Job description VMC OPERATOR JOB RESPONSIBILITIES Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description – other tasks may be assigned and expected to be performed. Performs daily equipment maintenance inspections including but not limited to lubrication; fluid checks and additions; chip handling; scrap removal; etc. Per the Production Process. Performs program loading and verification procedures as required through DNC; USB; interfaces, etc. Performs CNC and ancillary equipment setup; run; and teardown operation procedures to assigned specifications inclusive of bar feeders, tool setups, collet changes, chuck jaw boring, tool touch-off, etc. Performs CNC cycle starts and stop procedures accurately and efficiently. Performs single step procedures through CNC program and Control Turret. Performs tool insert changes at predetermined intervals accurately and efficiently. Performs material loading of equipment including CNC’s, chucker, bar feeders, and ancillary equipment. Performs efficient teardown of previous setups through selective removal of unnecessary items. Performs edge breaking and de-burring operations as required per operational procedures. Accurately locates and verifies proper tools and tool inserts for operation of prescribed CNC program. Accurately reads and interprets production prints; measuring devices; performs quality checks on product. Gathers and measures parts as produced by CNC operations. Reports immediately to supervision or designee all operational malfunctions including but not limited to equipment failures; equipment damage; scrap; etc. Other tasks/functions as assigned. · Performs multi-axis machining operations with high precision to operate and maintain machine, right angle heads, facing heads, inspection probe, jib crane, tool attachments, all types of fixtures, any and all set-up equipment, tool setter, tool holders, precision measuring instruments, power tools and any hand tools necessary for the fulfillment of job duties. · Works with programmer to develop and test run programs. Proof reads programs and notifies supervisor/programmer of potential problems. · Positions and secures work piece and fixtures on table. · Obtains drawings and tools from the crib and verifies the tools are correct for the application and matches the tools called for in the program(s). · Assembles tooling as required. · Uses higher math and engineering theories to work with tooling engineers to devise optimum tooling design and practices. · Directs and assists crane operator with the rigging and moving of parts to load and unload machine. · Performs final inspection of features using both the inspection probe and precision measuring equipment. · Cleans and deburrs job as necessary. Attaches seals and protective covers as required · Performs minor maintenance on machine, attachments, and tooling as required. · Keeps equipment and work area clean and orderly. · Verifies identity and physical characteristics of materials as required. · Maintains necessary records and completes process documentation and any other production records as required. Identifies equipment and product as required. Requirements: High School Diploma or equivalent. Technical/Mechanical coursework. Skill in operating CNC machinery. 1 to 2 years manufacturing related experience. Good verbal and written communication skills. Sets up and operates machine tools such as CNC mills. Ability to use and accurately read blueprints and measure using devices such as calipers, micrometers, etc. Must be accurate and exhibit diplomacy and tact in dealing with others. Ability to input to and retrieve from computer-based software programs. Ability to spell, type, and read at an average speed. Can prioritize the work and coordinate with others. Self-motivated and can work with little supervision. Able to multi-task in a fast-paced environment. Able to solve problems and determine a course of action. Troubleshoots and anticipates problems. Capable of fostering a team environment. Supports complex customer’s needs/requests. Exhibits a sense of urgency to get the job done. Salary :- Rs.12,000/- to Rs.18,000/- Job Type: Full-time Pay: ₹12,000.00 - ₹18,000.00 per month Work Location: In person Application Deadline: 04/07/2025 Expected Start Date: 07/07/2025
Job Description As an MIS (Management Information Systems) Executive, you are required to work with Data: This role is a role for professionals who are good with numbers Knowledge of Excel (vlookup, pivot table, charts) is a must Must be able to create reports using data preference will be given to who knows Macro . The job profile is of IT ADMIN cum MIS executive the candidate should have ready to work as Admin work along with soft services activities Experience in understanding business needs to develop visual analytics. Strong knowledge in domains of Environmental Data, Process understanding, Data Analytics, Supplier management & Change management. Strong knowledge & experience Product Lifecycle Management. Knowledge of tools like Advance Excel (Power Query) Should have the ability to work with POs & BA to review and discuss the functional specifications of the User stories. Qualifications Minimum 3 years' of experience in Power Query B.Tech in Computer Science or related fields Strong decision-making, analytical, and communication skills Salary: ₹15,000.00 - ₹25,000.00 per month Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 25/07/2025 Expected Start Date: 01/08/2025
Job responsibilities of Electrician Install and maintain electrical wiring, control, and lighting systems (e.g., switches, resistors, circuit-breaker panels, other safety and distribution components) Inspect, repair, and replace electrical components and equipment such as wiring, fixtures, insulated cables, transformers, and circuit breakers Perform general electrical maintenance and corrective/preventive maintenance on electrical systems, electrical panels, and circuits Inspect, test, diagnose, troubleshoot, and repair electrical system issues, safety hazards, and malfunctions Follow the National Electrical Code, state and local building regulations, and safety procedures for every installation and repair Manage job details, review daily tasks. Qualifications and skills: Electrician license Successful completion of an electrician apprenticeship program Good understanding of electrical theory Able to perform basic mathematical calculations Able to sit, stand, kneel, climb, lift, and climb stairs and ladders Strong organizational and problem-solving skills Strong work ethic and positive attitude Can work independently and as part of a team environment Can communicate well (multiple languages are a plus) Salary :- Rs.15000/- to Rs.16000/- per month. ESI & PF Applicable Job Type: Full-time Pay: ₹15,000.00 - ₹16,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 31/07/2025 Expected Start Date: 01/08/2025
Job responsibilities of Electrician Install and maintain electrical wiring, control, and lighting systems (e.g., switches, resistors, circuit-breaker panels, other safety and distribution components) Inspect, repair, and replace electrical components and equipment such as wiring, fixtures, insulated cables, transformers, and circuit breakers Perform general electrical maintenance and corrective/preventive maintenance on electrical systems, electrical panels, and circuits Inspect, test, diagnose, troubleshoot, and repair electrical system issues, safety hazards, and malfunctions Follow the National Electrical Code, state and local building regulations, and safety procedures for every installation and repair Manage job details, review daily tasks. Qualifications and skills: Electrician license Successful completion of an electrician apprenticeship program Good understanding of electrical theory Able to perform basic mathematical calculations Able to sit, stand, kneel, climb, lift, and climb stairs and ladders Strong organizational and problem-solving skills Strong work ethic and positive attitude Can work independently and as part of a team environment Can communicate well (multiple languages are a plus) Salary :- Rs.15000/- to Rs.16000/- per month. ESI & PF Applicable Job Type: Full-time Pay: ₹15,000.00 - ₹16,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 31/07/2025 Expected Start Date: 01/08/2025
Job Description of Plastic Molding Shift Incharge (1.) Manage the overall activities of the molding department including but not limited to production, processing, machine maintenance and tool maintenance and repair. (2.) Direct and coordinate planning and scheduling of molding manufacturing with the Upper-Level Management to consistently meet expected product delivery schedules and inventory levels. (3.) Responsible for assuring the efficient use of materials, machines, molds, auxiliary equipment and employees. (4.) Responsible for the development and implementation of both the long- and short-term goals for the Molding Department. (5.) Perform mold set up and color changes to meet production demands as needed. (6.) Troubleshoot mold processes, machines, and auxiliary equipment problems and make necessary changes to ensure quality and reduce downtime. (7.) Set molding process parameters to ensure product meets dimensional and quality requirements. (8.) Provide technical assistance to molding technicians and operators (9.) Maintain employee performance review, training, development and disciplinary programs. (10.) Provide leadership in the maintenance of all operational systems and process controls associated with mold processing, mold maintenance, equipment maintenance and repair. (Documented mold set ups, process intervention logs, product dimensional and visual evaluations supporting product requirements, product validations, etc.). (11.) Assure compliance to all molding area related procedures, policies and work instructions. (12.) Participate in and support the Quality Management System. (13.) Train and develop molding personnel relative to the molding process (Process technicians and molding operators), promote employee understanding and adherence to safety regulations and the Quality Management System. (14.) Document, report and maintain all critical production information. (15.) Support new tool design and development. (16.) Coordinate with toolroom for repair and sourcing mold spares. Qualifications Diploma/ B-Tech from CIPET in Plastic Technology/DPMT Experience Minimum of 7 years Plastic Injection Molding experience with at least 3 years in a lead technical or mold department management role. Salary :- Rs.18,000/- to Rs.30,000/- per month. Job Type: Full-time Pay: ₹18,000.00 - ₹30,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 31/07/2025 Expected Start Date: 01/08/2025
Job Description of Plastic Molding Shift Incharge (1.) Manage the overall activities of the molding department including but not limited to production, processing, machine maintenance and tool maintenance and repair. (2.) Direct and coordinate planning and scheduling of molding manufacturing with the Upper-Level Management to consistently meet expected product delivery schedules and inventory levels. (3.) Responsible for assuring the efficient use of materials, machines, molds, auxiliary equipment and employees. (4.) Responsible for the development and implementation of both the long- and short-term goals for the Molding Department. (5.) Perform mold set up and color changes to meet production demands as needed. (6.) Troubleshoot mold processes, machines, and auxiliary equipment problems and make necessary changes to ensure quality and reduce downtime. (7.) Set molding process parameters to ensure product meets dimensional and quality requirements. (8.) Provide technical assistance to molding technicians and operators (9.) Maintain employee performance review, training, development and disciplinary programs. (10.) Provide leadership in the maintenance of all operational systems and process controls associated with mold processing, mold maintenance, equipment maintenance and repair. (Documented mold set ups, process intervention logs, product dimensional and visual evaluations supporting product requirements, product validations, etc.). (11.) Assure compliance to all molding area related procedures, policies and work instructions. (12.) Participate in and support the Quality Management System. (13.) Train and develop molding personnel relative to the molding process (Process technicians and molding operators), promote employee understanding and adherence to safety regulations and the Quality Management System. (14.) Document, report and maintain all critical production information. (15.) Support new tool design and development. (16.) Coordinate with toolroom for repair and sourcing mold spares. Qualifications Diploma/ B-Tech from CIPET in Plastic Technology/DPMT Experience Minimum of 7 years Plastic Injection Molding experience with at least 3 years in a lead technical or mold department management role. Salary :- Rs.18,000/- to Rs.30,000/- per month. Job Type: Full-time Pay: ₹18,000.00 - ₹30,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 31/07/2025 Expected Start Date: 01/08/2025
Quality Executive – Production & Manufacturing Job description 1. Verifying compliance of parts as per drawings. 2. Verifying that the documentation as per QMS requirements and records are maintained and retained. 3. Conducting products and process audits at supplier end. 4. Authority to line stoppage in case of NC products. 5. Monitoring product identification and traceability requirements. 6. Upgradation of supplier through training, technical support, system guidance, Audits and interaction and monitoring. 7. Input data updating to TCS ERP Team. Quality System 1. Ensure QMS is defined in practice ISO 2. Daily team meeting 3. Ensures serviceability, calibration of inspection and test equipment at all times. 4. Ensures continual improvements and process review and change 5. Ensure design, review and documentation of QMS. 6. Ensures customer specific requirements are identified and communicates throughout the org. 7. Process mapping throughout the org. 8. Ensures control over QMS documentation. Minimum Educational Qualifications :- Diploma in Mechanical Engg. (Freshers , Experienced all can apply) Salary :- Rs.10,000/- to Rs.15,000/- per month Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 10/08/2025
Quality Executive – Production & Manufacturing Job description 1. Verifying compliance of parts as per drawings. 2. Verifying that the documentation as per QMS requirements and records are maintained and retained. 3. Conducting products and process audits at supplier end. 4. Authority to line stoppage in case of NC products. 5. Monitoring product identification and traceability requirements. 6. Upgradation of supplier through training, technical support, system guidance, Audits and interaction and monitoring. 7. Input data updating to TCS ERP Team. Quality System 1. Ensure QMS is defined in practice ISO 2. Daily team meeting 3. Ensures serviceability, calibration of inspection and test equipment at all times. 4. Ensures continual improvements and process review and change 5. Ensure design, review and documentation of QMS. 6. Ensures customer specific requirements are identified and communicates throughout the org. 7. Process mapping throughout the org. 8. Ensures control over QMS documentation. Minimum Educational Qualifications :- Diploma in Mechanical Engg. (Freshers , Experienced all can apply) Salary :- Rs.10,000/- to Rs.15,000/- per month Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 10/08/2025
Accountant (Dhulagori) responsibilities include: Posting and processing journal entries to ensure all business transactions are recorded Updating accounts receivable and issue invoices Updating accounts payable and perform reconciliations. Post and process journal entries to ensure all business transactions are recorded. Update accounts receivable and issue invoices. Update accounts payable and perform reconciliations. Assist in the processing of balance sheets, income statements and other financial statements according to company accounting and financial guidelines. Assist with reviewing of expenses, payroll records etc. as assigned. Update financial data in databases to ensure that information will be accurate and immediately available when needed. Prepare and submit weekly / monthly reports as and when required. Assist senior accountants in the preparation of monthly / yearly closings. Assist with other accounting projects namely GST, TDS etc. Reconcile various bank accounts by compiling and balancing financial information. Maintains accounting records of subsidiary branches using balance sheet analysis and general ledger accounts Helps secure sensitive financial data by assisting other team members with database creation and maintenance Corrects accounting errors and posts journal entry adjustments Prepares fixed asset depreciation and accruals. Determines the financial status and health of various organizations and businesses Updates and maintains general ledger accounts by keeping close track of accounts receivable details and control accounts Expands knowledge base by participating in educational programs and reading accounting publications Completes other accounting tasks as needed Requirements and skills Proven experience as a accountant Excellent organizing abilities Great attention to detail Good with numbers and figures and an analytical acumen Good understanding of accounting and financial reporting principles and practices Relevant knowledge of MS Office and familiarity with relevant computer accounting software. A Graduate in Commerce (B. Com) with specialization will be an added advantage Salary :- Rs.15,000/- to Rs.20,000/- Job Type: Full-time Job Type: Full-time Pay: ₹15,000.00 - ₹20,000.00 per month Schedule: Day shift Application Deadline: 21/08/2025 Expected Start Date: 25/08/2025
Job description Quality Executive – Production & Manufacturing Job description 1. Verifying compliance of parts as per drawings. 2. Verifying that the documentation as per QMS requirements and records are maintained and retained. 3. Conducting products and process audits at supplier end. 4. Authority to line stoppage in case of NC products. 5. Monitoring product identification and traceability requirements. 6. Upgradation of supplier through training, technical support, system guidance, Audits and interaction and monitoring. 7. Input data updating to TCS ERP Team. Quality System 1. Ensure QMS is defined in practice ISO 2. Daily team meeting 3. Ensures serviceability, calibration of inspection and test equipment at all times. 4. Ensures continual improvements and process review and change 5. Ensure design, review and documentation of QMS. 6. Ensures customer specific requirements are identified and communicates throughout the org. 7. Process mapping throughout the org. 8. Ensures control over QMS documentation. Minimum Educational Qualifications :- Diploma in Mechanical Engg. (Freshers , Experienced all can apply) Salary :- Rs.10,000/- to Rs.15,000/- per month Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Schedule: Day shift Application Deadline: 31/08/2025 Expected Start Date: 01/09/2025
Job description Quality Executive – Production & Manufacturing Job description 1. Verifying compliance of parts as per drawings. 2. Verifying that the documentation as per QMS requirements and records are maintained and retained. 3. Conducting products and process audits at supplier end. 4. Authority to line stoppage in case of NC products. 5. Monitoring product identification and traceability requirements. 6. Upgradation of supplier through training, technical support, system guidance, Audits and interaction and monitoring. 7. Input data updating to TCS ERP Team. Quality System 1. Ensure QMS is defined in practice ISO 2. Daily team meeting 3. Ensures serviceability, calibration of inspection and test equipment at all times. 4. Ensures continual improvements and process review and change 5. Ensure design, review and documentation of QMS. 6. Ensures customer specific requirements are identified and communicates throughout the org. 7. Process mapping throughout the org. 8. Ensures control over QMS documentation. Minimum Educational Qualifications :- Diploma in Mechanical Engg. (Freshers , Experienced all can apply) Salary :- Rs.10,000/- to Rs.15,000/- per month Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Schedule: Day shift Application Deadline: 31/08/2025 Expected Start Date: 01/09/2025
As a Tool & Die Maker, you will be responsible for manufacturing new plastic injection moulds and press tool dies according to design specifications and drawings. Your duties will include conducting preventive and breakdown maintenance on tools, replacing worn-out parts, and assembling tool components with precise fitting and tolerance control. Operating various tool room machines such as milling, surface grinding, drilling, EDM/WEDM, lathe, and CNC will also be part of your daily tasks. You will be required to use precision instruments like micrometers, height gauges, and dial gauges to check individual tool parts for dimensional accuracy. Additionally, you will assist in mould/die trials, address tool-related issues during production, and maintain tool history records, service logs, and tool modification reports. Providing feedback to the design and production teams for tool improvements and productivity enhancement will be essential. To excel in this role, you should possess proficiency in reading and interpreting 2D/3D tool drawings and GD&T symbols, as well as skills in using hand tools and measuring instruments. Hands-on experience with tool room machinery such as CNC, EDM, surface grinding, and a good understanding of tool steels, heat treatment, and die life cycle are required. Basic knowledge of plastic flow and die casting behavior, along with exposure to mould flow analysis or die simulation software, would be advantageous. Problem-solving skills, attention to detail, and precision working are qualities that will help you succeed in this position. Adhering to all tool room safety protocols and contributing to 5S and TPM activities are vital aspects of the job. This is a full-time position with a monthly salary ranging from Rs. 15,000 to Rs. 22,000. The ideal candidate should have 1 to 2 years of relevant experience. The job offers a day shift schedule, with the application deadline set for 21/08/2025 and an expected start date of 25/08/2025.,
Job description Quality Executive – Production & Manufacturing Job description 1. Verifying compliance of parts as per drawings. 2. Verifying that the documentation as per QMS requirements and records are maintained and retained. 3. Conducting products and process audits at supplier end. 4. Authority to line stoppage in case of NC products. 5. Monitoring product identification and traceability requirements. 6. Upgradation of supplier through training, technical support, system guidance, Audits and interaction and monitoring. 7. Input data updating to TCS ERP Team. Quality System 1. Ensure QMS is defined in practice ISO 2. Daily team meeting 3. Ensures serviceability, calibration of inspection and test equipment at all times. 4. Ensures continual improvements and process review and change 5. Ensure design, review and documentation of QMS. 6. Ensures customer specific requirements are identified and communicates throughout the org. 7. Process mapping throughout the org. 8. Ensures control over QMS documentation. Minimum Educational Qualifications :- Diploma in Mechanical Engg. (Freshers , Experienced all can apply) Salary :- Rs.10,000/- to Rs.15,000/- per month Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Application Deadline: 17/09/2025 Expected Start Date: 18/09/2025
Job description Quality Executive – Production & Manufacturing Job description 1. Verifying compliance of parts as per drawings. 2. Verifying that the documentation as per QMS requirements and records are maintained and retained. 3. Conducting products and process audits at supplier end. 4. Authority to line stoppage in case of NC products. 5. Monitoring product identification and traceability requirements. 6. Upgradation of supplier through training, technical support, system guidance, Audits and interaction and monitoring. 7. Input data updating to TCS ERP Team. Quality System 1. Ensure QMS is defined in practice ISO 2. Daily team meeting 3. Ensures serviceability, calibration of inspection and test equipment at all times. 4. Ensures continual improvements and process review and change 5. Ensure design, review and documentation of QMS. 6. Ensures customer specific requirements are identified and communicates throughout the org. 7. Process mapping throughout the org. 8. Ensures control over QMS documentation. Minimum Educational Qualifications :- Diploma in Mechanical Engg. (Freshers , Experienced all can apply) Salary :- Rs.10,000/- to Rs.15,000/- per month Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Application Deadline: 17/09/2025 Expected Start Date: 18/09/2025