1413 Quality Inspection Jobs - Page 34

Key Responsibilities: Quality Management System (QMS) Development: Develop, implement, and manage the companys Quality Management System (QMS), ensuring compliance with industry standards such as ISO 9001, IEC, UL, and other relevant certifications. Team Leadership: Lead and manage the quality department, including quality engineers, technicians, and inspectors. Provide mentorship, training, and development opportunities to build a high-performing team. Quality Assurance & Control: Oversee the entire quality assurance process, including raw material inspection, in-process quality checks, final product testing, and customer feedback analysis. Ensure that all products meet or exceed customer expectations and regulatory standards. Process Improvement: Drive continuous improvement initiatives within the manufacturing process using methodologies like Lean, Six Sigma, and root cause analysis to reduce defects, improve yield, and optimize efficiency. Inspection & Testing: Oversee all product inspections and testing procedures (electrical, mechanical, visual, etc.), ensuring products pass all quality tests (e.g., I-V curve testing, EL testing, mechanical stress tests) before shipment. Non-Conformance Management: Manage the non-conformance process, including investigating and resolving quality issues, initiating corrective actions (CAPA), and ensuring that quality improvements are sustained. Supplier Quality Management: Work closely with suppliers to ensure the quality of raw materials and components meets specifications. Evaluate and monitor supplier performance, and collaborate on quality improvements when necessary. Customer Quality Feedback: Analyze customer complaints, warranty claims, and returns to identify quality issues, propose corrective actions, and work cross-functionally with engineering and production teams to prevent recurrence. Audit & Compliance: Lead internal and external audits of the manufacturing processes and ensure compliance with quality, safety, and environmental regulations. Prepare documentation and reports for audits, and ensure that the company is always audit-ready. Reporting & Documentation: Provide regular quality performance reports to senior management, detailing key performance indicators (KPIs), defect rates, process improvements, and cost reductions. Training & Development: Develop and implement quality training programs for all relevant staff, ensuring the team is fully knowledgeable about quality procedures, standards, and expectations. Customer & Regulatory Compliance: Ensure products meet customer specifications and all regulatory requirements, including industry standards (IEC, UL, CE, etc.), environmental regulations, and safety standards. Risk Management: Identify and mitigate potential risks in the manufacturing process, including quality, safety, and compliance risks, and develop contingency plans to ensure continuity and product quality. Skills & Qualifications: Bachelors degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering , or a related field. Masters degree or equivalent qualifications in quality management is a plus. Minimum of 5-7 years of experience in a quality management role, with at least 3 years in a managerial position , preferably in solar module manufacturing or a similar high-tech manufacturing environment. Strong knowledge of solar module manufacturing processes , including solar cell production, lamination, testing, and assembly. Proven experience in implementing and managing Quality Management Systems (QMS) , such as ISO 9001, and knowledge of industry standards (IEC, UL, etc.). Expertise in statistical analysis tools, statistical process control (SPC) , root cause analysis , failure analysis , and other quality improvement methodologies (e.g., Lean, Six Sigma). Excellent leadership and team management skills, with the ability to motivate and guide cross-functional teams. Strong understanding of product testing techniques for solar modules, including I-V curve testing, electrical performance testing, environmental testing, and visual inspections. Hands-on experience with data analysis tools (e.g., Minitab, JMP) and quality management software (e.g., ERP, QMS systems). Strong communication skills, with the ability to communicate complex technical information to non-technical stakeholders. Ability to thrive in a fast-paced, dynamic manufacturing environment, balancing multiple priorities. Proficiency in Microsoft Office Suite (Excel, PowerPoint, Word) and other office tools. Preferred Qualifications: Six Sigma Black Belt or Green Belt certification. Experience in lean manufacturing , statistical process control (SPC) , and total quality management (TQM) . Knowledge of environmental, health, and safety (EHS) regulations in a manufacturing environment. Prior experience in managing supplier quality and conducting supplier audits. Familiarity with solar energy industry regulations and quality standards. Interested candidates can apply at hemlata.tiwari@sael.co

Responsibilities : 1. Experience in Product i.e. Plastic / Rubber /Glass Part inspection (Visual & Dimensional). 2. Good knowledge of Moulding defects. 3. Hands-on experience in measuring instruments handling like (Vernier , Micrometer, Height Gauge, Attribute gauges, Air gauges, TPG etc.) 4. Good knowledge of inspection, measurement techniques, GD&T. 5. Ability to read Blueprints/Drawings. 6. Good written & verbal communication skills Other Requirement : 1. Aggressive Attitude. 2. Willing to stay near the plant location. 3. Medically fitness mandatory. 4. Work Discipline (Safety, Quality). 5. Communication on daily work management to Client SPOC person/ Project Leader

Responsibilities : 1. Experience in Product i.e. Sheet Metal / Staming Part inspection (Visual & Dimensional). 2. Good knowledge of Stamping defects / welding defects / paining defects /Coating defects. 3. Hands-on experience in measuring instruments handling like (Vernier , Micrometer, Height Gauge, Attribute gauges, Air gauges, TPG etc.) 4. Good knowledge of inspection, measurement techniques, GD&T. 5. Ability to read Blueprints/Drawings. 6. Good written & verbal communication skills

Role & responsibilities Lab testing experience. Inspection schedule as per client call. Inspection of products as per AQL 1.0 & IS 2500-2000. Inspection check sheet & Tech specs will be provided by client. Checking the products as per drawing (Aesthetics & Dimensional) Making separate reports for different supplier. Bi-Annually audit of respected supplierss Taking CAPA reports of rejections found during inspections from supplierss Making good behaviour between suppliers & clients. Process knowledge like plating, lacquering & powder coating. Auditing exposure like vendor audit, 5s audit, product audit, process audit. Knowledge about quality control plan. Awareness about raw material standards. Knowledge about 8D, CAPA report. 7QC tools. Quality, QA & QC knowledge. Calibration activity and its documentation. Instruments knowledge & their LC. Interested candidates please share CV on sayeeda.pathan@sgs.com

We are seeking a highly organized and experienced Sr. Engineer / Assistant Manager to lead our Quality & Store operations. This role is pivotal in ensuring efficient inventory management, warehouse operations, invoicing coordination, and logistics within our industrial robotics division. The ideal candidate will have strong technical knowledge, excellent coordination skills, and a proactive approach to process improvement. Key Responsibilities: 1. Inventory Management: Oversee daily monitoring and management of inventory for robots and spare parts. Analyze inventory trends and proactively suggest improvements to enhance inventory control methods. Prepare and submit comprehensive inventory reports to relevant stakeholders regularly. 2. Invoicing Coordination: Develop detailed invoicing plans for robots and spare parts in alignment with sales and service requirements. Collaborate closely with sales and service teams to finalize invoicing details and ensure accuracy. 3. Warehouse Management: Manage all warehouse activities, including receiving, storing, and dispatching robots and spare parts. Maintain optimal storage conditions to ensure safety, cleanliness, and preservation of inventory. Conduct periodic stock audits and physical verification to maintain inventory accuracy. 4. Logistics & Delivery Coordination: Ensure timely, accurate, and error-free delivery of products to customers. Liaise with transporters for dispatch management and shipment tracking to guarantee smooth delivery processes. 5. Demo Area Management: Oversee the setup, maintenance, and management of the office demo area to showcase products effectively. 6. Audit & Compliance Support: Support internal and external audit processes related to spare parts and robots inventory. Verify robot serial numbers and provide accurate data and documentation to the accounts team for reconciliation. 7. Procurement Support: Provide technical specifications and detailed product information to the procurement team for ordering robots and related components. Qualifications & Skills: Diploma or Bachelors degree in Mechanical, Electrical, Electronic Engineering, or a related field. 5 to 10 years of relevant experience in industrial robotics, warehouse/logistics management, or technical coordination. Strong proficiency in MS Office (Excel, Word, PowerPoint) and inventory/ERP systems. Experience with RISM_G is an advantage. Excellent communication, interpersonal, and coordination skills to manage multiple internal stakeholders effectively. Ability to work independently and suggest process improvements for inventory and warehouse management. Detail-oriented with strong organizational and problem-solving skills. Why Join Us? Be part of a cutting-edge industrial robotics environment. Work in a dynamic and collaborative team focused on quality and operational excellence. Competitive salary package and opportunities for professional growth.

Diploma in Mechanical Engineering with 2-5 years ' experience in Mechanical Engineering industries . Knowledge of measuring instruments. Having exposure of visual , Dimension and NDT inspection according to quality plan & procedure. Preferred NDT level- II, MT,DPT, RT/UT & Phased array.

Role & responsibilities - Quality Engineer Civil and Electrical - Telecom Job Location - Kolkata , 24 Pargana, Howrah Qualification Required- Diploma /Degree in Civil / Electrical Engg only Experience Required- Min 2 Year No of Requirement- 50 Civil 25 Mech and 50 Electrical Job Profile - Civil: Knowledge of Civil drawing, Layout and BBS Detail Knowledge of concrete casting Cross Checking knowledge of BBS (bar bending Schedule) Actual site VS Approved Drawing Knowledge of Cement Grade OPC and PPC also ratio M-10, M-15, M-20, M-25 Knowledge of IS code like pouring height of column, Curing timing Slum value of Pile and raft casting. Knowledge of safety PPE required during casting. Details knowledge of lining and plumbing Electrical: Knowledge of SLD, BOM Knowledge of panel, battery and DG Set and transformer Electrical PPE and tools Knowledge about conductor size, name, and usage in filed category like weasel,abc,xlpe,dog,Rabit etc Project Details - Quality Audit of Telecom Towers- only Civil/ Electrical Project Duration- 2 Years Client- Private CTC per month- 25k Please share your updated resume at amit.pandey@intertek.com Preferred candidate profile

Role & responsibilities: Inspection schedule as per client call. Inspection of products as per AQL 1.0 & IS 2500-2000. Inspection check sheet & Tech specs will be provided by client. Checking the products as per drawing (Aesthetics & Dimensional) Making separate reports for different supplier. Bi-Annually audit of respected supplierss Taking CAPA reports of rejections found during inspections from supplierss Making good behaviour between suppliers & clients. Process knowledge like plating, lacquering & powder coating. Auditing exposure like vendor audit, 5s audit, product audit, process audit. Knowledge about quality control plan. Awareness about raw material standards. Knowledge about 8D, CAPA report. 7QC tools. Quality, QA & QC knowledge. Calibration activity and its documentation. Instruments knowledge & their LC. Interested candidates please share CV on sayeeda.pathan@sgs.com

Daily inspection of raw & finish goods Calibrate with production and engineering team Implement corrective action Identify and report defects health and safety guidelines Perform sampling and product evaluation during production dispatch

1. Assist in implementing and maintaining quality control procedures and standards for construction projects. 2. Conduct inspections and quality checks at various stages of construction to ensure compliance with project specifications, codes, and standards. 3. Collaborate with project managers, engineers, and subcontractors to address quality issues and implement corrective actions. 4. Assist in the preparation and review of quality control documentation, including inspection reports, non-conformance reports, and quality assurance plans. 5. Participate in internal and external quality audits to assess compliance with regulatory requirements and industry standards. 6. Maintain accurate records of quality control activities, including documentation of inspections, test results, and corrective actions taken.

Job Description Summary As part of the GE India Multi-modal Manufacturing team, the Assistant Engineer- Quality inspector is responsible for establishing an efficient and continually improving In-process quality systems as per AS 9100 ISO 9001 and internal GE QMS norms. Own & drive key Quality deliverables in the projects including analysis & certifying aviation hardware per internal quality inspection requirements . Company Overview: Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight. Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defence and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape Indias aerospace ecosystem. Job Description Role Overview The position will report to the Quality Engineer Manager. Responsible to carry out inspections in quality per internal QMS procedural requirements. Work closely with manufacturing production & Quality system teams to develop and implement AS 9100 procedures & systems & support driving end to end production quality flow downs. Willingness to work & get qualified to Cross functional teams & quality cells along with HPT teams for daily analysis of yield improvement , EHS & process improvisation projects. Contribute to continual improvement through audit programs, assessment of various non-conformances and driving corrective actions identified through Root Cause Analysis. Understanding of site quality QMS procedures & policies. Understanding quality tools related to process yield improvement tools like RCA , KAIZENS , 7 QC tools , Defect Analysis etc. Inspecting production hardware , attending to customer complaint analysis & stock verifications where required. Providing technical analysis and evaluation both manually and automatically to assigned inspection processes. Knowledge on dimensional inspection methodologies. Addressing line quality help calls & providing solution. Providing training, and support to shop operations, design and manufacturing to assure effective Quality Assurance Maintaining awareness of the latest inspection techniques & processes and their beneficial and limiting aspects for optimum application Pursuing continuous improvement for quality & cost reductions projects. Actively contributing to non conformance event management & analysis. Sound knowledge on MRB handling procedure Stock sweep & analysis. The Ideal Candidate: Candidate would be responsible for Final inspection of the aerospace hardware. Aware about AS9100, FAI, NC, RCCA and QMS requirement Qualifications/Requirements: First Class Diploma in Mechanical Electrical Engineering 4 + Years of Experience in Production quality . DPRV Certification and DSQR for at least one prime (GE Preferred) Experience in Aviation industry in the fields of aviation quality inspection & product acceptance is added advantage, Working knowledge of AS 9100 and internal requirements. Strong working knowledge of GD&T, drawings & specifications interpretation Preferred Qualifications: Knowledge of AS 9100 or AMS , S1000 S1002 standards. Knowledge of Basic Lean and Six Sigma Methodology Working knowledge of AS 9100 and internal requirements. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward Additional Information Relocation Assistance Provided: Yes

Job Description Summary As part of the GE India Multi-modal Manufacturing team, the Assistant Engineer- Quality inspector is responsible for establishing an efficient and continually improving In-process quality systems as per AS 9100 ISO 9001 and internal GE QMS norms. Own & drive key Quality deliverables in the projects including analysis & certifying aviation hardware per internal quality inspection requirements . Job Description Company Overview : Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defense and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape Indias aerospace ecosystem. Role Overview: The position will report to the Quality Engineer Manager. Responsible to carry out inspections in quality per internal QMS procedural requirements. Work closely with manufacturing production & Quality system teams to develop and implement AS 9100 procedures & systems & support driving end to end production quality flow downs. Willingness to work & get qualified to Cross functional teams & quality cells along with HPT teams for daily analysis of yield improvement , EHS & process improvisation projects. Contribute to continual improvement through audit programs, assessment of various non-conformances and driving corrective actions identified through Root Cause Analysis. Understanding of site quality QMS procedures & policies. Understanding quality tools related to process yield improvement tools like RCA , KAIZENS , 7 QC tools , Defect Analysis etc. Inspecting production hardware , attending to customer complaint analysis & stock verifications where required. Providing technical analysis and evaluation both manually and automatically to assigned inspection processes. Knowledge on dimensional inspection methodologies. Addressing line quality help calls & providing solution. Providing training, and support to shop operations, design and manufacturing to assure effective Quality Assurance Maintaining awareness of the latest inspection techniques & processes and their beneficial and limiting aspects for optimum application Pursuing continuous improvement for quality & cost reductions projects. Actively contributing to non conformance event management & analysis. Sound knowledge on MRB handling procedure Stock sweep & analysis. The Ideal Candidate: Candidate would be responsible for Final inspection of the aerospace hardware. Aware about AS9100, FAI, NC, RCCA and QMS requirement Preferred Qualifications: Knowledge of AS 9100 or AMS , S1000 S1002 standards. Knowledge of Basic Lean and Six Sigma Methodology Working knowledge of AS 9100 and internal requirements. Qualifications/Requirements: First Class Diploma in Mechanical 2 + Years of Experience in Production quality . Experience in Aviation industry in the fields of aviation quality inspection & product acceptance is added advantage, Working knowledge of AS 9100 and internal requirements. Strong working knowledge of GD&T, drawings & specifications interpretation. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. Additional Information Relocation Assistance Provided: Yes

Job Description Summary As part of the GE India Multi-modal Manufacturing team, the Assistant Engineer- Quality inspector is responsible for establishing an efficient and continually improving In-process quality systems as per AS 9100 ISO 9001 and internal GE QMS norms. Own & drive key Quality deliverables in the projects including analysis & certifying aviation hardware per internal quality inspection requirements . Job Description Company Overview : Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defense and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape Indias aerospace ecosystem. Role Overview: The position will report to the Quality Engineer Manager. Responsible to carry out inspections in quality per internal QMS procedural requirements. Work closely with manufacturing production & Quality system teams to develop and implement AS 9100 procedures & systems & support driving end to end production quality flow downs. Willingness to work & get qualified to Cross functional teams & quality cells along with HPT teams for daily analysis of yield improvement , EHS & process improvisation projects. Contribute to continual improvement through audit programs, assessment of various non-conformances and driving corrective actions identified through Root Cause Analysis. Understanding of site quality QMS procedures & policies. Understanding quality tools related to process yield improvement tools like RCA , KAIZENS , 7 QC tools , Defect Analysis etc. Inspecting production hardware , attending to customer complaint analysis & stock verifications where required. Providing technical analysis and evaluation both manually and automatically to assigned inspection processes. Knowledge on dimensional inspection methodologies. Addressing line quality help calls & providing solution. Providing training, and support to shop operations, design and manufacturing to assure effective Quality Assurance Maintaining awareness of the latest inspection techniques & processes and their beneficial and limiting aspects for optimum application Pursuing continuous improvement for quality & cost reductions projects. Actively contributing to non conformance event management & analysis. Sound knowledge on MRB handling procedure Stock sweep & analysis. Qualifications/Requirements: First Class Diploma in Mechanical Electrical Engineering 3-4 Years of Experience in Production quality . DPRV Certification and DSQR for at least one prime (GE Preferred) Experience in Aviation industry in the fields of aviation quality inspection & product acceptance is added advantage, Working knowledge of AS 9100 and internal requirements. Strong working knowledge of GD&T, drawings & specifications interpretation The Ideal Candidate: Candidate would be responsible for Final inspection of the aerospace hardware. Aware about AS9100, FAI, NC, RCCA and QMS requirement Preferred Qualifications: Knowledge of AS 9100 or AMS , S1000 S1002 standards. Knowledge of Basic Lean and Six Sigma Methodology Working knowledge of AS 9100 and internal requirements. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. Additional Information Relocation Assistance Provided: Yes

Job Description Summary Job Description Summary As part of the GE India Multi-modal Manufacturing team, the Assistant Engineer- Quality inspector is responsible for establishing an efficient and continually improving In-process quality systems as per AS 9100 ISO 9001 and internal GE QMS norms. Own & drive key Quality deliverables in the projects including analysis & certifying aviation hardware per internal quality inspection requirements Job Description Company Overview: Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight. Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defence and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape Indias aerospace ecosystem Role Overview: The position will report to the Quality Engineer Manager. Responsible to carry out inspections in quality per internal QMS procedural requirements. Work closely with manufacturing production & Quality system teams to develop and implement AS 9100 procedures & systems & support driving end to end production quality flow downs. Willingness to work & get qualified to Cross functional teams & quality cells along with HPT teams for daily analysis of yield improvement , EHS & process improvisation projects. Contribute to continual improvement through audit programs, assessment of various non-conformances and driving corrective actions identified through Root Cause Analysis. Understanding of site quality QMS procedures & policies. Understanding quality tools related to process yield improvement tools like RCA , KAIZENS , 7 QC tools , Defect Analysis etc. Inspecting production hardware , attending to customer complaint analysis & stock verifications where required. Providing technical analysis and evaluation both manually and automatically to assigned inspection processes. Knowledge on dimensional inspection methodologies. Addressing line quality help calls & providing solution. Providing training, and support to shop operations, design and manufacturing to assure effective Quality Assurance Maintaining awareness of the latest inspection techniques & processes and their beneficial and limiting aspects for optimum application Pursuing continuous improvement for quality & cost reductions projects. Actively contributing to non conformance event management & analysis. Sound knowledge on MRB handling procedure Stock sweep & analysis. The Ideal Candidate: Candidate would be responsible for Final inspection of the aerospace hardware. Aware about AS9100, FAI, NC, RCCA and QMS requirement Qualifications/Requirements: First Class Diploma in Mechanical Electrical Engineering 4 + years of Experience in Production quality . DPRV Certification and DSQR for at least one prime (GE Preferred) Experience in Aviation industry in the fields of aviation quality inspection & product acceptance is added advantage, Working knowledge of AS 9100 and internal requirements. Strong working knowledge of GD&T, drawings & specifications interpretation Preferred Qualifications Knowledge of AS 9100 or AMS , S1000 S1002 standards. Knowledge of Basic Lean and Six Sigma Methodology Working knowledge of AS 9100 and internal requirements Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward Additional Information Relocation Assistance Provided: Yes

Develop and implement quality control plans for foundry operations. Monitor the entire casting process, from raw material inspection to final product testing. identify and analyze casting defect such as porosity, shrinkage, sand inclusion, and crack.

ROLES & RESPONSIBILITY GOLD JEWELLERY QUALITY CHECKING 1. Candidate must have good knowledge in Assessing Purity of Gold Jewellery. 2. Should have computer knowledge and Good communication skills. 3. Validate Gold Weight, Hallmark and Identifying defects and Impurities. 4. Must Maintaining Jewellery Stock Data and Reports it to Higher Authority. 5. Co-ordinate with Team Members and accomplish the Task. Qualification: Any Degree Gender: Only Female Experience: 2 to 5 years Only in Jewellery Field Age: 25 to 35 Years Salary: Best in Industry Contact: 7708214777 / WHATSAPP - 9360623700 Interview Location - Corporate Office Chennai TNagar EMAIL: careers@lalithaajewellery.com Interview Venue LALITHAA JEWELLERY MART LTD Corporate office: No 53, Habibullah Rd, T. Nagar, Chennai, Tamil Nadu 600017

Role & responsibilities : Prepare and maintain QAP, WPS, PQR, and test reports. Conduct in-process and final inspection of valves . Check dimensions, visual quality, and pressure test results. Identify and report non-conformities; follow up for corrections. Coordinate with production, welding, and design teams on quality issues. Handle final documentation for customer and third-party inspections. Maintain inspection records and update daily QC reports. Perform welding inspection and weld quality checks as per standards. Monitor welding process and verify welder qualifications. Must know how to read and interpret welding symbols and drawings. Should be familiar with ISO, ASME, IBR. API procedures, work instructions, standards Must have strong experience in QC Documentation . Skills Required: Hands-on experience with measuring instruments (Vernier, Micrometer, PMI. etc.). Knowledge of NDT processes (DPT, MPI, RT is a plus). Good understanding of valve components, pressure testing, applicable standards Good in communication and report-writing skills. Preferred candidate profile : Candidate with valve background or Industrial Equipment Machine.

Key Purpose of the Role To lead the implementation of inspection protocols and deploy field test kits at briquette and pellet processing units, ensuring on-site quality verification and adherence to specified standards for biomass fuel under the Green Energy initiatives. Responsibilities Field Inspection & Quality Monitoring: Field Test Kit Deployment & Management: Data Reporting & Documentation: Compliance & Improvement: What Key Tasks will be involved 1. Field Inspection & Quality Monitoring: a. Conduct regular site visits to briquette and pellet production units for inspection and sampling. b. Use field test kits to measure key parameters such as moisture content, calorific value (where applicable), ash content, and size consistency. c. Train plant operators and quality staff on the use and calibration of field test kits. d. Validate field results against lab-based quality benchmarks and report discrepancies. 2. Field Test Kit Deployment & Management: a. Implement and standardize the use of field test kits across multiple processing locations. b. Ensure availability, calibration, and maintenance of test kits and consumables. c. Develop user manuals, SOPs, and training modules for test kit operation. d. Evaluate and suggest upgrades or replacements for outdated or inefficient kits. 3. Data Reporting & Documentation: a. Record, compile, and analyze test data from field inspections. b. Submit timely reports to central QA team and management, highlighting quality trends and deviations. c. Maintain records of corrective actions taken at sites with non- compliance. 4. Compliance & Improvement: a. Ensure briquette and pellet producers comply with quality parameters outlined. b. Recommend process or material changes to improve product quality based on field data. c. Assist in developing a decentralized quality verification framework to support remote and rural units Opportunity Opportunity to work with a fast-growing company in a priority bio- energy sector Work with a highly engaged & motivated team Report To Manager Green channel Program Ideal Candidate Profile Area Criteria Expectations General Background Experience 24 years in field-based quality inspection, preferably in renewable energy, biomass, or agri-processing sectors Additional certification in Quality Control or Biomass Energy is a plus Technical Competency Knowledge Proficient in QA tools (e.g. RCA) and MS Office. Any Specific Need Strong knowledge of biomass briquette and pellet standards. Familiarity with sustainability and environmental compliance. Good communication and negotiation skills. Willingness to travel to vendor and plant locations regularly. Presentation/ Communication Skills Written and verbal communication, Communicate well with both external and internal customers Soft Skills Interpersonal Skills Hands-on experience with moisture meters, calorimeters, and basic lab instruments. Ability to troubleshoot and train users on field testing equipment. Strong observation, documentation, and analytical skills. Comfortable with field travel and rural deployment. KPI Measurable Key Performance Indicators (KPIs): % of units using field test kits as per SOP Accuracy and reliability of field test results vs. lab results No. of site staff trained on test kit usage Reduction in quality-related complaints from buyers/end users Turnaround time for reporting and corrective actions

Roles: Quality Assurance & Inspection Ensure that all springs meet company, customer, and industry standards. Defect Detection Identify non-conformities in raw materials, in-process production, and finished products. Testing & Verification Perform mechanical tests, dimensional checks, and surface inspections. Compliance & Documentation Maintain inspection records and ensure compliance with ISO 9001, ASTM, or other quality standards. Collaboration Work with production, engineering, and management teams to improve product quality. Continuous Improvement Participate in corrective actions, audits, and process enhancements. Responsibilities: 1. Inspection & Testing: Conduct inspections of raw materials (e.g., steel wire) for quality compliance. Monitor in-process manufacturing steps (coiling, heat treatment, grinding, finishing). Perform final product inspections before shipment. Use measuring instruments like micrometers, calipers, force testers, and hardness testers. Conduct mechanical tests (tensile, compression, and fatigue testing). 2. Quality Control & Compliance: Ensure springs meet dimensional accuracy, strength, and surface finish requirements. Follow quality control standards (ISO 9001, ASTM, or customer specifications). Implement sampling and statistical quality control methods (SPC). 3. Documentation & Reporting: Maintain records of inspections, defects, and corrective actions. Prepare and submit quality reports to supervisors. Assist in audits and compliance checks. 4. Defect Management & Process Improvement: Identify defects and recommend corrective actions. Work with production teams to minimize scrap and rework. Suggest improvements in manufacturing processes to enhance quality. 5. Safety & Equipment Maintenance: Follow workplace safety rules and use personal protective equipment (PPE). Ensure inspection tools and measuring instruments are calibrated and well-maintained Preferred Candidates: BE Mechanical/ Diploma Mechanical/ITI Multilingual If you are interested you can share me your resume Whatsapp- 8884101801 Mail- hr@pavithrasprings.com

Roles: Quality Assurance & Inspection Ensure that all springs meet company, customer, and industry standards. Defect Detection Identify non-conformities in raw materials, in-process production, and finished products. Testing & Verification Perform mechanical tests, dimensional checks, and surface inspections. Compliance & Documentation Maintain inspection records and ensure compliance with ISO 9001, ASTM, or other quality standards. Collaboration Work with production, engineering, and management teams to improve product quality. Continuous Improvement Participate in corrective actions, audits, and process enhancements. Responsibilities: 1. Inspection & Testing: Conduct inspections of raw materials (e.g., steel wire) for quality compliance. Monitor in-process manufacturing steps (coiling, heat treatment, grinding, finishing). Perform final product inspections before shipment. Use measuring instruments like micrometers, calipers, force testers, and hardness testers. Conduct mechanical tests (tensile, compression, and fatigue testing). 2. Quality Control & Compliance: Ensure springs meet dimensional accuracy, strength, and surface finish requirements. Follow quality control standards (ISO 9001, ASTM, or customer specifications). Implement sampling and statistical quality control methods (SPC). 3. Documentation & Reporting: Maintain records of inspections, defects, and corrective actions. Prepare and submit quality reports to supervisors. Assist in audits and compliance checks. 4. Defect Management & Process Improvement: Identify defects and recommend corrective actions. Work with production teams to minimize scrap and rework. Suggest improvements in manufacturing processes to enhance quality. 5. Safety & Equipment Maintenance: Follow workplace safety rules and use personal protective equipment (PPE). Ensure inspection tools and measuring instruments are calibrated and well-maintained Preferred Candidates: BE Mechanical/ Diploma Mechanical/ITI Multilingual If you are interested you can share me your resume Whatsapp- 8884101801 Mail- hr@pavithrasprings.com

Hiring for a Quality Analyst (technical Voice support) Skills - Hands-on exp in Service desk and ticketing tools Minimum 2 years exp as a QA CTC - Up to 6LPA Location - Pune Graduates only US Shifts Immediate joiners DM - 8529546798 (Divisha)

Role & responsibilities Knowledge of acrylic fiber testing and textile lab instrument handling. Textile lab working experience Familiar of TPM activity Skillset Computer : SAP ,NOW,MS office, Experience & Qualification: Years Experience: 1 to 2 Years Qualification: Diploma Textile

Position: Quality Engineer Location: Ahmedabad, Pirana (From our Aesthetic and Elegant Office) Department: Quality Control Salary: (2.40 - 4.0) LPA Type: Full-time About Us: At PressureJet Systems , we dont just deliver machineswe deliver excellence. As one of Indias leading high-pressure plunger pump manufacturers, we are on a mission to build an organization that thrives on innovation, integrity, and industrial leadership. We believe that Quality is not an act, its a habit —and if you feel the same, you might be the perfect fit for our team. We’re looking for a sharp-eyed, process-oriented Quality Engineer who’s ready to take ownership of our quality assurance processes. If you are passionate about engineering precision, problem-solving, and making things better every single day—let’s talk. The Role: As a Quality Engineer , you will ensure that every component and process aligns with our commitment to top-tier quality. From supplier quality assurance to in-process checks, you will play a critical role in delivering products that exceed customer expectations. You’ll work closely with cross-functional teams including Design, Production, Stores, and Assembly, and report directly to the Quality Head . Your insights and actions will directly impact our reputation for excellence across global markets. Key Responsibilities: Quality Planning & Execution • Prepare and implement in-process and final inspection plans aligned with control plans and drawings. • Ensure quality parameters are followed during production and testing phases. Defect Identification & Resolution • Identify, document, and analyze quality issues across components, assemblies, and systems. • Use Root Cause Analysis tools (5 Why, Fishbone, etc.) and implement CAPAs (Corrective & Preventive Actions). Supplier Quality Management • Perform incoming inspection of critical components. • Work with suppliers to resolve quality issues and improve part consistency. Documentation & Compliance • Maintain quality records, inspection reports, NCRs, and audit documents in accordance with ISO systems. • Support internal and external audits with data and evidence-based reporting. Continuous Improvement • Lead or participate in Kaizen initiatives and quality improvement projects. • Use data-driven techniques (Pareto, Trend Charts) to reduce rework and rejection rates. Team Coordination • Train operators and QC inspectors in inspection techniques and quality awareness. • Coordinate with Engineering and Production teams to develop quality checkpoints and test protocols. Required Skills and Competencies: Engineering Drawing Interpretation: Strong ability to read and understand complex drawings, including GD&T symbols. Inspection Tools Mastery: Proficient in using micrometers, vernier calipers, bore gauges, height gauges, and other precision tools. Problem-Solving Ability: Quick identification of quality issues with effective resolution and process feedback. Process Auditing: Exposure to ISO 9001:2015, process audits, and documentation. Data-Driven Decision Making: Knowledge of using statistical tools and root cause analysis. Ownership & Collaboration: Strong communication, report writing, and coordination skills across departments. What Makes You Our Perfect Match? Experience: • 1 – 4 years of hands-on experience in Quality Engineering (preferably in precision machining or pump manufacturing industry) Qualification: • BE/BTech or Diploma in Mechanical or Production Engineering Knowledge: • MS Excel, ERP, Control Charts, 7 QC Tools • ISO 9001 Quality Management System • CAPA Tools, 5 Why Analysis, Pareto Analysis • Experience with CMM, Profile Projector or Digital Height Gauge is a plus Physical Requirement: • Must be willing to work on shop floor and conduct physical inspections as needed, Should also be open for Vendor Visit as per the requirements. Why You’ll Love Working with Us: High-Impact Role – Directly influence product quality, customer satisfaction, and brand credibility • Continuous Learning – Training on advanced tools and global quality standards • Empowered Teams – Your voice matters, and your ideas will be implemented • Dynamic Culture – Friendly, open, and innovation-driven work environment "Join PressureJet Systems and help shape the future of Indian manufacturing with world-class quality practices. Let’s put BHARAT on the global map through engineering excellence and uncompromised quality."

Steel Plant Quality Inspection experience is mandatory Verification/Review of QAP, Provide corrections, improve plans at vendor site Supervision of welding/NDT report Knowledge of relevant IS Codes & Structural Engineering Construction Specification

Serve as the single point of contact for all quality-related matters for the Duluth account. Ensure strict adherence to Duluths quality standards during development, production, and shipment stages. Oversee all quality inspectionsinline, final, and third-partyat the unit level. Work closely with QA teams, production teams, and merchandising to ensure smooth execution. Review and align PP samples, Photo Shoot samples, size sets and pilots with Duluth quality expectations. Coordinate with central QA and development teams to ensure product consistency and risk mitigation. Track all quality KPIs and drive continuous improvement initiatives at the factory level. Manage buyer audits and external inspections, ensuring timely resolution of any non-conformities. Drive RCA and CAPA implementation for any rejections, claims, or audit findings.