Solar Design Engineer and HV Substation Design Engineer (Rooftop / Ground-Mounted Solar Projects) Primary Role: Responsible for the design, engineering, and optimization of solar PV systems to ensure maximum efficiency, safety, and cost-effectiveness. Responsible for planning, designing, and engineering of high-voltage substations (AIS/GIS) including layout, protection, control, and integration with the grid. Key Responsibilities: System Design : Prepare PV system designs (rooftop/ground-mounted) including array layouts, single-line diagrams (SLD), and electrical drawings. Software Simulation : Use tools like PVsyst, Helioscope, AutoCAD, or SketchUp for energy yield assessment, shading analysis, and design validation. Electrical Sizing : Calculate cable sizing, inverter sizing, protection devices, earthing, and lightning protection. Compliance : Ensure designs follow IEC/IS codes, CEA regulations, DISCOM/CEIG requirements, and net-metering policies. BOQ Preparation : Prepare bills of quantities and technical specifications for procurement. Site Assessment : Conduct site visits, evaluate feasibility, and optimize system design based on available area, tilt, and shading. Coordination : Work with EPC teams, contractors, and clients for design approvals and execution. Performance Analysis : Monitor system performance post-installation and suggest improvements. Substation Layout Design : Develop physical layouts, equipment arrangement (transformers, breakers, isolators, busbars, control rooms). Single Line Diagram (SLD) & Schematics : Prepare electrical schematics, protection schemes, interlocking, and control wiring diagrams. Equipment Sizing & Specification : Select and size transformers, CT/PTs, circuit breakers, surge arresters, isolators, earthing, and cabling. Protection & Control Systems : Design protection relays, SCADA systems, metering, and automation systems. Grounding & Earthing : Design earthing systems as per IEEE/IS standards, step and touch potential calculations. Short-Circuit & Load Flow Studies : Perform studies using ETAP, DIgSILENT, or PSCAD to validate protection and equipment ratings. Compliance & Standards : Ensure designs adhere to IEC, IEEE, IS, CEA, and utility/grid codes. Civil/Structural Coordination : Coordinate with civil team for foundations, cable trenches, and structural drawings. Documentation & Approvals : Prepare detailed engineering documents, technical specifications, and liaise with utility/consultant for approvals. Testing & Commissioning Support : Assist site teams during erection, testing, and commissioning. Skills Required: Strong knowledge of electrical engineering fundamentals. Proficiency in PV design software (PVsyst, Helioscope, AutoCAD, ETAP optional). Knowledge of solar panel, inverter, and BOS (Balance of System) components. Understanding of utility/grid interconnection requirements. Strong background in Power Systems and High Voltage Engineering. Proficiency in design tools (AutoCAD, ETAP, DIgSILENT, PSCAD). Knowledge of AIS/GIS technologies and grid codes. Familiarity with protection schemes (distance, differential, overcurrent, etc.). Strong documentation and coordination skills.
Key Responsibilities: Record day-to-day financial transactions in books of accounts. Maintain ledgers for accounts payable and accounts receivable. Prepare and process invoices, receipts, and payments. Reconcile bank statements regularly. Assist in payroll processing and staff reimbursements. Support in preparing basic financial reports and statements. Ensure all financial records are accurate and up to date. File and organize accounting documents for easy retrieval. Assist senior accountants in audits and tax filing. Requirements: Bachelor’s degree in Commerce, Accounting, or Finance (preferred). Basic knowledge of accounting principles and practices. Familiarity with accounting software (e.g., Tally, QuickBooks, or MS Excel). Good numerical and analytical skills. Attention to detail and accuracy. Ability to maintain confidentiality of financial data.
Job Summary: We are seeking a detail-oriented and skilled Electrical Draftsman for our solar projects to join our engineering team. The ideal candidate will be responsible for creating detailed electrical drawings, schematics, and layouts for new and existing projects, working closely with engineers and project managers. The draftsman will use computer-aided design (CAD) software to ensure precise documentation that complies with industry standards, project specifications, and safety regulations. Key Responsibilities: Create and update a variety of electrical drawings, including schematics, single-line diagrams (SLDs), wiring diagrams, and general arrangement (GA) layouts. Develop and modify detailed electrical plans for lighting, power distribution, cable routing, earthing, and fire alarm systems. Collaborate with electrical engineers, architects, and other stakeholders to interpret technical specifications and design requirements. Revise drawings based on red-line markups, engineering changes, and project updates to ensure accurate, up-to-date documentation. Ensure all electrical drawings and layouts adhere to relevant industry standards (e.g., IEC, IEEE) and local electrical codes. Maintain an organized system for project files, including drawing databases, revisions, and document control procedures. Assist in the preparation of Bill of Materials (BOM) by providing accurate component and material counts based on the drawings. Conduct site visits as needed to gather field information, verify design requirements, and ensure accurate "as-built" drawings. Support project teams by providing technical interpretation of electrical drawings and assisting in the resolution of design challenges. Qualifications: Diploma or degree in Electrical Engineering, Drafting, or a related technical field. Proven experience as an Electrical Draftsman or in a similar role within the electrical contracting, construction, or manufacturing industry. High proficiency in CAD software, including AutoCAD, and preferably additional software like Revit or MicroStation. Solid understanding of electrical design principles, symbols, schematics, and industry standards. Experience with BIM (Building Information Modeling) processes is an advantage. Ability to read and interpret technical drawings and project specifications. Skills: Attention to detail: Excellent precision and accuracy in creating technical drawings. Communication: Strong verbal and written communication skills for collaboration with engineers and project teams. Technical expertise: Knowledge of electrical systems, power distribution, and relevant codes. Problem-solving: Ability to identify and resolve design discrepancies and issues. Organization: Strong organizational skills to manage and track project documentation efficiently. Time management: Proven ability to manage multiple tasks and meet project deadlines.
Role & responsibilities solar project manager is responsible for overseeing all aspects of solar energy projects from conception to completion, including planning, budget and schedule management, stakeholder communication, team leadership, and risk management . Key duties involve developing project plans, securing permits, coordinating with contractors and suppliers, ensuring compliance with regulations and safety standards, and managing project financials. They are accountable for ensuring projects are completed on time, within budget, and to the required quality and safety standards. Preferred candidate profile A preferred solar project manager profile includes a Bachelor's degree in engineering preferrably electrical, multiple years of experience in renewable energy project management preferably utility scale solar, and a Project Management Professional (PMP) certification (optional). Key skills are strong leadership, risk management, and financial planning, along with technical knowledge of solar systems, engineering, and relevant software like PVsyst.
Role & responsibilities : Financial administration : Process invoices, payments, and expense reports; reconcile accounts and manage petty cash; and maintain accurate financial records. Financial reporting : Assist with budget preparation, create financial statements, and prepare tax filings. Payroll management : Calculate and process employee wages and ensure timely and accurate payroll disbursements. Administrative support : Manage office supplies, coordinate meetings and travel, and handle general correspondence. Compliance and reporting : Ensure compliance with financial regulations and internal policies; liaise with auditors and government bodies. Preferred candidate profile : Accounting and financial skills : Proficiency in accounting principles, bookkeeping, accounts payable/receivable, and tax preparation. Software proficiency : Expertise in accounting software (e.g., QuickBooks, Tally, Zoho) and Microsoft Office Suite, especially Excel. Organizational skills : Strong ability to manage multiple tasks, stay organized, and maintain detailed records. Communication skills : Excellent written and verbal communication for internal and external correspondence, and for coordinating with various parties. Attention to detail : Impeccable accuracy is crucial for handling financial data and ensuring compliance. Problem-solving : Ability to identify and resolve discrepancies in financial data.
Solar Design Engineer and HV Substation Design Engineer (Rooftop / Ground-Mounted Solar Projects) Primary Role: Responsible for the design, engineering, and optimization of solar PV systems to ensure maximum efficiency, safety, and cost-effectiveness. Responsible for planning, designing, and engineering of high-voltage substations (AIS/GIS) including layout, protection, control, and integration with the grid. Key Responsibilities: System Design : Prepare PV system designs (rooftop/ground-mounted) including array layouts, single-line diagrams (SLD), and electrical drawings. Software Simulation : Use tools like PVsyst, Helioscope, AutoCAD, or SketchUp for energy yield assessment, shading analysis, and design validation. Electrical Sizing : Calculate cable sizing, inverter sizing, protection devices, earthing, and lightning protection. Compliance : Ensure designs follow IEC/IS codes, CEA regulations, DISCOM/CEIG requirements, and net-metering policies. BOQ Preparation : Prepare bills of quantities and technical specifications for procurement. Site Assessment : Conduct site visits, evaluate feasibility, and optimize system design based on available area, tilt, and shading. Coordination : Work with EPC teams, contractors, and clients for design approvals and execution. Performance Analysis : Monitor system performance post-installation and suggest improvements. Substation Layout Design : Develop physical layouts, equipment arrangement (transformers, breakers, isolators, busbars, control rooms). Single Line Diagram (SLD) & Schematics : Prepare electrical schematics, protection schemes, interlocking, and control wiring diagrams. Equipment Sizing & Specification : Select and size transformers, CT/PTs, circuit breakers, surge arresters, isolators, earthing, and cabling. Protection & Control Systems : Design protection relays, SCADA systems, metering, and automation systems. Grounding & Earthing : Design earthing systems as per IEEE/IS standards, step and touch potential calculations. Short-Circuit & Load Flow Studies : Perform studies using ETAP, DIgSILENT, or PSCAD to validate protection and equipment ratings. Compliance & Standards : Ensure designs adhere to IEC, IEEE, IS, CEA, and utility/grid codes. Civil/Structural Coordination : Coordinate with civil team for foundations, cable trenches, and structural drawings. Documentation & Approvals : Prepare detailed engineering documents, technical specifications, and liaise with utility/consultant for approvals. Testing & Commissioning Support : Assist site teams during erection, testing, and commissioning. Skills Required: Strong knowledge of electrical engineering fundamentals. Proficiency in PV design software (PVsyst, Helioscope, AutoCAD, ETAP optional). Knowledge of solar panel, inverter, and BOS (Balance of System) components. Understanding of utility/grid interconnection requirements. Strong background in Power Systems and High Voltage Engineering. Proficiency in design tools (AutoCAD, ETAP, DIgSILENT, PSCAD). Knowledge of AIS/GIS technologies and grid codes. Familiarity with protection schemes (distance, differential, overcurrent, etc.). Strong documentation and coordination skills.
Role & responsibilities : 1. Procurement & Purchasing Identify, evaluate and onboard qualified suppliers for electrical and solar materials (modules, inverters, cables, BOS, switchgear, transformers, etc.). Float RFQs, prepare comparative statements, and finalize vendors based on price, technical compliance, delivery timelines, and quality. Negotiate commercial terms, warranty conditions, payment terms, and logistical requirements. Develop annual procurement plans based on project pipeline and sales forecasts. Ensure timely issuance of Purchase Orders (POs) and work orders. 2. Supply Chain & Inventory Management Maintain optimum inventory levels across central stores and project sites. Plan and monitor inbound & outbound logistics of critical electrical components. Track material consumption vs. BOQ and raise alerts on shortages or deviations. Coordinate with warehouse teams for material safety, proper storage, and periodic physical verification. 3. Vendor Management Build and manage relationships with key vendors, OEMs, and contractors. Conduct vendor audits for quality, delivery performance, and service support. Maintain vendor database, rate contracts, and SLAs for long-term supply assurance. Resolve disputes related to quality issues, delays, and contractual non-compliance. 4. Technical Evaluation (Electrical Engineering Expertise) Evaluate technical datasheets, drawings, and certifications of electrical components. Validate supplier proposals against project specifications, standards, and client requirements. Work closely with design and engineering teams to ensure material compatibility. Conduct FAT (Factory Acceptance Tests) or coordinate third-party inspection when required. 5. Cost Control & Commercial Management Analyze project budgets and align procurement costs with approved BOQ. Develop cost-saving strategies through bulk purchases, vendor consolidation, or alternative sourcing. Track price trends of copper, aluminium, PV modules, and other key materials. Ensure procurement is compliant with GST, taxation, and statutory requirements. 6. Coordination with Internal Teams Liaise with project managers, design engineers, and planning teams to understand material requirements. Ensure timely delivery of critical items to avoid site delays or project cost overruns. Provide periodic procurement status reports and dashboards to management. 7. Documentation & Compliance Prepare and maintain procurement records, contracts, inspection reports, delivery challans, GRNs, and warranty documents. Ensure purchased materials comply with IS/IEC standards and relevant safety codes. Implement procurement SOPs, risk management procedures, and quality assurance systems. 8. Logistics & Transportation Finalize transporters, negotiate freight rates, and ensure safe, timely delivery. Manage import procedures, customs clearance, and documentation (if applicable). Plan route mapping, packaging standards, and insurance for high-value equipment. 9. ERP / Software & Process Automation Use ERP systems (SAP, Tally, Zoho, Odoo, etc.) for procurement planning and MIS reports. Track POs, GRNs, vendor payments, and project-wise material allocation. Implement digital procurement practices for transparency and efficiency. Preferred candidate profile : Educational Qualification Bachelors Degree in Electrical Engineering (B.E / B.Tech Electrical). Additional certification in Supply Chain / Materials Management (desirable). MBA in Operations / Supply Chain is an added advantage. Experience 7–9 years of experience in Procurement, Vendor Management, and Supply Chain Management. Proven experience in electrical EPC, solar EPC, construction, or industrial projects . Hands-on expertise in sourcing electrical components : cables, switchgear, transformers, solar modules, inverters, BOS items, etc. Prior experience in project-based procurement and BOQ analysis preferred. Technical Skills Strong understanding of electrical materials, specifications, drawings, datasheets, and standards (IS/IEC). Ability to evaluate technical compliance and coordinate with engineering teams. Familiar with vendor audits, quality inspections, factory acceptance tests (FAT) . Knowledge of logistics planning, warehousing, and inventory control. Commercial & Negotiation Skills Strong negotiation skills with suppliers and contractors. Experience in preparing RFQs, comparison sheets, rate contracts, and long-term procurement agreements. Understanding of GST, taxation, commercial terms, warranties, and statutory compliance. Software & Tools Proficiency in ERP systems (SAP, Zoho, Odoo, Tally, etc.). Good command of MS Excel, MS Project, and analytical tools. Ability to prepare MIS reports, dashboards, and procurement forecasts. Behavioural Competencies Result-oriented with a focus on cost control and timely delivery. Strong communication, interpersonal, and vendor relationship management skills. High level of integrity, professionalism, and ethical procurement practices. Ability to work under pressure and manage multiple projects simultaneously. Leadership Qualities Proven ability to lead purchase & SCM teams. Capable of coordinating cross-functional teams (Engineering, Projects, Finance, Quality). Strong decision-making and problem-solving ability. Other Preferences Willingness to travel for vendor visits, inspections, and site coordination. Good understanding of the solar industry and upcoming technologies (preferred). Candidates from EPC / Solar / Power / Electrical manufacturing backgrounds are highly suitable.
Role & responsibilities driving residential solar adoption by generating leads, promoting the PM Surya Ghar Yojana, managing sales channels, and overseeing the end-to-end customer process from lead to installation and subsidy disbursement . Key duties include educating customers on subsidies, conducting site assessments, preparing proposals, and ensuring all documentation is submitted correctly for subsidy claims. They also need to stay updated on government policies and manage sales teams and channel partners to achieve targets. Core responsibilities Sales and lead generation: Identify and generate leads for rooftop solar projects through various channels, such as field visits, campaigns, and outreach. Scheme promotion: Clearly explain the PM Surya Ghar Yojana to potential customers, including benefits, eligibility, and the subsidy structure. Sales channel management: Develop and manage B2C sales channels, including dealers, agents, local partners, and channel partners. Customer engagement and sales: Conduct site assessments, provide customized solar solutions, prepare proposals and quotations, and negotiate deals to close sales. Project management: Coordinate with technical teams for site surveys and installations, track project progress, and ensure the timely completion of all steps from lead to commissioning. Documentation and compliance: Ensure all customer and project documentation is correctly prepared and submitted on the National Portal for Rooftop Solar for subsidy disbursement. Performance and reporting: Achieve monthly and quarterly sales targets and provide regular reports on sales performance, pipeline status, and other KPIs. Market and policy awareness: Stay updated on government schemes, policy changes, DISCOM regulations, and new product developments in the solar industry.