Role & responsibilities Ensure Instrumentation Maintenance activities are meeting the objectives of volume, quality, efficiency, safety, minimum cost, environmental and housekeeping, in accordance with the company rules and internal procedure, instructions, and objectives concerning his area of responsibility, leading the maintenance personnel, complying and enforcing and assuring the compliance of the objectives of his Team Members- Aid in Maximizing Plant Reliability. Instrumentation maintenance & Calibration DCS/PLC System Management Process Monitoring & Troubleshooting Safety & Compliance Energy efficiency & optimization Documentation & Reporting
Role & responsibilities - 1. Implementation / Electrical Maintenance 2. Meets financial objectives for Electrical Department 3. Availability of CB Plant- 97% (7 days) 4. Maintaining Quality
Role & responsibilities :- 1. To assist CPP control room for safe Startup and safe shutdown of equipment following SOP, SOCs & Work instructions and handling emergency scenario effectively by carrying out field operations. 2. Ensuring daily LLF to identify leakages, abnormality or defects in equipment, steam traps, pipes, insulation etc. and communication to DCS engineer / Shift In-charge with possible corrective actions / follow up for corrective actions, giving input for updating shutdown register for needed action. 3. Taking samples of water and steam streams from identified sampling points as per SOP. 4. Assisting control rooms for compliance to IBR rules and requirements for boiler operation and maintenance like IBR shutdown related works, hydro test, steam test, PSV, Trip, Interlocks verification etc.
Job Description : 1)Implementation/ Instrument Related Maintenance Zero CB leakage at Site -Identification of carbon, Utility leakages from different sources. Leak Mapping and timely completion of identifying leaks. Achieve Maintenance conversion cost as per budget. Planning and execution of quality work in time DCS System and Configuration. PLC System and Configuration. Instrumentation- P&ID PFD, Power Plant Operation (Turbine)- CPP. Field Instruments Calibration. Flow Measuring equipment. Pollution Monitoring Equipment. OCP Implementation. Auto Packers etc. CAPEX Implementation within budget and timeline. Execution of Capex activities as per scheduled timeline. Aligning new joiners and inputs for ensuring their readiness at the earliest. Execute preventive maintenance rather than breakdown. All expenditures are to be controlled within the yearly budget. Analysis & Control of Cost of the maintenance department. Use of standard Checklist and inspection sheet while doing maintenance ( world-class maintenance ). Following standard maintenance procedure during execution. Project execution as per timeline and within budget. Communication, Implementation & training as per audit plan in coordination with other departments. Checklist Updation and implementation of the new requirement of QMS Learning event and safety event sharing to safety dept ( 2 nos/week each section). Implementation of 5S Culture development plan for the department. Functional skills : Leadership skills Ability to analyze financial data and work accordingly. Organizational skills Knowledge of quality and safety standards Knowledge of IT and MS Office *Preference will be given to immediate joiners.
Role & responsibilities Responsible for operation & Close monitoring of WTP, ZLD & DM Plant Water treatment of raw water for use in CB, CPP and misc. Close watch to the dozing pump, water quality and accordingly set the dozing quantity. Perform all aspects of sampling, monitoring, and testing required to maintain Boiler/DM/WTP water quality, Work involves responsibility for the technical aspects of WTP operations.
Role & responsibilities Ensure that PT initiatives are deployed properly, and SOPs are followed. Any deviation from recommended practices to be taken up with plant for correction and inform to PT at head office. Data collection and analysis for deviation in yield, product quality, energy consumption, process parameters and information related to PT initiatives. To achieve excellence in process technology by being proactive and proposing to management actions/projects for the improvement of the process efficiency, product consistency, energy conservation and economics. To participate and support the manufacturing team in plant troubleshooting in terms of evaluation of new ideas, equipment and technologies. Healthy environment and communication. Effective communication Yield reports Improved processes Timely implementation of process ideas at Plants.
Role & responsibilities Through SAP, proper checking & sending hard copy to local logistic & scanned copy to HO logistic through mail Releasing material as per customer profile & requirement Through SAP as per classification norms As per sample preparation work instruction Study the customer profile and their requirements and dispatch the material accordingly Testing as per Quality Plan (including CB special testings) & customer requirements & Testing accuracy
Role & responsibilities - To conduct Classroom and On Job Safety Training. - To carry out safety inspections to identify unsafe work, unsafe condition, equipment and hazardous condition of work. - To carry out Accident/Incident investigations. - To Monitor the effectiveness & Healthiness of Fire Fighting Equipments. - To ensure the provision of all Safety PPEs for Employees and contractual workmen. - To Ensure Compliance of Applicable Govt. Regulations related to SHE. - To maintain all First-aid facilities in OHC - To maintain all documents as per ISO 45001 (OHSAS) and ISO 14001 (EMS)
Role & responsibilities Execute preventive maintenance rather than breakdown. All expenditures are to be controlled within a yearly budget. Analysis & Control of Cost of the maintenance department. Use of standard Checklist and inspection sheet while doing maintenance ( world-class maintenance ). Following standard maintenance procedure during execution. Project execution as per timeline and within budget. Communication, Implementation & training as per audit plan in coordination with other departments. Checklist Updation and implementation of the new requirement of QMS Learning event and safety event sharing to safety dept ( 2 nos/week each section). Implementation of 5S Culture development plan for the department.
Role & responsibilities Leak Mapping and timely completion of identifying leaks. Planning and execution of quality work in time- DCS System and Configuration PLC System and Configuration, Instrumentation- P&ID PFD,Power Plant Operation (Turbine)- CPP, Field Instruments Calibration, Flow Measuring equipment, Pollution Monitoring Equipment OCP Implementation, Auto Packers etc. Execute preventive maintenance rather than breakdown. All expenditures are to be controlled within the yearly budget. Analysis & Control of Cost of the maintenance department.
Role & responsibilities Head & Ensure Electrical Maintenance activities Leak Mapping and timely completion of identifying leaks. Execution of Capex activities as per scheduled timeline. Execute preventive maintenance rather than breakdown. All expenditures are to be controlled within the yearly budget.
Role & responsibilities Controls all process parameters through DCS. Histogram & run charts are monitored for key process parameters. Communicates with plant lab chemist and ensures the conforming product is diverted to the allocated silo. Equipment monitoring and coordination with the engineering team Increase filter cloth life: Maintaining required pulsing air pressure, Delta Pressure, Module inlet pressure, ensuring zero moisture carry over with air through ensuring dryer inline Reduction in consumption of operating consumables Ensure required nozzle pressure, smooth oil flow and nozzle checking by field operator in time Optimizing chemical consumption through stabilizing pelletizer operation to optimize molasses operation and ensuring the preparation of KNO3 and Molasses is as per the SOP/Process Specification Increase in yield – maintaining process parameter as per the SOC and taking corrective action as soon as the deviation is observed Ensuring zero spillages – Ensure bag filter pressure as per the SOP Reprocessing of spillages Ensuring no parallel equipment operation Maximizing gas supply to CPP
Role & responsibilities Implementation of 5S & Housekeeping & Safety Compliance Management systems as per ISO9001/IATF requirements implementations Documentation and reporting formats and ensuring team adherence to the same Adherence to maintenance schedule -PM, PDM for all equipment. Project Implementation as per proposed plan Zero CB leakage at Site - Identification of carbon, Utility leakages from different sources. Achieve Maintenance conversion cost as per budget CAPEX Implementation within budget and timeline.
Role & responsibilities Zero CB leakage at Site - Identification of carbon, Utility leakages from different sources. Achieve Maintenance conversion cost as per budget CAPEX Implementation within budget and timeline. Adherence to maintenance schedule -PM, PDM for all equipment. Project Implementation as per proposed plan Management systems as per ISO9001/IATF requirements implementations Implementation of 5S & Housekeeping Safety Compliance
Role & responsibilities Overhauling of equipment like pumps, blowers, agitator, fan, filters, chemical dosing pump, etc. PM activity of rotating equipment. PDM/Run check activity based on schedule Knowledge of Pump and motor alignment with two dial methods Identify problem and repair in minimum time & before break down
Role & responsibilities :- - To assist CPP control room for safe Startup and safe shutdown of equipment following SOP, SOCs & Work instructions and handling emergency scenario effectively by carrying out field operations. Preparing shift field logbook and ensuring effective Hand Over Taking Over during shift change over (HOTO) Ensuring trial of equipment after any maintenance / Keeping stand by equipment is ready to run condition Ensuring daily LLF to identify leakages, abnormality or defects in equipment, steam traps, pipes, insulation etc. and communication to DCS engineer / Shift In-charge with possible corrective actions / follow up for corrective actions, giving input for updating shutdown register for needed action Taking samples of water and steam streams from identified sampling points as per SOP Assisting control rooms for compliance to IBR rules and requirements for boiler operation and maintenance like IBR shutdown related works, hydro test, steam test, PSV, Trip, Interlocks verification etc.
Role & responsibilities :- Close watch to the dozing pump, water quality and accordingly set the dozing quantity Perform all aspects of sampling, monitoring, and testing required to maintain Boiler/DM/WTP water quality, Work involves responsibility for the technical aspects of WTP operations Inspect equipment regularly Clean and maintain equipment, tanks, filter beds Close monitoring of WTP/ZLD & DM area
Role & responsibilities To run and coordinate the field operation in shift to achieve targeted shift production ensuring required quality and optimizing process parameters w.r.t SOC to maximize yield performance. - Implementation of safety and environmental initiatives - Coordination of entire shift operation activities (field) to ensure targeted line-wise shift production following the production and packing planning - Quality Control - Cost Reduction Initiatives
Role & responsibilities Responsible for in process testing of Reactor & Dryer samples as per the schedule and on time feedback to production for necessary correction in the process, if needed. During and after grade change stabilization for each grade - all CB properties are to be tested, reported to DCS & all data to be entered in SAP. Performing Testing as per given unknown samples & mentioned parameter(s). Testing as per Quality Plan (including CB special testing) & customer requirements & Testing accuracy. Std. CB testing for self-calibration for DBP, IPHT & Iodine No. (With record / data), normalizations etc.