Qualification: ME / M.Tech / BE : Thermal /Heat Power/ Mechanical / Automobile / Aeronautical Experience: 4 to 7 Years Role & Responsibilities: Performing vehicle under hood thermal and aerodynamic simulations for full vehicle analysis using Star CCM+/POWERFLOW and model preparation using ANSA Conducting thermal assessments of under hood components to predict heat dissipation, airflow patterns, and temperature distributions for both Battery Electric Vehicles (BEV) and Internal Combustion (IC) vehicles Developing and validation of Computational Fluid Dynamics (CFD) models for thermal management, powertrain, energy storage, and HVAC system performance. Performing simulation setup, post-processing, and validation against experimental data Collaborating with design engineers to propose and implement design modifications that enhance thermal performance and meet regulatory requirements. Engaging with global teams to align on product development, methodologies and best practices Additional Skills: Experience in scripting and automation for ANSA and StarCCM+ to streamline simulation workflows. Familiarity with experimental validation techniques for CFD simulations. Experience in simulation methodology & process development. Automotive industry experience with OEMs or Tier 1 suppliers. Required Skill Set: Expertise in ANSA for preprocessing and STAR-CCM+/Powerflow for CFD simulations related to underhood thermal management and aerodynamics. Strong understanding of vehicle aerodynamics, heat transfer mechanisms, and thermal interactions. Experience in simulating underhood thermal, heat exchangers, cooling ducts, and engine compartment airflow. Proficiency in setting up and solving transient and steady-state thermal and flow simulations. Ability to define boundary conditions, select appropriate turbulence models, and perform mesh optimization for accurate results. Experience in working with CAD data and model building logics for vehicle-level simulation. Strong knowledge of automotive thermal management. Experience in debugging and optimizing simulation models for computational efficiency. Strong understanding of CFD theory and vehicle energy systems. Excellent analytical, communication, and teamwork skills.

Qualification: Bachelors degree in engineering (e.g., Computer Science, Electronics, Mechanical) Experience Range: 3 to 5 Years Roles & Responsibilities: 1. ASPICE Assessments & Audits Conduct software process assessments in line with ASPICE guidelines. Perform audit variants including supplier self-evaluation, software potential analysis, and technical revisions. Define assessment scope, prepare plans, and align with stakeholders. Collect and evaluate objective evidence; deliver assessment reports with findings and recommendations. 2. Process Evaluation & Improvement Assess maturity and capability levels of software development processes. Identify gaps and non-conformities against ASPICE standards. Support process improvement planning and deployment. Collaborate with process owners to implement corrective actions. 3. Compliance & Audit Readiness Ensure readiness for internal and external ASPICE audits. Maintain documentation and audit trails in coordination with quality and engineering teams. Support supplier assessments and monitor compliance. Required Qualifications Certified Provisional Assessor Automotive SPICE® (intacs™ certified). Strong experience in software development life cycle and quality assurance in automotive/embedded domains. In-depth knowledge of ASPICE process categories. Proven experience conducting formal assessments independently or as part of a team. Excellent analytical, documentation, and communication skills. Additional Skills: Knowledge of Functional Safety (ISO 26262) – Understanding of safety-related development processes and how they intersect with ASPICE. Familiarity with Cybersecurity Standards (ISO/SAE 21434) – Awareness of security practices in automotive software development. Tool Proficiency – Hands-on experience with tools like JIRA, and Confluence for requirements and project tracking. Root Cause Analysis – Strong skills in identifying underlying process issues and proposing actionable solutions. Project Management Basics – Understanding of project lifecycle management, planning, and risk mitigation. Interpersonal Skills – Ability to influence, facilitate discussions, and build rapport across cross-functional teams. Organizational Alignment – Ability to ensure ASPICE compliance efforts are aligned with organizational objectives, collaborating effectively with managers and leadership to drive strategic quality initiatives

Qualification: BE / Btech / ME / Mtech : Mechanical / Automobile Total Experience: 3 Years to 7 Years Roles & Responsibilities: Must-Have Skills: Domain Knowledge: Experience with automotive cooling system components. Testing Knowledge: Understanding of cooling system and component-level testing. Design Knowledge: Expertise in plastic and sheet metal design guidelines and manufacturing processes. CATIA V5 Skills: Proficiency in 2D/3D design. PLM Tools: Familiarity with Windchill. GD&T Knowledge: Understanding geometric dimensioning and tolerancing. MS Tools: Proficiency in SharePoint, Excel, PowerPoint. Release Process and Change Management: Knowledge of these processes. Fundamentals and Analytical Skills: Strong foundational and analytical abilities. Communication Skills: Effective communication. Good-to-Have Skills: Battery Electric Vehicles: Knowledge of components, integration, layouts, and installation. Required Skill Set: Design: Cooling lines, heat exchangers, expansion tanks, plastic and sheet metal components, cooling modules, fan shroud assembly. Packaging and Concept Study: Ensuring components fit and function within the vehicle. Coordination: Working with stakeholders and cross-functional teams. Participation: In DFM/DFA/DFS/DFMEA & DVP activities.

Key Responsibilities: Selecting and sourcing suppliers for prototype materials and components. Negotiating prices, delivery timelines, and contractual terms with suppliers. Ensuring purchase orders are accurate, complete, and processed efficiently. Maintaining clear and consistent communication with suppliers, engineering, and product development teams. Resolving discrepancies related to purchase orders and payments. Identifying potential cost-saving measures and process improvements. Establishing and nurturing strong relationships with suppliers. Required Skills: Excellent communication and negotiation abilities to interact effectively with suppliers. Proficiency in procurement software and systems to manage purchase orders and inventory efficiently. Strong problem-solving skills to handle order, payment, and delivery issues. Analytical expertise to assess purchasing data and uncover cost-saving opportunities.

Education Required: Bachelor's in Mechanical Engineering. Experience Required: 5 to 6 Years in Supplier Quality and Delivery Management / Production readiness Roles and Responsbility: Ability to read drawing and understand tolerances and specification as well as production technology Good knowledge of part manufacturing and tool building processes such as Casting, Forging, Stamping, Injection Molding etc Experience in solving supplier related issue in field as well as at plant Experience in ramp-up management, planning and production area as well as detailed knowledge of product development process Experience in interpreting simulation results (e.g. Moldflow) Experience in handling measuring instruments and equipments Fluent with Microsoft Office High degree of flexibility and readiness to travel Negotiation skills, assertiveness, sense of responsibility Fluent English, German is an advantage

Total Experience: 3 Years to 4 Years Role & responsibilities: Sound knowledge in Electrical harness routing & design for Heavy commercial vehicles (electrical parameters selection, electric circuits, vehicle aggregates relations with electrical harness, creation of wire routing etc.) Good knowledge of CATIA EHI Good knowledge of electrical components & packaging Good hand on experience in CATIA for 3D model preparation with CATIA module like part design, assembly and drawings Understanding of manufacturing processes (wiring harness, sheet metal etc.) Good interpersonal skills, excellent communication skills, presentation skills and team player Knowledge of homologations standards related to Harness. Knowledge of product development cycle. Flexibility for international travel (e.g., 3 months) Additional Skills: Knowledge of working experience in PLM: windchill or OAS VBA / CATIA macro / Programming Basic knowledge of electrical components testing parameters, design validation plan preparation of wiring harness Basic knowledge of design quality process Good knowledge of GD&T. should be able to do tolerance stack up.

Role & responsibilities -Designing components in CATIA based on specifications, simulations and know-how - Handle issues such as mechanical strength and thermal management - Working collaborative with cross-functional teams for procuring, installing, simulations, testing, production and service - To perform FMEA and DFMEA - Good understanding of GD & T and application Preferred candidate profile - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system -Advanced knowledge of CATIA V5 is must -Good to have experience in OAS (Open Architecture System) and its integration into design process -Problem-solving skills and creativity to develop innovative designs -Teamwork and communication skills, as design projects are often interdisciplinary. -Good analytical skills required - Designing skills of battery thermal component like cooling plate, Coolent pipes, gas valves is good to have

Role & responsibilities Technical Role: Architect and build scalable data pipelines using AWS and Databricks. Integrate data from sensors (Cameras, Lidars, Radars). Deliver proof-of-concepts and support system improvements. Ensure data quality and scalable design in solutions. Strong Python, Databricks (SQL, PySpark, Workflows), and AWS skills. Solid leadership and mentoring ability. Agile development experience. Preferred candidate profile Good to Have: AWS/Databricks certifications. Experience with Infrastructure as Code (Terraform/CDK). Exposure to machine learning data workflows. Software Skills: Python Databricks (SQL, PySpark, Workflows) AWS (S3, EC2, Glue) Terraform/CDK (good to have)

Role & responsibilities Sound knowledge in VCA Electrical harness design (electrical parameters selection, electric circuits, vehicle aggregates relations with electrical harness, creation of wire routing etc.) with CATIA Good knowledge of electrical components & packaging Good hand on experience in CATIA for 3D model preparation with CATIA module like part design, assembly and drawings Understanding of manufacturing processes (wiring harness, sheet metal etc.) Good knowledge in reading Schematics, Bundles with Capital Harness / Saber. Good interpersonal skills, excellent communication skills, presentation skills and team player Fluent English communication Knowledge of homologations standards related to Harness. Knowledge of product development cycle. Flexibility for international travel (e.g., 3 months) Design / solution identification as per requirement and align within cross functional department, also interaction with development partners. Minimum 60% in academics final years. No year gap in academics. Additional skill Experience on Electric vehicles harness. Knowledge of working experience in PLM: windchill or OAS VBA / CATIA macro / Programming Basic knowledge of electrical components testing parameters, design validation plan preparation of wiring harness

Role & responsibilities - Creation of the 3D Casting product design in CATIA - Creation of Manufacturing drawing using CATIA drafting environment - To perform FMEA and DFMEA - Basic know how of FEM analysis - Coordination with suppliers and cross functional team - Work with 3D modelling software CATIA - Good understanding of GD & T and application - Component level test planning Preferred candidate profile - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system -Advanced knowledge of CATIA V5 is must -Good to have experience in OAS (Open Architecture System) and its integration into design process -Problem-solving skills and creativity to develop innovative designs -Teamwork and communication skills, as design projects are often interdisciplinary. - Good knowhow of casting product design guidelines is must -Good analytical skills required

Role & responsibilities - Development of Cell module electronic components like connectors, Cell module controller etc. - Voltage, Current, Resistance calculations for development of busbars and HV components - Electric layout design of the cell module - Coordination with the supplier and cross functional teams for development of electronic connectors - Clearance and creepage calculation of Cell module - Component level test planning preperation. Preferred candidate profile - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system -Good to have knowledge of CATIA V5 3D designing of the parts and 2D -Good to have experience in OAS (Open Architecture System) and its integration into design process -Problem-solving skills -Teamwork and communication skills, as design projects are often interdisciplinary. -Good knowhow of electronic components and electric circuits is must -Good analytical skills required -Autocrear tool know how is additional advantage.

Role & responsibilities - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system -Advanced knowledge of CATIA V5 is must -Good to have experience in OAS (Open Architecture System) and its integration into design process -Problem-solving skills and creativity to develop innovative designs -Teamwork and communication skills, as design projects are often interdisciplinary. - Good knowhow of casting product design guidelines is must -Good analytical skills required. Preferred candidate profile - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system -Advanced knowledge of CATIA V5 is must -Good to have experience in OAS (Open Architecture System) and its integration into design process -Problem-solving skills and creativity to develop innovative designs -Teamwork and communication skills, as design projects are often interdisciplinary. -Good analytical skills required - Designing skills of battery thermal component like cooling plate, Coolant pipes, gas valves is good to have.

Role & responsibilities - Creation of the 3D Casting product design in CATIA - Creation of Manufacturing drawing using CATIA drafting environment - To perform FMEA and DFMEA - Basic know how of FEM analysis - Coordination with suppliers and cross functional team - Work with 3D modelling software CATIA - Good understanding of GD & T and application - Component level test planning - Reviewing of the 3D design - Reviewing of complex 2D drawings - Participation / Conduct the regular design review meetings Preferred candidate profile - Good Knowhow of Battery pack components and eMobility system - Knowhow of design guidelines for designing HV system -Advanced knowledge of CATIA V5 is must -Good to have experience in OAS (Open Architecture System) and its integration into design process -Problem-solving skills and creativity to develop innovative designs -Teamwork and communication skills, as design projects are often interdisciplinary. - Good knowhow of casting product design guidelines is must -Good analytical skills required - Hands on experience of reviewing the designs and drawings - Knowhow of Casting / Injection molding tooling technology is good to have.

Role & responsibilities • Collaborate with cell suppliers to develop & deliver cell at different sample stages as per RFQ/Compliance matrix. Checking of cell data sheets, handling manuals and other technical documents. Contribute to Cell Development for future generation products. Analyze the cell data sheet, cell BOM and prepare meaningful conclusions and present them to CFTs and management. Additional Skills Understanding of cell working principle, cell internal schematics, terminologies and cell performance parameters. Knowledge of internal components of cell like cathode, anode, separator, electrolyte etc., and their role in cell performance. Strong fundamentals of Chemistry / Material Science . Should be Structured and Organized. Good analytical skills required. Good Communication Skills required. Good Knowledge MS Office tools (Excel, OneNote, Teams, SharePoint etc.)

Role & responsibilities - Designing of plastic supporting structures / Plastic brackets for high voltage busbars and low voltage cable harness - Perform basic FEM simulations like eigen frequncy calculations and static load case analysis - Creation of 2D drawings - Design of layout which includes designing electric circuit, bundle drawings, 3D models, mounting and assembly drawings - Perform FMEA and DFMEA - Collaborate with cross functional team and supplier. Additional skills - Design knowledge of plastic product design / Injection molded component is must to have - Advance knowhow in CATIA V5 software is must to have - Good analytical skills are needed - Design knowhow of HV and LV components like busbars, harness is good to have - Strong communication and presentation skill set is necessary - Knowhow of GD & T and its application - Good Knowhow of Battery pack components and eMobility system.

Role & responsibilities Facilitate Agile ceremonies and lead Scrum practices. Support the Product Owner in backlog management and team organization. Promote Agile best practices (Scrum, SAFe) and continuous delivery improvements. Develop and maintain scalable data pipelines using AWS and Databricks (secondary focus). Collaborate with architects and contribute to solution design (support role). Occasionally travel for global team collaboration. Scrum Master or Agile team facilitation experience. Familiarity with Python and Databricks (PySpark, SQL). Good AWS cloud exposure (S3, EC2 basics Preferred candidate profile Good to Have • Certified Scrum Master (CSM) or equivalent. • Experience with ETL pipelines or data engineering concepts. • Multi-cultural team collaboration experience. Software Skills • JIRA • Confluence • Python (basic to intermediate) • Databricks (basic)

Qualification: BE / M-Tech: Mechanical / Automobile Experience Range: 8 to 12 Years Roles & Responsibilities: Design and Development: Create and develop suspension isolators for Engine/HV battery installation, aggregate mounts and related components to minimize vibrations and noise. Design and Development: Chassis aggregates mainly Casting parts and sheet metal parts for the mounting of battery, Engine and other aggregates etc. Design / solution identification as per requirement and align within cross functional department, also interaction with development partners Problem-Solving: Strong problem-solving skills to troubleshoot and resolve issues that may arise during the design, installation, and operation of isolators Must Have: Suspension Isolator Technology: In-depth knowledge of rubber technology, including design principles, operational procedures, and maintenance protocols, Suspension Isolator Dynamics Mechanical Design and Engineering: Proficiency in mechanical design and engineering to create robust and reliable suspension isolator systems for High voltage battery, Engine and other aggregate mounting. Project Coordination: Ability to manage and coordinate activities with cross-functional teams and suppliers for serial changes and within projects. Manufacturing Processes: Understanding of manufacturing processes such as rubber, sheet metal, casting, and machining. CATIA V5 R20: Hands-on experience in CATIA V5 R20 for model preparation using modules like part design, SMD, GSD, assembly, and drawings. Design Documentation: Capability to perform design documentation in PLM and generate Bill of Materials. GD&T: Good knowledge of Geometric Dimensioning and Tolerancing (GD&T) and ability to perform tolerance stack-up analysis. Interpersonal Skills: Strong interpersonal, communication, and presentation skills. Team player. Responsibility and Decision-Making: Willingness to take responsibility and make decisions. Cross-Functional Teamwork: Ability to work in cross-functional teams to support project teams. International Travel: Flexibility for international travel Good to Have: PLM Systems: Knowledge or working experience in PLM systems such as Windchill or OAS. CATIA V5 Simulation: Knowledge of CATIA V5 Simulation Module GAS/GPS.

Role & responsibilities As a Product Owner, own and prioritize the product backlog. Collaborate with system architects and stakeholders to align on technical vision and product goals. Ensure proactive communication within and across teams. Drive Agile practices (Scrum, SAFe) and contribute to continuous improvement initiatives. Make decisions on usability and product functionality. Gather and manage requirements and feature requests from stakeholders. Occasionally travel to collaborate with global teams. Experience with Agile frameworks (Scrum, SAFe). Strong communication and stakeholder management skills. Requirement gathering and backlog refinement experience. Preferred candidate profile Good to Have Knowledge of ETL, Cloud platforms (e.g., AWS), and general Data Management concepts. Automotive industry experience. Certified Product Owner (e.g., CSPO). Software Skills JIRA (Agile task management) Confluence (Documentation) MS Office (Excel, PowerPoint) Conceptual understanding of modern data workflows

Role & responsibilities Role responsibility: Design, develop, and deploy scalable and reliable applications using Kubernetes, AWS, Cilium, GitLab CI/CD, Crossplane, IAM, and Infrastructure as Code (IaC). Collaborate with various teams to ensure successful technology implementation and integration. Participate in all phases of software development, from conception to maintenance. Troubleshoot and resolve complex technical issues, focusing on performance and reliability. Preferred candidate profile DevOps Engineer - Infrastructure and Automation The Development Platform team build the infrastructure that powers the off-board software (technology outside of the actual vehicle). The role will be instrumental in building and managing cloud-based systems for our autonomous vehicle platform using AWS. Role requirements: Proficiency in Kubernetes, AWS, CI/CD, and IaC. Experience working with Keycloak and other IAM solutions Good collaboration skills

Role & responsibilities Tasks Develop and maintain data pipelines under senior guidance. Support data integration and basic analysis tasks. Work with Databricks (SQL, PySpark) and AWS services. Contribute to Agile and TDD-based development practices. Good Python programming skills. Familiarity with Databricks (SQL, PySpark) and AWS basics (S3, EC2). Agile team experience. Preferred candidate profile Good to Have • Exposure to ETL processes and data management. • Experience with Databricks Workflows. • AWS/Databricks certifications (nice to have). Software Skills • Python • Databricks (SQL, PySpark) • AWS basics (S3, EC2) • JIRA, Git