Language Processing, and other artificial intelligence methods Ability to effectively collaborate in multidisciplinary, multinational and global teams, with fluency in spoken and written English, superb communication, and presentation skills Strong customer focus, good interpersonal skills, open-mindedness, and willingness to learn University degree or equivalent experience in Computer Science, Mathematics, Physics, Engineering or related field, along with strong proficiency in programming languages such as Python and experience in solution deployment and cloud computing

Lead a team of custom developers to fulfil the growing needs of Business Unit and drive digitalization. Develop and implement strategies for growing the IT team to support digitalization needs of the business unit through digital tools and automation initiatives. Assessing the current landscape in business unit and integrating them into the formal IT structure. Act as a digital business partner, collaborating with business unit heads and partners to understand their needs and provide effective digital solutions. Drive digital transformation and operational efficiency by bringing to bear visualizations, ETL processes, and low-code management tools. Design and develop AI-based solutions that enhance service delivery and operational excellence. Ensure the successful deployment and adoption of digital tools across the organization. Provide leadership and guidance to the IT team, encouraging a culture of innovation and continuous improvement. Monitor and evaluate the performance of digital tools and automation initiatives, adjusting as necessary to achieve desired outcomes. What You Bring Bachelors or master s degree in computer science, Information Technology, or a related field. 10+ years of experience in IT, with a strong focus on software engineering and digital tools / automation for custom development. 3+ years of experience in leading a team of developers. Ability to convert business requirements into a workable digitalization initiative. Proven experience in driving digital transformation initiatives and operational efficiency. Expertise in visualizations, ETL processes, and low-code management tools. Strong leadership and team-building skills, with the ability to grow and develop an IT team. Excellent communication and collaboration skills, with the ability to work effectively with business unit heads and stakeholders. Hands-on knowledge of AI and its application in enhancing service delivery and operational excellence. Ability to manage transitions and platform migrations.

You will lead and handle the project on implementation of AI @ ESN or similar projects within Siemens Energy global procurement team, facilitate the conceptualization, completion by ensuring adequate resources are assigned, project is supervised, and status reported, coordinating between departments and Procurement managers & Procurement Heads of business verticals. You will facilitate project through design, development, training, and implementation as well as develop reporting and metrics. How You ll Make an Impact Define project scope, goals and results that support business goals in collaboration with senior management and collaborators. Optimally communicate project expectations to the team and collaborators in a timely and clear fashion. Plan and schedule project timelines and achievements using appropriate tools and track. Settle frequency and content of status reports from the project team, analyze results, and troubleshoot problem areas. Define project success criteria and disseminate them to involved parties throughout project life cycle. Develop and deliver progress reports, proposals, requirements documentation, and presentations. Proactively handle changes in project scope, identify potential crises, and devise contingency plans. Coach, mentor, empower and supervise project team members, and influence them to take positive action and accountability for their assigned work..Build, develop, and grow any business relationships vital to the success of the project. What You Bring Bachelor s degree in business management / engineering or related field with 8 years of professional work experience, minimum of 5 years direct work experience in a procurement project management capacity, including all aspects of process development and execution. Prior experience in handling global projects that affect the organizations long term goals and objectives. Change leadership skills and confirmed ability to lead change. Applies appropriate interpersonal styles and techniques to gain acceptance of ideas or plans; modifies own behavior to accommodate tasks, situations, and individuals involved Ability to read communication styles of team members and contractors who come from a broad spectrum of teams. Ability to effectively prioritize and complete tasks in a fast paced environment is essential Ability to conform to shifting priorities, demands and timelines through analytical and problem-solving capabilities.

Good Knowledge about Erection and Commissioning of Reciprocating Compressors, Drivers (Engine and Motors) and associated accessories Having sound knowledge about Trouble Shooting of Compressors, Divers and Process related issue Maintenance/ MOH of Reciprocating Compressors as per OEM manuals Site Report Preparations and Weekly time report submission. On time Submission of Field reports and associated documents after completion or site demobilizations. Ensure D-R/ SE EHS compliances at site, Awareness about PTW,TBT, LOTO, Process Isolation and HIRA. Travel 80% Spare Parts recommendations basis on maintenance requirement Customer Handling Crew Handling What You Bring Should be having B.Tech (Mechanical Engineering) Minimum 8 Year working experience at least 2 Years on Reciprocating Compressors in Oil and Gas Field. Having good soft skills (MS Office, MS Word, MS Excel, Power Point) Basic Knowledge about EHS practice at Oil and Gas field

Order related representation of the Instrumentation & Control Engineering. Preparing Instrument datasheets, P&ID s, Instrument List and wiring Diagrams. This role is responsible for maintaining the data model together with other project members and content provider, mainly System Engineering in COMOS PT. Design and specify Unit Control Systems and Low Voltage Wiring systems which compliment Rotating Machinery used in Industrial Applications - namely compression, power generation and Oil-Gas. Detailed SCADA/I&C design drawings including control panel layout, I/O termination, control panel power distribution, instrumentation installation, motor control schematics, hardwired backup control circuits, single line diagrams. Creation of export files as requested by digitalization specification in different formats, e.g.,ISF, CFIHOS Standards. Innovate, creatively apply lessons learned, and implement cost-effective solutions for COMOS PT development, requirements management, that prevent non-conformances during Project Execution. What You Bring Bachelor of Engineering Degree in field (Instrumentation / Controls / Electronics) , Diploma (State-certified technical engineer) with proven experience shall also be considered. Minimum 1 years of experience in Rotating Equipment for Oil & Gas, Petrochemical, and other Process Industry applications, achieved through working on Industrial Applications Products in Controls and Instrumentation Engineering. Experience in Electrical Equipment and experience in Services - Installation & Commissioning Engineering shall be considered. Application experience with objects oriented Engineering Software e.g., COMOS PT. Know-how of standards: API 670 (Machinery Protection System), IEC 60079 (Explosive Atmosphere Standards), DIN EN 60617 (Graphic Symbol Standards). Good Analytical & Cross-cultural abilities.

Developing commercial and technical proposal relative to revamp and upgrade on OEM and Non OEM compressor product and associated ancillary package equipment. Supporting technical offer in front of customer from initial concept until the Purchase Order and beyond. Building technical and commercial proposal in accordance with customer request and Order Capture Team strategy. Performance computation and technical solution on compressors. Technical feasibility and risk evaluation: define and validate hard point with the product engineering support. Prepare and issue Request for Quotations to the relevant major sub-suppliers in support of Siemens Energy bundled extended scope solutions. Collaborating closely with other functions within the organization to gather / collect required information to prepare quotation for extended scope projects (e.g. site execution, repair centre activity, installation, commissioning performance testing). Defining the commercial according to organization s policies and rules (Price, payment term, TC s etc) Assisting the CFT (Client Facing Team) in improving the Value Proposition through data from the sales team. Supporting and attending meeting with customer. Defining the order entry package document according to internal standard (Scope of supply and Cost Price makeup) Reporting and updating the management on project status, development and difficulties. Maintaining internal database and process (Client Service database, MBR, etc). Technical support to the client facing team and internal Siemens Energy resources for aftermarket activities. What You Bring A sound Bachelor s Degree, or Professional Degree in Engineering (Mechanical / Oil Gas) Proven experience as Proposal /Estimation Engineer or related work experience. Sound knowledge in Compressor Product(knowledge of centrifugal and reciprocating compressor design will be an added advantage). Knowledge and experience of turbo machinery equipment (Centrifugal/reciprocating compressors) aero/ thermodynamic performance as well as in control systems is a plus Good understanding of machine design, thermodynamic principles and compressor performance application theory Good presentation, relationship and team membership skills Excellent communication and organization skills, requires time management and record keeping detail. Ability to work with Microsoft Office suite of business programs and regular user of all system tools available to the Sales Technical Support functions (e.g. CRM,SFDC etc) Flexible working time required

We are looking for a multifaceted, strategic, and results-driven Global Marketing Communications Manager to lead marketing and communications initiatives across Southeast Asia, India, and China. This role will be pivotal in performing and aligning marketing and communication strategies to elevate our brand presence, drive engagement, and improve the customer experience in these key markets. You will work with global and regional teams to create impactful, targeted content, handle external and internal communications, and support business growth across the region. Your work will directly support leadership, sales teams, and local market needs, ensuring a unified and compelling brand message that resonates with diverse audiences How You ll Make an Impact Serve as the regional point of contact for content creation, working alongside the distributed team to develop impactful, market-relevant materials (press releases, case studies, social media posts, videos, presentations, etc.) that reflect the company s objectives and priorities. Own the planning and execution of regional and local events, ensuring that both internal and external events align with the company s global strategy. Act as a brand ambassador at these events, ensuring consistent messaging and a positive representation of the company. Supervise the region s presence on digital platforms, including social media, internal communication platforms, and digital channels. Maintain consistent engagement and prioritize content and communication. Lead the execution of digital marketing campaigns that drive engagement, enhance brand visibility, and generate demand through targeted online channels. Work closely with sales, product, and leadership teams to ensure flawless communication and alignment between global strategies and local market execution. Cultivate the company s values and vision in all regional initiatives. Ensure the companys brand is accurately represented across all communication channels and platforms in the region, maintaining global consistency while adapting to local market needs. Lead and support crisis communication efforts for the region, ensuring swift, effective, and coordinated responses to media inquiries, internal communications, and reputation management. What You Bring Undergraduate degree or higher in Marketing, Communications, Business, or a related field. MBA or advanced degree is a plus. Minimum of 15 - 18 years of experience in global marketing and communications, with a focus on Southeast Asia, India, or China. Proven experience in developing and driving marketing campaigns, both digital and traditional, across multiple channels. Strong background in crafting and curating content, including press releases, social media posts, blogs, and multimedia. Deep understanding of digital marketing trends, social media engagement, and the ability to demonstrate digital tools for maximum impact. Passionate about storytelling through digital and online platforms