Position Purpose: Installs, repairs and modifies Woodward control systems (hardware and software) at the customers location with little or no support or supervision. This position reports to the Engineering Supervisor, Field Service Supervisor, Customer Service supervisor, Engineering Manager or Manager Aftermarket Sales and Service. Essential Functions: Prepares for a trip by studying drawings, schematics, manuals and other pertinent information to determine the best solution and proper tools for system set up or problem resolution. Consults with customers, field service dispatchers/supervisors to define the scope of work for projects. Performs and oversees the installation or replacement of equipment and control software and may direct lower level Field Service Engineer. Repairs, replaces or modifies equipment utilizing the knowledge of electrical and/or mechanical systems, along with using standard test instruments and hand tools. Uses Woodward hardware and software to analyze malfunctions, configure systems, tune/adjust dynamics and make minor software modifications. Instructs and directs customers and/or lower level engineers in operating and servicing Woodward equipment and associated scope of supply. Consults with engineering to resolve problems in order to meet or exceed customer expectations. Prepares concise service/warranty reports and other relevant job-related paperwork for customers and internal distribution in a timely manner. Discusses product improvement opportunities and customer feedback with engineering and management and may take ownership of follow up actions. Ensure that open items remaining after returning from job site are properly communicated or handed-over to the appropriate parties and provide input to resolving open items. Other Essential Functions: Works with customers and field service dispatchers/supervisors to define timeline and travel logistics and to provide accurate project cost quotes. Periodically performs corrective and preventative maintenance of installed equipment. May be responsible for supporting customer service contracts. While in the office between field service assignments, the engineer will: Assist engineers with projects, perform Product testing, participate in project Kick Off and lessons learned meetings with engineering, sales and customers; conduct internal and customer training, assist the Technical helpdesk/hotline with answering customer and distributor questions Propose departmental improvement activities and take initiative to improve the overall efficiency of the group. Participation in 24 hours at site on-call service. May involve supervision responsibilities. May be stationed at customer site permanently or for extended period of time. Knowledge Skills & Abilities: Strong understanding of Woodward products and applications. Strong ability to work with personal computers and various software applications. Strong ability to understand and apply abstract system concepts. Able to meet customer needs in difficult and demanding situations and mentor lower level Field Service Engineers. Strong knowledge in specialized technical field or product family or wide spectrum of general knowledge. Ability to work independently and also lead and mentor lower level engineers. Strong English verbal and written communication skills. (reports, procedures, etc.). Ability to work effectively under tight deadlines and pressure. Competent skills in complex problem solving and trouble-shooting, sometimes with incomplete information. Ability to effectively communicate with different types /levels of people (technicians and clients, various cultures). Demonstrated ability to identify continuous improvement opportunities to improve efficiencies of work. Education: Degree in Engineering Electronic /Instrumentation or Mechanical Experience: 10 years + experience in relevant field and similar industry
Supports the administration of one or more strategic programs. Executes assigned project actions, RFQs and Purchase Orders (POs) in support of all requirements and in compliance with internal and external requirements, including government regulations when applicable. Includes engagement with supply base, reporting status, tracking purchased items to stock and payment. Engages with suppliers as required to expedite critical issues involving the procurement of services, materials, supplies or products. Supports the parts Transition to Production process. Monitor progress and timing to ensure deliverables are met at PLC gateways. Responsible for deliverable completion and escalates issues preventing completion to PLC Sourcing Project Manager. Responsible for tactical completion of part transition. Facilitates Production Part Approval Process (PPAP) from order placement through approval. Includes engagement with suppliers, Operations and Engineering for corrections, missing elements, engineering changes or other gaps preventing process completion, as required. Understands PPAP process, and addresses issues where supplier gaps exist. Facilitates resolution on open issues, mitigates issues and risks when possible or escalates for support as appropriate. In PLC Sourcing, facilitates and escalates any changes impacting cost and delivery, inventory and project Sourcing Strategy. In PLC Sourcing and where necessary, consults with Sourcing Project Manager for support or escalation. Enters and maintains quote detail in appropriate business system. Initiates and tracks all requests for quotes (RFQs) for purchased materials required for projects. Ensures RFQs are in alignment to Design to Cost (DTC) volume requirements as well as prototype needs. Escalates concerns where there are gaps to Sourcing Strategy and project milestones. Communicates cost changes and cost drivers that impact ability to achieve cost targets with both supplier and project team. Escalates concerns and facilitate cross team discussion to resolve or understand cost issues. Contributes to PLC projects as a Global Sourcing representative to ensure continuous communication and collaboration with the PLC Sourcing Project Manager and project teams to successfully manage changing project needs and support implementation and execution of a project Sourcing Strategy and ultimate transition to production. Read and execute MRP to meet schedule requirements and manage exceptions outside of the MRP environment or escalate for support. Ability to perform source and cost justifications or escalation for support when necessary for these functions. Administrative Responsibilities for Asia Sourcing Office in Pune (Liaison with other locations to represent Pune Location) Plans, organizes, coordinates, and maintains all aspects of travel arrangements domestic and international. (Assist/ Guide overseas Members for Travel plans) Perform department functions (Analysing data, reporting metrics etc.) Coordinates special meetings and events requiring preparation of meeting materials and logistics (may include global coordination) Responsible for QDRC metric management. Support continuous improvement. As required, participates in Supplier Business Reviews.
Position Purpose: A Cost Engineer will support Woodward, Inc. with the cost impact and direction of existing and new product designs, as well as, any design proposal or change made to existing product(s). The individual will bring a wealth of manufacturing process and design knowledge to be able to influence the design of a product based on the cost analysis. This role will support the basis of developing the cost objectives and financial viability for new products as well as coordinating the development of product cost data with the various financial functions within the organization. The individual will be a resource for cost information for the entire organization (upper management, sourcing, marketing, sales, engineering, financial, manufacturing, etc). This position requires a low level of supervision. Essential Functions: Interfaces with engineering, purchasing, manufacturing, and assembly and test to understand and communicate design to cost bill of material structure, cost requirements, and actions to be addressed by the project team. Performs cost analysis (aPriori) to identify potential cost reductions and recommend changes. Participates as a project team member in meetings and reviews, including PLC Gate meetings. Performs other product cost analysis and provides guidance as required. Provides Sourcing / Engineering / Manufacturing with Project/Product cost data as requested. Collaborates with designers and manufacturers to achieve desired cost objectives. Participates in cost reduction programs as required. Routinely updates management on status of projects. Supports company wide Should Cost modeling program implementation. Other Essential Functions: Provides direction and opportunities to manage, reduce, or control product costs based on data analysis, manufacturing, and process knowledge. Participates and supports the development and execution of One Woodward processes and procedures, and Continuous Improvement (CI) activities as required. Works to create and enhance costing and analysis tools and documentation guidelines to improve processes. Actively drive lean projects utilizing Six Sigma and lean tools. Provide DTC/CTC or other product cost related training to other Woodward members. Knowledge Skills & Abilities: Ability to read and understand engineering drawings and Bills of Material (BOM). Good understanding of manufacturing processes Basic use of DFSS tools and methodologies; Basic knowledge of engineering quality systems (PLC, engineering change, configuration management) Ability to compile and analyze multiple sources of data and identify relevant data so that a single best course of action can be taken General knowledge of cost accounting practices and reporting systems Basic project management skills Good written and verbal communication skills. Ability to communicate effectively across all levels of the organization and excels in communicating with individuals and groups Builds and maintains effective working relationships with internal and external stakeholders Ability to step up to conflicts and seeing them as opportunities, while keeping an eye on overall objectives Ability to effectively determine product target cost projections through data mining and the application of solid judgment Solid PC skills including proficiency in MS Office, advanced knowledge using Excel. General knowledge and comfortable working with ERP systems Demonstrates accuracy, thoroughness and organizational skill in performing work assignments Capable of organizing and prioritizing multiple tasks Basic understanding and experience with supplier negotiations Able to read and understand blueprints, Engineering documentation, and Geometric Dimensioning & Tolerancing, etc. Working knowledge of Casting/Forging and Machining operations Education: Bachelor of Engineering (Mechanical) Experience: Experience in a related field (Manufacturing, Manufacturing Engineering, Purchasing, Engineering) License & Certifications: Continuous Improvement certification (Lean, Green Belt, Black Belt, etc.)
Position Purpose: The Staff Application Engineer reports to the Engineering Leader and is responsible for providing a moderate to high level of mentoring to other Engineers and for participation in process improvements, strategic planning and presentations. This position works under a low level of supervision with a high level of independent work. The Staff Application Engineer provides awareness and understanding of overall project portfolio, interactions and issues. This position has a high level of industry/Customer contact and industry awareness. In addition, this position participates in enterprise negotiation and provides technical evaluation of new opportunities evaluation of customer requirements, specifications, and proposals within the PLC process. Essential Functions: Creates and updates BOM's, wiring diagrams, drawings, electrical schematics, test plans, training material, creation of O&M manuals for the customer, WISE and EFMS as necessary to support the project/team. Coordinates project milestones/project scope and ensures activities associated with the PLC process and department level procedures are adhered to for check-in to WPDS, EFMS and WISE. Lead design reviews both internally and with customers to resolve technical and programming issues. Creates and accountable for robust/reliable test plans for V&V efforts. Participate and perform action items as a team member or lead projects involving other engineers and cross-functional team members The engineer will be responsible to mentor and assist level 1 and 2 engineers in the startup of the new product/system along with field service personnel after factory testing has concluded. Engineer will regularly interface with customers, sale reps, vendors, project/program managers, and field service personnel. May be viewed as a company expert in one or more (disciplines) or products. Will be accountable for engine calibration - full ability to troubleshoot/analyzes system level problems. May be viewed as a company expert in one or more (disciplines) or products. Will lead and direct with the PM, international and multi-site projects including resource allocation and assignment. Lead projects for analyzing and sizing of third party internal/external products and definition. Understanding of functionality and interface to WW systems and components. Includes setup, SW programming and debug. Will be inclusive of items such as HMI, Cabinets, SW, XXX) Participant in strategic planning activities which include roadmap creation with PLM's and customer opportunity development with sales teams. This includes customer needs assessment for technical feasibility, system/LRU selection (scope of supply), leading technical proposals and full architecture development. Provide support to customers and the Customer Service group on more complex challenges to maintain existing designs and resolve customer field issues Create application or system level product specifications, software, and application literature for Major Scope Projects/Systems. This includes items such as ISS, Compliance Matrix, MVP's, IAFMEA, DOSO's, customer manuals and technical specifications for custom or standard designed products/applications. Will propose and evaluate new approaches to problems encountered by the project team. Promotes and implements process improvements company-wide. Champions process in specific product development areas Fully proficient with GAP software and associated operator interface/HMI software to support test setups and debug recommendations and support all GAP changes. Capable to structure GAP into functional modules and re-usable objects, e.g. core modules. Identification of new tools/instrumentation to met project/customer needs. Full participation in strategic and innovation path for both applications and systems projects/programs, which requires authoring technical papers, patents, Intellectual Property and participation in external councils. May oversee emissions certification support or regulatory compliance support for products and systems. The engineer will work directly with and provide technical oversight to the project team members on issues such as; engine calibration, engine mapping and performance calibration. Will write or co-author papers with other engineers/companies or complete complex research assignments requiring the development of new or improved techniques and procedures. Supports planning, technical input for projects and coordinates for major project or in a total project system of moderate scope, which may include project management as well as engineering tasks. Provide direction to other disciplines within the manufacturing/NPI process to bring designs to completion. These disciplines include operations, procurement, planning, program management, test, outside vendors, etc. Will direct cross-plant and 3rd party activities including the creation of milestones and identification of contract support needs (HMI, Cabinets, SW, XXX)and global resource, and supplier selection. Responsible for the successful technical integration and implementation including oversight of makeLRU's and buyLRU's (hardware/software). Mentor for local or global engineers and handle multiple resources an/or interns to keep programs running efficiently. Expert in understanding of third party products used in Woodward and customer systems. This requires market based research, competitive analysis, selection and definition. Inputs to marketing specification for roadmap and prioritization product as needed for system integration to Woodward and other system level hardware. Other Essential Functions: May be requested to be involved in missions for other functions such as: Field Service as needed, initial investigation for returned unit, Help desk, manual translation, drafting, customer training, etc. Research and provide marketing technical analysis and market based research of new technologies and competitive analysis. Simulation & Modeling. Training Woodward members. Knowledge Skills & Abilities: Effective time management skills. Ability to effectively operate in the project team environment and communicate with customers. Assists with the development of department and organization procedures. Effective written and verbal communication skills including presentations, (Customer, internal and management). Writes and communicates critical reports. Leads complex design reviews, internally and Customer. Expert technical writing skills (procedures, reports, proposals, etc.) May write and present technical papers at Conferences/Industry events. Highly refined communications skills-- represents Woodward in the industry. Proficient written and verbal communication skills in English. Competent complex problem solving/troubleshooting skills for both components and subsystems. Competent in the use of PCs and associated software. Competent knowledge of appropriate WISE applications such as BOM, Item Master, NCR, Warranty, EC screens and part tracking. Strong knowledge of standards and the ability to apply complex groupings of standards into designs. Ability to quickly learn, interpret and apply new standards. Complete understanding of component functions and testing requirements and relationship to system interaction and validation. Understands manufacturing processes, drawings and standards. Applied knowledge of design tools, strong use of and reinforcement of DFSS tools and methodologies; competent knowledge of Engineering quality systems (PLC, engineering change, configuration management). Has company recognized expertise and may have industry recognized expertise. Demonstrates leadership skills; ability to drive results across organizational boundaries. Demonstrates strategic, long-term process and planning. Can evaluate all components of a complex system and provide solutions. Provides necessary guidance for proper analysis. Can verify validity of analysis. Ability to strategically prioritize based on business needs. Recognizes Woodward's business objectives and strategies; ability to balance activities which can result in strong financial impact. General knowledge about international hardware standards and design rules. Education: US Master's degree in Arts/Sciences (MA/MS) US Bachelor's Degree in Arts/Sciences (BA/BS) Experience: Relevant experience Application Engineers use customer/ end-user input and sales information to design or re-design, develop, test and implement complex software programs and applications. They also provide technical support and expertise to customers, testing applications, responding to customer feedback, installations, maintenance and often performing sales presentations and demonstrations. Application Engineers reach across many departments, working with the engineering team, the sales team, the customer service team and the manufacturing team. ACCOUNTABILITIES & RESPONSIBILITIES Responsible for; Attending KOM, Planning, Design, Engineering of Turbine Controls & Compressor System. Preparing BOM (Bill of Material). Conduct FAT & SAT. Project commissioning & documenting the project details. Talk to customer or end user and collect detailed information/Specification on actual site requirement. Providing training to customers/end-users. Provide Supervise and training internal staffs or Members of project team. Learn latest & upgraded products/controls to support clients effectively. Providing on call support during emergency site conditions. Jointly working with field service team in attending Field service/ commissioning and documenting the project details. ADDITIONAL RESPONSIBILITIES Collect the potential database for our service/sales business and submit to concern department heads. (like spares requirement, RTR Scope, PMS Requirement, up gradation possibilities etc...) Collect details of potential sites available nearby and convey to the marketing head for his team to visit and make business. IN-HOUSE Repair/testing controllers received from Clients. Assisting sales / Service Team for clarification on technical aspects. JOB DIMENSION No. of projects, commissioning, field services, handled & completed successfully.
Woodward is looking for Intern to join our dynamic team and embark on a rewarding career journey Support the team with daily tasks, research, and documentation while gaining practical exposure to industry practices Assist in project execution, data collection, and report preparation under supervision Participate in meetings, training sessions, and brainstorming activities to enhance learning and contribute fresh ideas Ensure timely completion of assigned tasks with accuracy and professionalism Collaborate with colleagues, adapt to feedback, and uphold organizational policies and standards Demonstrate eagerness to learn, develop new skills, and build a foundation for future career growth
Position Purpose: This position is a Functional Project Manager in the area of Sourcing. The Functional Project Manager is accountable for the planning, directing, and execution of local and/or global projects. The Functional Project Manager is responsible to direct the project team to achieve project deliverables including contractual and business objectives while ensuring satisfaction and QDRC. Essential Functions: Tactical Responsibility: Coordinate/lead multiple projects of med-high complexity, multiple sub-projects, and/or cross location Lead and present project updates for management reviews, provide written updates, and status reports Drives risk management process Drives schedule performance to meet commitment dates Plans, reviews, and improves project cost Drives total cost of ownership processes Project resource management Manages across business and departments outside of specific functional area to break down barriers that may prevent project success Strategic Responsibility: Presents and represents project status to customer and Woodward managers Participates in enterprise trade-offs between projects Provide mentoring and consultation to other project managers Participate in strategic planning/profit planning processes Accountable for scope change management: responsible to orchestrate with the accountable leaders and team to be responsive to customers, project schedule, and deliverables Evaluate and implement continuous improvement. May include authoring documents and standards Coordinates project activity with appropriate leaders, team members, and customers Other Essential Functions: Evaluate and drive implementation and maintenance of appropriate project management tools May also provide support in other business activities Coordinates with Supplier Manager to act as the primary point of contact for the project Accountable for Global Sourcing Part Transition process compliance through 109 Assure supplier development, inventory transition planning, contractual alignment (POs and LTA) Leverage all Global Sourcing groups to minimize total investment Participate in commodity strategy development Collaborate with engineering and the COE to assure security of supply, high quality, competitively priced components Lead project gate reviews Provide support and assist in supplier approval process Performs Project Management role/coordination for limited Quality Management activities for multiple facilities Drives and coordinates CACs and CABs. Trains and coaches others for CACs and CABs Knowledge Skills & Abilities: Good knowledge of project management tools (specifically MS Project, Work Breakdown Structure). Proficient understanding of Woodwards Key business processes and metrics Good knowledge and demonstrated execution of the part transition process Good knowledge of strategic sourcing principles, supplier relationship management, and commercial management Knowledge and experience with core global sourcing business processes and systems Experience: Experience in specific functional area (Sourcing) Project Management License & Certifications: PMP (Project Management Professional) certification or international equivalent PMP Certification added advantage.
What You Will Be Doing Performs and may be asked to lead ITCC (Integrated Turbine and Compressor Controls) application software core development/enhancement , Simulation development, validation and timely completion of the tasks assigned. He/she collaborates with product line managers, all regions ITCC SMEs, collects all the requirements, issues/bugs, prioritize based on business needs and communicates progress on regular intervals. He/She will support other disciplines within the NPI/Product Structuring and manufacturing process to bring designs to completion. Creates and updates BOMs, wiring diagrams, drawings, electrical schematics, test plans, training material, creation of O&M manuals for the customer, WISE and EFMS as necessary to support the project/team. Coordinates project milestones/project scope and ensures activities associated with the PLC/Gate process and department level procedures are adhered to for check-in to WPDS, EFMS and WISE. Attend or possibly lead design reviews both internally and with customers to resolve technical and programming issues. Creates and executes test plans for V&V efforts. Participate and perform action items as a team member or lead projects involving other engineers and cross- functional team members The engineer will be responsible to mentor and assist level 1 and 2 engineers in the startup of the new product/system along with field service personnel after factory testing has concluded. Engineer will regularly interface with customers, sale reps, vendors, project/program managers, and field service personnel. May be viewed as a company expert in one or more (disciplines) or products. Will participate in international and multi-site projects. Participate or lead projects in analyzing and sizing of third party internal/external products and definition. Understanding of functionality and interface to WW systems and components. Includes setup, SW programming and debug. Will be inclusive of items such as HMI, Cabinets, SW etc., Support the commercial group in proposal creation, technical support commercial offers, and customer presentations. Create product specifications, software, and application literature for Minor Scope Projects/Systems. This includes items such as ISS, Compliance Matrix, MVPs, IAFMEA, DOSOs, customer manuals and technical specifications for custom or standard designed products/applications. Will be required to propose new approaches to problems encountered by the project team. Provide support to customers and the Customer Service group to maintain existing designs and resolve customer field issues. May look to opportunities to co-author papers with other engineers complex or novel research assignments requiring the development of new or improved techniques and procedures. Promotes and implements process improvements company-wide. May champion process in specific product development areas. Fully proficient with GAP software and associated operator interface/HMI software to support test setups and debug recommendations and support all GAP changes. Competent use and understanding of design tools, basic use of DMAIC/DFSS tools and methodologies; competent knowledge of Engineering quality systems (PLC, engineering change, configuration management). Ability to run existing standard tools (e.g. GAP, NetSim, Toolkit, Cimplicity, Matlab, Simulink) Participate in company marketing and sales activities, and industry technical meetings and conferences