Responsibilities - Develop detailed and accurate 3D models of MEP systems using Revit or other relevant BIM softwareDevelop and maintain families for MEPPerform detailed clash detection, specifically focusing on pipe routing conflicts with other building systems (structural, architectural, electrical) and resolve those conflictsReview vendor submittals and integrate equipment models into the BIM models.Extraction of quality 2D drawings from the BIM modelResponsible for develop 2D drawings from 3D ModelPrepare and generate detailed construction drawings, sections, elevations, schedules, and other relevant documentation from the BIM model.Responsible for 3D Model Coordination & QualityEnsure models are consistent with project standards, design criteria, local codes and standards, and adhere to company BIM protocols.Collaborate with engineers and designers to incorporate design changes and ensure model accuracy.Conduct clash detection analysis to identify and resolve conflicts between structural, civil, architectural, and MEP systems.Coordinate with other disciplines (e.g., architects, MEP engineers) to integrate models and ensure project coordination.Assist in quantity takeoffs and material estimations.Stay current with industry trends, emerging technologies, and software advancements related to BIM and structural engineering.
Company Description Meinhardt EPCM (India) Private Limited, a subsidiary of Meinhardt (Singapore) Pte. Ltd., is a leading engineering consultant with a focus on sustainable solutions for complex projects across various sectors. Established in 2016, we offer a range of services from feasibility study to project management in industries such as Oil & Gas, Urban Planning, Technology Parks, Energy, and more. Our goal is to be the preferred infrastructure and urban solutions partner globally. Role Description This is a full-time on-site role for a Fire Fighting Engineer located in Vadodara. The Fire Fighting Engineer will be responsible for implementing fire protection engineering solutions, ensuring life safety compliance, evaluating fire safety measures, designing fire suppression systems, and conducting safety engineering assessments. Qualifications Fire Protection Engineering and Fire Suppression Systems skills Life Safety and Fire Safety expertise Experience in Safety Engineering Knowledge of fire safety regulations and standards Strong analytical and problem-solving skills Excellent communication and team collaboration abilities Bachelor's degree in Fire Protection Engineering or related field Certifications in Fire Safety or Safety Engineering are a plus Show more Show less
The candidate should have relevant experience in planning and scheduling the various construction activities of industrial projects involving various contractors like – civil, PEB structural, Mechanical, piping, utility, firefighting, electrical, ELV systems and automation systems The candidate should be able to assess the predecessor and successor for each activity Candidate should be able to prepare L5 level schedule, loaded & mapped with the resources for each activity Candidate should be able to integrate the schedule given by the various contractors into the overall master schedule Able to work with both MS- Project and Primavera P6 The roles and responsibilities shall include, but not limited to, the following: Construction Management: Preparation of daily progress report (package wise), weekly progress report, monthly progress report (for both physical progress and financial progress) Give atleast 3 weeks look ahead schedule to the various discipline engineers Able to understand the productivity of the resources and arrive at the duration required for each activity Monitoring and tracking the schedule Daily / weekly updation of the schedule based on the progress Ensure the activities in critical path are completed as per schedule and raise an alarm / intimate the stakeholders for any delay with mitigation measures Participating in all the meetings at site and preparation , circulation of Minutes of Meetings (MOM) Tracking the pending actions against the MOM and intimating it to the contractors Overall schedule management of the project Preparation of progress measurement sheet with coordination with contractors Preparation of S-Curve Arranging meeting with the contractors wherever required Show more Show less
This role will be deputed from Bangalore to Oman location and is a full time opportunity. Key Responsibilities: •Develop and maintain detailed project schedules using Primavera P6 for engineering, procurement, and construction activities. •Coordinate with project teams, contractors, and stakeholders to integrate schedules and ensure alignment with project objectives. •Conduct regular schedule reviews, updates, and risk analysis to identify potential delays and propose corrective actions. •Track project progress, generate reports, and provide insights for decision-making based on schedule trends and variances. •Ensure compliance with project timelines, contractual requirements, and industry best practices. •Support project controls team with scheduling inputs for cost forecasting and resource planning. •Facilitate coordination between engineering, procurement, and construction teams to optimize project schedules. Show more Show less
Job Responsibilities: Experience in drafting for Steel Plants, Metals & Mineral sector, Power Plants, Plant Buildings, Hydrocarbon, and General Industrial projects . Capable of preparing design and construction deliverables such as: Block Diagrams Schematics PFDs & P&IDs General Arrangement Drawings (Ducting, Equipment, Piping) Equipment Layouts & Plant Layouts Fabrication Drawings Bill of Materials (BOM) Isometric Drawings As-Built Drawings Proficient in 2D CAD (AutoCAD) ; working knowledge of 3D CAD tools (e.g., Revit, Navisworks, SolidWorks, or similar). Ability to follow drawing guidelines and produce high-quality, error-free drawings . Capable of integrating assigned drawings by coordinating with Architectural, Civil, Structural, and Electrical disciplines under guidance. Show more Show less
Educational Qualification – B.E./B.Tech / M.E./M.Tech - Chemical Engg / Mechanical Engg Job Location – Bangalore Experience – 8-12 yrs Preferred industry – Design & Engg / EPC / EPCM organization or from Project team of process industry from MINERALS & METALS / SEMICONDUCTOR / PHARMA / FMCG sector Brief Job Description – Shall be able to perform / develop the following: - Process Flow Diagram (PFD); Piping & Instrumentation Diagram (P&ID) - Process Calculations; Equipment sizing calculations - Mass and water balance; Heat and Energy balance - Equipment list; Equipment specifications and datasheets - Utility requirements - Design basis reports - Preparation of mechanical General Arrangement Drawings / Shop layouts - Basic Engineering and Detailed Engineering related to process and technologies. - Process control requirements - Preparation of Technical specification, vendor offer review and vendor offer technical evaluation report for various bid packages. - To interface with the Client / core technology supplier / process licensor / critical process equipment Supplier (OEMs) to map the battery limits for various disciplines like utilities, MEP, civil, structural, architectural etc. - To compare various technologies available in the market and select the optimum technology from the viewpoint of CAPEX / OPEX considerations & value engineering Key Skills required - Good understanding about the role of various disciplines like civil& structural, piping, mechanical, electrical & instrumentation in overall project - To guide and coordinate with cross functional multidisciplinary team (civil& structural, piping, mechanical, electrical & instrumentation) on the process requirements. - Good understanding of project management, project cost estimates - Should have worked in at one project which had undergone a full cycle from concept to commissioning (desirable) - Working fluency in AutoCAD - Fluency in simulation software (desirable)
Role Description This is a full-time on-site role for a Revit BIM Piping Modeler, located in Surat. The role involves creating and managing detailed mechanical, electrical, and plumbing (MEP) models using Revit. Daily tasks include collaborating with architects and engineers to produce construction drawings, performing quality checks on models, and ensuring compliance with industry standards. The modeler will also be responsible for updating and maintaining BIM data throughout the project lifecycle. Experience Revit Modelling experience of 5 - 6 years preferably in Plant piping and building / factories. Qualifications Proficiency in Building Information Modeling (BIM) Experience with Mechanical, Electrical, and Plumbing (MEP) systems Familiarity with Architecture and Construction Drawings Excellent teamwork and communication skills Strong attention to detail and problem-solving skills Relevant certifications in BIM or MEP are beneficial Familiar with Part family loading, importing and creation of assembly Pump and piping fundamentals, Support creation in Revit Having collaborative work experience with different disciplines Clash detection and resolution in Navisworks manage Should have knowledge on engineering drawing management.
• Prepare Schematic Layout, Detail Layout for medium to large scale Projects related to Industrial domain. • Good knowledge of Authority guidelines like set back distance, road width, built up area ratio and suitably incorporate in Design deliverables. • Early design review, authority compliances and constructability analysis, can guide BIM modelers for model development. • Develop ideas focusing Client’s needs, building’s usage and environmental impact • Good knowledge of sustainability standards and LEED/IGBC/Griha certification requirements is preferred. • Ensure that all works are carried out to specific standards, building codes, guidelines and regulations • Draft designs that reflect green building values and cater to our clients’ desires for smaller carbon footprints • Interdepartmental Coordination and interference check between various disciplines. • Manage / Update BIM Project Documents. • Review drawings and 3D Models. • Can understand action items discussed in project review meetings for model development and detail engineering. • Responsible for development of 3D model and guide for extraction of IFC drawings inline with the project schedule. • Preparation of BOQ and selection of Materials like floor finishes, wall finishes, door / window / rolling shutter type etc & Tender documentation support • Addressing site quires and facilitate construction by applying BIM and CAD technologies in the design phase. • Travelling to client office and project site for meetings, workshops and briefing session. • Design and develop feasibility and schematic plans, 3D models and presentations for projects.
Key Responsibilities: •Develop and maintain detailed project schedules using MS Project/ Primavera P6 for engineering, procurement, and construction activities. •Coordinate with project teams, contractors, and stakeholders to integrate schedules and ensure alignment with project objectives. •Conduct regular schedule reviews, updates, and risk analysis to identify potential delays and propose corrective actions. •Track project progress, generate reports, and provide insights for decision-making based on schedule trends and variances. •Ensure compliance with project timelines, contractual requirements, and industry best practices. •Support project controls team with scheduling inputs for cost forecasting and resource planning. •Facilitate coordination between engineering, procurement, and construction teams to optimize project schedules.
You will be responsible for preparing Schematic Layout and Detail Layout for medium to large scale Projects in the Industrial domain. It is essential to have a good understanding of Authority guidelines such as set back distance, road width, built-up area ratio, and to incorporate them appropriately in Design deliverables. You will conduct early design reviews, ensure authority compliances, and perform constructability analysis. Furthermore, you will guide BIM modelers in model development. Your role will involve developing innovative ideas that align with Clients" needs, buildings" usage, and environmental impact. Preferred qualifications include a good knowledge of sustainability standards and certification requirements such as LEED/IGBC/Griha. You will ensure that all work is executed according to specific standards, building codes, guidelines, and regulations, with a focus on reflecting green building values and meeting clients" desires for smaller carbon footprints. Interdepartmental Coordination and interference checks between various disciplines will be part of your responsibilities. You will manage and update BIM Project Documents, review drawings and 3D Models, and understand action items discussed in project review meetings for model development and detail engineering. You will be accountable for the development of 3D models, guiding the extraction of IFC drawings in line with project schedules. In addition, you will be involved in the preparation of Bill of Quantities, selection of materials, and providing Tender documentation support. Addressing site queries and facilitating construction by applying BIM and CAD technologies in the design phase will be crucial aspects of your role. You may need to travel to client offices and project sites for meetings, workshops, and briefing sessions. Your tasks will also include designing and developing feasibility and schematic plans, 3D models, and presentations for projects.,
As a Project Scheduler, your main responsibility will be to develop and maintain detailed project schedules using MS Project/Primavera P6 for engineering, procurement, and construction activities. You will work closely with project teams, contractors, and stakeholders to integrate schedules and ensure alignment with project objectives. Conducting regular schedule reviews, updates, and risk analysis will be crucial to identify potential delays and propose corrective actions. Tracking project progress, generating reports, and providing insights for decision-making based on schedule trends and variances will also be part of your role. It will be important for you to ensure compliance with project timelines, contractual requirements, and industry best practices. Additionally, you will support the project controls team by providing scheduling inputs for cost forecasting and resource planning. Facilitating coordination between engineering, procurement, and construction teams to optimize project schedules will be essential for successful project delivery. Your role will involve close collaboration with various stakeholders to ensure efficient project execution and timely completion.,
Required industrial background – Design & Engg / EPC / EPCM organization or from Project team of process industry Preferred sector – Minerals & Metals / Semiconductor / Food & Beverages / Chemical / Petrochemical Brief Job Description: Shall be able to perform / develop the following: - Process Flow Diagram (PFD); Basic Piping & Instrumentation Diagram (P&ID) - Process Calculations; Equipment sizing calculations - Mass and water balance; Heat and Energy balance - Equipment list; Equipment specifications and datasheets - Utility requirements (Compressed Air, Chilled/Cooling/Process water circuit, Gas systems, - Design basis reports - Equipment / facilities / building layouts & General Arrangement Drawings - Basic Engineering and Detailed Engineering related to process and technologies. - Process control requirements - Familiar with sizing and calculation related to Slurry piping - Preparation of Technical specification, vendor offer review and vendor offer technical evaluation report for various bid packages. - To interface with the Client / technology supplier / process licensor / critical process equipment Supplier (OEMs) to map the battery limits for various disciplines like utilities, MEP, civil, structural, architectural etc. - To compare various technologies available in the market and select the optimum technology from the viewpoint of CAPEX / OPEX considerations & value engineering Key Skills required - Good understanding about the role of various disciplines like civil & structural, piping, mechanical, electrical & instrumentation in overall project - To guide and coordinate with cross functional multidisciplinary team (civil& structural, piping, mechanical, electrical & instrumentation) on the process requirements. - Good understanding of project management, project cost estimates - Should have worked in at one project which had undergone a full cycle from concept to commissioning - Working fluency in AutoCAD - Preparation of smart P&ID in Autoplant 3D (desirable) - Fluency in simulation software (desirable)
Proficient in Piping Design and Code calculations Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and procedures within the planned schedule Prepare detailed design calculations and analyses including design reports and procedures Understanding of Mechanical Engineering principles Experience in Oil and Gas, Refinery, Petrochemical, Building & Factories or Semiconductor sector Ability to visit and work on plant site Excellent problem-solving and analytical skills Excellent Drafting skills in AutoCAD, Software knowledge of Auto plant 3D and CAESAR || will be added advantage Excellent knowledge on Codes and Standards ASME, ASTM, IBR, PESO, DIN, JIS, EN, etc. Primarily worked in EPC or EPCM scenario and Experience of design deliverables flow chart Interface with other departments to obtain input for engineering and design Take Participation in client meeting, model review meeting, inter department meetings. Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Support, Piping Material Engineering, and MTO activities and deliverables Committed to Meinhardt values Strong communication and collaboration skills Flexible Business Travel
You should be proficient in Piping Design and Code calculations with the ability to perform conceptual, FEED, or detailed design analysis in accordance with project Scope of Work design basis, project documentation, design codes, and standards. Your responsibilities will include preparing detailed design calculations and analyses, design reports, and procedures. An understanding of Mechanical Engineering principles is essential. Experience in sectors such as Oil and Gas, Refinery, Petrochemical, Building & Factories, or Semiconductor will be beneficial. You should be willing to visit and work on plant sites as required. Strong problem-solving and analytical skills are necessary for this role. Proficiency in AutoCAD drafting is required, and knowledge of software such as Auto plant 3D and CAESAR || will be an added advantage. A solid understanding of Codes and Standards such as ASME, ASTM, IBR, PESO, DIN, JIS, EN, etc., is expected. Ideally, you should have worked in EPC or EPCM scenarios and have experience with design deliverables flow charts. Collaboration with other departments to gather input for engineering and design is essential. Participation in client meetings, model review meetings, and inter-departmental meetings is also part of the role. You should be well-versed in all Piping Sub-Disciplines, including Design and Modeling, Pipe Support, Piping Material Engineering, and MTO activities and deliverables. A commitment to Meinhardt values, strong communication skills, and the ability to collaborate effectively are important qualities for this position. Flexibility for business travel is required.,
We’re Hiring! Meinhardt EPCM India is seeking dynamic and detail-oriented professionals for the position of MEP – Quantity Surveyor . If you're passionate and have the relevant experience please do drop in your resumes. Position: MEP – Quantity Surveyor Experience: 3 to 6 Years Location: Bangalore Eligibility Criteria: 👨🎓 Educational Qualification: B.E / B.Tech in Mechanical or Electrical Engineering (preferred) 📊 Experience: Minimum 2 to 4 years of QS/ Project Estimation function in Industrial projects, Infrastructure, Buildings etc Main Job Tasks and Responsibilities Able to prepare BOQ based on drawings & specification, check and review BOQ Well verse with all Documents, like Technical Specification, Standards, Scope of works, Construction Drawings, Tendering, RFQ, Material properties, Work methodology, Construction sequencing etc Define project tasks, generate detailed measurements backup for Bill of Quantities and estimates Develop basic calculations for estimates, Auto Cad skills for quantity take off, generate the actual Material requirement Should have good knowledge of Market rates and vendor contacts to get the up to date pricing and to prepare accurate Cost estimate considering complete scope with high accuracy Coordinate with commercial/ Procurement team for the ordering/ placing the purchase order. Floating enquiries to vendors & contractors for pricing the MEP services works for estimation, budgeting and procurement. You should have hand on experience in billing, measurement, certifications and other Pre Contract & post contract QS works. Shall work with other disciplines for BOQ details & costing. quality assurance and accuracy in working and presentation.
“Meinhardt Group” is one of the known engineering companies in Asia since 1955. Meinhardt EPCM India Pvt Limited is part of Meinhardt group and is registered in India since 2016 and headquartered in Bangalore. Infrastructure Sector is one of the focus sectors for Meinhardt and our current portfolio of projects is mix of government and private clients Candidate will have opportunity to work on tendering/proposal preparation for, both, Government as well as Private Sector Bids/Opportunities. To study, review RFQ / Enquiry document and understand the requirement techno-commercially Preparation of Executive Summary along with Risk Matrix. Preparation of Technical and Financial Proposal. Map & Develop New Clients. Interact with Potential and Existing Clients. End to End Bid Assurance and Delivery. Preparing Budgetary and firm bids, cost calculations, time schedule along with other bid documents as per the need for customers after evaluation of Enquiry Evaluate and analyze win/lost orders and prepare necessary MIS, Prepare quality objective data on monthly basis. Competitor Information analysis Coordinate Various Internal Department for collecting and compiling information. Creating different presentations. Understand and Summarise Contracts. Proactively initiate and engage new prospects. Protects the organisation's value by keeping information confidential. Interface with existing strategic customers to solidify mutual expectations of performance and growth. Define and follow up of yearly targets and objectives. Develop and implement strategies for new business Determine new opportunities by analysing business needs. Accomplishes the meeting of business development targets Develop and deliver the business plans through carrying out research, formulate market analysis and deliver accurate business reports. Build referral and lead generation networks. Maintain Event Register for Existing Contracts in coordination with the project team. Consult or Discuss with Clients as & when it is required Functional – Should have worked with Engineering Consultancy Firm Should have full understanding of Tendering and Proposal requirements for Indian Government and Infrastructure Sector Business. Should be able to lead the team. Should have necessary experience in client facing roles Must have good command in creating Business Cases, Capability Presentation (Power Point) Education Qualification Bachelor's degree in engineering Years of experience : 5 to 7 years
Key Responsibilities: •Develop and maintain detailed project schedules using MS Project/ Primavera P6 for engineering, procurement, and construction activities. •Coordinate with project teams, contractors, and stakeholders to integrate schedules and ensure alignment with project objectives. •Conduct regular schedule reviews, updates, and risk analysis to identify potential delays and propose corrective actions. •Track project progress, generate reports, and provide insights for decision-making based on schedule trends and variances. •Ensure compliance with project timelines, contractual requirements, and industry best practices. •Support project controls team with scheduling inputs for cost forecasting and resource planning. •Facilitate coordination between engineering, procurement, and construction teams to optimize project schedules.
This is a full-time on-site role for a Revit BIM Piping Modeler, located in Surat. The role involves creating and managing detailed mechanical, electrical, and plumbing (MEP) models using Revit. Daily tasks include collaborating with architects and engineers to produce construction drawings, performing quality checks on models, and ensuring compliance with industry standards. The modeler will also be responsible for updating and maintaining BIM data throughout the project lifecycle. Experience Revit Modelling experience of 5 - 6 years preferably in Plant piping and building / factories. Qualifications Proficiency in Building Information Modeling (BIM) Experience with Mechanical, Electrical, and Plumbing (MEP) systems Familiarity with Architecture and Construction Drawings Excellent teamwork and communication skills Strong attention to detail and problem-solving skills Relevant certifications in BIM or MEP are beneficial Familiar with Part family loading, importing and creation of assembly Pump and piping fundamentals, Support creation in Revit Having collaborative work experience with different disciplines Clash detection and resolution in Navisworks manage Should have knowledge on engineering drawing management.
You will be responsible for developing and maintaining detailed project schedules using MS Project/Primavera P6 for engineering, procurement, and construction activities. Your role will involve coordinating with project teams, contractors, and stakeholders to integrate schedules and ensure alignment with project objectives. Conducting regular schedule reviews, updates, and risk analysis to identify potential delays and propose corrective actions will be a key part of your responsibilities. Tracking project progress, generating reports, and providing insights for decision-making based on schedule trends and variances will also be within your scope. It will be essential to ensure compliance with project timelines, contractual requirements, and industry best practices. Additionally, you will support the project controls team by providing scheduling inputs for cost forecasting and resource planning. Your role will require you to facilitate coordination between engineering, procurement, and construction teams to optimize project schedules effectively.,
The Architect will support the design implementation and coordination of architectural elements at the construction site. This role involves reviewing drawings, conducting site inspections, and ensuring that construction aligns with approved architectural plans and design intent. The Architect will work closely with consultants, contractors, and site teams to resolve design-related issues and maintain quality standards. Responsibilities Reviewing architectural drawings and specifications for site execution. Conduct regular site inspections to ensure compliance with design intent. Coordinate with structural, MEP, and interior teams for integrated execution. Support the Lead Architect in resolving design-related issues on-site. Review shop drawings, material submittals, and mock-ups. Monitor progress of architectural works and report deviations. Ensure adherence to local building codes and project standards. Participate in design coordination meetings and maintain documentation. Provide input on design modifications and value engineering proposals. Qualifications Bachelor’s degree in Architecture from a recognized institution. Minimum 5 years of experience in architectural design and site coordination. Registration with a professional architectural body (e.g., COA) is preferred. Experience in commercial, residential, or institutional projects. Desired Skillset Proficiency in AutoCAD, Revit, SketchUp, and Adobe Creative Suite. Good understanding of architectural detailing, materials, and finishes. Strong communication and coordination skills. Ability to interpret drawings and resolve site-level design issues. Knowledge of sustainable design and construction practices.