88 Jobs in Barasat-I

Scope Of Work* Primary Shared Across Functionally Lead for assigned projects in the engineering of packaged equipment. Should have hands on experience in design and detailed engineering of Water relate packages like waste water treatment of oil & gas industries, Raw water treatment, RO module, Produced water treatment & softening plant for re-injection Petro chemical plant Effluent treatment. Preparation of Requisitions, equipment datasheet, evaluation of vendor offers, and preparation of technical bid analysis, review and approval of vendor document. Co-ordinate among project team members on technical matters Support/ implement departmental quality management programs Trouble-shoot and resolve site problems pertaining to packaged equipment engineering Thorough with the multidiscipline engineering functions pertaining to the packaged equipment Co-ordinating with the engineering disciplines, proposal, procurement and construction interfaces Relationships Management* Internal External Interaction with other discipline LEs / Team members and Project Team Interaction with Vendors / Clients / Third party members Key Result Areas* Lead for assigned projects in the engineering of packaged equipment with the support of taskforce engineers Ensure quality and timelines for deliverables Bring improvement in the engineering systems Generation of Mechanical Design Datasheet Participating in inspection, testing and commissioning activities Show more Show less

cope Of Work* Primary Shared Across Functionally To study the Basic Engineering Design Document and other documents necessary to carry out further engineering activities To ensure that engineers and designers in his/ her team are aware of specific job requirements and to ensure that the departmental quality procedures are adopted consistently. Relationships Management* Internal External Interaction with multi-discipline LE’s and Project Team Interaction with Client / Vendors Key Result Areas* To perform and review/check engineering calculations, drawings and review Plant 3D models as required. Key Competencies Behavioral Need to Have Nice to Have Excellent Communication skills Leadership qualities Planning and Organizing Decision Making and Problem Solving Customer Focus Team work Innovative Thinking Technical Need to Have Nice to Have Should have sound fundamentals in Civil and structural engineering. Shall have hand-on experience in utilizing STAAD-Pro. Shall have necessary skills and knowledge to check design calculations and drawings for Foundation and structures. Working in integrated 3D environment including interface with other departments and vendors. Exposure to any one plant design system viz. PDS, PDMS or SP-3D is essential. Exposure to design of foundations / structures and other civil works such as pits/ponds for refinery/petrochemicals or power plants is required. Exposure to other design software such as Foundation-3D, Mat-3D, GTStruDl, SAP2000, ETABS etc. will be desirable. Show more Show less

Scope Of Work* Primary Shared Across Functionally The candidate is expected to work in the Role Specialist & guide team for Oil & Gas Onshore processing facilities, petroleum refining, petrochemicals, chemicals, fertilizers, LNG & LPG projects. Should possess knowledge of discipline, current technology, codes & standards. Responsible for coordinating with local and international clients/PMC and vendors. Monitoring / Review of engineering activities by efficiently communicating within the team and other disciplines. Relationships Management* Internal External Project team members, Cross-functional team members Local and International clients/PMC and vendors Key Result Areas* Substation Engineering, Field Engineering, Interface Engineering, Coordination with Site, client & vendors. Strong exposure to various National/International codes and standards as well as Oil/Gas clients’ standards/practices. Should have handled procurement engineering inclusive of GTG/STG/Switchyard packages & FAT experience for major tagged equipment. Key Competencies Behavioral Need to Have Nice to Have Good communication skills Team work Technical Need to Have Nice to Have Should have strong functional knowledge in System Study (Short Circuit, Load Flow, Motor start-up, Transient Stability, Arc Flash, Insulation coordination etc), Relay coordination, EMC, EHAZOP, Energy Optimisation, SPEL and should have hands on experience in any of the software’s such as Digsilent, ETAP, SKM tools, EDSA etc. Must have worked at site for at least 2 projects. Exposure to proposal engineering including cost estimation is required. Should have taken role of Lead (Chairman) independently for Design Review/EHAZOP/Energy Optimisation for at least one oil & gas project Should be working in the capacity of lead engineer for more than 10 years and should have lead at least 5 large scale projects as lead Engineer. Should be thorough with work process in a detail Engineering Consultant Company. Show more Show less

Scope Of Work* Primary Shared Across Functionally Departmental Administration/ Interaction with Higher Management and various Departments Establish norms for various departmental activities. To ensure tracking of productivity of Engineering Deliverables Allot manpower for projects and review and optimize man hours Review of Engineering documents, reports & Operating manual Review of SAFE Charts, Cause & Effect Diagram Material tracking, MRIR control, SRN, material movement control Lead, Guide, Assist the Process Engineering Team & other Project Team members to execute contract activities. To be responsible for all the work with reference to a document/deliverables and/or activity assigned to team. To ensure that the documents/deliverables, generated, are in order before issuing it to others. To anticipate and discuss any potential delays and problems, if a with the Area Lead Engineer Relationships Management* Internal External To liase with Job Engineers and other discipline Lead Engineers Clients / Vendors Key Result Areas* Monitor, Support and review following documents: Technical proposal & feasibility Study and technical study reports. Approving the department procedures / plans / documents such as: Procedure and basis for the job Procedure for interface control with other departments DCN Design plan / Engineering execution plan including organization and engineering schedule for the job Basic Engineering Design Data / Design Criteria Procurement and construction schedule for the job ( if applicable ) Plan for sub-contracting the design/engineering activities Corrective action plan for identified non-conformance of design Trouble shooting report Corrective action plan for Non-conformances and observations of audits. Instruction manual for Pre-commissioning activities Proper and timely execution of projects in department Ensure completion of work in the assigned budget , project plan and man hours allotted Development & Growth of employees in the department Support to other disciplines in execution of projects Key Competencies Behavioral Need to Have Nice to Have Maintain good communication with discipline team and inter discipline. Leadership qualities Planning and Organizing Decision Making and Problem Solving Customer Focus Team work Innovative Thinking Drive Motivation Technical Need to Have Nice to Have Minimum 20 years of experience in Project Engineering in the hydrocarbon industry Relevant Design experience in the area of process engineering Experience in Design & Engineering of refinery, petrochemical, gas processing plants and LNG cryogenic units Show more Show less

Seeking a skilled and experienced Lead Buyer to oversee the procurement of mechanical packages for our EPC power projects. The ideal candidate will have extensive knowledge of mechanical systems, supply chain management, and procurement processes within the energy sector. This role will require collaboration with project teams, suppliers, and other stakeholders to ensure that all mechanical components are sourced effectively and efficiently. Key Responsibilities Supplier Management: Identify, evaluate, and negotiate with suppliers to secure competitive pricing and favorable terms for mechanical packages like Water systems, HVAC, Compressed Air Systems, Fire detection system etc. Technical Knowledge : .Having knowledge of power plant packages Cost Analysis: Conduct thorough cost analyses and assessments to optimize procurement decisions and minimize costs while maintaining quality. Contract Management: Draft, review, and negotiate contracts with suppliers, ensuring all terms meet project requirements and mitigate risks. Market Research: Stay updated on industry trends, market conditions, and new technologies to inform procurement strategies. Cross-Functional Collaboration: Work closely with project managers, engineers, and other departments to ensure timely delivery and integration of mechanical packages into projects. Supplier Performance Monitoring: Establish KPIs to assess supplier performance and ensure compliance with contractual obligations. Reporting: Prepare and present regular reports on procurement activities, supplier performance, and market trends to management. Negotiation Skills: Proven ability to negotiate effectively with suppliers and manage contracts. Analytical Skills: Strong analytical and problem-solving skills with a focus on cost control and value optimization. Communication Skills: Excellent verbal and written communication skills, with the ability to collaborate effectively with diverse teams. Software Proficiency: Familiarity with ERP / SAP / SAP HANA systems, and MS Office Suite. Show more Show less

We are looking for an experienced Lead Buyer to manage the procurement of mechanical rotary packages for our EPC power projects. The successful candidate will have a deep understanding of mechanical rotary equipment, strong negotiation skills, and a track record in procurement within the energy sector. This role will involve collaboration with engineering, project management, and supply chain teams to ensure timely and cost-effective sourcing. Key Responsibilities Supplier Management: Identify, evaluate, and engage suppliers for mechanical rotary equipment, ensuring competitive pricing and optimal terms. Technical Collaboration: Understand technical specifications for mechanical rotary packages like pumps, turbine etc, its supplier base and estimate its cost. Cost Optimization: Conduct detailed cost analysis and assessments to achieve cost-effective procurement while maintaining high quality and performance standards. Contract Negotiation: Negotiate contracts and agreements with suppliers, ensuring all terms protect the project's interests and mitigate risks. Market Intelligence: Keep abreast of market trends, new technologies, and industry developments to inform procurement decisions. Cross-Functional Engagement: Collaborate with project managers, engineers, and other stakeholders to facilitate the timely delivery and integration of rotary packages into project schedules. Supplier Performance Monitoring: Develop and track key performance indicators (KPIs) to assess supplier performance and adherence to contract specifications. Qualifications Education: Bachelor’s degree in Mechanical Engineering. Diploma engineer with 10 - 12 experience can also be considered. Negotiation Skills: Proven ability to negotiate contracts effectively and manage complex supplier relationships. Analytical Abilities: Strong analytical and problem-solving skills, with a focus on cost reduction and value maximization. Communication Skills: Excellent verbal and written communication skills, with the ability to work collaboratively with cross-functional teams. Software Proficiency: Proficient in procurement through ERP / SAP / SAP HANA systems, and MS Office applications. Show more Show less

Education Qualification: BE/ BTech in Instrumentation & Control/ Electronics & Instrumentations/ Electrical & Instrumentation/ Electronics/ Electronics & Communication Engineering Experience Band: 15-18 years Minimum Software Experience: MS Office Work Experience (expected): Candidate must be associated with Gas/ Oil/ Coal based Power Projects in the role of Basic & Detail Engineering. O&M or Site Supervision or EPC Execution based experience candidates shall not apply. Knowledge of basic operations and design of Auxiliary Boiler, GTG, HRSG, STG, and steam-water cycle equipment is preferrable. Candidate should have sufficient knowledge in selection of various instruments per application requirement, preparing/ review of technical datasheets & specifications for instrument/ DCS/ PLC/ CEMS/ SWAS/ VMS, mechanical package systems like Boilers/ Gas Turbines/ Steam Turbines/ Water Treatment Plant/ MV or LV Pumps/ Air Compressors & Dryers. Show more Show less

Scope Of Work* Primary Shared Across Functionally To study the Basic Engineering Design Document and other documents necessary to carry out further engineering activities To ensure that engineers and designers in his/ her team are aware of specific job requirements and to ensure that the departmental quality procedures are adopted consistently. Relationships Management* Internal External Interaction with multi-discipline LE’s and Project Team Interaction with Client / Vendors Key Result Areas* To perform and review/check engineering calculations, drawings and review Plant 3D models as required. Key Competencies Behavioral Need to Have Nice to Have Excellent Communication skills Leadership qualities Planning and Organizing Decision Making and Problem Solving Customer Focus Team work Innovative Thinking Technical Need to Have Nice to Have Should have sound fundamentals in Civil and structural engineering. Shall have hand-on experience in utilizing STAAD-Pro. Shall have necessary skills and knowledge to check design calculations and drawings for Foundation and structures. Working in integrated 3D environment including interface with other departments and vendors. Exposure to any one plant design system viz. PDS, PDMS or SP-3D is essential. Exposure to design of foundations / structures and other civil works such as pits/ponds for refinery/petrochemicals or power plants is required. Exposure to other design software such as Foundation-3D, Mat-3D, GTStruDl, SAP2000, ETABS etc. will be desirable. Show more Show less

Job Title: English Language Teacher - Delhi Public School - Dattapara Job Overview: We are hiring an experienced English Language Teacher to develop students reading writing grammar and communication skills in Dattapara. Key Responsibilities Teach English language and literature to assigned grades. Develop creative writing and spoken skills. Conduct debates essay writing and other language activities. Qualifications Graduate/Postgraduate in English + B.Ed. Prior CBSE Teaching Experience Preferred. Excellent fluency and command over the language. Show more Show less

Scope Of Work* Primary Shared Across Functionally Plan, schedule and supervise process engineering activities like process simulation, design calculations, thermal design of heat exchangers etc. Carry out/ supervise process engineering activities like residual process design, updating of PFDs, P&IDs, design of offsite and utility systems, hydraulic calculations, process datasheets of equipment and instruments Carry out technology evaluation, feasibility studies and licensor interactions Plan, lead/ conduct (as applicable) process and HSE studies including HAZOP, HAZID, SIL, IPF, HAZAN, etc Procedure and basis for the project. Procedures for interface control with other departments. Engineering schedule for the job. Identify and mitigate risks related to performance guarantees, vendor packages scope Review of vendor offers, preparation of technical bid analysis Show more Show less

ope Of Work* Primary Shared Across Functionally To study the Basic Engineering Design Document and other documents necessary to carry out further engineering activities To perform and review/check engineering calculations, drawings and review Plant 3D models as required. To Design of RC & Steel Structure for Oil/Gas/Refinery/Petrochemical projects using STAAD, MS-Office & other Civil Engineering Software. To ensure that the departmental quality procedures are adopted consistently. Designer To carry out Drafting work and 3D Modelling work for the assigned items such as Equipment Foundations, Machine Foundations, Piperack, Equipment supporting Structures, Buildings etc. Working in integrated 3D environment including interface with other departments and vendors. Exposure to any one plant design system viz. PDS, PDMS or SP-3D is essential. Show more Show less

Scope Of Work* Primary Shared Across Functionally Develop systems and sub-systems and pre-commissioning works lists Develop and ensure safety conditions with respect to pre-commissioning, commissioning and start up activities at site Scheduling of specialist and vendors visits during execution of pre-commissioning, commissioning and start-up Ensure that testing of equipment, pipelines etc. is done Facilitate flawless pre-commissioning, commissioning and project start-up, manage operation and maintenance as per requirements Manage and ensure that pre-commissioning, commissioning and start-up works are performed as per project schedule & budget and in compliance with quality & safety requirements Plan and schedule activities in accordance with overall project schedule Participate in Engineering & Special studies Interact with Clients / Licensors / Construction / Engineering / Allied disciplines for activities planning and resources mobilization Manage manpower for execution of pre-commissioning, commissioning and start-up Provide inputs regarding operability and maintainability during constructability studies to Engineering Coordinate with Engineering Office for resolution of issues Responsible for obtaining approvals and maintaining the documents related to pre-commissioning/ commissioning protocols Relationships Management* Internal External Employees, Project Management Team Contractors, Vendors, Client, On-site management Key Result Areas* Prepare pre-commissioning procedures and manual for issue Prepare & update checklists for pre-commissioning and commissioning as per clauses in the contract Prepare the project for “Ready for start-up “ Prepare Commissioning Close-out Report of the project Show more Show less

Scope Of Work* Primary Shared Across Functionally Develop systems and sub-systems and pre-commissioning works lists Develop and ensure safety conditions with respect to pre-commissioning, commissioning and start up activities at site Scheduling of specialist and vendors visits during execution of pre-commissioning, commissioning and start-up Ensure that testing of equipment, pipelines etc. is done Facilitate flawless pre-commissioning, commissioning and project start-up, manage operation and maintenance as per requirements Manage and ensure that pre-commissioning, commissioning and start-up works are performed as per project schedule & budget and in compliance with quality & safety requirements Plan and schedule activities in accordance with overall project schedule Participate in Engineering & Special studies Interact with Clients / Licensors / Construction / Engineering / Allied disciplines for activities planning and resources mobilization Manage manpower for execution of pre-commissioning, commissioning and start-up Provide inputs regarding operability and maintainability during constructability studies to Engineering Coordinate with Engineering Office for resolution of issues Responsible for obtaining approvals and maintaining the documents related to pre-commissioning/ commissioning protocols Relationships Management* Internal External Employees, Project Management Team Contractors, Vendors, Client, On-site management Key Result Areas* Prepare pre-commissioning procedures and manual for issue Prepare & update checklists for pre-commissioning and commissioning as per clauses in the contract Prepare the project for “Ready for start-up “ Prepare Commissioning Close-out Report of the project Show more Show less

Technical Competency Calculation and Design of Lighting, Fire Alarm system including smoke detector location study, earthing and lightning protection Cable sizing, cable schedule, Cable tray and trench sizing Development of layouts of Lighting, Fire Alarm system device location layouts, Earthing & Lighting protection layouts, conduit layouts, cable route layouts, lighting panel schedules, circuit distribution diagrams, Block diagrams Interface with other facilities such as structural, architectural requirements like false ceiling, false flooring, HVAC, firefighting system, telecommunication system, plumbing works etc. Procurement assistance (preparation of Material requisition, Vendor offer evaluation, Technical Bid Analysis and Vendor document review) for the electrical bulk ( Trays, lighting material, Junction boxes panels, earthing material, conduits, sockets, cables and wires, electricals for HVAC package which includes HVAC MCC. Thorough knowledge of the Codes and Standards for the electrical engineering such as IS , BS, IEEE, NFPA, IEC, IESNA etc. Ability to interact with customers for approval of the calculations, layouts and 3D model. Knowledge about the IGBC AP (Indian Green Building Council – Accredited Professionals) will be an added advantage. Show more Show less

Scope Of Work* Primary Shared Across Functionally Preparation of Electrical drawings of Substation and plant which includes Substation equipment layout, Transformer installation drawings, earthing layouts, lighting layouts, Fire alarm system layouts, hazardous area layouts, Single line diagrams, motor schematics, Cable tray/trench routing layouts, power layouts, block diagrams. The candidate is expected to prepare Electrical Drawings of Industrial Buildings such as Substations, Control rooms etc., and Process Plant Electrical layouts in the capacity of Designer. Relationships Management* Internal External Interaction with JEs and Cross-functional team members Vendor, On-site execution team Key Result Areas* Preparation of Electrical drawings of Substation and plant Key Competencies Behavioral Need to Have Nice to Have Good communication skills Customer Focus Team work Technical Need to Have Nice to Have The candidate must be familiar with the aspects of interface with other disciplines in a project scenario. Extraction of Bulk MTO from layouts. Exposure to Hydrocarbon Industry is required Hands on experience on 2D software AutoCAD, Micro station, 3D model software like PDS/PDMS, &SP3D will be an added advantage. Show more Show less

Technical Competency Calculation and Design of Lighting, Fire Alarm system including smoke detector location study, earthing and lightning protection Cable sizing, cable schedule, Cable tray and trench sizing Development of layouts of Lighting, Fire Alarm system device location layouts, Earthing & Lighting protection layouts, conduit layouts, cable route layouts, lighting panel schedules, circuit distribution diagrams, Block diagrams Interface with other facilities such as structural, architectural requirements like false ceiling, false flooring, HVAC, firefighting system, telecommunication system, plumbing works etc. Procurement assistance (preparation of Material requisition, Vendor offer evaluation, Technical Bid Analysis and Vendor document review) for the electrical bulk ( Trays, lighting material, Junction boxes panels, earthing material, conduits, sockets, cables and wires, electricals for HVAC package which includes HVAC MCC. Thorough knowledge of the Codes and Standards for the electrical engineering such as IS , BS, IEEE, NFPA, IEC, IESNA etc. Ability to interact with customers for approval of the calculations, layouts and 3D model. Knowledge about the IGBC AP (Indian Green Building Council – Accredited Professionals) will be an added advantage. Show more Show less

Scope Of Work* Primary Ensure that testing of equipment, pipelines etc. is done as per procedures Ensure safety conditions with respect to pre-commissioning, commissioning and start up activities at sites Develop systems and sub-systems and pre-commissioning works lists Prepare & update checklists for pre-commissioning and commissioning as per clauses in the contract Facilitate flawless pre-commissioning, commissioning and project start-up, manage operation and maintenance as per requirements Shared Across Functionally Coordinate with Engineering Office for resolution of issues Provide inputs to Commissioning Manager for preparing Commissioning Close-out Report of the project Support Commissioning Manager in all pre-commissioning / commissioning, start-up and plant operation & maintenance related activities at site. Coordinate with Engineering Office for resolution of issues Interact with Clients / Licensors / Construction / Engineering / Allied disciplines for activities in absence of Commissioning Manager Show more Show less

Implementation of corporate policy, initiatives and targets. Management & control of the jobs executed by the department. Assignment of the group / team for the job. Ensures availability of adequate resource (Hardware / software / manpower) for execution of job. The work, which affect the management systems and carrying out the operation and management of the department. Developing and maintaining all standards, procedures and tools so as to ensure Quality Assurance in work and improvement in productivity. Annual planning for books, code and standards. Collection of vendor / manufacturer’s information including latest developments. Identification and association with professional bodies / academia. Approval of business trip. Nominating staff members for overseas deputation. Plan and approval of training requirements. Guide and conduct annual appraisal activities. Performance rating and recommendations for promotions. Career planning for department persons. Evolving annual man power and capital/revenue budget including specific software requirements. Providing guidance on technical issues to Dy. Department Managers / Group Leaders/ Lead Engineers from time to time for cost and schedule effective solutions. Participating and/or providing support and guidance to Design Reviews, P&I-D Reviews, Safety studies, HAZOP, Plot Plan Reviews and 3D Model reviews. Reviewing, analysing & resolving design requirements, discrepancies & inferences within area of discipline with project engineer, Clients & Contractors as required. Participating and contributing to Risk Management and Value Engineering Workshops for Projects. Providing inputs to top management for proposal feasibility. Approval, issuance and revision of management systems documents of the department. Approval and execution of corrective and preventive actions. Approval of design and engineering documents of critical significance wherein the review of such documents is carried out by Deputy Department Manager. Approval of disposition procedure for nonconformity found in the department. Show more Show less

Scope Of Work* Primary Shared Across Functionally To study the Basic Engineering Design Document and other documents necessary to carry out further engineering activities To ensure that engineers and designers in his/ her team are aware of specific job requirements and to ensure that the departmental quality procedures are adopted consistently. Relationships Management* Internal External Interaction with multi-discipline LE’s and Project Team Interaction with Client / Vendors Key Result Areas* To perform and review/check engineering calculations, drawings and review Plant 3D models as required. Key Competencies Behavioral Need to Have Nice to Have Excellent Communication skills Leadership qualities Planning and Organizing Decision Making and Problem Solving Customer Focus Team work Innovative Thinking Technical Need to Have Nice to Have Should have sound fundamentals in Civil and structural engineering. Shall have hand-on experience in utilizing STAAD-Pro. Shall have necessary skills and knowledge to check design calculations and drawings for Foundation and structures. Working in integrated 3D environment including interface with other departments and vendors. Exposure to any one plant design system viz. PDS, PDMS or SP-3D is essential. Exposure to design of foundations / structures and other civil works such as pits/ponds for refinery/petrochemicals or power plants is required. Exposure to other design software such as Foundation-3D, Mat-3D, GTStruDl, SAP2000, ETABS etc. will be desirable. Show more Show less

cope Of Work* Primary Implement human resources programs by providing human resources services, including talent acquisition, staffing, employment processing, compensation, health and welfare benefits, training and development, records management, safety and health, succession planning, employee relations and retention, AA/EEO compliance, and labour relations; completing personnel transactions. Develop human resources solutions by collecting and analysing information; recommending courses of action. Prepare reports by collecting, analysing, and summarizing data and trends. Update job knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations. Shared Across Functionally Manage client expectations by communicating project status and issues; resolving concerns; analysing time and cost issues; preparing reports. Show more Show less

Scope Of Work* Primary Identify training and development needs within the organization through job analysis, appraisal schemes and regular consultation with business managers and human resources departments Design and expand training and development programmes based on both the organization’s and the individual's needs Consider the costs of planned programmes and keeping within budgets as assessing the return on investment of any training or development programme is becoming increasingly important Work in a team to produce programmes that are satisfactory to all relevant parties in an organization Developing effective induction programmes; Devising individual learning plans; Produce training materials for in-house courses; Managing the delivery of training and development programmes and, in a more senior role, devising a training strategy for the organization; Ensuring that statutory training requirements are met; Evaluate training and development programmes; Amending and revise programmes as necessary, in order to adapt to changes occurring in the work environment; Shared Across Functionally Monitor and review the progress of trainees through questionnaires and discussions with managers Help line managers and trainers solve specific training problems, either on a one-to-one basis or in groups. Show more Show less

Scope Of Work* Primary Shared Across Functionally To study the Basic Engineering Design Document and other documents necessary to carry out further engineering activities To ensure that engineers and designers in his/ her team are aware of specific job requirements and to ensure that the departmental quality procedures are adopted consistently. Relationships Management* Internal External Interaction with multi-discipline LE’s and Project Team Interaction with Client / Vendors Key Result Areas* To perform and review/check engineering calculations, drawings and review Plant 3D models as required. Key Competencies Behavioral Need to Have Nice to Have Excellent Communication skills Leadership qualities Planning and Organizing Decision Making and Problem Solving Customer Focus Team work Innovative Thinking Technical Need to Have Nice to Have Should have sound fundamentals in Civil and structural engineering. Shall have hand-on experience in utilizing STAAD-Pro. Shall have necessary skills and knowledge to check design calculations and drawings for Foundation and structures. Working in integrated 3D environment including interface with other departments and vendors. Exposure to any one plant design system viz. PDS, PDMS or SP-3D is essential. Exposure to design of foundations / structures and other civil works such as pits/ponds for refinery/petrochemicals or power plants is required. Exposure to other design software such as Foundation-3D, Mat-3D, GTStruDl, SAP2000, ETABS etc. will be desirable. Show more Show less

Scope Of Work* Primary Shared Across Functionally Category Buyers will be responsible for execution of the Category Strategies through completing purchasing process and ensuring contract closures with accurate documentation. Ensure comprehensiveness of MR / MTO / SR. Provide support to Lead Buyers / Category Managers in developing Frame agreements and rate contracts. Recommend relevant, category specific supplier development activities to Lead Buyers. Record and provide support to address supplier grievances. Record Commercial Bid clarifications and support technical team on queries / deviations received from suppliers and ensure timely resolution, implementing relevant value improvement levers. Support Lead Buyer and Category Manager in conducting negotiations with suppliers and liaising with suppliers during source to contract. Timely documentation and record keeping post completion of RFX processes to facilitate audits. Manage internal / external / cross-functional communication between SCM, QA/QC, PMT, Engineering, Vendors, etc. Relationships Management* Internal External Lead Buyers / Category Managers, Project SCM Manager Third Party Agencies, Suppliers Key Result Areas* Follow and execute the category strategy for the sourcing of items and develop RFQs. Execute order as per agreed rate agreements and manage emergency procurement. Prepare Commercial Bid Evaluation (CBE), Note for Approval (NFA), Procurement Change Note (PCN) and other commercial documents. Timely placement of purchase orders / work orders / amendments as per project schedule and ensure release to suppliers. Procurement of valves Key Competencies Behavioral Need to Have Nice to Have Commercial Acumen Effective Communication Time & Priority Management Flawless Execution Technical Need to Have Nice to Have Category expertise Compliance, Risk & Ethics Negotiation Skills Contracting Relationship Management Experience in procurement of line pipes for oil and gas owner / EPC companies Show more Show less

Review of Tender docs to understand discipline tech. SoW Co-ordinate with Engineering for MTOs, BOQs & MRs Prepare & present analysis of work quantities to proposal lead Participate in Site visits & identify critical aspects of execution Prepare first principle resource & cost estimates Prepare Subcontract RFQs for various civil & building Works Evaluate quotations, hold clarifications, benchmarking of Subcontract prices/ analyze, negotiation & finalize Subcontract Costs. coordinate with various departments for technical/cost inputs. contribute in constructability reviews Risk identification and prepare mitigation plans Time schedule analysis and support planning team Compilation of complete discipline costs for review Prepare Benchmarking comparison / analysis of costs Maintain Cost database of executed projects and bids. Show more Show less

Scope Of Work Primary Buyer will carry out processing of RFQs, placement of orders & close out of the Purchase orders. For Identified “A-Cat.” Items: - Identify Suppliers in consultation with CLB for sending RFQs & ensure timely receipt of Offers. Co-ordinate with Proposal Manager / DEC / QA&I for receipt of TQ and replies for the same from Supplier. Prepare & resolve CQs with Suppliers. Prepare CBE. Highlight “Price-Adders” for unresolved deviations of the Suppliers. Arrange meeting with Suppliers on Price, delivery and other terms, negotiation for A-Category items & Supplier selection. Selection of Supplier and entering into Back-to-Back Agreements (where required) in consultation with CLB. Review Supplier list of ITB circulated by PPM and suggest additional Suppliers. Prepare and issue RFQ to Suppliers and expedite receipt of Supplier’s offer. Evaluation of offers and preparation of Commercial Bid Evaluation. Prepare & resolve CQs with Suppliers. Provide inputs to CLB for Supplier selection for A-Category items. Negotiation of B & C Category items, Supplier selection & ordering. Ensure ordering of items as per project schedule meeting the requirement of TP & Delivery for B & C category items. Timely preparation & release of P.O. in SAP as per agreed terms. Support activities to CLB during “Frame Agreements” (viz. drafting & documentation) for identified Items and operating the “Frame Agreements”. Distribute un-priced and priced P.O. copy as per finalized work instructions and Communication Procedure Obtain Transportation Sketch from Supplier for ODC/OWC transportation. Provide periodic intimation to LLE about tentative date of readiness of ODC/OWC. Updating of Progress Schedule at various stages. Checking draft Shipping documents of Supplier. Obtaining clearance from QA&I, DEC, PMT as required and giving Despatch Clearance to Supplier. Send intimation on despatch to LLE, Site, PM. Timely receipt of shipping documents from Supplier esp. for Import orders. Issuing RPs to Suppliers and Reconciliation of the same. Timely opening and monitoring of LC and amendments, if required. Send information pertaining to shipment to F&A for arrangement of funds in advance. Update Fund Forecast Register. Verify Supplier invoices, make Payment Request and arrange timely payment to Supplier. Obtaining amendment, extension of Supplier BGs. Advise F&A for discharges of BG. Obtain “Final Documents” from Suppliers at appropriate time. Ensure timely availability of Supplier representative at site for Erection / Commissioning. Maintain record of costs incurred by L&T (on behalf of the Supplier) & ensure that such costs are back charged to the Supplier. Collate the Procurement related risks issues for mitigation. Maintain case files (hard copy / soft copy). Update records for Supplier Performance Evaluation in system (Buyer related data) Store documents as per the asset classification. Ensure that DACP, SOP and other procedures are followed Obtaining Supplier documents for Insurance claim, if required Closing Supplier “Change-Order”, Delivery Extension and PO Close out. Shared Across Functionally Co-ordinate with Supplier for Export formalities. Co-ordinate with DEC / QA&I for receipt of TQ / TBA and replies for the same from Supplier. Discuss with CLB / PPM for finalizing list of suppliers for sending RFQ. Provide inputs to PMT for Billing to Client. Initiate through F&A, the process of BG encashment where required in consultation with CLB / PPCH. Co-ordination with Supplier for carrying out repair / replacement of the materials as required during Defect Liability Period. Show more Show less