Long Description 1 Long Description 2 Long Description 3 Long Description 4 Show more Show less

Long Description 1 Job Summary (Brief overview on the scope of job responsibility): Perform inspections as and when assigned in accordance to Client and BV guidelines. Interrelationships (Other key functional or communicational lines): Communicate with Supervisor and Manager for any enquiry and technical support. Communicate with coordinators and report reviewers as needed. Job Responsibility & Accountability (Key Roles, functions & accountability): Manage the operations of the station office (if assigned). Fully understand and conduct inspections independently / as a member of the inspection team as per the SOP / Field instructions. Effective communication with office staff and factory representative. Prepare inspection reports which are complete, comprehensive and presented in a manner consistent with Client / BV guidelines. Ensure that Code of Conduct and Jon Completion Summary are completely filled and submitted to office within the required time. Participate in all the training courses as and when scheduled. Fully understand and comply with the requirements of ISO 17020 standards such as controlling and filing of all relevant documents, draft and final audit reports. Clarify all inspection related queries with Supervisor and Manager. Ensure confidentiality of information obtained during the course of employment in BV. Ensure that the equipment / other infrastructure provided by company are not mishandled / damaged. Support the Supervisor / Manager / for any other job as assigned. Required Skills & Qualification:- A university degree and above or diploma in the field of Textile / Manufacturing / Quality management / Engineering or related disciplines. Minimum of 1 - 3 years (for inspector) in buying office, factory. Good command of English and local language, both oral and written. Good knowledge of computers. Good interpersonal communication skills. Good time management skills. Attention to detail and process improvement skills. Must be confident, highly efficient and self-motivated. High level of integrity. Must be able to work independently as well as in a team environment. Willingness to travel extensively. Long Description 2 Long Description 3 Show more Show less

Review of applicable contractual requirements (technical standards, specifications, etc) & highlight execution/inspection problems if any. Inspection of Pressure Vessels & components: (Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process Plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Selection of the most appropriate inspection techniques. Monitoring, coaching and supervising of one or more inspectors. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Show more Show less

Ø Major Responsibilities Inspection, Quality Control, Assessment of various HT/LT Elect Equipment like Motors, Generators, Transformers, Switchboards, Switchgears, cables, insulators, Control Panels, Battery Chargers, Switchyard items etc, at vendor premises & Sites. Quality Audit, testing witness, verification of testing procedures of various equipment, review of vendor drawings, technical specifications. Site inspection of Electrical Installations at Power Plant locations. Inspection of Solid core insulators, Circuit Breakers, Cables HT and LT, Panels HT and LT, FLP equipments, motors etc., for various Projects. Inspection of Protection relay, pressure, temperature gauges, indicators, switches, transmitters, for various projects Inspection of Computer hardware, servers etc. Vendor evaluation, Customer satisfaction surveys, coordination with vendors and clients. Developing new clients and Tender bidding Training on safety Preparation of Conformity Report and Non-conformity Report of different Electrical equipments and materials. Analysis of the quality of Electrical equipments and materials as per Indian Standard and International Standard and take suitable measures for quality control as per the standard. Carry out different testing on the electrical equipments and materials for compatibility checking as per requirement of the consumer. Ø Qualification and Experience An Engineering Graduate/Diploma / B.SC (Electrical/Instrumentation) with minimum 3-5 years of relevant experience. Show more Show less

Review of applicable contractual requirements (technical standards, specifications, etc) & highlight execution/inspection problems if any. Inspection of Pressure Vessels & components: (Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process Plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Selection of the most appropriate inspection techniques. Monitoring, coaching and supervising of one or more inspectors. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Show more Show less

Review of applicable contractual requirements (technical standards, specifications, etc) & highlight execution/inspection problems if any. Inspection of Pressure Vessels & components: (Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process Plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Selection of the most appropriate inspection techniques. Monitoring, coaching and supervising of one or more inspectors. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Show more Show less

Purpose of Position Project Management including Quality Surveillance and Expediting as a part of Third party inspection of various items for various Projects. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy ⮚ Major Responsibilities Handling PCM Siebel software tool to monitor the Project Progress i.e. starting from Inspection schedule, man-day planning, Time Study, Cost Control by assigning multiple tasks within a given time frame, Project Time sheet and Reporting to client. Inspection coordination and execution of Large project for various clients. Assistance for approval of Project documents for various mechanical items require for inspection at vendor end. Responsible for preparation of annexure for invoicing and ensuring that the Correct Invoices are issued in a timely manner to client. Coordinate WWSI Inspection notifications and preparation of annexure for invoicing and ensuring that the Correct Invoices are issued in a timely manner to client.. ⮚ Roles & Responsibilities For HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects. ⮚ Criteria for Performance Evaluation (KPIs) Perform & deliver to client as per contract and client expectations. ⮚ Qualification And Experience Diploma/ BE Mechanical with 3-6 years experience in project co-ordination & QA/ QC field. Skills & Qualities: Excellent interpersonal skills. An intrinsic Task Master. Should have good leadership abilities and skills. Should have a pleasing personality Good communication and presentation skills. Proficient in MS office Self starter Show more Show less

Major Responsibilities Inspection, Quality Control, Assessment of various HT/LT Elect Equipment like Motors, Generators, Transformers, Switchboards, Switchgears, cables, insulators, Control Panels, Battery Chargers, Switchyard items etc, at vendor premises & Sites. Quality Audit, testing witness, verification of testing procedures of various equipment, review of vendor drawings, technical specifications. Site inspection of Electrical Installations at Power Plant locations. Inspection of Solid core insulators, Circuit Breakers, Cables HT and LT, Panels HT and LT, FLP equipments, motors etc., for various Projects. Inspection of Protection relay, pressure, temperature gauges, indicators, switches, transmitters, for various projects Inspection of Computer hardware, servers etc. Vendor evaluation, Customer satisfaction surveys, coordination with vendors and clients. Developing new clients and Tender bidding Training on safety Preparation of Conformity Report and Non-conformity Report of different Electrical equipments and materials. Analysis of the quality of Electrical equipments and materials as per Indian Standard and International Standard and take suitable measures for quality control as per the standard. Carry out different testing on the electrical equipments and materials for compatibility checking as per requirement of the consumer. Ø Qualification and Experience An Engineering Graduate/Diploma / B.SC (Electrical/Instrumentation) with minimum 10 - 12 years of relevant experience. Show more Show less

Review of applicable contractual requirements (technical standards, specifications, etc) & highlight execution/inspection problems if any. Inspection of Pressure Vessels & components: (Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process Plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Selection of the most appropriate inspection techniques. Monitoring, coaching and supervising of one or more inspectors. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Show more Show less

Ø Purpose of Position To be responsible for the HSSE function of West Region and HO – CIF Ø Major Responsibilities Lead and animate the HSSE network for CIF West and HO O&P operations. Participate in the recruitment, training and assessment of HSSE resources Coordinate the entity tasks (Management System, Audit & reports) for CIF Cascade Group / APM-OG / CIF SAR information across the CIF West and HO (newsletter, alerts, feedback from LG meeting, etc.) Identification of local high risk activities and ensure that processes are in place to protect employees and mitigate the environmental impact Mapping of local business processes and ensure they are understood and complied with Track and report required HSSE KPIs to HSSE Department CIF SAR and local management as applicable Develop or update necessary local procedures to comply with applicable requirements Lead or maintain the ISO 14001 and ISO 45001 certifications Identify and disseminate best practices within the Entity. Conduct Root Cause Analysis of on-performance, propose corrective and preventive actions Analyse Group Safety/Security Alerts, propose local action plan to management and report implementation to Group Check the deployment of the Client Satisfaction survey processes Communicate local safety alerts to country employees and manager Deploy Safety/security Campaigns in coordination with HR network Ensure QHSSE induction and training material are appropriate, include Group e-learning modules, and coordinate with HR for the annual training plan. If necessary, deliver training Ensure with local management that PPEs are properly managed Conduct incidents & accidents investigation Coordinate audit program and conduct internal audits with QESIS Track corrective & preventive action implementation Coordinates Management Review Ø Roles & Responsibilities for HSE Responsible for compliances of all applicable statutory laws and regulations as well as Group HSE policies and procedures etc. in relation to Health safety and environment and workmen employment. Responsible to take reasonable care on health and safety at their own, colleagues and others working surroundings. Responsible to report promptly to immediate superior on any abnormalities and incidents found related to Health Safety and Environment Ø Criteria for Performance Evaluation (KPIs) Safety: FAT, LTR, TAR, ASR, Near Hits, First Aids, causes of accidents, number and investigation of serious accident Environmental: Carbon footprint reduction (compare to Y-1) Prevention: number of HSSE induction and initial medical surveillance, number of internal audits, number and causes of near hits, number of STBT Group / APM OG / CIF SAR programs: monitoring of safety campaigns KPIs. Ø Qualification and Experience Science Graduate / Engineering Diploma / Engineering Degree and Diploma in Safety Management course duly approved by All India Council of Technical Education, Minimum 7 years of Experience in HSSE domain Skills & Qualities: Technical competencies are required ISO 14001 ISO 45001: able to conduct internal audit, to maintain certifications Legal applicable requirements: knowledgeable in applicable local legal requirements Accident investigation: able to coordinate an accident investigation (5 whys) Excellent interpersonal skills Demonstrated good leadership qualities. Good communication and presentation skills The Job Description is subject to change from time to time, as per the requirements of the Company and the Competencies / qualifications you may acquire in future Show more Show less

Job Title: Lead Auditor Entity: Bureau Veritas India Pvt. Ltd, Location: As per Location Reports to (job): Head Of Certification Ø Purpose of Position The job incumbent is responsible to conduct value added audits of the clients against the requirement of the relevant standard. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy. Ø Major Responsibilities As a professional, carry out all activities related to profession in accordance with BV code of ethics and confidentiality requirements. To conduct audits in accordance with IATF rule requirement, Business Management System and BVC India Operations Manual. To keep self updated with latest regulatory requirements & technologies pertaining to sectors/ schemes under audit. To manage time effectively throughout entire audit cycle – From planning to reporting. In the role as auditor (team member), to cooperate and coordinate with audit team leader during the audit. In the role as lead auditor (team leader), manage the team in a effective manner. To report / inform reporting line / back-office / team leader for any unexpected situation faced during the audit. (Examples – less time available for audit against planned due to situations beyond control, audit cancellation, any dispute during the audit on finding etc.) To follow the schedules informed and confirmed by back-office/ client. To maintain & protect assets of company – laptop and other accessories and any other. To submit Travel & Expenses (T&E) statements in timely manner. To adhere to terms and conditions agreed at the time of acceptance of appointment letter. Ready for frequent travel Ø Roles & Responsibilities for HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects Ø Criteria for Performance Evaluation (KPIs) Timely Report submission Quality Reporting of audits Customer feedback rating not less than 4.0 on a scale of 1 to 5 No customer complaint on behavioural issues & Avoid any situation conflict of interest Utilization rate as per Business Line expectations Timely and correct submission of the expenses billable to client. Qualification and up-gradation to other standards as identified and sector code qualification as applicable Adherence to environmental and safety policies of our organization The Job Description is subject to change from time to time, as per the requirements of the Company and the competencies / qualifications you may acquire in future Job Title: Lead Auditor Entity: Bureau Veritas India Pvt. Ltd, Location: As per Location Reports to (job): Head Of Certification Ø Purpose of Position The job incumbent is responsible to conduct value added audits of the clients against the requirement of the relevant standard. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy. Ø Major Responsibilities As a professional, carry out all activities related to profession in accordance with BV code of ethics and confidentiality requirements. To conduct audits in accordance with IATF rule requirement, Business Management System and BVC India Operations Manual. To keep self updated with latest regulatory requirements & technologies pertaining to sectors/ schemes under audit. To manage time effectively throughout entire audit cycle – From planning to reporting. In the role as auditor (team member), to cooperate and coordinate with audit team leader during the audit. In the role as lead auditor (team leader), manage the team in a effective manner. To report / inform reporting line / back-office / team leader for any unexpected situation faced during the audit. (Examples – less time available for audit against planned due to situations beyond control, audit cancellation, any dispute during the audit on finding etc.) To follow the schedules informed and confirmed by back-office/ client. To maintain & protect assets of company – laptop and other accessories and any other. To submit Travel & Expenses (T&E) statements in timely manner. To adhere to terms and conditions agreed at the time of acceptance of appointment letter. Ready for frequent travel Ø Roles & Responsibilities for HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects Ø Criteria for Performance Evaluation (KPIs) Timely Report submission Quality Reporting of audits Customer feedback rating not less than 4.0 on a scale of 1 to 5 No customer complaint on behavioural issues & Avoid any situation conflict of interest Utilization rate as per Business Line expectations Timely and correct submission of the expenses billable to client. Qualification and up-gradation to other standards as identified and sector code qualification as applicable Adherence to environmental and safety policies of our organization The Job Description is subject to change from time to time, as per the requirements of the Company and the competencies / qualifications you may acquire in future Show more Show less

Job Description Form Job Title : Surveyor Entity : Bureau Veritas India Pvt Ltd Location : Sricity, Chittor Dist., Andhra Pradesh Reports to (job) : Operations Manager Ø Purpose of Position Quality Inspector services for Cylinder inspections involves visually assessing, testing witness, and maintaining cylinders to ensure their safe and reliable use. This includes checking for external damage, internal corrosion, and ensuring compliance with safety standards and regulations. (10 Hrs shift) with NDT Level - II certification having around 10 years of experience in pressure vessels and pressure parts, flexible to work in night shift also (if required). The job incumbent is responsible for inspection in QA/QC field of IND business (Oil & Gas, Power, Chemical and Petrochemical Industries). The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy Ø Major Responsibilities Inspection of Pressure Vessels & components: (Cylinders, Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Ø Criteria for Performance Evaluation (KPIs) Time taken to deliver the report to the client Quality of report Inspection done in the allocated timeframe Client claims Detention ratio Customer satisfaction Share information, Best practice, Knowledge Management Quality of Work Number of surveys / inspections Compliance of internal and external guidelines, policies, procedures. Adherence to environmental and safety policies of our organization The Job Description is subject to change from time to time, as per the requirements of the Company and the competencies / qualifications you may acquire in future. Show more Show less

ØPurpose of Position The job incumbent is responsible to conduct audits of the clients against the requirement of the relevant standard. Many certified organisations having stand-alone certification are migrating towards integration of these. Hence it is expected that an auditor in audit team be qualified to all the schemes under integration. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy. Ø Major Responsibilities As a professional, carry out all activities related to profession in accordance with BV code of ethics and confidentiality requirements To conduct audits in accordance with ISO 19011, Bureau Veritas Management System and BVC India Operations Manual To keep self-updated with latest regulatory requirements & technologies pertaining to sectors/ schemes under audit To manage time effectively throughout entire audit cycle – From planning to reporting To cooperate and coordinate with audit team leader during the audit To report / inform reporting line / back-office / team leader for any unexpected situation faced during the audit. (Examples – less time available for audit against planned due to situations beyond control, audit cancellation, any dispute during the audit on finding etc.) To follow the schedules informed and confirmed by back-office/ client. To maintain & protect assets of company – laptop and other accessories and any other To adhere to terms and conditions agreed at the time of acceptance of appointment letter To coordinate with the technical function for ensuring audit, qualifications and reporting is followed in line with LTO. To support sales to pass on any business leads coming across industry. Ø Roles & Responsibilities For HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects ØCriteria for Performance Evaluation (KPIs) Professional development. Customer feedback rating not less than 4.0 on a scale of 1 to 5 No customer complaint on behavioural issues & Avoid any situation conflict of interest Adherence to environmental and safety policies of our organization Qualify for new standards, Improvement in competency (e.g tutor, 2P, 3P, etc ) Improve Performance on Soft grading Metrics Timely Defect Resolution Timely closure of NCRs Timely Reporting / Timeliness in marking of examination papers Timely submission of SF10 Timely and cost effective travel plans Utilization Rate Identifying the Sales opportunity Ø Qualification And Experience Science / Engineering Graduate / Post Graduate with minimum 6-8 yrs of industry experience with min. 2 yrs experience in conducting 2nd or 3rd party audits. Successfully completed a registered lead auditor course based on reference standard Knowledge of ISO 17021 & ISO 17065 requirements. Conversant with the terminology and the principles of the relevant standards ØSkills & Qualities: Interpersonal relationship and leadership skills Good Communication, Reporting, Presentation, Good listening Team Cohesion Time Management Be able to handle situations in judicious manner Pleasing Personality Computer Skill Show more Show less

Job Title: Lead Auditor – Integrated Management System Entity: Bureau Veritas India Pvt. Ltd. Location: Chennai Reports to (job): Certification Manager – Tamil Nadu. Ø Purpose of Position The job incumbent is responsible to conduct value added audits of the clients against the requirement of the relevant standard. Many certified organisations having stand-alone certification are migrating towards integration of these. Hence it is expected that an auditor in audit team be qualified to all the schemes under integration. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy. Ø Major Responsibilities As a professional, carry out all activities related to profession in accordance with BV code of ethics and confidentiality requirements To conduct audits in accordance with ISO 19011, Bureau Veritas Management System and BVC India Operations Manual To keep self updated with latest regulatory requirements & technologies pertaining to sectors/ schemes under audit To manage time effectively throughout entire audit cycle – From planning to reporting To cooperate and coordinate with audit team leader during the audit To report / inform reporting line / back-office / team leader for any unexpected situation faced during the audit. (Examples – less time available for audit against planned due to situations beyond control, audit cancellation, any dispute during the audit on finding etc.) To follow the schedules informed and confirmed by back-office/ client. To maintain & protect assets of company – laptop and other accessories and any other To submit Travel & Expenses (T&E) statements in timely manner To adhere to terms and conditions agreed at the time of acceptance of appointment letter Ready for frequent travel. Ø Roles & Responsibilities for HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects Ø Criteria for Performance Evaluation (KPIs) Timely Report submission Quality Reporting of audits Customer feedback rating not less than 4.0 on a scale of 1 to 5 No customer complaint on behavioural issues & Avoid any situation conflict of interest Utilization rate as per Business Line expectations Timely and correct submission of the expenses billable to client. Qualification and up-gradation to other standards as identified and sector code qualification as applicable Adherence to environmental and safety policies of our organization Ø Qualification and Experience Engineering or Science Graduate or Post graduate with min 4 years of work experience in large/medium size industry. Hands on experience of various activities like planning, production, QA/QC, maintenance, project management. Out of this, 2 years necessarily in the field of respective scheme (QMS, EMS, OHSAS) Auditing experience (first, second, third party) will be an added advantage. Skills & Qualities: Good Communication, Reporting, Presentation, Good listening Team Cohesion and Leadership qualities Time Management Be able to handle situations in judicious manner. Pleasing Personality The Job Description is subject to change from time to time, as per the requirements of the Company and the Competencies / qualifications you may acquire in future. Show more Show less

Long Description 1 Ø Purpose of Position Business Development for CTC Business line for all Product Line. The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy. Ø Major Responsibilities Business Development for all product portfolio for Construction & In-service Verification Business Lines – (Products – EIA, Geotech, Design Review, QA/QC, NDT-RR. HSE Audits & Training) Recognizing the prospective clients in the region, and create a data base. Early identification and follow up of major projects, opportunities & tenders. Identification, preparation and submission of pre-qualification, expression of interest, offers & tenders. Visiting prospective clients to present BV services and to identify the client need as an opportunity to BV, follow up actions and keeping the respective division heads in communication loop. Efficient in using the marketing tools such as presentation material, company profile, service sheets, reference list, completion/appreciation letters, etc. Keeping in touch with the various publicity activities in the region such as exhibitions, seminars, conferences etc. and explore the possibility of showcasing the organization and services. Interacting with the Product Mangers & BD managers of other regions for mutual exchange of expertise, work, common clients and other references. Long Description 2 Ø Roles & Responsibilities for HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects Ø Criteria for Performance Evaluation (KPIs) Sales, revenue & other financials as per business plan. Client relationship – Retention and Growth. Cost control Compliance of internal and external guidelines, policies, procedures. Internal and external customer service satisfaction (e.g. number of complaints) Development and management of human resources Ø Qualification And Experience Engineer with Management Degree with 10-15 years relevant experience. Ø Skills & Qualities: Excellent interpersonal skills & Good personal hygiene. Should have good computer & analytical skills Good communication Skills Long Description 3 Long Description 4 Show more Show less

0 Responsibility & Authority : 6.1 To assist HOD in documentation, implementation and maintenance of laboratory Quality, Health, Safety and Environment system as per ISO/IEC 17025, ISO 9001, ISO 14001 and ISO 45001 with BV internal requirements; To assist HOD in reporting the performance of Quality System to the management and arranging the management review meeting; 6.3 To assist HOD in creating, updating, protecting and implementation of SOPs, WINs, CPs, OCP’s, OI. s, LOP’s, formats, all level 4 documents; To assist HOD in assuring validity of results through repeatability/reproducibility of the tests, ILT/PT programs, IQC, control charts etc; Check for implementation of Location Document in CPS Doc; To HOD in recording of Corrective Action taken including root cause analysis and monitoring of effectiveness and documentation of the same; 6.7 To assist HOD in Test Method Control (ISO, AATCC, ASTM etc.) check for availability, Quotation receiving, indent raising & controlling; 6.8 Assist HOD in maintaining LTO’s with timely application submission and follow-up; 6.9 Must be able to disseminate best practices within the location; 6.10 Actively conduct the Safety tool box talks among the employees on regular basis; 6.11 Provide dedicated supervision / fire watch when hot-work, height work or other activity is taking place in the premises that could be hazardous especially by third party employees; 6.12 Apply and respect safety, health and environment requirement in daily activities; 6.13 Watch for potentially hazardous working conditions or work practices and report them to concern department as soon as possible; 6.14 Identify and communicate HSE risks; 6.15 Ensure all the HSE related checklist are up to date and is regularly filled by the concerned department; 6.16 Conduct routine safety inspection; 6.17 Watch for unsafe acts & unsafe conditions and arrange to prevent /mitigate it; 6.18 Ensure that adequate & proper types of Fire Extinguisher are available, maintained & ensure proper maintenance record; 6.19 Ensure the delivery and upgrade (as needed) of HSSE training programs to all employees; 6.20 Organize Fire drills, chemical drills etc. and retain records for Emergency Preparedness and Response; 6.21 Maintain records of required HSSE trainings & Certifications; 6.22 Review of permit to work. 6.23 Organizing and participation in global campaigns. 6.24 Ensuring that personnel are properly equipped with safety equipment; 6.25 Any other duties assigned by HOD. 7.0 HSE Responsibilities: All Employees 7.1 All employees must comply with Local Legal requirements as well as the applicable Group QHSSE Policies, Procedures and their requirements; 7.2 Employees are requested to communicate to their immediate Manager any unsafe work practices or condition and opportunities for improvement of HSSE practices; 7.3 Employees are responsible for their own personal safety and must make sure before undertaking any task that all conditions related to their safety are met and that the risk is nil according to their best judgment. must make sure according to their best judgment; 7.4 If any Employee wants to anonymously report an Ethic breach, an alert line has been set up by the Risk and Compliance Officer 0 Responsibility & Authority : 6.1 To assist HOD in documentation, implementation and maintenance of laboratory Quality, Health, Safety and Environment system as per ISO/IEC 17025, ISO 9001, ISO 14001 and ISO 45001 with BV internal requirements; To assist HOD in reporting the performance of Quality System to the management and arranging the management review meeting; 6.3 To assist HOD in creating, updating, protecting and implementation of SOPs, WINs, CPs, OCP’s, OI. s, LOP’s, formats, all level 4 documents; To assist HOD in assuring validity of results through repeatability/reproducibility of the tests, ILT/PT programs, IQC, control charts etc; Check for implementation of Location Document in CPS Doc; To HOD in recording of Corrective Action taken including root cause analysis and monitoring of effectiveness and documentation of the same; 6.7 To assist HOD in Test Method Control (ISO, AATCC, ASTM etc.) check for availability, Quotation receiving, indent raising & controlling; 6.8 Assist HOD in maintaining LTO’s with timely application submission and follow-up; 6.9 Must be able to disseminate best practices within the location; 6.10 Actively conduct the Safety tool box talks among the employees on regular basis; 6.11 Provide dedicated supervision / fire watch when hot-work, height work or other activity is taking place in the premises that could be hazardous especially by third party employees; 6.12 Apply and respect safety, health and environment requirement in daily activities; 6.13 Watch for potentially hazardous working conditions or work practices and report them to concern department as soon as possible; 6.14 Identify and communicate HSE risks; 6.15 Ensure all the HSE related checklist are up to date and is regularly filled by the concerned department; 6.16 Conduct routine safety inspection; 6.17 Watch for unsafe acts & unsafe conditions and arrange to prevent /mitigate it; 6.18 Ensure that adequate & proper types of Fire Extinguisher are available, maintained & ensure proper maintenance record; 6.19 Ensure the delivery and upgrade (as needed) of HSSE training programs to all employees; 6.20 Organize Fire drills, chemical drills etc. and retain records for Emergency Preparedness and Response; 6.21 Maintain records of required HSSE trainings & Certifications; 6.22 Review of permit to work. 6.23 Organizing and participation in global campaigns. 6.24 Ensuring that personnel are properly equipped with safety equipment; 6.25 Any other duties assigned by HOD. 7.0 HSE Responsibilities: All Employees 7.1 All employees must comply with Local Legal requirements as well as the applicable Group QHSSE Policies, Procedures and their requirements; 7.2 Employees are requested to communicate to their immediate Manager any unsafe work practices or condition and opportunities for improvement of HSSE practices; 7.3 Employees are responsible for their own personal safety and must make sure before undertaking any task that all conditions related to their safety are met and that the risk is nil according to their best judgment. must make sure according to their best judgment; 7.4 If any Employee wants to anonymously report an Ethic breach, an alert line has been set up by the Risk and Compliance Officer 1 ) Design and maintain the integrated HSE management system Follow-up and report HSE KPI’s to management Must be able to identify local high risk activities and ensure that processes are in place to protect employees Must be able to identify and disseminate best practices within the country Ensure that appropriate measure / Personal Protective Equipment is correctly identified, fit for purpose and correctly maintained for all laboratory or office activities. Support the laboratory or office maintain existing HSE programs (certified or not) Lead and coordinate internal and external audit programs Address specific reporting and records keeping requirements of BV Group / CPS, OHSAS 18001 and ISO 14001 requirements as well as other pertinent safety/regulatory compliance matters to ensure the laboratory or office is in compliance Actively participate in the scheduling of HSE meetings to review HSE performance and policies Prevention management Must be able to impart to staff incident risk management tools & techniques as needed Increase awareness of costs and risks of poor performance and non-compliance Periodic monitoring/verification of the application of safety procedures in the field by BV inspectors. Develop training modules 3 ) Maintain and improve HSE performance Implement HSE Policy (local or Corporate) Advise the local senior management team for compliance to respective country/state/local HSE regulatory requirements Implement Group Priorities, train and support management Complete analysis (complaints, accident) and propose corrective actions with management, Follow up. Track and report HSE performance to country management and to Regional HSE Manager. 4.0 Key Performance Indicators : HSE KPIs – safety performance, energy use minimization, paper consumption etc Review quality and effectiveness of internal HSE audits executed (completeness, correctness, timing, documentation, etc.) Accident analysis and action plan 5.0 Key Competencies : Goal oriented and motivated to meet set objectives and KPIs Strong conceptual and analytical thinking Must be proactive to provide/work solutions Must have strong time management and organizational skills to meet deadlines Must be able demonstrate Influence and leadership to lead the laboratory or office in HSE implementation and activities Management System implementation and behavioral change Leadership ability HSE Responsibilities : Apply and respect safety, health and environment requirement in daily activities Watch for potentially hazardous working conditions or work practices and report them to his or her supervisor (s) as soon as possible Show more Show less

Job Title: Analytical Chemist Backup To: Division/Section: CPS Report To: Manager Department: RSL Location: Noida Job Summary (Brief overview on the scope of job responsibility): Testing as per Protocol Testing as per Procedure Interrelationships (Other key functional or communicational lines): Communicate with Manager / Testing Team for Testing Job Responsibility & Accountability (Key Roles, functions & accountability): Collect training samples To help in inorganic/Inorganic sampling & testing To Assist sample extraction and sample Analysis Textile/leather sample extraction for different RSL parameter Having Knowledge of Instrument Analysis Sample preparation Testing as per Protocol Knowledge of inorganic/Organic chemistry Required Skills & Qualification :- Core skills: Interpersonal communication skill Self- motivated Time management Training skill Other skills: Independent Willing to help colleagues Integrity Continuous improvement Technical knowledge Qualifications: BSc./MSc in Chemistry Ability to read documents such as procedure manuals in English; At least 2 to 3 years' related experience. Knowledge of computer application in relevant software. Show more Show less

Major Responsibilities Third Party Inspection or QA/QC of Civil Projects on a continuous basis, Structures, Design, Lab Testing, Soil Investigation Adherence to Codes and Standards (Knowledge of Codes and Standards), Piling / Foundation, RCC Review of QAP & Quality Manual Supervision and execution of high-rise residential and commercial building construction Conduct regular inspections of construction activities, materials, and workmanship to ensure compliance with project specifications, standards, and regulatory requirements Ensure that all construction activities are carried out as per approved drawings and quality standards Maintain comprehensive records of inspections, test results, and corrective actions Prepare and submit quality reports to project managers and senior management Liaise with contractors and project teams to resolve quality-related issues Participate in site meetings and quality audits Qualification And Experience Graduate Engineer BE/ B.Tech (Civil) with min. 10 years or Diploma (Civil) with 12 years of relevant experience in residential and commercial high-rise building projects Roles & Responsibilities For HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects

Your career is about more than building a resume — it’s a chance to Leave Your Mark . Want to be a part of a fabulous team? As we continue to develop Marine & Offshore activities, we are delighted to offer a unique opportunity to join our organisation as Equipments & Material Certification (EMC) Surveyor for Marine & Offshore operations. Position is located within our Rajkot location in India and you will be welcomed in a supportive and collaborative learning environment. Purpose of Position Dedicated to surveys of materials & equipment for ships and offshore units and audits of the manufacturing facilities. Major Responsibilities Perform surveys, inspections of materials & equipment for ships and offshore units. Perform audits at the manufacturing sites. Generate comprehensive reports on survey/audit findings and issue certificates. Liaise with manufacturers regarding surveys & audits. Stay abreast of Bureau Veritas (BV) rules, industry developments, regulations, and best practices relevant to marine and offshore materials and equipment. Relative technical working instructions issued from Head Office Marine & Offshore Division, such as procedures, technical or local requirements are to be used as instruction. Refer to Bureau Veritas (BV) Rules, standards, regulations, specifications and relevant approved drawings as technical guidance to perform jobs. Ensures stamps, tools and notebooks are to be used in accordance with the provisions of working instruction. Report to the manager for any claim or complaint received from clients. Qualification And Experience Hold a BE or equivalent in Naval Architecture/Mechanical Engineering or equivalent certification 2-5 years experience. Experience in materials and equipment surveying within the maritime and offshore industry or foundry. In-depth knowledge of maritime regulations, classification society requirements, and industry best practices.. Previous experience with shipyard, marine & offshore projects or foundry will be considered as an advantage. Ability to acquire new skills/ knowledge. Have good communication skills in English, team spirit and ability to work with minimum supervision. SHAPING A WORLD OF TRUST - WHAT WE VALUE AT BV Join us to share our passion for the maritime world! We create trust between businesses and we are committed to cultivating an open and inclusive environment wherever we operate and so do our employees. Being part of the Bureau Veritas family is more than just working, it’s being convinced that you will leave your mark…. in shaping a world of trust. We are committed to our Absolutes: Safety, Ethics, and Financial Control. Our Values—Trusted, Responsible, Ambitious & Humble, Open & Inclusive—are at the core of everything we do.

The position of Business Development for Building & Infrastructure Business line for all Product Line requires you to perform in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy. Your main responsibilities will include developing business for all product portfolios for Construction & In-service Verification Business Lines such as EIA, Geotech, Design Review, QA/QC, NDT-RR, HSE Audits & Training. You will be responsible for identifying prospective clients in the region, creating a database, and following up on major projects, opportunities, and tenders. Additionally, you will be involved in preparing and submitting pre-qualification, expression of interest, offers & tenders, as well as visiting prospective clients to present BV services and identify client needs. It is crucial to efficiently use marketing tools and stay updated on various publicity activities in the region. Your performance will be evaluated based on sales, revenue, client relationship retention and growth, cost control, compliance, customer service satisfaction, and human resource development. The ideal candidate should have a BE/B.Tech/Dip in Civil with a preference for a Post Graduation in Marketing. You should have more than 2 years of experience in sales & marketing related to Construction, Building material, NDT, or Geotechnical fields. To excel in this role, you should possess a Go to Market attitude with the ability to connect with people, establish client contacts at a higher level, and convert contacts into business. Excellent communication and presentation skills, a positive attitude, self-motivation, interpersonal skills, a pleasing personality, and leadership qualities are essential for success in this position.,