1) Manage and ensure accurate filing of Tax Deducted at Source (TDS) returns. 2) Prepare and oversee Goods and Services Tax (GST) returns, including GSTR-1, GSTR-3B, and GSTR-9. 3) Compile and maintain detailed stock statements for accurate inventory and financial insights. 4) File and review individual income tax returns, ensuring compliance with tax regulations and optimizing tax efficiency. 5) Prepare and analyze individual balance sheets to provide a clear financial snapshot. 6) Liaise with banks, handling communication and documentation for banking transactions and services. 7) Prepare detailed documentation and case files for income tax cases, ensuring accurate representation. 8) Perform miscellaneous tasks as needed to support departmental and organizational objectives. Education- Accounts, CA Inter, CS Freshers

1) To ensure the 5S & Safety in the respective area. 2) To assure the Quality during production as per Product Specification mentioned on drawing & SOP through first piece inspection & inprocess inspection. 3) To monitor the effectiveness of corrective & preventive actions for high rejection. 4) To implement the control on 4M change. 5) To handle the internal customer complaints & submit the CAPA accordingly. 6) To implement & maintain the documentation (Training Records, Quality reports) as per requirements of IAFT 16949:2016. 7) To ensure that process related documents like Work Instructions, Calibration plan of IMTE & Standard Operating Procedure (SOP) are properly displayed and adhered. 8) To give at least one suggestion in a month to optimize the use of consumables, electricity & raw material by doing VE (Value Engineering). 9) To stop production in case of any abnormality / non conformity & inform to H.O.D. (QA).

1. To ensure implementation & maintenance of quality system in the company. 2. To monitor insp. & testing activities at all levels i.e. at Incoming, In-process Q. A. & PDI / Final Inspection stages as per control plan. 3. To implement & maintain 5 S activities at each level. 4. To prepare trends in product quality parameters during Management Review Meeting. 5. To ensure calibration of all instruments & gauges used in the organization. 6. To ensure the control on 4M change 7. Corrective & preventive action on daily rejection/salvage & customer complaints. 8. Training of subordinates on quality improvement. 9. To analyze Measurement System. 10. To plan manpower & identify training needs of personal. 11. To interact customers regarding CTQ parameters during the development of new product along with NPD Team. 12. Responsible to maintain all update drawings of product and keeps inform to Production or any concerned departments. 13. To monitor & ensure Quality Performance Rating of all customers as per the defined KPI. 14. To approve in-house drawings during New Product Development or in case of any change in absence of VP not present. 15. To sign. Off 8D report after monitoring the effectiveness of action taken. 16. Review on customer returns and take necessary corrective actions. 17. To ensure the customer specific requirements are considered 18. To ensure the implementation of Change Management Software. 19. To ensure all above activities in all the Plants.

1. To ensure implementation & maintenance of quality system in the company. 2. To monitor insp. & testing activities at all levels i.e. at Incoming, In-process Q. A. & PDI / Final Inspection stages as per control plan. 3. To implement & maintain 5 S activities at each level. 4. To prepare trends in product quality parameters during Management Review Meeting. 5. To ensure calibration of all instruments & gauges used in the organization. 6. To ensure the control on 4M change 7. Corrective & preventive action on daily rejection/salvage & customer complaints. 8. Training of subordinates on quality improvement. 9. To analyze Measurement System. 10. To plan manpower & identify training needs of personal. 11. To interact customers regarding CTQ parameters during the development of new product along with NPD Team. 12. Responsible to maintain all update drawings of product and keeps inform to Production or any concerned departments. 13. To monitor & ensure Quality Performance Rating of all customers as per the defined KPI. 14. To approve in-house drawings during New Product Development or in case of any change in absence of VP not present. 15. To sign. Off 8D report after monitoring the effectiveness of action taken. 16. Review on customer returns and take necessary corrective actions. 17. To ensure the customer specific requirements are considered 18. To ensure the implementation of Change Management Software. 19. To ensure all above activities in all the Plants.

Key Responsibilities: Develop and implement effective marketing strategies to drive sales. Identify new business opportunities and build strong client relationships. Promote products through various offline and online channels. Achieve sales targets and contribute to overall business growth. Candidate Requirements: Minimum 1 year of proven experience in marketing. Excellent communication and interpersonal skills. Self-motivated, target-driven, and a team player. Willingness to relocate to Ludhiana. Only serious and committed candidates should apply.

1 To ensure the 5S & Safety in the respective area. 2 To update the Control Plan, PFMEA or any other relevant documents as per the action plan submitted for any customer complaint or customer audit. 3 To prepare the PPAP documents in case of any ECN implemented. 4 To get the NCRs closed properly, raised during the audits. 5 To carry out the documentation related to EMS ISO 14001 : 2015 6 To ensure that shop floor documents (work instructions, Quality Plan etc.) are properly displayed & adhered. 7 To establish the required documentation of Quality system as per Standard IATF 16949:2016. 8 To give at least one suggestion in a month to optimize the use of consumables, electricity & raw material by doing VE (Value Engineering). 9 You are advised to present the Monthly Performance Report to the management on the basis of above mentioned points. Skills : - Internal Audit/ External Audit/IATF16949:2015/ ISO 14001:2015

a) To ensure the 5S & Safety in the respective area. b) To update the Control Plan, PFMEA or any other relevant documents as per the action plan submitted for any customer complaint or customer audit. c) To prepare the PPAP documents in case of any ECN implemented. d) To get the NCRs closed properly, raised during the audits. e) To carry out the documentation related to EMS ISO 14001 : 2015 f) To ensure that shop floor documents (Work instructions, Quality Plan etc.) are properly displayed & adhered. g) To establish the required documentation of Quality system as per Standard IATF 16949:2016. h) To give at least one suggestion in a month to optimize the use of consumables, electricity & raw material by doing VE (Value Engineering). i) You are advised to present the Monthly Performance Report to the management on the basis of above mentioned points.

1) To ensure the 5S & Safety in the Maintenance section & shop floor. 2) To maintain the minimum stock level of critical spares of machines as per Master List of Critical Spare. 3) To provide training to all concerned regarding the importance of cleaning, oiling & tightening (COT) of machines. 4) To take & implement corrective & preventive actions on major / repeated breakdowns to reduce the breakdown hrs. / MTTR & MTBF. 5) To ensure the preventive maintenance of machines as per preventive maintenance schedule. 6) To ensure the safety of the machine & personal by following the safety norms i.e. no loosing wire, proper covering of moving parts of machine, proper light arrangement on work places etc.. 7) To carry out the predictive maintenance of machines to eliminate the possible causes of machine breakdown through machine maintenance check sheet.. 8) To implement & maintain the documentation as per requirements of IATF 16949:2016. 9) To update the H.O.D. for the need of periodic over hauling of machines when required. 10) To ensure the preventive maintenance of the Fire Alarm / Hooters & Hydrant systems and update the record

Greet and welcome visitors in a professional manner. Answer and direct phone calls to the appropriate departments. Manage and distribute incoming and outgoing mail and packages. Schedule and coordinate appointments and meetings. Maintain the reception area to ensure it is tidy and presentable. Assist with administrative tasks such as filing, data entry, and office supply management. Support the team with other office-related tasks as needed. Communication Skills, Presentation Skills

1 Knowledge of APQP process in case of New Product Development. 2 Should have a good understanding of Hot Forging Process, Machining Processes and Fabrication (Pressing and Welding). 3 Good co-ordinate skills with all concerned process owner for the on time submission of samples as per defined target date. 4 Good Communication skills to communicate with the customers regarding any issue raised during development stage. 5 Knowledge of PPAP documents in case of New Product Development & in case of ECN received in the existing parts. 6 Knowledge of Project handover/sign off from NPD to production. 7 Implementation of Poka- Yoke for special characteristics during New Product Development. 8 Knowledge to implement & maintain the documentation as per requirements of IATF 16949:2016. 9 To maintain the enquiry register. 10 Knowledge regarding ECN/ PCN process in case of change in product parameter or process change.

a) To get daily production targets for all manufacturing & assembly lines from Production Shift in-charge. b) Daily monitor the status & availability of manpower, Tools, inserts, jigs, fixtures & other consumables to carry out the production c) Daily arrange the production lines for manufacturing with required & defined resources (manpower, materials, tools, & consumables) within the 10min of shift start. d) To ensure the daily maintenance of machines are carried out. e) To engage qualified / skilled operators on all critical process. f) To monitor the production output on hourly & daily basis. g) To implement the control on 4M change. h) To assist operators in setting adjustments during change of tools and job setups. i) To ensure the operators are changing the tools & inserts as per their standard life. j) To ensure the PED engineers are carried out fixture calibration / audits as per the schedule. k) To monitor all the Poka Yokes working conditions in the line. l) Co-ordination with stores-in charge and other line supervisors for receiving of materials from stores and other lines respectively. m) To train the new & existing operators on respective process & products to improve his / her skill competency. n) To monitor the OEE for bottle neck / critical machines of the manufacturing & assembly lines. o) Analysis of Nonconforming process & products and to take corrective actions for the same. p) Analysis of production loss & to take corrective actions for the same. q) To inform Production Shift in-charge and DH-Production about nonconformities in shifts. r) Communicate all the daily production related activities to shift reliever through Log Book. s) To maintain & implement 5S in their department. t) To raise the Breakdown intimation slip when there is breakdown of machine. u) To change the Job setups from one machine to another machine if the machine is producing nonconforming parts / breakdown after getting approval from dept. Head Strong problem-solving and troubleshooting skills are needed to identify and resolve issues during shift Hours.

1) Strong understanding of CNC machining principles, including cutting tools, machine operations, and programming languages (e.g., G-code) 2) Meticulous attention to detail to ensure accuracy and precision in CNC program setting 3) Strong problem-solving and troubleshooting skills for identifying and resolving setup or operation issues 4) Prior experience in CNC machining, either as an operator, setter, or in a related role 5) Basic mathematical skills for calculating dimensions, tolerances, and machine settings

1. To monitor Quality Performance Rating, customer end line Rejection, lot Rejection, QDH and customer returns on daily basis. 2. To intimate the concerned through Quality alerts in case of any customer complaint. 3. To do the root cause analysis with the concerned team members for any customer complaint. 4. To submit the containment action/M2 action and corrective action to customer for any customer complaint 5. To ensure calibration of all instruments & gauges used in the organization. 6. Training of subordinates on quality improvement. 7. To plan manpower & identify training needs of personal. 8. To ensure the Layout inspection & Poison Cake Test as per plan and Dock Inspection of parts. 9. To prepare the data for Cost of Poor Quality. 10. To maintain the internal and External IPP Tags. 11. To implement & maintain 5 S activities at each level. 12. To ensure the customer specific requirements are considered.

a) To ensure the 5S & Safety in the Maintenance section & shop floor. b) To maintain the minimum stock level of critical spares of machines as per Master List of Critical Spare. c) To provide training to all concerned regarding the importance of cleaning, Lubrication, Inspection, oiling & tightening (CLIOT) of machines. d) To take & implement corrective & preventive actions on major / repeated breakdowns to reduce the breakdown hrs. / MTTR & MTBF. e) To ensure the preventive maintenance of machines as per preventive maintenance schedule. f) To ensure the safety of the machine & personal by following the safety norms i.e. no loosing wire, proper covering of moving parts of machine, proper light arrangement on work places etc.. g) To carry out the predictive maintenance of machines to eliminate the possible causes of machine breakdown through machine maintenance check sheet.. h) To implement & maintain the documentation as per requirements of IATF 16949:2016. i) To give at least one suggestion in a month to optimize the use of consumables, electricity & raw material by doing VE (Value Engineering). j) To update the H.O.D. for the need of periodic over hauling of machines when required.