THOSE WHO HAD APPLIED ALREADY NEED NOT APPLY AGAIN. We are Designers & Manufacturers of Special Purpose Machines having our Office & Works in Pune - Maharashtra. To aid our growth, we are looking for One PLC Engineer Trainee – Fresher (or with ONE year experience) with Bachelor / Diploma in Electrical / Electronics / Instrumentation / Mechatronics Engineering of 2023 batch or later, very good command on PLC / HMI programming, VFD configuration Servo drives, Temperature Indicator Controllers, SSD with up to maximum one years’ experience in any industry - to carry out the following activities. Formal training on above activities from a reputed institute will be an advantage. The Candidates MUST have, apart from hands on experience in Programming - good theoretical knowledge in Electrical / Electronics Engineering with good grasping power & retention capability. The Training during 12 months will comprise of · Study of the drawings issued for manufacturing, prepare the Wire / Cable routing plan & get the wiring completed very nicely. · Programming of the PLC, HMI screens - on Siemens, Fuji, Mitsubishi, Delta PLC- as per the machine requirements. · Setting the different parameters of VFD, Servo, Stepper drive, DC drives & other controllers. · Assembly of the machine panel & pendent as per drawing & work instruction, get the electrical connections made, run the machine, verify the performance parameters. · Undertake the inspection by customers / third party, take down the improvement points, carryout the improvements, painting, finishing, packing & despatch to the customer. · Prepare the Operation & Maintenance Manuals – including the Ladder diagrams, HMI screen shots etc · Visit Customer site for commissioning of the machines & train the operators. · Visit Customer site in case of any breakdown to rectify the problem & make the machine work. Wherever possible, provide remote service with the help of Customer’s maintenance team. During the 12 months training period, the candidates will be paid a Stipend of Rs. 14,000 to Rs. 18,000 per month based on their proficiency. Candidates who have successfully completed the training will be absorbed in the company as Senior Engineers at salaries ranging from Rs. 18,000/- to Rs. 25,000/- per month based on their proficiency. Please apply mentioning your Qualification, experience your current salary (if any), joining time required etc. Job Type: Full-time Pay: ₹130,000.00 - ₹200,000.00 per year Schedule: Day shift Ability to commute/relocate: Chinchwad, Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Education: Diploma (Required) Experience: PLC programming: 1 year (Preferred) License/Certification: Training on PLC & HMI programming & Automation (Required) Passport (Preferred) Location: Chinchwad, Pune, Maharashtra (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

THOSE WHO HAD APPLIED ALREADY NEED NOT APPLY AGAIN. We are Designers & Manufacturers of Special Purpose Machines having our Office & Works in Pune - Maharashtra. To aid our growth, we are looking for TWO Electrical Engineers – Freshers (or with ONE year experience) with Bachelor / Diploma in Electrical Engineering of 2024 batch or later. Candidates with Electronics / Instrumentation / Mechatronics Engineering also can be considered, if they possess good knowledge in Electrical Engineering. Candidate shall have very good command on PLC / HMI programming, VFD configuration Servo drives, Temperature Indicator Controllers, SSD with up to maximum one years’ experience in any industry - to carry out the following activities. Formal training on above activities from a reputed institute will be an advantage. The Candidates MUST have, apart from hands on experience in Programming - good theoretical knowledge in Electrical / Electronics Engineering with good grasping power & retention capability. During the Training period of 12 months, the candidates are expected to learn the following. · Study of the drawings issued for manufacturing, prepare the Wire / Cable routing plan & get the wiring completed very nicely. · Programming of the PLC, HMI screens - on Siemens, Fuji, Mitsubishi, Delta PLC- as per the machine requirements. · Setting the different parameters of VFD, Servo, Stepper drive, DC drives & other controllers. · Assembly of the machine panel & pendent as per drawing & work instruction, get the electrical connections made, run the machine, verify the performance parameters. · Undertake the inspection by customers / third party, take down the improvement points, carryout the improvements, painting, finishing, packing & despatch to the customer. . Learn Robot programming, teaching & commission the Robot at customer's place. · Prepare the Operation & Maintenance Manuals – including the Ladder diagrams, HMI screen shots etc · Visit Customer site for commissioning of the machines & train the operators. · Visit Customer site in case of any breakdown to rectify the problem & make the machine work. Wherever possible, provide remote service with the help of Customer’s maintenance team. During the 12 months training period, the candidates will be paid a Stipend of Rs. 14,000 to Rs. 16,000 per month based on their proficiency. Candidates who have successfully completed the training will be absorbed in the company as Senior Engineers at salaries ranging from Rs. 18,000/- to Rs. 22,000/- per month based on their proficiency. Please apply mentioning your Qualification, experience your current salary (if any), joining time required etc. Job Type: Full-time Pay: ₹130,000.00 - ₹200,000.00 per year Schedule: Day shift Ability to commute/relocate: Chinchwad, Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Education: Diploma (Required) Experience: PLC programming: 1 year (Preferred) License/Certification: Training on PLC & HMI programming & Automation (Required) Passport (Preferred) 2 Wheeler Licence (Preferred) Location: Chinchwad, Pune, Maharashtra (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

"Those who had applied already, need not apply again" PREFERENCE WILL BE GIVEN TO FEMALE CANDIDATES We are in to designing & manufacturing Special Purpose Machines, Robotic systems, Machined components, Jigs & Fixtures, Automation of systems etc., located in Chinchwad / Talawade. To augment our growth, we are looking for TWO recent Graduate Mechanical Engineers, preferably of 2024 / 2025 batch. Ideal candidates will have strong proficiency in Solid Edge, with up to one year of experience. Formal training in solid modeling from a reputable institute will be considered an advantage. Candidates must possess, apart from hands-on experience in solid modeling, good theoretical foundation in mechanical design, and strong learning and retention abilities. They will learn the following during the 12 month training period. Analyzing design input details and creating concepts. Preparing Bills of Materials and Costing Sheets. Developing detailed designs, including calculations for: (a) Structural member selection, (b) Gearbox & motor selection (c) Hydraulic/pneumatic components (d) Couplings, etc. Creating detailed 3D models using Solid Edge. Preparing 2D manufacturing drawings with complete processing details such as: (1) Material selection (2) Tolerances (3) Heat treatment (4) Surface treatment, etc. Testing the assembled machine, verifying performance, and validating parameters. Facilitating inspections by customers or third parties, noting areas for improvement, and implementing necessary changes. During the training period, candidates will receive a stipend ranging from Rs. 13,000 to Rs. 16,000 per month, depending on their proficiency. Upon successful completion of the training, candidates will be offered positions as Senior Design Engineers with salaries ranging from Rs. 18,000 to Rs. 22,000 per month, based on their performance and expertise. Job Type: Full-time Pay: ₹150,000.00 - ₹200,000.00 per year Schedule: Day shift Ability to commute/relocate: Chinchwad, Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Required) Experience: total work: 1 year (Preferred) Solid modelling: 1 year (Preferred) License/Certification: Training on Solid Modeling (Preferred) Driving Licence (Preferred) Passport (Preferred) Location: Chinchwad, Pune, Maharashtra (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

THOSE WHO HAD APPLIED ALREADY NEED NOT APPLY AGAIN. We are Designers & Manufacturers of Special Purpose Machines having our Office & Works in Pune - Maharashtra. To aid our growth, we are looking for TWO Electrical Engineers – Freshers (or with ONE year experience) with Bachelor / Diploma in Electrical Engineering of 2024 batch or later. Candidates with Electronics / Instrumentation / Mechatronics Engineering also can be considered, if they possess good knowledge in Electrical Engineering. Candidate shall have very good command on PLC / HMI programming, VFD configuration Servo drives, Temperature Indicator Controllers, SSD with up to maximum one years’ experience in any industry - to carry out the following activities. Formal training on above activities from a reputed institute will be an advantage. The Candidates MUST have, apart from hands on experience in Programming - good theoretical knowledge in Electrical / Electronics Engineering with good grasping power & retention capability. During the Training period of 12 months, the candidates are expected to learn the following. · Study of the drawings issued for manufacturing, prepare the Wire / Cable routing plan & get the wiring completed very nicely. · Programming of the PLC, HMI screens - on Siemens, Fuji, Mitsubishi, Delta PLC- as per the machine requirements. · Setting the different parameters of VFD, Servo, Stepper drive, DC drives & other controllers. · Assembly of the machine panel & pendent as per drawing & work instruction, get the electrical connections made, run the machine, verify the performance parameters. · Undertake the inspection by customers / third party, take down the improvement points, carryout the improvements, painting, finishing, packing & despatch to the customer. . Learn Robot programming, teaching & commission the Robot at customer's place. · Prepare the Operation & Maintenance Manuals – including the Ladder diagrams, HMI screen shots etc · Visit Customer site for commissioning of the machines & train the operators. · Visit Customer site in case of any breakdown to rectify the problem & make the machine work. Wherever possible, provide remote service with the help of Customer’s maintenance team. During the 12 months training period, the candidates will be paid a Stipend of Rs. 14,000 to Rs. 16,000 per month based on their proficiency. Candidates who have successfully completed the training will be absorbed in the company as Senior Engineers at salaries ranging from Rs. 18,000/- to Rs. 22,000/- per month based on their proficiency. Please apply mentioning your Qualification, experience your current salary (if any), joining time required etc. Job Type: Full-time Pay: ₹130,000.00 - ₹200,000.00 per year Schedule: Day shift Ability to commute/relocate: Talawade, Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Education: Diploma (Required) Experience: PLC programming: 1 year (Preferred) License/Certification: Training on PLC & HMI programming & Automation (Required) Passport (Preferred) 2 Wheeler Licence (Preferred) Location: Talawade, Pune, Maharashtra (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person