MosChip Semiconductor Technology Limited

Experience in Logic design / RTL coding is a must. Experience is SoC design and integration for complex SoCs is a must. Experience in Verilog/System-Verilog is a must. Experience in Multi Clock designs, Asynchronous interface is a must. Experience in using the tools in ASIC development such as Lint and CDC. Experience in Synthesis / Understanding of timing concepts is a plus. Experience in ECO fixes and formal verification. Should have knowledge of AMBA protocols - AXI, AHB, APB, SoC clocking/reset architecture. Excellent oral and written communications skills. Proactive, creative, curious, motivated to learn and contribute with good collaboration skills Role: Design Verification Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Hardware & Networks Employment Type: Full Time, Permanent Role Category: Hardware Education UG: Any Graduate PG: Any Postgraduate

include optimization for DSP, developing/enhancing the framework/drivers for new use cases, drivers for audio interfaces, drive design discussions across teams, SW maintenance. Requirements Experience on any DSP/Embedded processor with proficiency in C/C++ programming, computer architecture, operating systems, and some of the below areas: Audio Domain Knowledge with Android or Embedded Linux is preferred. Strong software debugging skills in real time operating systems, preferably on DSP platforms. Audio use cases (e.g., playback, recording and streaming, etc.). Voice use cases (e.g., CS and PS calls). Optimization for MIPS, Memory Audio/speech pre/post processing (e.g., Echo cancellation, Noise suppression, Audio Effects) Audio/speech compression standards (e.g., MP3, AAC, FLAC, AMR, EVS, etc.). Expertise in working with tools and techniques used on DSP platforms (e.g., Trace32, JTAG, etc.). Audio Interfaces like PCM, I2S, HDMI, SPDIF Audio Device Drivers Development Engineer Job Description include optimization for DSP, developing/enhancing the framework/drivers for new use cases, drivers for audio interfaces, drive design discussions across teams, SW maintenance. Requirements Experience on any DSP/Embedded processor with proficiency in C/C++ programming, computer architecture, operating systems, and some of the below areas: Audio Domain Knowledge with Android or Embedded Linux is preferred. Strong software debugging skills in real time operating systems, preferably on DSP platforms. Audio use cases (e.g., playback, recording and streaming, etc.). Voice use cases (e.g., CS and PS calls). Optimization for MIPS, Memory Audio/speech pre/post processing (e.g., Echo cancellation, Noise suppression, Audio Effects) Audio/speech compression standards (e.g., MP3, AAC, FLAC, AMR, EVS, etc.). Expertise in working with tools and techniques used on DSP platforms (e.g., Trace32, JTAG, etc.). Audio Interfaces like PCM, I2S, HDMI, SPDIF Role: Post Silicon Test Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Software & QA Employment Type: Full Time, Permanent Role Category: Quality Assurance and Testing Education UG: Any Graduate PG: Any Postgraduate

Required Skills : Excellent skills in C Programming & debugging skills in an embedded environment Hands on experience on WLAN/Wi-Fi &TCP/IP, HTTP(S), ICMP, DHCP protocol stacks. Good knowledge of current Wi-Fi systems and standards including 802.11a, b, g, n, any additional knowledge of 802.11ac is a plus. Experience with Wireless/Network Security protocols. Enterprise Security testing (security:802.1x, Radius Authentication, WPA2, WPA3 etc) Good experience on Firmware, Android And Linux Wi-Fi stack and framework Knowledge of Wi-Fi sniffers and related tools Ex: Wireshark, Omni peek Experience in handling logic analysers, CRO, spectrum analyser, power meter, network analysers. Scripting experience like python/shell is an added advantage. Familiarity with SDLC and typical processes for development and testing, release management. Experience in usage of tools for development, testing, bug tracking, config management, build etc. Excellent communication and documentation skills Education Requirements: B. Tech / M. Tech (ECE / CSE) Shift: General Work Week: Monday to Friday Role: System Administrator / Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Hardware & Networks Employment Type: Full Time, Permanent Role Category: IT Network Education UG: B.Tech/B.E. in Any Specialization PG: M.Tech in Any Specialization

Should have 1-3 years of experience, young enthusiast who is looking to build his career in business development for the US, Europe & APAC region. Market & Account Research: Conduct in-depth research on target accounts, identifying key stakeholders and penetration strategies Lead Generation & Email Campaigns: Continue managing data mining, lead generation, and email outreach to drive engagement and conversions Report Preparation: Generate detailed mapping and org chart reports to identify strategic decision-making Maintain and expand your database of prospects within your assigned territory Hands on experience on platforms like Zoom Info and LinkedIn Sales Navigator Hands on experience on Microsoft excel and Microsoft power point Routing qualified opportunities to the appropriate sales executives for further development Monitor and trace leads transferred to account manager Marketing events support to identify and follow up the leads from the events Ability to thrive in a fast-paced, team-oriented environment Excellent Written and verbal communication Role: Business Development Executive (BDE) Industry Type: Electronic Components / Semiconductors Department: Sales & Business Development Employment Type: Full Time, Permanent Role Category: BD / Pre Sales Education UG: B.Tech/B.E. in Any Specialization PG: MBA/PGDM in Any Specialization

Minimum of ten years of hands-on Test Development experience (DFT, EDA tools, etc..) Solid knowledge & experience in defining test solutions for multi-million gate SOC (Scan & MBIST) with Mixed Signal IPs (PLL, High Speed SERDES, DDR) Knowledgeable in full SOC design and manufacturing cycle with specialized/direct experience in multiple areas; RTL/Custom Logic design, Synthesis, P&R, STA, Integration, Verification, Characterization and ATE test Strong understanding of relationships between Hardware, Firmware and Software in FPGA and/or multi-processors SOC. Past experience in leading the team to successful silicon bring-up and problem solving in a complex system Strong planning, project, and people management skills required. Must have experience developing managers and individual contributors Experienced hands-on technical manager not afraid to dig into details to provide technical direction Proven track record of delivering results and meeting quality, cost, and time-to-market objectives Ability to collaborate with overseas colleagues to define strategy, plan, and execute across the larger, global organization Stakeholder influencing and people skills must be excellent. Needs to be able to set aggressive goals and manage risks effectively Must have a thorough understanding of tool development methodology. Ability to manage software development tasks associated with specifying, developing, scheduling, and debugging according to current and future tool requirements. Role: Product Design Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Hardware & Networks Employment Type: Full Time, Permanent Role Category: Hardware Education UG: Any Graduate PG: Any Postgraduate

Responsibilities include optimization for DSP, developing/enhancing the framework/drivers for new use cases, drivers for audio interfaces, drive design discussions across teams, SW maintenance. Requirements Very good C programming and Linux skills. Good understanding of Linux OS concepts and Linux Kernel internals. Good system debugging skills and root cause analysis. Working knowledge of any of the peripheral Linux drivers areas such as: USB, PCIe, HSIC, etc., DWC, USB Gadget drivers, Android USB drivers, USB host controller drivers. Excellent Linux kernel debugging skills with ability to Find the exact root cause. Good knowledge of Git/Perforce. Candidate should be familiar in understanding the peripheral hardware, Device Data sheets, Schematics, Specification and Reference manual. Should be a good team-player and easy to work with various stake holders. Some experience with Qualcomm chipset code, drivers, tools usage and system design. Preferably good understanding about ARM32/64 chipset architecture. Good understanding of communication protocols (SPI, I2C, UART), Audio interface (I2S, ADC/DAC) Working experience in Automotive/Telematics BSP areas would be preferred Linux Device Driver Development Engineer Job Description Responsibilities Responsibilities include optimization for DSP, developing/enhancing the framework/drivers for new use cases, drivers for audio interfaces, drive design discussions across teams, SW maintenance. Requirements Very good C programming and Linux skills. Good understanding of Linux OS concepts and Linux Kernel internals. Good system debugging skills and root cause analysis. Working knowledge of any of the peripheral Linux drivers areas such as: USB, PCIe, HSIC, etc., DWC, USB Gadget drivers, Android USB drivers, USB host controller drivers. Excellent Linux kernel debugging skills with ability to Find the exact root cause. Good knowledge of Git/Perforce. Candidate should be familiar in understanding the peripheral hardware, Device Data sheets, Schematics, Specification and Reference manual. Should be a good team-player and easy to work with various stake holders. Some experience with Qualcomm chipset code, drivers, tools usage and system design. Preferably good understanding about ARM32/64 chipset architecture. Good understanding of communication protocols (SPI, I2C, UART), Audio interface (I2S, ADC/DAC) Working experience in Automotive/Telematics BSP areas would be preferred Role: Post Silicon Test Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Software & QA Employment Type: Full Time, Permanent Role Category: Quality Assurance and Testing Education UG: Any Graduate PG: Any Postgraduate

Job description BT Audio Development Engineer Requirements Design and development experience in BT stack profile development, knowledge of RFCOMM, L2CAP, HFP, AVRCP, and other BT profiles and exposure of various Bluetooth profile development. Proven experience of Classic Bluetooth (BR-EDR) and Bluetooth Low Energy (BLE) and excellent knowledge of Audio, SPP, HID profiles, GATT based profiles, L2CAP, HCI, LMP Understanding BT stack Exposure to BT stack, worked on enhancements to Bluetooth stacks and profiles like A2DP, AVRCP, HFP, HSP, PBAP and MAP. Thorough understanding of Bluetooth core and profile specifications. Experience in Bluetooth stack design and Android software components. (e.g., Profile stack, HCI interface, Transport driver, Bluetooth SCO etc.) Exposure to at least one of the stacks like BlueZ Bluedroid. Bluetooth engineer with good coding and debugging skills should be able to independently fix bugs Should be capable of working on embedded hardware and understand concepts in debugging it if any issues. Bluetooth classic/LE protocol stack, A2DP, HFP, AVRCP, BTLE, PBAP, SPP, HCI, OPP, SDP, RFCOMM Experience in Bluetooth stack design and Android software components. (e.g. Profile stack, HCI interface, Transport driver, Bluetooth SCO etc.) Experience on Bluetooth Audio module along with Audio Codec Exposure to development and debugging tools including (HCI snoop log, Air sniffer like Frontline and Ellisys, Klocwork) Experience on Bluetooth profile stack and core stack development skills for Qualcomm, Broadcom, Marvel or MediaTek Bluetooth stack or same level of experience with transport kernel development experience, Linux development Strong expertise in at least one programming language (C, C++, Java) along with working knowledge in Android Operating system. Role: Post Silicon Test Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Software & QA Employment Type: Full Time, Permanent Role Category: Quality Assurance and Testing Education UG: B.Tech/B.E. in Any Specialization PG: Any Postgraduate

Requirements Must have experience in leading client projects Must be good at Honouring Committed Schedules, Quality Delivery, Clarity in Communication Must have full command over major blocks of Serdes like Tx or Rx Must be good at understanding the CAD flow environment of Clients Must be able to guide Layout team to fix the simulation related issues Must be able to work with PD team to integrate the AMS blocks Must have good understanding about the importance of PPA goals and must have ideas to achieve them Debug functional and performance simulations Must be able to understand all QA check process of the client Must have command over generation of all relevant design views using sign-off tools Role: Design Engineer Industry Type: Electronic Components / Semiconductors Department: Production , Manufacturing & Engineering Employment Type: Full Time, Permanent Role Category: Engineering Education UG: B.Tech/B.E. in Any Specialization PG: Any Postgraduate

Job description Looking for PCB layout design Engineer with the following requirements: Hands-on experience in complex, high-density, high-speed PCBs, Analog, Digital, RF, mixed-signal PCB layout design. Exposure with complex 2U, 3U server form factor-based PCB designs. Hands-on experience with High-speed interfaces like DDR3,DDR4/5, LPDDR, , PROCESSORS, FPGA, PCIE, USB, SATA, MIL-1553, ADC, DAC, ETHERNET, NAND & NOR FLASH, SD, RS-422, BLUETOOTH 4.0, WIFI, GPS, GSM etc. Hands on Complex layout HDI designs with multiple BGAs and Multiple Fine pitch BGA (0.8mm and 0.5mm) of high pin count (2084 pins). Library creation as per IPC 7351 standard. Electrical Constraints setup for high-speed modules to match its requirement (Length match, impedance, delay tuning requirements) Experience in Power supply layout design types: AC to DC, DC to DC converters and SMPS. Creation of file type conversions from PCB to DXF, IDF, Step file collaboration with Mechanical Engineer. Power supply layout designs & its critical requirements to meet stringent isolations. Gerber validation and generations of final deliverables for DFM. Working experience on Gerber viewers using Cam350, ODB++ viewer. Collaborating with multiple functional teams like design, SI/PI, mechanical, DFM, DFA etc. in a product development environment knowledge on Power dc, Thermal design, simulation and analysis knowledge of OrCAD schematic Design Tool Collaboration with cross functional teams: Software, Electrical, Mechanical and PCB CAD teams Hands-on experience with Cadence Allegro/Altium EDA/PADS tools is essential. Education Requirements: B. Tech/B.E./M. Tech./M.E. Shift: 9:30 AM to 6:30 PM Work Mode: Office (Monday to Friday) Role: Hardware - Other Industry Type: Electronic Components / Semiconductors Department: Engineering - Hardware & Networks Employment Type: Full Time, Permanent Role Category: Hardware Education UG: B.Tech/B.E. in Any Specialization PG: M.Tech in Any Specialization

Job description Requirements Must have experience in working with MNC clients Must be good at Honouring Committed Schedules, Quality delivery, Clarity in Communication Familiarity with Serdes components like serializer or de-serializer circuits Strong fundamentals and knowledge of AMS design flow Must have familiarity with layout issues, working with layout team to fix them Must be good at preparing the Review PPT, run through the review meeting and closing all action items Must ensure the design meets PPA goals Good at debugging to ensure meeting all performance simulation issues Must be able to pass QA checks as demanded by the client Must be able to generate all relevant design views using sign-off tools Role: Post Silicon Test Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Software & QA Employment Type: Full Time, Permanent Role Category: Quality Assurance and Testing Education UG: B.Tech/B.E. in Any Specialization PG: Any Postgraduate

Required Skills : Strong understanding of BSP and platform software. Proficient in BSP Test scripting and programming languages (e.g., Python, C/C++). Experience with test automation frameworks and tools. Experience with Git, Jira tools. Knowledge of hardware-software integration and debugging. Familiarity with embedded operating systems (e.g., Linux, RTOS). Understanding of hardware interfaces and protocols (e.g., I2C, SPI, UART, PCIe,USB). Experience with continuous integration/continuous deployment (CI/CD) systems. Knowledge of security testing and secure boot processes. Experience with open-source testing tools and frameworks. Familiarity with Agile development methodologies. Knowledge of ARM Multicore Platforms Education Requirements. Tech / M. Tech (ECE / CSE / IT) Experience: 4 to 6 Years Shift: General Work Week: Monday to Friday Role: Post Silicon Test Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Software & QA Employment Type: Full Time, Permanent Role Category: Quality Assurance and Testing Education UG: Any Graduate PG: M.Tech in Any Specialization

Requirements Experience in using automation core APIs, building test cases, and validating it on a target device. Good knowledge in programming using any scripting languages [Perl/Python/Ruby] Good knowledge on SQL. MySQL and databases. Good knowledge in Tools/Automation development - C/C++, Python/Django, Database Familiarity with smartphone development environment (e.g., Android SDK) is a plus. Ability to work on Windows and Linux environments Experience in working with Mobile Development Platforms and tools is added advantage Role: Blockchain Quality Assurance Engineer Industry Type: Electronic Components / Semiconductors Department: Engineering - Software & QA Employment Type: Full Time, Permanent Role Category: Quality Assurance and Testing Education UG: Any Graduate PG: Any Postgraduate