About the position: The Reliability Engineer position in Chevron s ENGINE Center provides reliability expertise to Chevron s operational refineries and Liquified Natural Gas (LNG) facilities. This role works collaboratively across multiple disciplines including Engineering, Operations, Maintenance and Reliability. The focus of this role is to provide reliability and integrity program support to improve asset performance and operational availability through teamwork, analytical tools, and Facilities Integrity and Reliability Management (FIRM) work processes. Key responsibilities: Steward the Operational Excellence (OE) programs that make up the Facilities Integrity and Reliability Management (FIRM) Process Provide reliability integrity support to operations within Chevron complex process facilities Provide technical and facilitation support to Asset Operating Area Unit Reliability Briefs focused on identifying and developing solutions for reliability threats and poor performing equipment Maintain, develop, and report key reliability priorities to operations using the Reliability Integrity Prioritization Tool Provide analytical support for reliability and integrity programs across Chevron assets Support the facilitation and completion of Chevron Reliability Studies, capital projects and fixed equipment integrity initiatives Ensure compliance with applicable industry codes and standards as well as applicable Chevron standards, instructions, and guidelines Facilitate the application and use of reliability tools and work processes to identify gaps, prioritize opportunities, and develop recommendations to improve asset performance and operational availability Support the investigation and troubleshooting of equipment failures through root cause analysis Leverage historical operation, reliability, and maintenance data for use in analytical tools and studies to improve asset performance Participates in cross functional teams across Chevron complex process facilities to support standardization of reliability tools and processes as needed Perform reliability analysis using statistical software to help determine probability of failure, prioritize maintenance work, justify spare parts stocking decisions, or develop options for selection of project alternatives Required Qualifications: Bachelor s degree in mechanical, chemical or materials engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) university Minimum 3 - 10 years of cross-functional experience in a refinery or complex process facility Demonstrated technical experience in this discipline will be highly regarded Reliability Engineering or Asset integrity experience in a complex process facility is preferred Knowledge of refinery and LNG process technologies will be highly regarded is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

About the position: The Turnaround Scheduler is a team member within the Maintenance and Turnaround organization within the Chevron ENGINE Center. The role provides turnaround and maintenance scheduling support to Chevrons Refining and Liquified Natural Gas (LNG) assets. This role will support the development of turnaround work packages and associated work scope estimates with appropriate activity detail, activity duration, and resource requirements across the Chevron Refineries and Liquified Natural Gas (LNG) facilities. This role is responsible for engaging with key stakeholders to develop optimized and resource loaded/levelled schedules, leads schedule optimization efforts and develops Integrated event schedules for all Pre- and Post-turnaround work and applicable Capital Project work scopes. Key responsibilities: The Turnaround Scheduler will support primavera P6 reporting, including daily craft look-ahead and work scope prioritization, resource contractor profiles and manpower loading, S-curve and overall direct labor productivity analysis, and progress reporting to Turnaround leadership Develop fully integrated turnaround and project schedules across several operating assets Integrate with turnaround core teams to support scheduling accuracy with Chevron and contractor resources Responsible for working within P6 scheduling tools, maintenance record systems such as Maximo and JDE, and Salesforce Turnaround systems to support turnaround and maintenance scheduling deliverables Review contractor resource estimates to ensure adherence to resource loading requirements, terms and conditions Coordinates with operating facilities and contractors as necessary to ensure turnaround schedule alignment, analyze schedule data, ensure turnaround shutdown, clean-up, start-up (SCS) procedures are effectively sequenced and resource loaded, and provide regular updates to stakeholders Develop working knowledge of Chevron s Turnaround process (IMPACT) to support all phases of the Turnaround Maintenance process Validate turnaround scope is complete and assist scope inputter prior to appropriate phase of the Chevron Turnaround Process Ensure plans are detailed appropriately in Primavera (P6) scheduling software Develop Plot Plans and scope plotting density. Assist Turnaround Maintenance Team Lead on all deliverables for Peer Reviews Support planning of all scope change as approved including estimating, material ordering, and level of work instructions Document all lessons learned from all Phases of turnaround planning. Adopt digital tools as rolled out for use and provide feedback to product owners Required Qualifications: 2 years of relevant turnaround experience within complex process facilities Demonstrated relative experience in performing scheduling activities for a complex process facilities or operating assets in Maintenance turnaround events Degree in in relevant Engineering or Maintenance Discipline 5 years relevant turnaround execution and scheduling experience providing technical and turnaround scheduling support to plant turnaround teams in a complex oil and gas operating environment, preferred Familiarity in supporting Operations or Maintenance within the Refining or LNG industry is preferred Working knowledge of Primavera P6 project schedule management software, SAP, SMART GEP, and Maximo/JDE CMMS and their interfaces with the scheduling programs is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

About the position: The Materials Corrosion Engineer is a part of Materials Corrosion team within the Materials Equipment Quality (MEQ) chapter at the Chevron ENGINE and is responsible for providing metallurgy, corrosion, failure analysis, welding, coatings, non-metallics and cathodic protection consulting services to Chevron Upstream and Midstream Business Units and Capital Projects, to ensure reliability and integrity of piping, equipment, structures, and pipelines. Key responsibilities: Work collaboratively with SMEs at CTC and within the ENGINE to develop and deploy materials, corrosion, coatings and welding solutions. Make fit-for-purpose materials selections for new and replacement piping and equipment. Predict corrosion rates in upstream production environments using corrosion modeling tools. Review and analyze corrosion monitoring and inhibition data to optimize corrosion control program. Review welding procedures and support qualification of welding procedures. Troubleshoot welding fabrication issues. Make coating systems selections and review coatings application procedures. Review cathodic protection (CP) designs for onshore and subsea pipelines. Support metallurgical failure analysis of piping and equipment. Provide technical input to support damage mechanism identification, corrosion assessments, inspection plans. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, or related engineering discipline from a recognized (AICTE) University. Skilled competency level in upstream oilfield metallurgy and corrosion. Skilled competency level in welding, coatings, cathodic protection and non-metallics Fundamental knowledge of relevant technical codes and standards (NACE MR0175, API 571, ASME B31.3, B31.4, B31.8, ASME BPV Sec VIII, ASME Sec IX, ASME PCC-2) Fundamental competency level in fixed equipment (piping, equipment, pipelines, heat exchangers, tanks) integrity management. Preferred Qualifications: 10+ years corrosion and materials engineering experience, with 7+ years in the upstream oil and gas industry. Master s degree in Corrosion, Metallurgy or Materials Engineering Hands-on, field experience at an upstream operating facility NACE Specialist/Technologist certification in materials selection, corrosion control, cathodic protection or pipeline integrity management. Professional Engineering registration Experience with data analytics and digital tools Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

About the position: The Machinery Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and provides remote monitoring, diagnostics, and development of new solutions for critical rotating equipment across Chevron operating assets. Monitoring activities include the review of predictive analytics alerts and reviews vibration trends, providing insights to business unit customers through weekly or bi-weekly reporting and meetings. Key responsibilities: Performs remote support through exception-based monitoring of critical rotating and reciprocating machinery across Business Units and business segments, as an extended member of the Machinery and Power Support Center. Supports expansion of predictive analytics and other advanced analysis tools for machinery performance evaluation and early warning detection. Engages with Business Units on equipment troubleshooting and identification of long-term trend deviation and equipment degradation. Utilizes online condition monitoring programs to support asset health evaluations. Supports data collection and reporting for benchmarking of critical rotating equipment reliability and efficiency metrics. Supports data gathering for advanced machinery issues and collaboration with Subject Matter Experts. Scales and develops analytics for machinery performance analysis and mechanical condition monitoring utilizing a combination of 3rd party and Chevron-developed solutions Supports data gathering for equipment benchmarking Teams with BU customers and Technical Center experts to diagnose complex issues Required Qualifications: Bachelor of Science in Mechanical Engineering from a recognized (AICTE) university Extensive experience in rotating equipment operation, maintenance, system optimization and machinery condition monitoring analysis Preferred Qualifications: 10+ years experience as a machinery engineer or analyst in an Oil and Gas operating facility Skilled use of SmartSignal predictive analytics software Vibration analysis certification Aveva PI time series data analysis Prior experience working in Oil and Gas Processing facility Prior experience using OSI Plant Information and SEEQ is a plus. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Materials Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing materials corrosion engineering research and development services to Chevron operating companies, affiliates capital projects worldwide, to deploy innovative and fit-for-purpose materials, corrosion, coatings related solutions. Key responsibilities: Support development of RD project proposals and gain alignment with Business Unit s. Track and report RD project status, milestones, and spend. Analyze trends of equipment condition, reliability, and failure data to identify RD opportunities Support Enterprise 3D-printing effort. Predict corrosion rates in upstream and downstream process environments using corrosion modeling and simulation tools. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, Material Science, Chemistry, or related engineering/scientific discipline from a recognized (AICTE) University. Skilled competency level in Demonstrated experience with data analysis, physical metallurgy, electrochemistry, and/or damage mechanisms. Fundamental competency level Background in fixed equipment (piping, equipment, pipelines, heat exchangers, tanks) integrity management. Fundamental competency level in Prior project management experience across the entire RD cycle, from ideation to deployment. Preferred Qualifications: 10+ years of industrial post-graduate engineering experience, with 7+ years in an RD role. Masters degree in Corrosion, Metallurgy, Materials Engineering, Material Science, and/or Chemistry from a recognized (AICTE) University. Hands-on, field experience at an oil gas operating facility Professional Engineering registration Experience with data analytics and digital tools Project management certifications Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Materials Corrosion Engineer is a part of Materials Corrosion team within the Materials Equipment Quality (MEQ) chapter at the Chevron ENGINE and is responsible for providing metallurgy, corrosion, failure analysis, welding, coatings, non-metallics and cathodic protection consulting services to Chevron Upstream and Midstream Business Units and Capital Projects, to ensure reliability and integrity of piping, equipment, structures, and pipelines. Key responsibilities: Work collaboratively with SMEs at CTC and within the ENGINE to develop and deploy materials, corrosion, coatings and welding solutions. Make fit-for-purpose materials selections for new and replacement piping and equipment. Predict corrosion rates in upstream production environments using corrosion modeling tools. Review and analyze corrosion monitoring and inhibition data to optimize corrosion control program. Review welding procedures and support qualification of welding procedures. Troubleshoot welding fabrication issues. Make coating systems selections and review coatings application procedures. Review cathodic protection (CP) designs for onshore and subsea pipelines. Support metallurgical failure analysis of piping and equipment. Provide technical input to support damage mechanism identification, corrosion assessments, inspection plans. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, or related engineering discipline from a recognized (AICTE) University. Skilled competency level in upstream oilfield metallurgy and corrosion. Skilled competency level in welding, coatings, cathodic protection and non-metallics Fundamental knowledge of relevant technical codes and standards (NACE MR0175, API 571, ASME B31.3, B31.4, B31.8, ASME BPV Sec VIII, ASME Sec IX, ASME PCC-2) Fundamental competency level in fixed equipment (piping, equipment, pipelines, heat exchangers, tanks) integrity management. Preferred Qualifications: 10+ years corrosion and materials engineering experience, with 7+ years in the upstream oil and gas industry. Master s degree in Corrosion, Metallurgy or Materials Engineering Hands-on, field experience at an upstream operating facility NACE Specialist/Technologist certification in materials selection, corrosion control, cathodic protection or pipeline integrity management. Professional Engineering registration Experience with data analytics and digital tools Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Civil/Structural/Marine Engineer (CSME) Lead is part of the Facilities Designs Engineering team and supervises a team of CSME Engineers within the Chevron ENGINE Center. This role s primary purpose is to provide leadership to a team responsible for providing civil/structural designs support to Chevrons Refining and Liquified Natural Gas (LNG) assets including operations and projects. The CSME Team will support cross functional teams engaging with Operations, Maintenance and other engineering functions across Chevron. Key Responsibilities: Supervise, coach, mentor, and develop CSME Design Engineers providing leadership and guidance on standard tools and processes Sets clear expectations and supports creation and management of individuals performance and development plans Partner with customers and stakeholders to prioritize the team s workload. Ensure the team is appropriately resourced to meet the customers needs and business plan commitments Leverage expertise and knowledge of CSME systems to Design, implements, and optimizes oil and gas equipment in new and modified facilities Ensure that civil/structural designs for onshore/offshore facilities, including marine facilities, meet specifications and applicable Codes/Standards\Provide design engineering support for Asset Brownfield Engineering related Projects, as well as providing input and conducting design studies in Opportunity Development Development and approval of a wide variety of discipline deliverables Development and checking of calculations / analyses. Support functional review of Management of Change (MOCs) requests Development of/input to Request for Proposal/Request for Quotation and review of technical bid packages Work closely with the Lead discipline engineer and interface with other disciplines to ensure design quality and successful outcomes, including interfacing with discipline Subject Matter Experts and/or Technical Authorities to address complex issues or specification compliance queries Promote a continual improvement mindset while removing barriers and seeking simple, fit-for-purpose solutions. Ensures lessons learned are shared and incorporated into the applicable systems for sustainability Provide leadership in sharing information and resources across the business units Leads projects of large scope and complexity under minimal supervision Support department recruiting and hiring efforts Develop and apply CSME engineering and design principles to deliver high quality and predictable designs on projects Required Qualifications: Engineering degree in Civil or Structural engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) an appropriate certified university 5-10 years relevant experience providing technical civil/structural/marine engineering support Preferred Qualifications: 10+ years of experience in an operational support role or similar for a complex refinery or LNG facility (preferred) Demonstrated supervisory experience will be highly regarded Experience with Concept, Front End, Detailed engineering and design requirements within an Operational environment Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Senior Robotics Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and will be part of Chevron s broader Robotics program. The vision of this program is to enable adoption of robotics technology to drive business results. This role will lead the stakeholder engagements across multiple business units to expand the Robotics community of practice (CoP), plan and deliver the goals/objectives aligned with overall robotics adoption vision program objectives. This role is also expected to participate in regional Joint Industry Projects (JIP), develop and execute collaborative work scopes with robotics companies and service providers in the region and represent Chevron in robotics consortiums and conferences in the region. Key responsibilities: Engage Align with Robotics program team members, plan and deliver the goals/objectives aligned with overall robotics adoption vision program objectives. Understand priorities and business value to drive standardization, integration of technology within current workflows and digitization to enable end-user acceptance of these technologies. capture feedback, best practices, share with the community and drive consistency. Engage stakeholders and practitioners across multiple BU s to understand barriers and challenges to adoption of robotics technology. Track progress and share reports with cross functional stakeholder and leadership Identify opportunities to collaborate with regional robotics companies and service providers with robotics capabilities to drive Chevron priorities in the region. Identity and develop testing, lab, research and development capabilities in the region that are aligned with overall robotics program objectives and goals. Mentor Robotics engineer team members on end users activities and requirements, for example, Inspection codes, standards, daily maintenance and operations etc. Develop org capability across chevron locations (BU, facilities) to enable adoption of these technologies and life cycle management of these tools (hardware and software). Identify skills, competencies required and lead training and development of workforce. Responsible to lead regional JIPs, sharing Chevron s needs and requirements to drive technology development. Create an environment for a discipline and structured approach to removing barriers and challenges to adoption of robotics technologies. Required Qualifications: Engineering degree in one of the following - Chemical, Mechanical, Electrical Electronics, Mechatronics (B.E./B.Tech.) from a recognized (AICTE) university Experience with development and implementation of robotic technologies in processing facilities Experience leading testing and qualification efforts of new technologies. Develop testing protocols, plan execute demonstrations Preferred Qualifications: Advanced degree in robotics or mechatronics API certifications for Tanks and/or Pressure vessels (510, 570, 653) 10+ years in Refinery or Complex upstream Facility Maintenance/Operations experience equivalent, 3+ years of experience leading and influence program level strategic planning Leading small teams Industry Certification in NDT - Level III in one or more NDE methods Managing cost, schedule and execution on Capital projects Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Upstream Process Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and is responsible for providing process engineering support to upstream oil and gas facilities. This role will support the design of systems from early concept through detailed engineering, perform troubleshooting and optimizations for Operations, evaluates new technologies, and helps developing and implementing digital tools for process engineering and water management. The work often impacts multiple BUs, regions and Asset Classes. The areas of support include oil, gas, and water. Key responsibilities: Provide timely technical service consultation to onshore and offshore oil and gas upstream facilities and capital project teams supporting new asset development and/or operational issues in existing projects and assets. Review and improve designs for operability, reliability, and ease of maintenance Support early phase project design execution by developing process documents such as heat and material balances and process datasheets Develop and maintain detailed process simulation models to evaluate design and operating scenarios (Hysys, ProII, etc.) Support day-to-day operations by providing engineering analysis and process troubleshooting of equipment items utilizing data analytics and process monitoring tools (PI, Seeq, etc.) Participate in on-the-job training/development opportunities through mentoring with Houston s technical center counterparts Required Qualifications: Experience with upstream technologies: gas dehydration, vapor recovery, natural gas sweetening, Offshore Topsides/Onshore Facilities gas/oil/water separation, solid removal, and produced water treatment. Bachelor s degree (B.E./B. Tech) in chemical engineering or related field from a recognized (AICTE) university Strong written and verbal communication skills to interact with Chevron s global employee workforce Preferred Qualifications: 5-10+ years of process engineering experience in upstream onshore and offshore process facilities. Possibly through operation support engineering assignments or process design work for capital projects. Experience in performing analytical calculations such as mass transfer, fluid flow, heat transfer, fluid dynamics, process control, kinetics and equipment sizing. Experience in working with process monitoring tools and process modeling software, such as PI, Seeq, Hysys, PROII, etc. Awareness of Process Safety Management concepts and principles such as Process Hazards Analysis, Alarm Objective Analysis, Integrity Operating Windows, etc. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Materials Corrosion Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing metallurgy, corrosion, failure analysis, welding, coatings, non-metallics and cathodic protection consulting services to Chevron Downstream Business Units and Capital Projects, including joint venture refineries and Chevron Lummus Global (CLG)., This role helps to ensure reliability and integrity of piping, equipment, structures, and pipelines across Chevron assets. Key responsibilities: Work collaboratively with SMEs at CTC and within the ENGINE to develop and deploy materials, corrosion, coatings and welding solutions. Make fit-for-purpose materials selections for new and replacement piping and equipment. Predict corrosion rates in upstream production environments using corrosion modeling tools. Review and analyze corrosion monitoring and inhibition data to optimize corrosion control program. Review welding procedures and support qualification of welding procedures. Troubleshoot welding fabrication issues. Make coating systems selections and review coatings application procedures. Support metallurgical failure analysis of piping and equipment. Provide technical input to support damage mechanism identification, corrosion assessments, inspection plans. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, or related engineering discipline from a recognized (AICTE) university. Skilled competency level in downstream metallurgy and corrosion, including high temperature damage mechanisms. Skilled competency level in welding, coatings and non-metallics Fundamental knowledge of relevant technical codes and standards (NACE MR0103, API 571, ASME B31.3, B31.4, B31.8, ASME BPV Sec VIII, ASME Sec IX, ASME PCC-2) Fundamental competency level in fixed equipment (piping, equipment, pipelines, heat exchangers, tanks) integrity management. Preferred Qualifications: 10+ years corrosion and materials engineering experience, with 7+ years in the downstream oil and gas industry. Masters degree in Corrosion, Metallurgy or Materials Engineering Hands-on, field experience at a downstream operating facility NACE Specialist/Technologist certification in materials selection or corrosion control. Professional Engineering registration Experience with data analytics and digital tools Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Condition Monitoring Engineer is a team member of the Rotating Equipment Condition Monitoring Engineering team within the Chevron ENGINE Reliability and Integrity group which supports Chevrons Refineries and Liquified Natural Gas (LNG) Assets. This role is responsible for performing condition monitoring activities of both fixed and rotating equipment across large complex process facilities in support of safe and reliable operations. Key responsibilities: Ensures the work practices, applications, data, and tools are effective and efficient to meet Chevron and industry requirements. These include machinery performance monitoring, troubleshooting, routine and turnaround machinery work scope development, and Engineering Work Order development Monitors and reports on KPIs to steward the effectiveness of equipment, work processes, data, and tools Works collaboratively with cross-functional teams (Operations, Technical, Routine Maintenance, Turnaround, Projects, Construction Services Group, etc.) to improve asset reliability Ensures lessons learned are shared and incorporated into the applicable systems for sustainability Supports troubleshooting of the equipment to improve reliability Execute and deliver workflows covering Equipment Monitoring and Condition Monitoring of critical equipment, such as: 1. Equipment Condition Monitoring and Reporting2. Review of and decisions from Condition Monitoring Results3. Reliability Performance Monitoring and Reporting4. Maintenance Strategy Optimization5. Support IMPACT (IMPACT is Chevrons Turnaround Process) Phase 1 through opportunity identification and studies6. Threats and Deficiency Processes7. Business Unit Deviation Management Process Required Qualifications: Minimum of 5-10 years relevant experience providing machinery engineering and condition monitoring support in a complex oil and gas operating environment Must have an engineering degree in Machinery, Reliability, or a related field, from an appropriate certified university Mechanical Engineering Degree (B.E./B.Tech.) in Reliability Engineering Post Grad qualifications in Reliability Eng, Condition Monitoring, RCM, (Reliability, Availability, and Maintainability Analysis) RAM and Maintenance Strategy development is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Process Control Engineer is part of the Process Engineering Automation team in the Chevron ENGINE Center and provides technical consultation and research consultation for Chevron in facility alarm management including applying standard solutions and techniques for alarm management and alarm rationalization across Chevron. The role will work in close collaboration with a team of Alarm Management Subject Matter Experts in the Chevron Technical Center (CTC). Key responsibilities: Apply Chevron Engineering Standards (CES) and industry standards related to Alarm Management Complete the Alarm Philosophy documentation for a project or Business Unit Compile and prepare data for an Alarm Objective Analysis (AOA) Analyze and provide technical comments on alarm management engineering design documents to ensure compliance with Chevron Engineering Standards (CES) and industry standards Execute the Process Control System (PCS) programming and configuration related to alarm management Effectively use alarm lifecycle management software to update and evaluate relevant Key Performance Indicators (KPIs) and provide recommendations Maintain and use alarm metrics and reporting applications and support operations in the troubleshooting and resolution of alarm management issues Track and catalog bad actors and develop an action plan to address and mitigate nuisance alarms to increase operational reliability Participate in on-the-job training/development opportunities through mentoring with Chevron Technical Center technical center counterparts Required Qualifications: Bachelor s degree (B.E./B. Tech) in chemical or electrical or instrumentation discipline engineering from a recognized (AICTE) university Strong written and verbal communication skills to interact with Chevron s global employee workforce Preferred Qualifications: 5+ years in an alarm management engineer or process control engineer role with a major petrochemical or oil and gas industry or major engineering and design consultant (EPC) or control system (examples, Honeywell, Yokogawa, Emerson) service provider. Experience with alarm lifecycle management activities such as alarm philosophy, alarm rationalization, setting up and monitoring of alarm key performance indicators and alarm reports, supporting operations with the alarm optimization, implementation of advanced alarm suppression techniques etc. Experience with common alarm lifecycle management application solutions such as Hexagon PSI (preferred), Honeywell Dynamo, Yokogawa CAMS. Familiar with analyses, data extraction and configuration of at least one of the common Chevron control systems that includes Yokogawa Centum VP, Honeywell Experion, Emerson DeltaV. Experience in Process Control or Control Systems Engineering. Diverse facility experience in all business segments. Knowledge of industry technology advancements. Experience with common PLC or packaged control systems applications e.g. Rockwell, Wonderware Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position:Chevron ENGINE is looking for high-performing Technical Geophysicist candidates to join our Earth Science team. The role provides a wide variety of technical products to support asset teams across the enterprise in a range of development settings and basins; offshore, onshore, conventional and unconventional, exploration through to development. Key responsibilities: Delivers key technical geophysical analysis products and interpretation such as: Seismic to well tie, Acoustic Impedance Inversion, Acoustic FD earth model building, Time2depth velocity modeling, Depth uncertainty analysis, Seismic data processing support, 4D CCUS (Carbon Capture Utilization and Storage) feasibility modeling and analysis Tasks will also include performance of routine compliance tasks, automated and manual software compatibility testing for periodic system and software upgrades, and close coordination with Subsurface Platform Systems Engineers Petrel and geophysical software development skills Teaming with US-based research and development groups focusing on developing and deploying geophysical products and workflows Continual communication with asset and exploration teams spanning the globe Required Qualifications: MSc degree in Earth Science, (Geophysics preferred) from deemed/recognized (AICTE) university At least 5 years industry related experience Industry Experience in technical geophysics including, but not limited to seismic interpretation, seismic-to-well tie, Acoustic Impedance inversion, acoustic FD earth model building, Time2depth velocity modeling, Depth uncertainty analysis, Seismic data processing support Experience with Petrel, DELFI would be a differentiator. Familiarity with Hampson-Russell, Jason, as well as seismic processing software skills will be a benefit Understanding of physical processes associated with earth science, reservoir modeling and subsurface Good communication skills and work effectively in a team environment Fundamental knowledge of geophysical workflows applied to subsurface Skills of using ML/AI to accelerate performance and accuracy of reservoir characterization is a plus Experience geophysical application within the oil and gas industry is preferred C# programing skills or Ocean SDK experience will be differentiating is a plus Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Process Engineering Lead is part of the Process Engineering and Automation team within Chevron s ENGINE Center. This role supervises a team of Process Engineers that provide technical support to Chevron s business units, such as supporting Operations to troubleshoot and optimize existing operating assets, process design support to capital projects and developing and implementing digital tools to enhance process monitoring. The Process Engineering Lead will manage a team that forms part of a larger Process Engineering function across Chevron, working closely with their counterparts in the Chevron Technical Center (CTC). Key responsibilities: Provide a safe, respectful work environment for the team Manage team in support of the team s subject matter consulting for capital projects or existing operations across the enterprise. Provide leadership direction in the areas of process engineering, facility optimization, process simulation, process troubleshooting of equipment items and capital project support. Collaborate with functionally linked CTC chapter manager(s) in work assignment and prioritization of the Process Engineering Team in the ENGINE. Coordinate training, mentoring, coaching, career development, performance management responsibilities for direct reports. Ensure that team and individual deliverables are understood, performance expectations are clear, and that progress is measured and reported. Participate in recruitment and hiring within Process Engineering and Automation team Required Qualifications: Bachelor s degree (B.E./B. Tech) in chemical engineering or related field from a recognized (AICTE) university Strong written and verbal English communication skills to interact with Chevron s global employee workforce Demonstrated supervisory experience of diverse engineering teams Preferred Qualifications: Proven 10-15+ years of process engineering experience in upstream, downstream, LNG or petrochemical process facilities. Possibly through operation support engineering assignments or process design work for capital projects. Experience in performing analytical calculations such as mass transfer, fluid flow, heat transfer, fluid dynamics, process control, kinetics and equipment sizing. Experience in working with process monitoring tools and process modeling software, such as PI, Seeq, Hysys, PROII, etc. Awareness of Process Safety Management concepts and principles such as Process Hazards Analysis, Alarm Objective Analysis, Integrity Operating Windows, etc. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Process Applications and Data Analytics Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and will offer comprehensive support to process analytic and visualization tools in Chevron s Upstream, Downstream and Midstream facilities. This includes design, implementation, and support of tools. This role Uses data analytics and data historians for configuring operations, maintenance, process simulation data tools for establishing correlations visualizations to identify value opportunities that improve performance. Key Responsibilities: Create process monitoring and data visualization tools to monitor equipment and processes at Chevron s Facilities This position will be populating historians, databases, and visualizations tools such as PI Asset Framework (AF), PI Vision, and SEEQ Stakeholder Management: Engage with various stakeholders to consolidate work processes from multiple locations into a centralized system Standardization and Optimization: Use relationships and alignment skills to standardize and optimize work products and processes Documentation and Tools: Utilize historians, databases, and visualizations tools such as PI Asset Framework (AF), PI Vision, and SEEQ Collaboration: Work closely with Facilities, Design, Solutions (FDS) Chapters within Chevron s Technical Center (CTC) Required Qualifications: Degree: Bachelor s degree in Engineering, Mathematics or Computer Science (B.E./B.Tech.) from a deemed/recognized (AICTE) university Technical Skills: Strong knowledge of Data Analytics and Data Visualization tools, Including PI Asset Framework, SEEQ, and Python Soft Skills: Strong written and verbal communication skills, including stakeholder management Preferred Qualifications: 5-10 years of experience in upstream, mid-stream, downstream or petrochemical processing Experience using and developing process monitoring tool Experience correlating data from multiple systems of record Knowledge of Inductive Automation Ignition Experience with building HTRI heat exchanger models Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Materials Corrosion Lead is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing technical leadership and supervision to a team of engineers to deliver materials, corrosion, coating and welding engineering consulting services to Chevron operating companies, affiliates capital projects worldwide. This role works collaboratively with the Chevron Technical Center (CTC) to provide technical support to the Enterprise and requires strong and demonstrated technical knowledge and experience in all aspects of materials corrosion discipline. Key responsibilities: Provide technical oversight, supervision, work prioritization, and direction to direct reports. Coach and mentor direct reports to grow capabilities in all aspects of materials corrosion discipline. Manage all aspects of direct reports performance and career development, including performance reviews, career development planning, succession planning etc. Responsible for timely delivery and quality of work products, services and solutions delivered by the team. Work collaboratively with BUs, technical leads at CTC and within the ENGINE to develop and deploy innovative materials, corrosion, coatings and welding solutions. Develop and deliver the teams business plan and support delivery of ENGINE MEQ Chapter business plan. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, or related engineering discipline from a recognized (AICTE) university. 7+ years technical supervisory experience in the oil and gas or petrochemical industry. Skilled competency level in both upstream and downstream metallurgy and corrosion. Skilled competency level in welding, coatings, cathodic protection, and non-metallics Fundamental knowledge of relevant technical codes and standards (NACE MR0175, API 571, ASME B31.3, B31.4, B31.8, ASME BPV Sec VIII, ASME Sec IX, ASME PCC-2) Fundamental competency level in fixed equipment integrity management (piping, equipment, pipelines, heat exchangers, tanks). Preferred Qualifications: 15+ years corrosion and materials engineering experience, with at least 10 years in the oil and gas industry. Masters degree in Corrosion, Metallurgy, or Materials Engineering Hands-on, field experience at upstream and downstream operating facilities NACE Specialist certification in materials selection, corrosion control, cathodic protection or pipeline integrity management. Experience managing research and development projects in materials, corrosion, coating and welding area Professional Engineering registration Experience with data analytics and digital tools Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Machinery Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and provides machinery engineering consulting services to Chevron Business Units and Capital Projects, including joint venture refineries across various pieces of machinery equipment, including but not limited to centrifugal and positive displacement pumping systems, reciprocating compressor systems, and the design of onshore and offshore lifting devices. Key Responsibilities: Provides technical support for centrifugal and positive displacement pumping systems, reciprocating compressor systems, and the design of onshore and offshore lifting devices Consults on pump and mechanical seal selection and performance evaluation Consults on reciprocating compressor performance evaluation and operational troubleshooting Reconciles Chevron Engineering Standards requirements versus industry standards and provides work to draft engineering standard revisions Contributes to Machinery Research Development projects Influences and collaborates with customers to solve technical problems with the best risk-based solution Supports project concept development, scoping, equipment selection, application evaluation, supplier selection, writing specifications, performing bid analysis, designing equipment, facilitating testing, assisting with field startup, performing troubleshooting, using and implementing digital solutions, and leading failure analysis Required Qualifications: Bachelor of Science in Mechanical Engineering from a recognized (AICTE) university Extensive experience in rotating equipment operation, maintenance, system optimization and machinery condition monitoring analysis Field experience in an operating environment Extensive knowledge of machinery design theory, sizing, and application to support early concepts engineering Preferred Qualifications: 10+ years of experience in an Oil and Gas operating facility Advanced degree in Mechanical Engineering (Masters or Doctorate) Vibration Analyst Certification, Level I or II Experience with Rotodynamic analysis software Oil gas or petrochemical experience, or experience working with a machinery fabricator Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the Position: Instrumentation and Electrical Facility Engineer is a member of Chevron s ENGINE Facilities Designs Engineering team providing instrumentation, controls, and electrical designs support to Chevrons Refining and Liquified Natural Gas (LNG) assets. This role is responsible for supporting the troubleshooting, analysis and development of IE engineering solutions for Chevrons complex process facilities. The IE Designs Engineering team provides remote technical support for operations, turnaround scope development, and projects. Key responsibilities: Provide instrumentation, controls, and electrical engineering support for process units within Chevron s complex process facilities. This will require collaboration with Operations, Maintenance and Technical functions within Chevron s assets Support the management of change process for instrumentation, controls and electrical design packages and associated changes Utilize Chevron and Industry Engineering Standards and Safety in Designs Support the design, troubleshooting, analysis and installation of distributed control systems instrumentation, safety instrumented systems (SIS), analyzers, electrical power distribution systems, rotating equipment control and monitoring systems, PLC control instruments, HART instruments, field measurement instruments, and other oil gas process technology equipment Provide active remote support working with Operations and other technical teams to scope instrumentation and electrical repairs and troubleshoot issues in process plants Support implementation of solutions through Routine Maintenance, Turnaround execution and projects Provide guidance for technical inquiries, issue technical recommendations, provide equipment and system troubleshooting, improve IE Engineering tools and support the development and improvement of IE Engineering work processes Provide engineering analysis, consultation and project management for small IE capital projects Leverage expertise and knowledge of instrument and electrical design codes and standards, safety instrumented systems, process control systems, field instrument selection and sizing, equipment procurement, field construction and repair practices, process safety information, management of change work process as well as process control and monitoring Required Qualifications: 3 years minimum site-based facility experience in a brownfield environment 3 years minimum experience as an IE Engineer directly supporting operations at a complex refinery, LNG facility or similar petrochemical environment Bachelor s degree in instrumentation or electrical engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) university Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Mechanical Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing expertise in areas in the mechanical design, thermal design, and fluid flow of multiple types of unfired heat transfer equipment. This role supports the design, fabrication, and troubleshooting of various types of heat exchangers: Shell tube, air coolers, brazed aluminum, etc. Key responsibilities: Thermal-hydraulic design calculations and analysis of new and existing heat exchangers using HTRI to evaluate performance. Review mechanical design of new heat exchangers Review heat exchanger mechanical design of existing heat exchangers to troubleshoot performance or leakage issues and propose solutions Perform heat exchanger monitoring and analysis to identify performance issues and propose solutions Review vendor design packages for new heat exchangers Required Qualifications: Bachelor s degree in mechanical or chemical engineering from a recognized (AICTE) university Proven experience with design, fabrication, and troubleshooting of various types of heat exchangers: Shell tube, air coolers, brazed aluminum, etc. Application of ASME BPVC, API 660, API 661, TEMA Skilled in the use of HTRI software Preferred Qualifications: 10+ years of experience in the mechanical and thermal design of heat exchangers Advanced degree in mechanical or chemical engineering (Masters or Doctorate) with focus on heat transfer Oil gas or petrochemical experience, or experience working with a heat exchanger fabricator Experience with PRO II, HSYSY, INSPECT, or PV Elite software Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Pipeline Integrity Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and provides pipeline integrity engineering support to the Chevron enterprise, includes Chevrons upstream, downstream and midstream facilities and projects. This role provides pipeline integrity assessments, in-line inspection (ILI) analysis, fit for purpose reports and pipeline defect assessments using Chevron and industry methods for the purpose of ensuring the reliability and integrity of Chevron pipelines. Key responsibilities: Reviews and validates integrity assessments hydrotest, in-line inspection (ILI) other pipeline integrity technologies Performs ILI data evaluations, reviews anomaly validations, evaluates pipeline defects, and recommends next inspection interval. Develops pipeline integrity and inspection plans Determines pipeline corrosion growth estimates response time for defect repairs or line replacement Conducts pipeline threat/damage assessment and defines inspection requirements Conducts leak detection capability evaluations (LDCEs) Develops pipeline pigging project execution plans and leak detection capability evaluations (LDCEs). Required Qualifications: Bachelors degree in engineering discipline (Mechanical, Civil, Metallurgical, or Chemical) from a recognized (AICTE) university Strong analytical skills in analyzing pipeline inline inspection (ILI) data. Proven experience in applying pipeline industry codes and standards: ASME B31.4, ASME B31.8, ASME B16.5, API 1160, ASME B31.8S, API 1163, API 1149, API 1130, API 1175 and DNV GL. Proficiency in computer application applicable to specific work including Excel and Word. Preferred Qualifications: 10+ years of proven experience in pipeline integrity management, pipeline inspection technology (in-line inspection and non-intrusive inspection technology), pipeline corrosion management, pipeline repair decisions, pipeline threat identification, risk assessment and pipeline regulations. Strong understanding of pipeline operations, maintenance, process safety and risk assessments Experience in facilities supporting pipeline integrity programs Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: Chevron strives to continue developing and commercializing new technologies in both the conventional oil refining business and new energy transition fields. Chevron, through the joint venture Chevron Lummus Global (CLG), also designs and licenses hydroprocessing technologies and provides technical and operational support to Chevron refineries and third-party clients. This position will work closely with the innovation function of the Chevron Technical Center. The Reactor Designer works with Reactor Engineers to produce design drawing packages for reactors, reactor internals, and high-pressure separator vessels. Key responsibilities: Utilize standardized tools to perform structural calculations to design and evaluate reactor internal components Use Autodesk Inventor parametric 3D CAD software to model components and produce reactor design packages Innovate, troubleshoot, and improve on existing designs and procedures Review fabricator technical drawings Occasional travel to fabrication shops and/or client refineries Inspect equipment and components at third-party fabrication shops Confined Space Entry into pressure vessels in refinery settings to perform final inspections of installed equipment Actively demonstrate Chevron Way behaviors and promote Incident and Injury Free culture (IIF) Complete all mandatory Chevron training on time Required Qualifications: Proficiency with 3D modeling/CAD software Proficiency with 2D CAD software Familiarity with Microsoft Excel 5 years experience producing technical design drawings Proficiency with Autodesk Inventor is preferred Proficiency with AutoCAD is preferred Knowledge of ASME pressure vessel design, welding, fabrication, and inspection is preferred Experience working in an industrial or manufacturing facility, including confined space entry is preferred Experience with Hydroprocessing reactors is preferred Experience with equipment design for technology licensing is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Process Control Simulation Lead is part of the Process Engineering and Automation team within Chevron s ENGINE Center. This role supervises a team that provides technical support for the enterprise in dynamic process modeling, operator training simulator development, process control, alarm management process data analytics and applications in the Chevron ENGINE Center. The Process Control Simulation Lead will manage a team that forms part of a larger Process Control Simulation function across Chevron, working closely with their counterparts in the Chevron Technical Center (CTC). Key responsibilities: Provide a safe, respectful work environment for the team Manage team in support of the team s subject matter consulting for capital projects or existing operations across the enterprise. Provide leadership direction in the areas of facility optimization, process control, dynamic integrated process simulation, operator training simulators, alarm management, process analytics process applications. Collaborate with functionally linked CTC chapter manager(s) in work assignment and prioritization of the Process Control Simulation Team in the ENGINE. Coordinate training, mentoring, coaching, career development, performance management responsibilities for direct reports. Ensure that team and individual deliverables are understood, performance expectations are clear, and that progress is measured and reported. Participate in recruitment and hiring within Process Engineering and Automation team Required Qualifications: Bachelor s degree in Chemical Engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) university Proven competency in process simulation, process control or related fields. Demonstrated supervisory experience Strong written and verbal communication skills to interact with Chevron s global employee workforce Demonstrated supervisory experience of diverse engineering teams Preferred Qualifications: Master s or higher degree in Chemical Engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) university Proven 10 15 years experience in process engineering with 10 years of direct experience in process control, dynamic process simulation or related fields Competency in data science and analytics Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Process Control Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and will be responsible for designing, implementing, and optimizing process control strategies and configuration to improve efficiency, safety, and reliability at Chevron operated facilities. This role involves working closely with cross-functional teams to develop and maintain control strategies, and automation solutions. This is a generalist process control position that will cover all aspects of process control including Regulatory Control, Advanced Process Control and Alarm Management. The engineer will work in close collaboration with a team of Process Control Subject Matter Experts in the Chevron Technical Center (CTC) and with Process Control Engineers at Chevron Operated facilities. Key responsibilities: Basic Process Control Develop, review or improve control philosophies for assigned project Review control loop tuning remediate issues using PlantTriage Perform process control analyses and troubleshooting using SEEQ and OSI PI. Design and implement control strategies to optimize process performance. Ensure compliance with industry standards and regulations. Collaborate with operations, engineering, and maintenance teams to identify and resolve control system issues. Implements and maintains basic and advanced regulatory process control strategies and console graphics Advanced Process Control Provides foundational support for advanced process control applications via the Chevron APC Technical Support Center in testing APC applications deployed into the Process Control Network in a development environment. Real Time Optimization benefits analyses Implements and maintains inferential calculations to support advanced control and optimization applications Support the execution and maintenance of advance process control and model based predictive controllers using DMC3. Alarm Management Provide general alarm management support for Chevron business units, including data analyses, maintenance of key performance indicators, alarm rationalization analyses and testing of new alarm management technologies. Participate in on-the-job training/development opportunities through mentoring with Houston s technical center counterparts Required Qualifications: Bachelor s degree (B.E./B. Tech) in chemical engineering or related field from a recognized (AICTE) university Experience with DCS control system: Yokogawa Centum VP, Honeywell Experion, Emerson DeltaV. Experience with common PLC or packaged control systems e.g. Compressor Control (CCC) and Rockwell desired. Strong written and verbal communication skills to interact with Chevron s global employee workforce Preferred Qualifications: 5-10 years in a process control role with an owner operator or control system supplier Loop tuning monitoring experience with applications such as PlantTriage or ControlWizard DMC3 or DMC+ experience Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Instrumentation and Control (IC) Project Support Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and will offer comprehensive support throughout the lifecycle of Instrumentation and Control (IC) projects in Upstream, Downstream and Midstream facilities. Provides project support for basic instrumentation design selection, including final control element control valves, setup and maintenance of engineering tools and applications such as SmartPlant Instrumentation (SPI). This includes design, implementation and completion. Key Responsibilities: Provide end-to-end support for IC projects, from initial design through to implementation and completion Deliver technical assistance to typical project instrumentation and control (IC) issues Assist in the design and implementation of instrumentation devices, ensuring compliance with industry standards and best practices Engage with various stakeholders to consolidate work processes from multiple locations into a centralized system Use relationships and alignment skills to standardize and optimize work products and processes Utilize instrumentation databases, and design tools (e.g., SmartPlant Instrumentation) Work closely with Facilities, Design, Solutions (FDS) Chapters within Chevron Technical Center (CTC) and participate in Instrumentation, Controls, Electrical (ICE) Community of Practice and associated Business Improvement Network (BIN) activities Required Qualifications: Bachelor s degree in electrical, mechanical engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) university Strong knowledge of field instrumentation and final control elements, process measurements, instrumentation databases, and design tools Strong knowledge of field instrumentation and final control elements industry standards (e.g., API, ISA, NEMA, IEC) Strong knowledge and understanding of industry practices and standards applicable to field instrumentation in the oil and gas industry (e.g., API, ISA, NEMA, IEC, etc.) Knowledge of IC project management and execution processes Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Financial Controller is responsible for the overall financial health of the company by managing all accounting functions, ensuring compliance with financial regulations, producing accurate financial reports, and providing strategic financial analysis to support business decision-making. This role combines individual contributions with people management responsibilities and reports to the ENGINE Finance and Tax Head. The Controller collaborates closely with accounting partners, centralized service centers, and the Corporate Accounting Group. Key Responsibilities: Financial Accounting: Oversee the accurate and timely preparation for India Financials Implementation and maintenance of accounting systems and software Internal Controls: Ensure compliance with Chevron s Corporate Internal Controls, SOX testing, DOA and Internal audit Ensure all relevant internal controls are in place and observed by all employees and business units. Communicate updates on Compliance policies and procedures to employees Understand and provide guidance on Chevron Compliance policies and procedures Audit Co-ordination: Act as the main point of contact of external auditors and government agency representatives for the audit of ENGINE books Address corporate audit requirements -Perform other activities as may be required by Corporate Audit Treasury: Oversee cash flow planning and ensure availability of funds as needed Support on cross-border transactions; urgent payments Ensure ECB Compliances Compliances: Monitor financial compliances and various regulatory filings required under applicable acts: STPI, GST, PF, PT, Bonus act, Company Law etc Provide policy guidance: Travel, Leaves, Credit cards etc Act as the main point of contact for the Procurement and Facilities team, providing guidance on compliance requirements for contracting parties and addressing concerns on corporate procurement policies Provide guidance on contract thresholds and recommend remedial actions as necessary Maintain good working relations and liaise, when necessary, with appropriate government agencies and other external parties regarding audit, compliance, and advancing the business interests of ENGINE Required Qualifications: 7-9 years of controllership experience working in multi-national enterprise Bachelor s degree in accounting, finance or a related field Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) A Graduate degree in business or accounting is preferred CA or CPA certification is preferred Experience in working with ERP systems (e.g., SAP, JDE) is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: We are seeking experienced engineers with expertise in Wells Engineering and operations. As a Wells Engineer, you will provide support across Chevron s global portfolio, leveraging modeling, analysis, and engineering insights. This position may also provide expertise for data analytics as well as the demonstrated ability to translate data analysis into successful business outcomes. Key responsibilities: Provide engineering modelling support for drilling, completions, and well performance areas to Chevrons Wells team leveraging modeling, analysis and engineering insights Monitor drilling and completions data, offering insights and recommendations Provide drilling and completions engineering modeling support including but not limited to Torque & Drag, Hydraulics, Surge & Swab, and Maximum Overpull, using industry-standard software packages Conduct lookbacks, generate reports, slide decks, and share with stakeholders to drive performance Collaborate with Wells teams to ensure safe and cost-effective operations Perform benchmarking analysis using various internal and external data sources, identify trends and technical comparisons between business units and competitors Collaborate closely with stakeholders in digital teams, business units, and center functions to ensure data quality, utilize analytical tools to report metrics and performance Explore how AI can be utilized in competitive performance work scope Required qualifications: Bachelor or Masters Degree from a recognized university in petroleum, mechanical, chemical, civil, or electrical engineering with minimum CGPA 7.5 and above Minimum 5 years of work experience in Oil and Gas Industry specializing in drilling with exposure to completions Experience in wells design, drilling operations, directional drilling, performance monitoring and optimization of well performance, performance analysis and benchmarking Highly experienced and skilled in running and interpreting drilling/completion models to improve wells performance In-depth knowledge of basic wells engineering concepts including drilling techniques, well control, fluids property management, drilling mechanics, performance monitoring Strong analytical skills to evaluate critical well design & operating parameters through data and trend analysis Technical skills to query tabular data models, develop analytical performance reports and motivation to grow new technical capabilities Strong communication skills and demonstrated ability to work and collaborate effectively with diverse international workforce in a team environment Field experience on a rig site as field engineer, drill-site representative (DSR), or DD/MWD engineer Experience with engineering applications and software such as ERA, WellView, proNova, Corva and Power BI Flexibility to work in shifts, with opportunities to leverage flexible work hours Position has potential for international travel Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: Chevron strives to continue developing and commercializing new technologies in both the conventional oil refining business and new energy transition fields. Chevron, through the joint venture Chevron Lummus Global (CLG), also designs and licenses hydroprocessing technologies and provides technical and operational support to Chevron refineries and third-party clients. This position will work closely with the innovation function of the Chevron Technical Center. The Reactor Engineer will produce design drawing packages for reactors, reactor internals, and high-pressure separator vessels, and perform Detail Design Follow Up (DDFU) activities which include fabricator drawing review, reactor internals fabrication shop inspection and final field inspections at refineries. Key responsibilities: Support CVX reactor engineering business including the reactor internal retrofit business with activities include scope input for proposals Perform engineering calculations for reactor and hot high-pressure separator (HHPS) design, including reactor internals Perform field and fabricator shop inspections for reactor and internals Perform Detail Design Follow Up (DDFU) activities which include fabricator drawing review, reactor internals fabrication shop. inspection and final field inspections at client refineries to ensure fabrications and installations meet specifications Develop and conduct training for less experienced engineers in the discipline Build and maintain strong relationships within Chevron and joint ventures such as that with Lummus Provide technical service including plant operation troubleshooting and turnaround support if needed Work closely with reactor science SMEs and participate in efforts to continue improving reactor internal designs Required Qualifications: Bachelor degree in Mechanical Engineering with minimum 5 years industrial working experience Strong background in high temperature high pressure vessel design and fabrication, ASME codes and other industrial standards Familiar with metallurgy materials and material treatment/fabrication processes such as welding Proficient with 3D modeling/CAD software such as Autodesk/AutoCAD to create 3D models Strong leadership skill Ability to handle multiple complex projects simultaneously with solid problem-solving skills Strong oral and written communication skills Ability to travel extensively (25%) This is a safety sensitive job Professional engineer certification is a plus Refinery operations experience particularly in hydroprocessing is a plus Demonstrated ability to develop and maintain strong relationships with colleagues outside their immediate work group is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: Chevron ENGINE is looking for accomplished Petrophysics Data Analyst candidates to join our Earth Science team. This position in Chevron ENGINE reports to the Engine Production Engineering and Petrophysics Manager and provides support to petrophysicists, as well as interfacing with the broader E&P organization, both in ENGINE and internationally. The ideal candidate will understand well log data quality, and management, and be able to effectively communicate with services, asset and research and development (R&D) teams to achieve technical objectives and meet deadlines. Capable execution of scripting in python and other languages will be central to effectively achieve technical milestones. Key responsibilities: Well log data management in multiple platforms and systems as required. Provides support to display, access, interrogate and transfer technical data across multiple platforms using Techlog, Petrel, ArcGIS and vendor interfaces Skilled user of Techlog for log data manipulation. Locates, loads, spatially QC s, and preps data for individual and field-wide well processing. Works on customized projects to generate specialized output (e.g., field-wide well log cgms, reservoir summary, displays, specialized log data formats for export into other programs, well header data, tops, etc.) Design, direct, and manage information management workflows. Able to write simple to moderately complex code for multi-well data manipulation and QC, and to work with programmers to create python workflows inside and outside of Techlog to manage, QC, and support data interpretation Leadership, teamwork and communication: effectively work with and support petrophysicists and partners in Engine, Technology Center and Business Unit locations. Able to align work activities with customer expectations. Exhibits initiative to implement action plans. Self-Starter: finds problems / issues and works towards solutions. Able to integrate ideas from other technical specialists and numerous customers Required Qualifications: Bachelor s degree in applicable STEM discipline 5+ years relevant industry experience with well log data and G&G applications Knowledge of petrophysics, well log data mnemonics and standards Knowledge of log data storage in databases and tools/systems, especially Techlog Oral and written communication skills for interacting with users and contractors and communicating progress to key stakeholders are preferred Understanding petrophysical processes, recognizing and solving problems, and making recommendations to the project team is preferred Proficiency with Python for data manipulation and quality control is preferred Familiarity with the Ocean programming environment is preferred Analytical skills for troubleshooting software problems and providing workarounds are preferred The ability to recognize problems before they escalate, quickly resolve problems, and implement changes to mitigate future occurrences is preferred Exhibiting leadership in petrophysical log naming and processing standards is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: This position ensures compliance with environmental regulations through data collection, analysis, and reporting, while providing guidance and support to internal teams on environmental issues. The Environmental Reporting Analyst reports to the Environmental Team Lead in Chevron ENGINE in Bengaluru, India. Key responsibilities: Provide guidance on the applicability of environmental regulations for air, water, and waste, and evaluate alternatives to meet compliance requirements Ensure data collection methods and practices comply with local, state, and federal environmental regulations and standards Record and organize collected data systematically ensuring accuracy and completeness Review and analyze data trends and patterns to identify potential environmental issues, compile compliance evidence for reporting and to identify potential/ actual non-compliance Undertake desktop assurance activities to identify potential environmental issues, compile compliance evidence for reporting and identify potential/ actual non-compliance Prepare reports to demonstrate compliance with environmental permits and regulations Identify and implement opportunities to embed and streamline environmental compliance activities within process data systems, for example automated alarming and notification systems Facilitate compliance with environmental permits, monitoring, reporting, and notifications Serve as support to the applicable BU for regulatory agency requests and audits Partner with internal customers, such as operations, maintenance, capital projects, technical, and HSE teams, to compile data for assurance and reporting Provide effective training for internal and external stakeholders on environmental data reporting and best practices Perform quality reviews of environmental data and reports for issues and gaps Required Qualifications: Minimum of 3 years of experience in environmental reporting, compliance, or permitting in the oil and gas industry, refinery, or manufacturing facility Proficient in data collection, analysis, and reporting methods and tools to ensure compliance with environmental regulations and standards Familiar with local, state and federal environmental regulations and reporting requirements, and able to communicate and coordinate with regulatory agencies effectively Able to provide environmental guidance and support to internal customers, such as operations, maintenance, capital projects, technical, and HSE teams Able to conduct quality reviews of environmental data and reports and identify and resolve issues and gaps Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: Chevron ENGINE is looking for high-performing candidates to join our Reservoir Modeling team with a focus on digital solutions development. The Reservoir Modeling team focuses on field development/application as well as technology development. This is a mid-career position in the Chevron ENGINE Earth Science Chapter for a knowledgeable earth scientist practitioner with digital solutions development (SLB Ocean and Petrel) applied to the subsurface domain. This role performs Reservoir Modeling related digital solutions development to support Chevron operations. Will be involved in enhancing Chevron s Reservoir Characterization and Modeling workflows to provide differentiating capability and integration of a mix of proprietary and best-in-class vendor products. The Reservoir Modeling and Digital Solutions Earth Scientist should have sufficient experience and expertise to deliver products with support from the Digital Platform. Key responsibilities: Responsible for the development and/or deployment of existing and new technology and workflows to solve key business challenges across Chevron The job involves integration of geological, petrophysical, geophysical and engineering data to create reservoir models used for resource evaluation and production forecasting Provides support to the Digital Platform, and is responsible for running, maintaining, supporting users and improving the Geology suite of Petrel-plugins Contributes to the development of new Geological plug-ins in Petrel (e.g. coding in Ocean, development of user interfaces and algorithms) Targeted user-experience and data management development (e.g., GUI, Power-BI, data engineering, Machine Learning engineering, and mature digital minimum viable products) Teaming with US-based R&D groups focusing on developing and deploying reservoir modeling and geology products and workflows Application testing, pipeline, build and release in cloud platform Development of technical digital solutions and training documentation Required Qualifications: MSc/PHD degree in Earth Science or Engineering from deemed/recognized (AICTE) university At least five years of experience in Earth Science or Engineering or related industry Proficiency with Petrel or equivalent Earth Modeling suite Demonstrated fluency in digital solutions development, including python, C#, C++, Azure ecosystems developments (pipelines, dashboards, visualization, data management systems) Understanding of physical processes associated with earth science, reservoir modeling and subsurface. Experience with customer support and understanding of subsurface business needs and utilizing Scaled Agile Framework (SAFe) processes to implement highly prioritized features Good communication skills and ability to work effectively in a team environment Fundamental knowledge of geological workflows applied to subsurface Familiarity with SLB Ocean development framework is preferred but not a must Skills of using Machine Learning/AI to accelerate performance, and accuracy of reservoir characterization and modeling is preferred but not a must Direct experience with discretization of reservoir models is preferred but not a must Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

About the position: The Turnaround Planner is a team member of the Maintenance and Turnaround organization within the Chevron ENGINE Center. The role provides turnaround and maintenance planning support to Chevrons Refining and Liquified Natural Gas (LNG) assets. This role will support the development of detailed job plans and accurate resource estimates for turnaround work scope. This position will collaborate across multiple levels of the organization and within multi-discipline teams including Operations, Engineering, Maintenance, and Reliability. This role forms part of a larger Maintenance & Turnaround Planning network across Chevron. Key responsibilities: Develop fully integrated job estimates and work plans for multiple concurrent facility turnarounds across several operating assets. The Planner will work closely with Operations, Technical, and the Turnaround Core Teams to generate the tasks that feed into detailed plans and schedules The Engine Planner will work with Turnaround core team members in Chevrons Refining and LNG assets to develop cost and schedule estimates Validate turnaround scope is complete and assist with scope submissions for final evaluation Ensures scope plans are accurately detailed in appropriate scheduling tools (Primavera) Works closely with Procurement to order and track long lead material for large turnaround and capital project scope Develop Plot Plans and scope plotting density. Assist Turnaround Maintenance Team Leads on all deliverables for Peer Reviews Coordinate with operating facilities and contractors as necessary to ensure turnaround schedule alignment, analyze schedule data, and provide regular updates to stakeholders Document all lessons learned from all Phases of turnaround planning Adopt digital tools as rolled out for use and provide feedback to product owners Applies industry standards and best practices for Turnaround planning and execution while collaborating with cross-functional teams across Chevron refineries and LNG facilities Required Qualifications: 3-5 years of field experience supporting the execution of maintenance turnarounds for complex process facilities Degree in relevant Engineering or Maintenance Discipline 5 years relevant turnaround execution and planning experience providing technical and turnaround planning support to plant turnaround teams in a complex oil and gas operating environment is preferred Knowledge of scheduling tools (Primavera) and planning tools (salesforce) is preferred Experience in supporting Operations within the Refining or LNG industry is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Robotics Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE team and will be part of Chevron s broader Robotics program. Robotic systems are playing a transformational role in oil and gas, chemical and other process industries. Chevron is a leader in this effort with a technical center lead Robotics Program with the specific goal to reduce cost, reduce risk to workforce, as well as to maintain competitive advantage among our peers. This role works closely with Robotics engineers and project engineers in the technical center as well as with key robotic developers, integrators and service providers in the region. One of the key aspects of this role is to enable scale up and adoption by classifying and maintaining the robotic technology catalog and Chevron s internal technology solution libraries that can be leveraged across the enterprise. Key responsibilities: The Robotics Engineer will initially share, and then Lead in the development and implementation of robotic technologies aligned with overall robotics program goals/objectives. Execute Robotic testing and qualification efforts. Develop testing protocols, plan execute demonstrations, to reduce uncertainty and improve likelihood during deployments across Chevron facilities. Qualify, rank and catalog capabilities and limitations of Robotics solutions. Accelerate the development of payload and data integration for robotic systems by leveraging Chevron ENGINE resources and regional resources while continuing to identify and address barriers and challenges. Identify share challenges to life cycle management aspects of Robotic tools for long term sustainability to avoid erosion of value. Engage BU Technology Champions and develop business case for Robotics opportunities. Understand the current practices, processes and costs while comparing it with the innovative/new solutions and costs for integration and adoption. Prepare economic projections and technology value analysis using standard practices. Influencing change across a wide geographical area. Demonstrate capability to effectively evaluate and articulate tradeoffs with cost, schedule, reliability, and operability using predeveloped dashboards and available data sources. Ability to quickly grasp a wide array of technologies, communicate to a diverse set of stakeholders, and identify barriers to scale up and adoption with corresponding mitigations. Required Qualifications: Engineering degree in one of the following - Chemical, Mechanical, Electrical Electronics, Mechatronics (B.E./B.Tech.) from a recognized (AICTE) university Experience with development and implementation of robotic technologies in processing facilities Experience leading testing and qualification efforts of new technologies. Develop testing protocols, plan execute demonstrations Preferred Qualifications: 5+ years in Refinery, petrochemical or Complex upstream Facility Maintenance/Operations experience equivalent Advanced degree in robotics or mechatronics Refinery or complex process facility as Reliability, Integrity, or Process Engineer Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Permit Writing Lead is a team member of the Maintenance and Turnaround organization within the Chevron ENGINE Center and leads a team responsible for the Permit Writing to support Chevrons Refining and Liquified Natural Gas (LNG) assets. This role supervises a team of Permit Writers that are responsible for drafting permits for Maintenance and TAR asset teams within Chevron s LNG facilities. Key responsibilities: Manage the Permit Writers responsible for planning and scheduling of all non-turnaround field execution work at the site that is performed by various crafts. SME on Permit Design and drive accountability regarding the use of standard Control of Work Manuals and Standards planning and estimating tools and practices. Accountable for the growth and development of Permit Writers. Manage the delivery of quality execution work plans and updates on scope status and forecast. Collaborate with site representatives to determine work scope to be executed by maintenance teams. Works closely with Operations to ensure Permits are effectively integrated into the operating plan. Partners with the Maintenance Team Leads ensuring all crafts feed work into the workflow and preparing the work for the field. Develop tools to streamline cost and execution forecasting and report on status at the individual project and portfolio level. Seek opportunities to remove inefficiencies from permitting activities. Clearly communicate scope progress to customers, stakeholders, and team members. Assist in growing Permit work process competency within the ENGINE. Provide coaching, mentoring, leadership, and guidance on maintenance processes across various departments including Turnaround (TAR), Front-end-Loading (FEL), Core Maintenance, Production, Engineering, and Planning Scheduling Supporting backlog management actively to prioritize and address pending tasks efficiently. Participating in incident investigations to identify root causes and implement preventive measures, contributing to a safer work environment. Participate in hiring and organizational design as required. Support succession planning discussions with leadership teams for the ENGINE maintenance and turnaround organization. Required Qualifications: Experienced operations (maintenance or production) background Deep knowledge in maintenance and production planning and permitry Experience working with control of work or permit to work systems and the preparation of permitry in Refineries and/or LNG facilities Experience in Maintenance and Operation Planning Scheduling Leadership within the Oil and Gas sector, particularly in LNG and refinery operations. Preferred Qualifications: 10+ years of field experience supporting the planning and execution of maintenance activities in a complex processing facility Knowledgeable in construction industry best practices. Experience with mechanical, electrical, instrumentation/controls, civil and related disciplines while also having a good working knowledge of complex facility operations, preferably LNG facilities. Experience in mentoring, coaching, and training is desirable. Proficient in Excel, JDE, SAP, Prometheus, Primavera P6 Prior experience using Permit Vision or other electronic Control of Work systems. Demonstrated track-record of proactively identifying solutions to problems before they arise and developing contingency plans. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Mechanical Engineer is part of the Materials Equipment Quality (MEQ) team at the Chevron ENGINE and is responsible for providing expertise in areas of pressure vessel piping mechanical design/repair/alteration, code interpretation, and post construction repair across Chevron assets. Key responsibilities: Provides enterprise-wide support of in-service pressure vessels and piping, new construction project support, and maintains Chevron s technical standards Assist with concept development, work scoping, troubleshooting, failure analysis and repairs. Support research and technology development projects, Perform mechanical design analysis, using finite element analysis (FEA), of fixed equipment components in pressure vessels, heat exchangers, and piping. Determine stresses applied to components are within allowable stress limits and determine max strain/deflections are also within allowable limits Apply fracture mechanics, fatigue, buckling, creep, and mechanical design principles to evaluate components in mechanical equipment are within allowable stress range Select post construction repair options for mechanical equipment (sleeves, patches, weld repairs, etc) and validate the design meets ASME code requirement Review supplier pressure vessel design packages Required Qualifications: Bachelors degree in mechanical engineering from a recognized (AICTE) University. Proven experience with ASME Sec VIII Division 1 and 2, PCC-2 Proven experience performing finite element analysis (FEA) Skilled use of an FEA software package such as SolidWorks, Ansys, or Abaqus Skilled use of a pressure vessel design software package such as Compress or PV Preferred Qualifications: 10+ years of experience in pressure vessel or mechanical design in the oil gas industry Advanced degree in Mechanical Engineering (Masters or Doctorate) Oil gas or petrochemical experience, or experience working with a pressure vessel fabricator Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Quality, Integrity, Reliability (QIR) and Robotics Lead is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is the leader of a team of Quality Assurance, Asset Integrity, Reliability and Robotics Engineers with Chevron ENGINE providing engineering, consulting services, technology solutions deployment support. Key responsibilities: Manage the performance of the team by establishing clear goals and expectations, measuring progress and sharing results across Chevron ENGINE and with stakeholders across the enterprise. Provides coaching, performance feedback, mentoring, career development and regularly engages team to help remove barriers for the team. Ensures and provides the team has a safe respectful work environment. Understand the requirements and priorities from Chevon Technical Center as well as by engaging stakeholders across the business units and operating facilities and communicates work requirements and priorities to team members. Responsible for timely delivery and quality of work products, services and solutions delivered by the team. Engages in deep technical aspects of the work when needed, while also removing barriers for the team to progress work. Leads, frames and develops scope and supports executing projects/opportunities of large and complex under minimal supervision, which involves one or more engineering disciplines like reliability, integrity, advanced NDE inspections, quality assurance and robotics technologies. Oversees the delivery of workflows covering Reliability, fixed equipment pipeline Integrity, Quality Assurance, advanced NDE and Robotics area by partnering with Chevron Technical Center. Implements existing Chevron processes and systems in support of required work activities Ensure and support continuous improvement of work process, procedures, practices, applications, data and tools are effective and efficient to meet Chevron and industry requirements. Ensure lessons learned are shared and incorporated into work practices and processes Foster an inclusive environment both within the team and with the other functions and organization in ENGINE. Develop and deliver the teams business plan and support delivery of ENGINE MEQ Chapter business plan. Ensure team works within budget and meets business plan objectives. Required Qualifications: 7+ years of demonstrated supervisory experience within Oil Gas or petrochemical industry Bachelor s degree in mechanical, electrical, chemical, or reliability engineering (B.E./B.Tech./M.E./M. Tech.) from a recognized (AICTE) university Preferred Qualifications: 15+ years relevant experience providing engineering support in two or more of the areas of responsibility such as reliability (Incident Investigation facilitation, development of Reliability centered maintenance strategies, and application of Reliability system modelling for availability analysis), integrity, advanced NDE inspections, Quality assurance and Robotics Tools Technologies in oil and gas operating environment. Masters/Doctoral degree in mechanical, electrical, chemical, or reliability engineering API certifications on fixed equipment (PV, Tanks, Pipelines or Piping) 510, 570, 653. Extensive knowledge of all applicable codes such as ASME, ISO, AWS, API, and DNV Reliability tools/technology certifications and training SMRP ASNT Level III or equivalent ISO certification in one or more NDE techniques Experience /Exposure to Capital Projects (all phases). Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 1:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Process Simulation Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and supports Chevron s Facilities and Operations of the Future program. This role is responsible for work supporting key research and development of digital engineering computer-based modeling and simulation tools to enhance the companys facilities engineering models. This role involves working with various types of equipment models, including facilities process models, pipeline models, and other specialty models. The engineer will utilize steady state process models, dynamic process models, data-driven models, and special modeling technologies to evaluate improvements to process simulation workflows. Key responsibilities: Research Development of new technologies in Digital Process Systems Engineering space. The roles spans technologies related to process simulation modeling, process control and optimization, technical safety, among others. Identification, scoping, development and timely delivery of Product Features and User Stories under Scaled Agile Framework (SAFE) or Waterfall project management methodologies. Interfacing with a broad set of stakeholders in Chevron Technology Center and Business Units, and with external parties such as industry partners and vendors. Research, develop and oversee RD efforts for process simulations for facilities engineering models. Utilize tools such as Aspen HYSYS, Promax, and HTRI for process modeling and simulation. Evaluate engineering documents such as process flow diagrams (PFDs) and guidelines to develop simulations of simple processes. Resolve basic modeling issues and assist with the interpretation and reporting of modeling results. Follow established guidelines for thermodynamic packages and specific technology modeling strategies. Required Qualifications: Bachelor s degree in chemical engineering (B.E./B.Tech.) from a deemed/recognized (AICTE) university 5+ yrs of experience in software engineering, data engineering and cloud computing platforms (Azure). Preferred Qualifications: 5+ yrs of field experience working process engineering and/or process control roles in the Downstream and/or Upstream sectors of Operator or EPC companies in the Oil and Gas value chain. PhD (preferred), M.S, in a STEM-related field such as Chemical Engineering or Computer Science. Proficient with Agile and Waterfall project management methodologies and tools. Proven experience using Azure DevOps for managing user stories, dashboards, queries, code repos and code version control. Prior experience with programming languages such as Python and C# , and data science libraries such as Numpy, Scikit-learn, Pandas, Matplotlib, Seaborn, Keras, TensorFlow. Experience with process simulation and monitoring software such as Hysys (required), Flarenet (required), ProII (required), AspenOnline (preferred). Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Pipeline Integrity Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and provides pipeline integrity engineering support to the Chevron enterprise, includes Chevrons upstream, downstream and midstream facilities and projects. This role provides pipeline integrity assessments, in-line inspection (ILI) analysis, fit for purpose reports and pipeline defect assessments using Chevron and industry methods for the purpose of ensuring the reliability and integrity of Chevron pipelines. Key responsibilities: Reviews and validates integrity assessments hydrotest, in-line inspection (ILI) other pipeline integrity technologies Performs ILI data evaluations, reviews anomaly validations, evaluates pipeline defects, and recommends next inspection interval. Develops pipeline integrity and inspection plans Determines pipeline corrosion growth estimates response time for defect repairs or line replacement Conducts pipeline threat/damage assessment and defines inspection requirements Conducts leak detection capability evaluations (LDCEs) Develops pipeline pigging project execution plans and leak detection capability evaluations (LDCEs). Required Qualifications: Bachelors degree in engineering discipline (Mechanical, Civil, Metallurgical, or Chemical) from a recognized (AICTE) university Strong analytical skills in analyzing pipeline inline inspection (ILI) data. Proven experience in applying pipeline industry codes and standards: ASME B31.4, ASME B31.8, ASME B16.5, API 1160, ASME B31.8S, API 1163, API 1149, API 1130, API 1175 and DNV GL. Proficiency in computer application applicable to specific work including Excel and Word. Preferred Qualifications: 10+ years of proven experience in pipeline integrity management, pipeline inspection technology (in-line inspection and non-intrusive inspection technology), pipeline corrosion management, pipeline repair decisions, pipeline threat identification, risk assessment and pipeline regulations. Strong understanding of pipeline operations, maintenance, process safety and risk assessments Experience in facilities supporting pipeline integrity programs Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Complex Processing Facility (CPF) Process Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and is responsible for providing process engineering support to Chevron s Refining and large upstream processing facilities. This role supports Chevron s complex process facilities (CPF s) to troubleshoot and optimize existing operating assets, providing process design support to capital projects and developing and implementing digital tools to enhance process monitoring. Key responsibilities: Provide timely technical service consultation to LNG and Refining operating assets and capital project teams supporting new asset development and/or operational issues in existing projects and assets. Review and improve designs for operability, reliability, and ease of maintenance Support early phase project design execution by developing process documents such as heat and material balances and process datasheets Develop and maintain detailed process simulation models to evaluate design and operating scenarios (Hysys, etc.) Support day-to-day operations by providing engineering analysis and process troubleshooting of equipment items utilizing data analytics and process monitoring tools (PI, Seeq, etc.) Participate in on-the-job training/development opportunities through mentoring with Chevron Technical Center counterparts Required Qualifications: Experience with one or more refining technologies: Crude and Vacuum Distillation, Alkylation, Fluid Catalytic Cracking, Delayed Coking, Reforming, Hydrogen Manufacturing, Amine/Sour Water, and/or Hydro-processing. Bachelor s degree (B.E./B. Tech) in chemical engineering or related field from a recognized (AICTE) university Strong written and verbal communication skills to interact with Chevron s global employee workforce Preferred Qualifications: 5-10+ years of process engineering experience in Refining or petrochemical process facilities. Possibly through operation support engineering assignments or process design work for capital projects. Experience in performing analytical calculations such as mass transfer, fluid flow, heat transfer, fluid dynamics, process control, kinetics and equipment sizing. Experience in working with process monitoring tools and process modeling software, such as PI, Seeq, Hysys, PRO/II etc. Experience with small projects to improve yield, throughput or energy efficiency Awareness of Process Safety Management concepts and principles such as Process Hazards Analysis, Alarm Objective Analysis, Integrity Operating Windows, etc. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The Materials Corrosion Lead is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing technical leadership and supervision to a team of engineers to deliver materials, corrosion, coating and welding engineering consulting services to Chevron operating companies, affiliates capital projects worldwide. This role works collaboratively with the Chevron Technical Center (CTC) to provide technical support to the Enterprise and requires strong and demonstrated technical knowledge and experience in all aspects of materials corrosion discipline. Key responsibilities: Provide technical oversight, supervision, work prioritization, and direction to direct reports. Coach and mentor direct reports to grow capabilities in all aspects of materials corrosion discipline. Manage all aspects of direct reports performance and career development, including performance reviews, career development planning, succession planning etc. Responsible for timely delivery and quality of work products, services and solutions delivered by the team. Work collaboratively with BUs, technical leads at CTC and within the ENGINE to develop and deploy innovative materials, corrosion, coatings and welding solutions. Develop and deliver the teams business plan and support delivery of ENGINE MEQ Chapter business plan. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, or related engineering discipline from a recognized (AICTE) university. 7+ years technical supervisory experience in the oil and gas or petrochemical industry. Skilled competency level in both upstream and downstream metallurgy and corrosion. Skilled competency level in welding, coatings, cathodic protection, and non-metallics Fundamental knowledge of relevant technical codes and standards (NACE MR0175, API 571, ASME B31.3, B31.4, B31.8, ASME BPV Sec VIII, ASME Sec IX, ASME PCC-2) Fundamental competency level in fixed equipment integrity management (piping, equipment, pipelines, heat exchangers, tanks). Preferred Qualifications: 15+ years corrosion and materials engineering experience, with at least 10 years in the oil and gas industry. Masters degree in Corrosion, Metallurgy, or Materials Engineering Hands-on, field experience at upstream and downstream operating facilities NACE Specialist certification in materials selection, corrosion control, cathodic protection or pipeline integrity management. Experience managing research and development projects in materials, corrosion, coating and welding area Professional Engineering registration Experience with data analytics and digital tools Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use

Total Number of Openings1 About the position: The LNG Process Engineer is part of the Process Engineering and Automation team within Chevron s ENGINE Center and is responsible for providing process engineering support to Chevron s business units with Liquified Natural Gas (LNG) operations. This role supports LNG Operations to troubleshoot and optimize existing operating assets, providing process design support to capital projects and developing and implementing digital tools to enhance process monitoring. Key responsibilities: Provide timely technical service consultation to LNG operating assets and capital project teams supporting new asset development and/or operational issues in existing projects and assets. Review and improve designs for operability, reliability, and ease of maintenance Support early phase project design execution by developing process documents such as heat and material balances and process datasheets Develop and maintain detailed process simulation models to evaluate design and operating scenarios (Hysys, etc.) Support day-to-day operations by providing engineering analysis and process troubleshooting of equipment items utilizing data analytics and process monitoring tools (PI, Seeq, etc.) Participate in on-the-job training/development opportunities through mentoring with Chevron s Technical Center (CTC) counterparts Required Qualifications: Experience with varied LNG technologies (Air Products and Chemical s Propane Precooled Mixed Refrigerant Process (APCI C3/MR), ConocoPhillips Optimized Cascade Process, Chart IPSMR, etc.) Bachelor s degree (B.E./B. Tech) in chemical engineering or related field from a recognized (AICTE) university Strong written and verbal communication skills to interact with Chevron s global employee workforce Preferred Qualifications: 5-10+ years of process engineering experience in LNG or petrochemical process facilities. Possibly through operation support engineering assignments or process design work for capital projects. Experience in performing analytical calculations such as mass transfer, fluid flow, heat transfer, fluid dynamics, process control, kinetics and equipment sizing. Experience with the front end of LNG plants, including Amine, Dehydration and Mercury Removal systems. Experience in working with process monitoring tools and process modeling software, such as PI, Seeq, Hysys, etc. Awareness of Process Safety Management concepts and principles such as Process Hazards Analysis, Alarm Objective Analysis, Integrity Operating Windows, etc. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law. Bengaluru, Karnataka Privacy and Terms and Conditions We respect the privacy of candidates for employment. This Privacy Notice sets forth how we will use the information we obtain when you apply for a position through this career site. If you do not consent to the terms of this Privacy Notice, please do not submit information to us. Please access the Global Application Statements , select the country where you are applying for employment. By applying, you acknowledge that you have read and agree to the country specific statement. Terms of Use