Purpose of the Role Acting as a Safety Officer and to assist line Management for implementation of Safety Management system. Regular monitoring and reporting of the MIS related to safety . To fullfill the legal requirement as per W,B Factories rule 1958 and Safety officer rule 1978 under Factories Act 1948 Roles & Responsibilities Implements safety related systems and practices at the Plant in alignment with Plant Head and department head and with Fire Services; Involves in investigating major incidents. Understands incident and assesses consequences to coordinate remedial actions in alignment with the HoD and Plant Head. Ensures safety related compliances and conformances of the Plant, e.g., under Factory Rules, OSHAS, IS 14489 and those related with Electrical Safety, Lifts, storage of Petroleum products, Chlorine license etc. Liaises with concerned bodies for the same. Ensures regular communication on safety through various channels, to all employees and contractors - posters, documents (e.g., JSA), videos, speeches (e.g., Tool box talk), and caution notices. Ensures proper labeling of safety equipment. Holds safety meetings with contractors as per schedule to reinforce messages on safety. Ensures all safety and fire prevention systems and equipment are available - raises defects promptly in case of noticed abnormalities Monitor of unsafe practices and Provides feedback to contractors periodically, for their improvement. Focuses on field observations to ensure compliance with safety standards. Approves, in consultation with peers in relevant functions, contractor penalties. Proposes safety systems - equipment and processes - to reduce hazard in specific areas Ensures the risk-prone daily jobs are studied by the team to reduce their risks Invites, initiates and facilitates audits, meetings and studies to help identify improvement opportunities Key Competencies Conversant with the safety system and activities in large industry. Excellent coordination and communication skills for implementation and monitoring of safety procedures. Lead the safety promotional activities, trainings and meetings with various group of people.

Purpose Unloading of coal at railway siding and evacuation of the same from siding to plant Roles & Responsibility Smooth Movement of coal from Railway siding Minimization of transit loss Unloading of coal within the prescribed time allowed by Railway Oversee Coal Quality/ Sample preparation / lab testing Effective labour management Some key attributes desired of this role Liaisioning Skill Can speak local language Labour management Preparing MIS

Purpose of the Role Candidate should have leadership quality with positive attitude to lead the team at job. Self-motivated, decision making quality will be added advantage. Candidate must have good analytical approach & inbuilt problem solving capacity during professional challenges and must have experience in working with more than 100MW power plant. What does this role entail For BTG- Electrical maintenance: Candidate must have well exposure of 150X2 MW Units , TG BRUSHLESS EXCITATION SYSTEM & its AUXILLIARIE, AVR,PMG, MAIN EXCITER,GMP/GCP, NGR and LAVT PANNEL) of BHEL Make Generator & its protection system. Exposure required for integration of main plant Protection system with SCADA AUTOMATION (O&M), Network management, through LAN/OFC network establishment concerned with 220kv SAS. Exposure in DVAR (BHEL) & its integration with DCS. Exposure required for standard; IEC 61850,101 Protocol, 104 protocol, IEC 60870-5-101, IEC 60870-5-104, RS232, RS485,Modbus protocol testing & commissioning etc. Exposure required in ABBs Relay & its configuration & testing REM610/611/615 /RET650 & REG670 RTU, BCUs, Server O&M etc. Exposure required SAP maintenance module, CMT, Meter data communication. Exposure required in ABT system, smart metering, EMS system. Exposure required in TG & 220kv Grid synchronization system. Exposure required for troubleshooting for AC Drives (SIEMENS, ABB ACS 550 ABB ACS 880) Exposure in Testing & trouble shooting related control ckt for Generator & Power Transformer GT/ST/UT & HT/LT Switchgears relates issues. Trouble shooting of electrical ckt CRP & GRP. Exposure of LT&HT Motor & Switchgear maintenance (ABB/Schneider/L&T). Experience in Preventive, Corrective and Breakdown Maintenance, with compliance of plant EHS regulation & PTW system for all vital electrical equipments i.e Power Transformers, Generator and Motors & Motor Feeders are inevitable. Some key attributes desired of this role Good knowledge in excel Strong interpersonal and communication skills Ability to work in a dynamic environment and lead a team Acceptance of critical challenges.

Purpose of the Role Candidate must have electrical maintenance exposure of thermal power plant not less than 100 MW with good analytical approach & inbuilt problem solving capacity during professional challenges from core power plant maintenance team. What does this role entail For BOP area: Exposure in Switchyard SCADA & AUTOMATION, its Network management, LAN/OFC network, BCU, Server establishment operational exposure for 220kv SAS or above voltage level Exposure of CWP/CTF electrical system i.e. 6.6kv HT Breaker (ABB/Schneider)/LT breakers (L&T, BCH etc.) with inbuilt digital relays configuration & protection settings. Exposure in ABB/Siemens Relay well versed about relay coordination & its setting/ logic etc. Exposure (O&M) in SAP, M Cube, CMT, Meter data communication. Exposure WTP Elect System, smart metering, EMS system. Exposure of Raw material handling system (CHP) & its accessories like stacker reclaimer/Belt conveyers/Weighbridge electrical system etc. Exposure in Elect maintenance for AHP system i.e. 6.6kv & 0.415v Breaker/Switch gear/Motors & its accessories i.e. Dry ash Air compressor/wet ash conveying system etc. Exposure of troubleshooting for AC Drives/Control system (SIEMENS, L&T, ABB ACS 550 and ABB ACS 880). Exposure in O&M of Power Transformer, Isolators/ES, SF6 Breaker / CT/ PT at 220kv switchyard. Trouble shooting of electrical control ckt, preparation of RCA, & Modification of HT/LT/RP Panels on need based. Exposure of Protection relays for LT&HT Motor feeders & 220kv switchyard protection system are must. Experience in CHP system Preventive, Corrective and Breakdown Maintenance of Service Transformers, HT/LT Panels and Motors & Motor Feeders, DC systems are inevitable. Some key attributes desired of this role Good knowledge in excel Strong interpersonal and communication skills Ability to work in a dynamic environment and lead a team. Ability to perform in critical situations. Challenging acceptance attitude & cohesiveness among team