Key Responsibilities/Duties Able to carry out civil engineering design like hydraulic calculations/analysis, Civil general arrangement drawings, pipe longitudinal sections, specifications, BOQs, prepare and review tenders, detailed design/engineering of water and wastewater networks as per industry/client standards. Works independently. Has an ability to clearly understand problem, put them on paper and solve independently or with minor assistance. Can mentor new joiners. Is a team player Has previous design experience in working on KSA projects or from Middle East region or experience in drainage design from US or UK region. Attend discipline meetings, take notes and delegate actions as required. Is conversant with relevant codes and standards from UK region. Experience of leading and delivering multi-disciplinary projects an add on and can co-ordinate effectively with other disciplines. Familiarity with relevant standards and water company specifications. Ensures that the designers duties under the contract are adhered to Can perform required design activities associated with project life-cycle in line with client standards, specifications, and codes of practice as checker or approver of designs. Is familiar with preparation and review of various reports and other project documentation and can ensure that all documentation is current, accurate and in compliance as per Client requirements. Could switch between projects and regions in short span and remains effective in delivering results. Ensuring QC process is being followed, delivery to the right quality and timelines Standardising workflows based on the project requirements Drives innovation into designs Is excellent in oral and written communication. Could effectively use virtual mediums for communication like MS Teams, Skype, Mobile communication. Communicates and liaises effectively with internal and external clients, vendors, subcontractors, consultants etc. both online and offline. Recognises, defines and resolves problems within assigned area. Interprets the design risk and assumptions associated with the project and records this as the project progresses. Interprets and promotes best practice in health, safety and environmental matters. Candidate Specification BE Civil. Post Graduation in Civil or Environmental Engineering would be preferable. Having 4+years of experience in Water/wastewater Pipelines and Networks experience on UK or Middle East projects would be preferable. Chartered Engineer or working towards achieving it would be preferable. Good knowledge of the design process, engineering. Experience of working on multidisciplinary projects Good Project Management skills and knowledge of project commercial issues and constraints Excellent verbal and written communication skills Good client liaison skills Should be able to troubleshoot and guide team members Proactive and innovative approach, and able to adapt to changing scenario Software Knowledge Good experience in working on Bentley WaterGEMS, SewerGEMS, StormCAD, CivilStorm or Microdrainage or Infodrainage software. Hands-on experience in AutoCAD, Civil 3D and Navisworks Conversant with MS Word, Excel Familiar with Document management systems like SharePoint, Bentley ProjectWise and BIM360 Location : Mumbai, Bangalore, Noida We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Mumbai, MH, IN Bengaluru, KA, IN Noida, UP, IN Contract Type: Permanent Work Pattern: Full Time Market: Water Discipline: Water Job Ref: 6738 Recruiter Contact: Miloni Mehta Show more Show less

Job Title: CAD Engineer Faculty – Civil (BIM) Location: CADCENTER IEE, Kottayam Kerala Job Type: Full-Time Experience: 0–3 years (Freshers with strong technical skills may apply) Job Summary: We are seeking a passionate and technically sound CAD Engineer Faculty – Civil (BIM) to join our CADCENTER Kottayam training division. The ideal candidate will deliver training on civil CAD and BIM tools to students and professionals, provide academic support, and assist in curriculum enhancement. This is an excellent opportunity for individuals who are enthusiastic about teaching and mentoring in the field of design and engineering. Key Responsibilities: Conduct classroom and online training sessions on Civil CAD and BIM software such as AutoCAD, Revit, Navisworks, Civil 3D, STAAD.Pro, etc. Prepare training materials, lesson plans, and project assignments as per the syllabus. Provide academic guidance and resolve student queries during and after sessions. Evaluate and assess student progress through practical assignments and exams. Ensure students receive hands-on experience through project-based learning. Stay updated with the latest trends in BIM and construction design technologies. Support CADCENTER marketing efforts through seminars, webinars, and workshops. Collaborate with other trainers and technical staff to maintain quality standards. Requirements: Diploma / B.Tech / M.Tech in Civil Engineering or related discipline. Proficiency in AutoCAD, Revit (Architecture & Structure), Civil 3D, Navisworks, and STAAD.Pro. Strong communication and presentation skills. Teaching or mentoring experience preferred (not mandatory). Ability to work independently and as part of a team. Passion for education and student development. Preferred Skills: Knowledge of additional tools like Lumion, SketchUp, or Primavera is an advantage. Certification in BIM or related tools is a plus. Willingness to upgrade skills and learn new tools as per market trends. Salary: Based on qualifications and experience Job Type: On-site, Full-time If you're enthusiastic about mentoring the next generation of engineers and want to grow with a reputed education brand, CADCENTER IEE welcomes your application. Job Types: Full-time, Part-time, Permanent, Fresher Pay: ₹8,000.00 - ₹18,000.00 per month Benefits: Flexible schedule Schedule: Day shift Evening shift Fixed shift Morning shift Rotational shift Supplemental Pay: Commission pay Performance bonus Shift allowance Work Location: CADCENTER IEE KOTTAYAM Job Types: Full-time, Permanent, Fresher Pay: ₹8,000.00 - ₹18,000.00 per month Benefits: Flexible schedule Leave encashment Schedule: Day shift Fixed shift Morning shift Rotational shift Supplemental Pay: Commission pay Overtime pay Performance bonus Work Location: In person

About Us: GUVI (Grab Your Vernacular Imprint) Geek Network Private Limited is an Edu-Tech incubated by IIT-Madras, IIM-Ahmedabad, and Partnered with Google for Education. What sets us apart is the fact that we offer online learning in a plethora of different vernacular languages along with English. With more than 20+ lakh users currently learning from our platform, GUVI continues to grow at a tremendous rate. For more information about us, visit www.guvi.in Job Summary: We are seeking an experienced and knowledgeable CAD Civil Trainer with specialization in Autodesk Navisworks to join our technical training team. The ideal candidate will be responsible for delivering hands-on training, developing course materials, and supporting civil engineering professionals in mastering Navisworks for coordination, clash detection, and project visualization. Key Responsibilities: Design and deliver engaging training sessions on Navisworks with a focus on civil and infrastructure projects. Provide instruction on integrating Navisworks with CAD Civil 3D, Revit, InfraWorks , and other relevant tools. Develop custom training materials, tutorials, and user guides tailored to various skill levels. Conduct both in-person and virtual training sessions for engineers, drafters, and project managers. Support trainees in real-time project environments, ensuring effective application of Navisworks in coordination and review. Stay up to date with the latest features, best practices, and updates in Navisworks and related Autodesk products. Evaluate training effectiveness and provide feedback for continuous improvement. Collaborate with engineering and BIM teams to identify skill gaps and design appropriate training interventions. Required Qualifications: Proven experience in Navisworks Manage and/or Simulate , especially in civil and infrastructure projects. Strong background in civil engineering design software , especially CAD Civil 3D . Prior experience delivering technical training or mentoring in a corporate or academic setting. Excellent communication, presentation, and interpersonal skills. Proficiency in interpreting and teaching 3D models, clash detection workflows, and coordination techniques. Bachelor’s degree in Civil Engineering, Architecture, or a related field (or equivalent experience). Preferred Qualifications: Autodesk Certified Instructor (ACI) or equivalent certification. Experience with additional tools such as InfraWorks, BIM 360, or Revit. Knowledge of construction project workflows and data collaboration strategies. Familiarity with scripting or automation in Navisworks using plugins or APIs is a plus. Show more Show less

📢 We’re Hiring Instructors for 18 Civil Engineering Software Tools Are you an experienced civil engineer with expert-level skills in one or more industry-standard design or project management tools? Do you love teaching and want to share your skills with thousands of students and professionals through a growing education platform? We’re launching a powerful education platform for civil engineers and are looking for 18+ skilled professionals to create high-quality, industry-relevant, practical video courses on the following software tools: List of Courses & Tools: AutoCAD (2D Focused – Civil) Autodesk Revit (Architecture + Structural + MEP) Tekla Structures Navisworks STAAD.Pro ETABS Primavera P6 Synchro 4D Dynamo BIM SketchUp Bluebeam Revu 3ds Max CSI SAFE RCDC Quantity Estimation & BBS Site Engineer Expert Tools & Skills Green Building Studio (Sustainability) Autodesk Build & Construction Cloud Who Can Apply? We're looking for professionals who: Have 4 to 15 years of experience in civil engineering. Are experts in at least one of the above software tools (the one they’ll teach). Have strong subject knowledge and practical project experience with the tool. Have excellent communication skills in basic to medium English . Can clearly explain concepts, logic, and workflows. Are passionate about teaching and guiding students or professionals. Have prior teaching experience (preferred, but not mandatory). Can commit to completing the course within deadline . Understand this is a one-time project , not a recurring job or employment. ✅ Next Step: Apply Using This Google Form If you're interested and eligible, please fill out the form below completely . Incomplete forms will not be considered. LINK TO APPLY :- https://forms.gle/bVoj86yHv54pAycS7 Show more Show less

-Looking for Piping Engineer with strong expertise in AutoCAD Plant 3D, generate accurate Bill of Materials (BOM) & Material Take-Offs (MTO) -To comply with industry standards such as ASME, ANSI, API. -General Arrangement, isometric & spool drawings. Required Candidate profile - B.E/B.Tech in Mechanical or related field with 3 to 5 yrs of exp -Knowledge of P&ID development and interpretation. - Experience with equipment modeling and integration into piping systems.

Job Description: We are currently hiring talented and motivated BIM Coordinators to become a key members of our team. As a BIM Coordinator you will be instrumental in seamlessly coordinating and implementing BIM processes for BIM projects. Your role will be pivotal in ensuring the successful execution of various international projects. Role Accountabilities Communicate regularly with clients, providing project status reports. Coordinate clash detection and resolution activities, creating federated models from different discipline models. Provide oversight on workflow and address issues with clients. Support engineers in adhering to drawing standards and using BIM software. Mentor team members, assist with modeling, and address queries. Ensure the latest model is up to date and stored correctly in the project management system. Develop skills in managing large and complex BIM projects. Perform QA/QC on technical drawings before submission to the BIM Manager for final review. Oversee drawing production, ensuring adherence to company/project standards and procedures (e.g., BIM Execution Plan). If needed, provide advanced BIM training on software and processes to the team. Required Skills Ability to read and comprehend schematics, technical submittals, drawings, and project specifications. Proficiency in BIM software such as Revit, AutoCAD, and Navisworks. Experience in setting up and producing Revit models. Ensuring there are enough resources and inputs to deliver projects effectively. Ability to plan deliverables systematically. Provide input into technical standards, templates, workflows, and procedures to enhance the quality of deliverables. Facilitate BIM Standards & ISO 19650 standards development and implementation. Flexibility to work with US/Canada Region Standards. Responsibilities Apply technical knowledge and engineering production skills in a BIM environment for projects. Lead a team in BIM model and drawing production, coordinating with discipline leads of multiple disciplines. Ensure model delivery compliance with project and company standards, meeting clients' Exchange Information Requirements (EIR). Coordinate clash detection and resolution activities. Collaborate with lead engineers and other discipline leads for effective coordination. Support developing and implementing BIM Execution Plans and project delivery strategy. Assist clients in coordinating multi-discipline BIM environments for large or complex projects. Benefits Competitive Work Benefits Outstanding Career growth opportunities Exposure to International Projects in the USA and Canada regions. Exposure to work with Top General contractors across the globe. Health insurance Accidental Insurance Gratuity Show more Show less

D’man – Substation (Civil & Structural) 2D & 3D (REVIT) Reports to (Job – Role) : Design Lead Reportee (Job – Role) : - Education : Diploma / ITI in Civil Engineering. Experience : 3-10 years, experience in 2D Detailing in AutoCAD of Civil and Structural Works in Substation, Power Plants construction Industry, Oil and Gas, Fertilizer industry, Refineries. Experience in 3D REVIT (BIM) would be preferred. Objective: The Person shall carry out 2D detailing in AutoCAD of Civil & Structural works for the PT&D IC covering for Substation Projects for Voltage Levels ranging between 415V – 1200 KV. Shall be Responsible to cater to needs of all SS teams of Domestic & International Projects. The Draftsman shall also co-ordinate with other disciplines viz., Electrical and Mechanical for inter disciplinary inputs / checks. The D’man should be able to develop the 3-D model of the Buildings in BIM platform for clash checks & extracting Bill of Quantities. The D’man shall work with a team of Design Engineers, Lead Engineers to create Detailing of Engineering activities to deliver on time and maintaining a high quality of engineering. Key Responsibilities Collection of Inputs of Detailing from Design Engineers Preparation of 2D detail drawings for superstructure and foundation for all buildings, Outdoor foundations, Civil layouts, Equipment support structures. Preparation of 3D Model of Buildings and Layouts Extraction of 2D drawings from the 3D Model. Documentation of records for all the projects as per Quality Adherence to checklist of Drawings for Review purpose Submission of Drawings to design Engineer for review Corrections and Comments updated from Site Inputs Preparing BOQ based on the drawings. Technical Expertise D’man shall be capable of preparation of drawings of RCC Buildings, Structural elements, equipment structures (Steel lattice and Pipe structures), Transformer foundations, outdoor equipment foundations, guard house, staff quarters, grading, roads and drainage, cable trench, outdoor steel structures and miscellaneous works related to the substations and cabling works. D’man shall be able to review Vendor engineering drawings (layouts, fabrication drawings) with respect to Civil & Structural. Knowledge of switchyard gantry towers, equipment supporting structures & foundations. Familiarization with Detailed engineering of pre-engineered buildings. Operating Network Internally: Design Engineers, Lead Engineers. Externally: Vendors Key Performance Indicators On Time Delivery, Quality control, Quantity of deliverables (Drawings), Internal Process, Development of Skills, Innovation (New idea implementation), Value Engineering, Learning & Growth. Utilisation of BIM Platform towards Digitalisation initiatives. Software Skills Required AUTOCAD, MicroStation (for 2D drawings), REVIT 3D (BIM), Navisworks. Show more Show less

Share this job About The Company The Hitachi Energy India Operations Center (INOPC) houses over 3,000 energy transition technologists in three locations from grid automation, transformers, high voltage products, grid integration and service businesses. Spread over 3,00,000 sq feet, with nearly 50,000 sq feet of dedicated lab space, the center brings under one roof diverse engineering capability that has been built over the years, fostering collaboration to advance the world’s energy system to be more sustainable, flexible and secure. INOPC supports Hitachi Energy units across 40+ countries to deliver projects in 80+ countries. We are technology leaders at the forefront of evolving the world’s future energy system. The rising energy consumption with changing lifestyles and rapid urbanization, is driving the need for affordable, reliable and sustainable energy. Our innovative technologies help to make the energy system more resilient, secure and safe. Electricity will be the backbone of the carbon-neutral future and together, with customers and partners, we are co-creating solutions that are helping to accelerate the energy transition. Customers count on our technologies to help them to integrate huge volumes of renewable energy into the world’s grids and manage increasing levels of complexity; and our technologies are also instrumental to the electrification of transportation, industry and smart life sectors. The center equally focuses on catering to grow complexity in domestic and international grids and is a key lever for Hitachi Energy’s growth globally. How You’ll Make An Impact Preparation of Substation layouts and section drawings preparation for budgetary offers / tenders / projects based on customer specification. Preparation of Earthing layouts, Lightning Protection drawings, cable routing drawings, Erection Key diagram, Control building layouts, Illumination drawings. Prepare Bill of material of Primary related quantities for tenders or projects based on requirement Support the senior engineer with the inputs for all design calculations related to Primary & CAD Engineering Expertise in all AIS & GIS in design & drawings Basic understanding of all primary calculations, viz., Grounding system design, Lightning system design, Lighting system design Preparation of Protection SLD showing principles, relays and meters Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc Follow the QMS process and adherence to the same Responsible for maintaining and updating the documentation for respective tenders and projects as per quality process Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background Should be bachelors Engineering /Diploma in Electrical Should have 5-10 years exp Full Proficiency in required CAD design tools (BIM Tools, BIM 360, Navisworks, Microstation / AutoCAD, AutoCAD REVIT, 3D competence) and very good 3D-Designing skills Very good knowledge about technical parameters and data of the different models inside his specific discipline Knowledge of relevant international standards ex. IEEE, IEC,etc Knowledge in substation tendering and project engineering activities (technical) Team Player using in-depth knowledge in a specific area to execute complex or specialized projects / challenges often thinking independently to challenge traditional solutions. Comprehensive knowledge of related disciplines in the organization. Excellent English speaker, good communication skills Dynamic and Proactive, willing to grow in the organization Team player, ready to play the role across the different countries High level of ownership Apply now Location Chennai, Tamil Nadu, India Job type Full time Experience Experienced Job function Engineering & Science Contract Regular Publication date 2025-05-30 Reference number R0092452 Show more Show less

Build the 3D BIM models of MEP services using Autodesk Revit. Preparation of design drawings, shop drawings, as-built drawings, and schematic diagrams. Preparation of schedules and sheet lists. Prepares BOQ schedules from BIM modeling Developing and applying Revit Templates. Collaborate and coordinate with other disciplines to mitigate design challenges. Adhere to the schedule and follow BIM content standards and development procedures. Proven experience as a BIM Modeler or similar role in the construction or architectural industry. Proficiency in BIM software such as Revit, Navisworks, and AutoCAD. Strong understanding of BIM standards, protocols, and best practices. Excellent attention to detail and problem-solving skills. E ective communication and collaboration skills. Ability to manage multiple projects and deadlines simultaneously Job Type: Full-time Pay: ₹30,000.00 - ₹45,000.00 per month Schedule: Rotational shift Ability to commute/relocate: Chennai, Tamil Nadu: Reliably commute or planning to relocate before starting work (Preferred) Experience: MEP: 3 years (Required) Work Location: In person

Key Responsibilities: Develop and implement Dynamo scripts to automate repetitive tasks in Scan to BIM workflows. Create smart tools for point cloud processing, data extraction, model validation, and geometry generation. Collaborate with BIM teams to identify bottlenecks and propose automated solutions. Maintain and update a Dynamo script library for internal use and scalability. Support QA/QC teams with automation tools to check model accuracy, naming conventions, and LOD compliance. Assist in standardizing workflows and ensuring consistency across multiple projects. Document custom scripts, workflows, and troubleshooting guides. Proven expertise in Dynamo, including advanced visual scripting and Python scripting for custom nodes and complex workflows Extensive experience with the Autodesk Revit API, including strong C# programming skills for developing Revit add-ins. Strong analytical and problem-solving skills, with the ability to debug complex code and scripts Understanding of object-oriented programming (OOP) principles. Ability to work independently and collaboratively in a fast-paced environment. Requirements: Bachelor’s degree in Architecture, Engineering, Computational Design, or related field. 3+ years of experience in BIM workflows, with a focus on Scan to BIM and Dynamo scripting. Experience with database integration. Strong understanding of point cloud data, LOD standards, and as-built modeling practices. Experience with tools like Autodesk Recap, Navisworks, or Leica/Cyclone is desirable. Analytical mindset with excellent problem-solving skills. Familiarity with Agile development methodologies. Familiarity with Artificial Intelligence and related tools. Job Type: Full-time Pay: ₹40,000.00 - ₹65,000.00 per month Benefits: Provident Fund Schedule: Rotational shift Supplemental Pay: Performance bonus Work Location: In person

Principal Duties And Responsibilities Preparation of Single line Diagrams, Schematics, Wiring Diagrams, Loop Diagrams, Block Diagrams, Equipment layouts, Hazardous Area Classification layouts, Power layouts, Cable Tray/ Conduit Routing layouts, Grounding layouts, Lightning Protection Layouts, Lighting layouts, JB Layouts, Section/ Elevation drawings, I/O drawings, Installation drawings and Bulk MTO for Electrical/ Instrumentation systems within Oil & Gas projects. Fair understanding of E&I items such as Transformers, Panels, Cables, Heat Trace system, PLC’s/ RTU’s, Control Valves, Field Instruments etc… and deliverables such as Equipment/ Load list, Instrumentation list, Cable/ Panel/ Instrument schedules, Lighting Calculation, PFD’s & P&ID’s, I/O lists, PLC/ RTU Panel layouts etc.. The activities can be for FEED, Concept studies or Detailed design. It will involve both HV and LV distribution based on Client standards, International standards (NEC, API, IEC, IEEE etc..) – for US, Middle East, Europe, South East Asia regions. Coordination with other Disciplines or external Design consultants for sharing of inputs as well as carrying out Interdisciplinary checks. Awareness and adherence to QA/QC procedure. Demonstrates a strong ability to consistently meet project deadlines, showcasing a dedicated approach to task completion, including occasional flexibility in working hours when required. Shall be a committed team player who enhances productivity, takes responsibility, delegates efficiently, and excels in completing tasks. Duties may include extended, but temporary, out-of-town assignments. All other duties as assigned. Qualification Certified Draughtman’s course from a reputed institute. Diploma in Electrical Engineering would be preferred. 5-12 years of relevant experience in E&I design/ draughting in a Consultancy organisation for O&G Projects. Overseas experience as well experience in Power Sector would be an added advantage. Software Proficiency : ACAD 2D, Visual Lighting/ Dialux, Navisworks, Bluebeam Revu, PDF Xchange Editor. Experience in CadWorx, ElectroWorx and E3D would be an added advantage. Proficient in the latest version of AutoCAD, including familiarity with shortcut commands, X-ref (external references), base model files, and 3D to 2D conversion. Capable of working in both Paper Space and Model Space within AutoCAD. Knowledgeable in the use of attribute blocks, layers, system variable etc.. Awareness in use of MS office - Word/ Excel/ Outlook. Ability to work independently with lead office as part of integrated team. Skilled in handling multiple projects, interpreting client comments independently, and generating drawings from scratch with minimal mark-ups. Good written and oral communication skills. Ability to communicate in English. Self-motivated individual with keen interest to learn new skills and add value to the team/ organisation. Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Mumbai, MH, IN Noida, UP, IN Bengaluru, KA, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Oil and gas Job Ref: 5861 Recruiter Contact: Yogesh Singh Show more Show less

John Cockerill, enablers of opportunities Driven since 1817 by the entrepreneurial spirit and thirst for innovation of its founder, the John Cockerill Group develops large-scale technological solutions to meet the needs of its time: facilitating access to low carbon energies, enabling sustainable industrial production, preserving natural resources, contributing to greener mobility, enhancing security and installing essential infrastructures. Its offer to businesses, governments and communities consists of services and associated equipment for the sectors of energy, defence, industry, the environment, transports, and infrastructures. With over 6,000 employees, John Cockerill achieved a turnover of € 1,046 billion in 2023 in 29 countries, on 5 continents. www.johncockerill.com Position : CAD Designer (Skids) Job Location : Mumbai (India) Job Purpose Design assemblies and sub-assemblies in 3D and/or 2D, realization of manufacturing and assembly/assembly plans in the field of Hydrogen related to process skids, mechanics, electricity of sub-assemblies or assemblies of parts, with establishment of the corresponding nomenclatures, as part of the study of products or their manufacture, including prefabrication, manufacture and assembly and/or assembly. Key Responsibilities Receives technical input from the Design Engineer or the Technical Project Manager for the execution of the work. Starting from established specifications (contractual, codes and/or standards), produces complex overall Plans, sub-assemblies for Skid design. Produces (3D/2D) drawings of parts to allow manufacturing or tests/calculations for skid assemblies. Good understanding of various components of process skids (Vessels, heat exchangers, pumps, coolers, filters, pipes, fittings, valves, skid base frame etc. Carries out quantities of equipment, assemblies or sub-assemblies. Apply the rules, procedures and standards in force, internal or external to John Cockerill. Prepares documents, Participates in the technical follow-up at the level of the engineering study. Establish, in accordance with procedures, the answers to technical questions asked by internal customers. The candidate could be a contact person for site managers and/or manufacturing managers about technical problems. Participates in technical discussions, directly or indirectly, with the internal customer, partners. Integrates manufacturing, assembly and after-sales service feedback during order fulfillment to improve the product or correct deficiencies. Coordinates, directs and verifies the work of other designers. Ensures consistency between the different projects, both from a technical and methodological point of view Provides direct or indirect support to quality control, purchasing and sales. Establishment of BOMs and parameterization of the software (AutoCAD Plant 3D) Carry out calculations (tolerances, strength of materials, dimensions, weight, etc.) within the limits of the responsibilities entrusted by the design engineer. Participate in the technical follow-up of projects. Check the completeness of the inputs received from the Technical Project Manager and basic engineering department to proceed to their work. Creating orthometric drawing with AutoCAD Plant3D is an advantage. Respect the pipe stress analysis reports for piping hangers’ location. Issue the manufacturing documentation (mainly isometric drawings) in compliance with internal standards and contractual requirements. Provide the engineers with information needed for the project progress. Issue EBOM’s (Engineering Bill of Materials) for raw material procurement. Education And Experience You have a higher education Diploma in industrial and technical design. You have experience 12-15 years in 3D industrial design & detail Engineering Experience. You are also dynamic, motivated, willing, open-minded and have a sense of initiative. You are methodical, rigorous and concerned with quality in the execution of your tasks. You master the INVENTOR, AUTOCAD (AutoCAD PLANT 3D, Navisworks and Vault is an advantage) You have solid knowledge in Structure Modeling. Additional skills with Piping, P&ID, Equipment Modeling, GA & detail drawing is added advantage). Knowledgeable in Detailed piping isometrics extraction is an advantage. Knowledge of MS Office (Word, Excel) Understanding of professional environment in the Energy field Basic knowledge of usual codes / norms and good practice rules (ASME and EN) Mechanical drawings (cutting, machining, welding, assembly…) EBOM (Engineering Bill of Materials) Knowledge of mechanical properties of steel elements (ASME and EN) Reading of technical documentation Proficiency in English (Written / spoken). Knowledge of French language is an added advantage. Knowledge of Nx, Teamcenter is an advantage. Who We Are About John Cockerill John Cockerill is a global player in energy transition. With more than 200 years of experience in energy, industry and mobility, the company designs and integrates innovative technology to facilitate access to low-carbon energy. These technologies and associated expertise are dedicated to the production, storage, and distribution of electricity from renewable energy sources and to optimizing the efficiency of power plants. The technologies apply to steam-gas, hydraulic, hydrogen, solar, nuclear, wind and biomass energy. To complement its commitment to the fight against climate change, John Cockerill is also deploying solutions to contribute to greener mobility, to produce responsibly, to preserve natural resources and to fight against insecurity. In 2020 John Cockerill achieved a turnover of Euro 1.01 bn in 19 countries. John Cockerill, which is privately owned, employs 5,200 people worldwide, including more than 400 in India. Equal Opportunity Employer John Cockerill and all John Cockerill Companies are equal opportunity employers that evaluate qualified applicants without regard to race, color, national origin, religion, ancestry, sex (including pregnancy, childbirth, and related medical conditions), age, marital status, disability, veteran status, citizenship status, sexual orientation, gender identity or expression, and other characteristics protected by law. John Cockerill offers you career and development opportunities within its various sectors in a friendly working environment. Do you want to work for an innovative company that will allow you to take up technical challenges on a daily basis? We look forward to receiving your application and to meeting you! Discover our job opportunities in details on www.johncockerill.com Show more Show less

Company Description VR4BIM is a multidisciplinary firm offering end-to-end solutions in Architectural Design, Interior Design, Structural Design, MEP Design, followed by expert services in Building Information Modeling (BIM), ensuring seamless project coordination. We also specialize in delivering LEED and Estidama certifications, promoting environmentally responsible and high-performance buildings. Our holistic approach integrates cutting-edge technology, intelligent data management, and global standards to optimize project efficiency, enhance collaboration, and drive excellence across the entire building and infrastructure lifecycle. Role Description We’re looking for skilled BIM professionals passionate about Architecture, Interior Design, Facade, Landscape, and Structure disciplines. Open BIM Roles: 🔹 BIM Manager 🔹 BIM Coordinator 🔹 Senior BIM Modellers 🔹 BIM Architects 🔹 BIM Modellers / Engineers 🔹 Junior Modellers Qualifications Proven experience in BIM modeling, clash detection, and coordination across Architectural, Structural, and MEP disciplines Strong proficiency in Revit, Navisworks, AutoCAD, and related BIM software Ability to interpret and apply technical drawings within BIM environment Detail-oriented with strong problem-solving and multitasking abilities Bachelor’s degree in Engineering, Architecture, Interior Design, or related field Show more Show less

Hiring for Senior BIM Modeler-MEP Company Name: Innolink Digital Services Location: Madurai Experience Required: 10+ years experience in MEP services Skills : Revit , AutoCAD and Navisworks Relevant Experience in Landscape and Swimming pool projects is an added advantage. Notice Period: Immediate Joiners or 30 days preferred Qualifications and Skills Proficiency in Revit is required as it is pivotal for BIM modeling projects and ensures accurate and efficient design outcomes. Skilled in AutoCAD for creating precise design components and integrating them into comprehensive project models. Experience with Family Creation is mandatory for developing and customizing design elements tailored to specific project needs. Navisworks expertise is essential for model review, coordination, and clash detection to optimize project delivery. Project Coordination skills are necessary to facilitate seamless workflow and ensure effective collaboration among project stakeholders. Familiarity with landscape modeling to incorporate environmental aspects into the design process and deliver sustainable solutions. Experience in conducting coordination meetings to align multidisciplinary teams, address project changes, and resolve conflicts. Strong communication abilities to articulate design intentions clearly and work effectively within a diverse team environment. Roles and Responsibilities Create and manage accurate MEP BIM models using Revit and AutoCAD, ensuring alignment with project specifications and guidelines. Develop and customize Revit families to enhance model accuracy and tailor designs to specific project requirements. Coordinate with other design and engineering teams to integrate MEP models into comprehensive project designs. Conduct regular model reviews and clash detection sessions using Navisworks to maintain project quality and minimize conflicts. Participate in and lead project coordination meetings to align design efforts and address any issues promptly. Provide technical support and guidance to junior BIM modelers and facilitate skill development through mentoring. Oversee the preparation and delivery of high-quality construction drawings, ensuring compliance with industry standards. Collaborate closely with project managers to ensure project timelines and budgets are adhered to without compromising quality. Show more Show less

Summary: We are seeking a detail-oriented and experienced Revit Designer with a strong background in wood frame construction to join our design team. The ideal candidate will be responsible for producing high-quality architectural and structural models using Revit, focusing on residential and light commercial wood-framed buildings. Bold Business is a US-based leading global business processing outsourcing firm with over 25 years of experience and $7B+ in client engagements. We empower companies of all sizes to scale by providing global outsourcing talent services. Responsibilities: Develop and maintain Revit models for wood-framed structures Create detailed construction documents including plans, sections, elevations, and details Coordinate models with architectural, structural, and MEP consultants Collaborate with project managers, engineers, and other team members throughout the design and construction documentation phases Ensure all drawings adhere to relevant codes, company standards, and client requirements Participate in clash detection and model coordination meetings Update drawings and models as changes occur during design development or construction Requirements: Proven experience using Autodesk Revit in professional settings 3+ years of experience working on wood frame construction projects Strong understanding of residential/light commercial construction techniques and standards Proficient in creating families, schedules, and detailed 3D models in Revit Ability to read and interpret architectural and structural drawings Excellent attention to detail and organizational skills Effective communication and collaboration abilities Preferred Qualifications: Associate or Bachelor’s degree in Architecture, Engineering, Drafting, or a related field Experience with building codes and standards related to wood construction (e.g., IRC, IBC, NDS) Familiarity with other design tools (AutoCAD, Navisworks, Bluebeam, etc.) Experience in prefab, modular, or panelized wood construction is a plus (Bold Business recruiters always use a “@boldbusiness.com” email address and/or from our Applicant Tracking System, JazzHR. Any variation of this email domain should be considered suspicious. Additionally, Bold Business recruiters and authorized representatives will never request sensitive information in email or via text.) Powered by JazzHR DzPlHME0fu Show more Show less

Build the 3D BIM models of MEP services using Autodesk Revit. Preparation of design drawings, shop drawings, as-built drawings, and schematic diagrams. Preparation of schedules and sheet lists. Prepares BOQ schedules from BIM modeling Developing and applying Revit Templates. Collaborate and coordinate with other disciplines to mitigate design challenges. Adhere to the schedule and follow BIM content standards and development procedures. Proven experience as a BIM Modeler or similar role in the construction or architectural industry. Proficiency in BIM software such as Revit, Navisworks, and AutoCAD. Strong understanding of BIM standards, protocols, and best practices. Excellent attention to detail and problem-solving skills. E ective communication and collaboration skills. Ability to manage multiple projects and deadlines simultaneously Job Type: Full-time Pay: ₹30,000.00 - ₹45,000.00 per month Schedule: Rotational shift Ability to commute/relocate: Chennai, Tamil Nadu: Reliably commute or planning to relocate before starting work (Preferred) Experience: MEP: 3 years (Required) Work Location: In person

Summary: We are seeking a detail-oriented and experienced Revit Designer with a strong background in wood frame construction to join our design team. The ideal candidate will be responsible for producing high-quality architectural and structural models using Revit, focusing on residential and light commercial wood-framed buildings. Bold Business is a US-based leading global business processing outsourcing firm with over 25 years of experience and $7B+ in client engagements. We empower companies of all sizes to scale by providing global outsourcing talent services. Responsibilities: Develop and maintain Revit models for wood-framed structures Create detailed construction documents including plans, sections, elevations, and details Coordinate models with architectural, structural, and MEP consultants Collaborate with project managers, engineers, and other team members throughout the design and construction documentation phases Ensure all drawings adhere to relevant codes, company standards, and client requirements Participate in clash detection and model coordination meetings Update drawings and models as changes occur during design development or construction Requirements: Proven experience using Autodesk Revit in professional settings 3+ years of experience working on wood frame construction projects Strong understanding of residential/light commercial construction techniques and standards Proficient in creating families, schedules, and detailed 3D models in Revit Ability to read and interpret architectural and structural drawings Excellent attention to detail and organizational skills Effective communication and collaboration abilities Preferred Qualifications: Associate or Bachelor’s degree in Architecture, Engineering, Drafting, or a related field Experience with building codes and standards related to wood construction (e.g., IRC, IBC, NDS) Familiarity with other design tools (AutoCAD, Navisworks, Bluebeam, etc.) Experience in prefab, modular, or panelized wood construction is a plus (Bold Business recruiters always use a “@boldbusiness.com” email address and/or from our Applicant Tracking System, JazzHR. Any variation of this email domain should be considered suspicious. Additionally, Bold Business recruiters and authorized representatives will never request sensitive information in email or via text.) Powered by JazzHR 9D4LtQpqXY Show more Show less

Roles and Responsibilities Create detailed BIM models using Revit software for architecture, structure, MEP systems, and other disciplines. Collaborate with project teams to ensure accurate modeling of building designs and layouts. Develop and maintain a high level of proficiency in Revit software through continuous learning and training. Work on Dubai-based residential, commercial, and mixed-use projects adhering to local codes and specifications. Participate in clash detection and model audits using tools like Navisworks. Desired Candidate Profile 3-8 years of experience as a BIM Modeler or similar role. Diploma/ .Tech/B.E. degree from a recognized institution (Any specialization). Proficiency in Autodesk Revit Architecture, Structure, MEP; Navisworks; AutoCAD 2D; REVIT MEP; BIM Modeler; REVIT Architecture. Experience in working for Middle East projects will be an added advantage. Immediate joiners preferred .

Job Descripition Experienced in managing quality and accuracy of BIM information, ensuring they are in accordance with required standards and levels of detail Proficient in the use of Revit and Navisworks software Experience and good understanding of Structural, Mechanical and Electrical detailing using Revit including generation of 2D drawings and schedules from Revit. Should have knowledge of Pipe materials, Piping Systems and Pipe fittings. Experience in modelling of RCC and Structural Steel building elements, openings, stairs, platforms, trenches, chambers Should have knowledge of Cable trays, conduits, cable trenches and cable ducts. Modelling of roads, pavements Experienced in managing model set-up, families and worksets Producing 2D construction drawings, Details and Sections along with Schedules. Experienced in handling Point Cloud data shall be considered as an added advantage Knowledge of AutoCAD is a must. Reviewing modelling issues and Coordinate between all engineering disciplines to resolve issues and ensure delivery Candidate Specification : Diploma in Civil or Mechanical Engineering Water industry experience with UK specific experience would be preferred. Should be conversant with Autodesk Revit and AutoCAD Knowledge of Bentley ProjectWise or BIM 360 shall be considered as added advantage Good communication skills and the ability to work oneself and as part of a team Should be able to co-ordinate with supply chain and vendors Professional attitude towards work and self-motivated Be a team player and have multi-disciplinary co-ordination skills We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Mumbai, MH, IN Bengaluru, KA, IN Noida, UP, IN Contract Type: Permanent Work Pattern: Full Time Market: Water Discipline: Water Job Ref: 8333 Recruiter Contact: Miloni Mehta Show more Show less

Job Descripition Experienced in managing quality and accuracy of BIM information, ensuring they are in accordance with required standards and levels of detail Proficient in the use of Revit and Navisworks software Experience and good understanding of Structural, Mechanical and Electrical detailing using Revit including generation of 2D drawings and schedules from Revit. Should have knowledge of Pipe materials, Piping Systems and Pipe fittings. Experience in modelling of RCC and Structural Steel building elements, openings, stairs, platforms, trenches, chambers Should have knowledge of Cable trays, conduits, cable trenches and cable ducts. Modelling of roads, pavements Experienced in managing model set-up, families and worksets Producing 2D construction drawings, Details and Sections along with Schedules. Experienced in handling Point Cloud data shall be considered as an added advantage Knowledge of AutoCAD is a must. Reviewing modelling issues and Coordinate between all engineering disciplines to resolve issues and ensure delivery Candidate Specification : Diploma in Civil or Mechanical Engineering Water industry experience with UK specific experience would be preferred. Should be conversant with Autodesk Revit and AutoCAD Knowledge of Bentley ProjectWise or BIM 360 shall be considered as added advantage Good communication skills and the ability to work oneself and as part of a team Should be able to co-ordinate with supply chain and vendors Professional attitude towards work and self-motivated Be a team player and have multi-disciplinary co-ordination skills We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Mumbai, MH, IN Bengaluru, KA, IN Noida, UP, IN Contract Type: Permanent Work Pattern: Full Time Market: Water Discipline: Water Job Ref: 8333 Recruiter Contact: Miloni Mehta Show more Show less

Description Burns & McDonnell India (BMI) Power Division is looking for a well-rounded and driven Mechanical Engineer in the Mumbai Office. The Power Division focuses on power generating facilities which offer a wide range of design and project execution experiences. This position is responsible for the design and evaluation of various systems associated with coal and natural gas fired power generation facilities as well as associated support facilities. Candidate will perform work which involves both conventional engineering practices and complex situations, requiring innovation relative to work practices and procedures. Multi-disciplined power generation projects require engineers to work in a diverse project team environment and exhibit the ability to develop consensus in identifying the optimum solution to complex problems. These complex assignments require the application of advanced techniques, resulting in the development of new or improved processes, equipment and/or technological methods. Candidate will be responsible for detailed design through the development of contract specifications and contract administration. Position will require extensive interface with equipment suppliers/vendors, and with project managers, other engineering disciplines, modelers, designers, and detailers locally in the Mumbai office as well as remotely in various offices in the United States. Following Are Some Specific Duties & Responsibilities Coordinating project design assignments and design teams Coordinating across the disciplines Providing leadership, guidance, instruction, and mentorship to the team and less experienced staff members Functional coordination and reviews of detailed pipe routing for conformance with system design requirements including pipe support selection/placement Administer equipment contracts (change evaluation, coordinate schedules, coordinate technical issues) Close coordination with US team communicating project status and responsible for project quality, schedule, budget and cost Participation in model review and resolving clashes with other disciplines Constructabilty reviews, Coordination with site if required Regularly meeting and corresponding with clients or outside stake holders Participating in Internal/External project audits Ability to handle power projects independently and capable of closely working with US team Qualifications This positionrequires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignments. Must be capable of interpreting and developing solutions to complex problems. Qualifications include: Bachelor’s degree in Mechanical Engineering from accredited program Minimum 12-16 years of related experience with exposure to piping design, pump selection, rotating equipment and process design Candidate with exposure system design incl. piping & instrumentaion diagrams, hydraulic analysis, control valve, pump selection, rotating equipment and process design Experience in developing equipment specifications, technical bid evaluating, procuring, reviewing vendor drawings and factory acceptance testing of mechanical equipment. Software experience utilizing AFT Arrow, AFT Fathom, SmartPlant P&ID, SmartPlant Review, Navisworks is preferred. Aspen Hysys would be an added advantage. Familiar with power industry codes and standards including ASME B31.1, ASME Boiler and Pressure Vessel Code Sections I and Section VIII. Candidate with Field construction and commissioning experience will have added advantage. Proficient in the English language and must demonstrate excellent oral and written communication skills, as well as strong analytical and problem-solving skills. Previous consulting engineering experience preferred. Job Engineering Primary Location India-Maharashtra-Mumbai Schedule: Full-time Travel: No Req ID: 251583 Job Hire Type Experienced Not Applicable #BMI N/A Show more Show less

The digital delivery of MEP models and task information management of the MEP design from initiation to project close out Supporting the BIM manager in the delivery of digital outputs within project teams Required Candidate profile 5+ yrs exp in Softwares such as HAP, IES, Revit, Dialux, Amtech and BIM platform Preference for engineers with experience in residential and commercial projects in India (High Rise Building)

Job Description: Mechanical Engineer At Mott MacDonald, we are proud to be part of an ever-changing global industry, delivering transformative work that s defining our future. It s our people who power that performance. We re a collection of leading experts who combine our different expertise to stay ahead of the curve and move the industry forward. With so many opportunities to learn, grow and excel, the possibilities are as varied as every individual to shape the career that s right for you. Whether you want to pursue excellence in a specialism or broaden your experience with flexible roles across our business, you re connected to a community of global experts championing you to be your best. Key Responsibilities: Knowledge of Indian Standard Code / NFPA (National Fire Protection Association) Standard FM Global/NBC - related to firefighting system. Fire Hydrant System Layout/Spray & Sprinkler System Layout/Foam System Layout/Fire Water Pump House Piping layout. Hydraulic Calculation. Preparation of Data Sheet. Preparation of Tender Specification. Reviewing model in Navisworks Review & checking of Vendor drawings. Meeting with Client. Essential Candidate Requirements: BE/BTech Mechanical Engineering Experience in Consultancy Organisation. Experience in Chemical, Pharma, General Industry, Argo, FMCG projects. Knowledge in PIPNET software. Interpersonal skill / Teamwork Sound Communication skill Experience in 3D Model review in Navisworks As a proudly employee-owned business, we re here to benefit our clients, our communities and each other. Our shared success enables us to invest in creating a platform for everyone to feel safe and valued, empowered with the right tools and right support, in a place where fairness and integrity run deep. Whatever your ambition, Mott MacDonald is where everyone has the opportunity to be brilliant. We can offer (subject to Company s policy): - Agile and safe working environment - Competitive annual leave and sick leaves - Group incentive scheme - Group term life insurance, Workmen s compensation and Group medical insurance coverage - Short and Long-term Global employment opportunities - Global collaboration and knowledge sharing - Digital Innovation and Transformation

Experience- 7 to 15 yrs. in detail design of Electrical System related to Industrial Buildings Roles and Responsibilities 1. Knowledge of reading project plot plans and project design specifications. 2. Preparation of Electrical Design Specification. 3. Experience in preparing detailed Single line diagrams and Schematic diagrams of LV Panels (Lighting Panel, Power Panel, HVAC Panel (preferred)) 4. Preparation of Data Sheet of Electrical Equipment’s (Transformers, LV Panels, AC UPS, Lighting fixtures, Cables etc.) 5. Lighting Calculations using DIALux software. 6. Preparation and checking of Lighting and Convenience Socket Layouts. 7. Preparation and checking of Equipment Layout and Power & Control Cable Routing Layouts. 8. Preparation and checking of Earthing and Lightning Protection System Layouts. 9. Review of Vendor offers and documents related to Electrical Equipment’s i.e Transformers, LV Panels, AC UPS, Lighting fixtures, Cables etc. 10. Technical Bid Evaluations to finalize the Vendors. 11. Preparation of Bill of Material & Bill of Quantity, Current Estimation & Accounting. 12. Co-ordination with other disciplines, Client, Vendor, Site Team etc. 13. Maintain Document control index of working project and timely submission of documents and drawings as per project schedule. 14. Knowledge of Autocad, BIM 360 software, Revit, Model review, Navisworks for clash check will be an added advantage. 15. Knowledge of HVAC Electrical System will be an added advantage.

Experience- 7 to 15 yrs. in detail design of ELV System related to Industrial Building’s Roles and Responsibilities 1. Knowledge of reading project plot plans and project design specifications. 2. Preparation of F&G System, Telecom (Security/ICT/PAGA) system, HVAC Control system Design Specification. 3. Preparing Schematic and Block diagrams for F&G system, Telecom Systems. 4. Preparation of Data Sheet for F&G system, Telecom Systems, HVAC Instruments. 5. Preparation and checking of F&G and Telecom Equipment Layout and Cable Routing Layout, Cable Schedule, 6. Preparation of Instrument List, tagging of Instruments, cables, cable trays, etc. 7. Preparation of HVAC/ Instrument I/O list. 8. Preparation of Load List for the F&G system, Telecom Systems, HVAC Control Systems of Buildings. 9. Technical Bid Evaluations to finalize the Vendors. 10. Preparation of Bill of Material & Quantity., Current Estimations & Accounting. 11. Co-ordination with other disciplines, Client, Vendor, Site Team etc. 12. Maintain Document control index of working project and timely submission of documents and drawings as per project schedule. 13. Knowledge of Autocad, BIM 360 software, Revit, Model review, Navisworks for clash check will be an added advantage. 14. Knowledge of HVAC Instrumentation System will be an added advantage.