Location : Hyderabad Movolution Services Pvt. Ltd. is looking for an experienced Test Pilot with a proven track record of piloting multicopters and VTOL fixed-wing UAVs. The ideal candidate should have at least 2 years of on-field experience with UAV systems, particularly those based on the Cube Orange flight controller, and be proficient in using Mission Planner and QGroundControl (QGCS) for mission planning and system diagnostics. This role involves both in-field testing and technical evaluation of UAV systems to ensure optimal flight performance and safety. Responsibilities : Flight Testing: Conduct flight tests for multicopters and VTOL fixed-wing UAVs to assess their stability, performance, and mission capability in real-world conditions. Mission Planning & Execution: Use Mission Planner and QGroundControl (QGCS) to configure flight plans, monitor UAV performance during missions, and fine-tune flight parameters as necessary. Data Collection & Analysis: Collect detailed flight data and logs to assess system performance. Identify and report any discrepancies, malfunctions, or areas for improvement. System Evaluation: Test new UAV systems and configurations, including the Cube Orange-based flight controllers, to verify performance against specifications and standards. Troubleshooting & Diagnostics: Work closely with the engineering team to troubleshoot and resolve issues related to flight controllers, sensors, ESCs, and other UAV subsystems. Safety Protocols: Ensure safe flight operations by adhering to established safety protocols, providing real-time feedback on potential hazards or performance anomalies during test flights. Reporting: Document flight tests, outcomes, and recommendations for system improvements or adjustments. Provide feedback for optimization of UAV systems based on field experience. Collaboration: Collaborate with design and engineering teams to provide hands-on insights into UAV flight performance and assist in the refinement of UAV systems. Requirements : Educational Qualification: Bachelor's degree/diploma in Engineering (Electronics, Electrical, Mechanical, Aeronautical, or related fields). Freshers or candidates with up to 1-2 years of experience in UAV systems engineering are encouraged to apply. Technical Skills: Experience Hands-on experience with Cube Orange flight controller setup and configuration. Minimum 2 years of hands-on experience as a test pilot for multicopters and VTOL fixed-wing UAVs. Proven experience with Cube Orange flight controllers and understanding of UAV flight control systems. Strong knowledge and experience with Mission Planner and QGroundControl (QGCS) for mission planning and in-flight diagnostics. Technical Skills: Expertise in flying and testing multicopter and VTOL systems. Solid understanding of UAV components, including flight controllers, GPS, sensors, and actuators. Ability to interpret flight logs and telemetry data to diagnose and optimize UAV systems. Familiarity with MAVLink communication protocols and ground station software. Proficient in pre-flight setup, calibration, and post-flight analysis. Educational Qualification Bachelor's degree or equivalent experience in Aerospace Engineering, Aeronautical Engineering, Electronics, or related technical fields is preferred. Soft Skills Excellent communication skills to provide clear feedback to engineers and the development team. Ability to remain calm under pressure and make quick decisions in critical situations. Strong attention to detail and commitment to safety. Ability to work both independently and as part of a team. Location: Based in Pune, with occasional travel to remote testing locations or other company sites. Preferred Skills (Nice to Have): Experience with autonomous flight modes and UAV mission planning. Knowledge of radio communication systems used for UAV control. Familiarity with simulation tools for testing and validating flight behavior. Previous experience in UAV development or engineering roles is a plus. Benefits Competitive salary based on experience and skills. Opportunity to work with cutting-edge UAV technologies.. A dynamic and supportive work environment. Career growth opportunities with hands-on exposure to diverse UAV systems.
Location : Hyderabad We are looking for a highly motivated UAV Systems Engineer to join our team. The ideal candidate will have hands-on experience with UAV systems, including Cube Orange setup, Ardupilot configuration, and connecting various UAV peripherals. This position is ideal for fresh graduates as well as professionals with up to 1-2 years of experience in UAV system engineering. The selected candidate will undergo training in Pune before being relocated to our office in Hyderabad for regular duties. Responsibilities : Pixhawk Cube Orange Setup: Setup and configure the Cube Orange flight controller for various UAV platforms. Ardupilot Configuration: Install, configure, and calibrate Ardupilot firmware for UAV flight control, ensuring it meets performance requirements. UAV Peripherals Integration: Connect and configure UAV peripherals including GPS, IMUs, cameras, motors, servos, and sensors with the Cube Orange controller. System Testing: Conduct ground and flight tests to validate system performance, troubleshoot issues, and ensure all systems are fully operational. Diagnostics & Troubleshooting: Identify and resolve issues in hardware and software during the integration and testing phases. Documentation: Maintain detailed records of system configurations, setup processes, troubleshooting steps, and test results. Collaboration: Work closely with other engineers, including software and hardware teams, to ensure seamless integration of all UAV systems. Continuous Learning: Stay updated on industry advancements, new tools, and technologies related to UAV systems. Requirements : Educational Qualification: Bachelor's degree/diploma in Engineering (Electronics, Electrical, Mechanical, Aeronautical, or related fields). Freshers or candidates with up to 1-2 years of experience in UAV systems engineering are encouraged to apply. Technical Skills: Hands-on experience with Cube Orange flight controller setup and configuration. Proficiency in Ardupilot configuration and firmware management for UAV systems. Knowledge of integrating UAV peripherals such as GPS, ESCs, sensors, cameras, and IMUs. Familiarity with MAVLink and related communication protocols. Experience with Mission Planner or similar ground control software for UAV operations. Basic knowledge of C++/Python or other scripting languages for configuring and customizing UAV systems. Soft Skills: Strong problem-solving and analytical abilities. Effective communication skills (both written and verbal). Ability to work independently as well as part of a team. Attention to detail and a passion for hands-on work and technology. Location: Training will be held in Pune. After the completion of the training, the candidate will be relocated to Hyderabad for regular duties. Preferred Skills (Nice to Have): Experience with AeroGCS Orange/Green. Knowledge of UAV airframe design and integration. Familiarity with autonomous flight modes and UAV mission planning. Benefits: Competitive salary based on experience and qualifications. Opportunity to work on cutting-edge UAV technologies. Comprehensive training and skill development. Collaborative and innovative work environment.
Location : Hyderabad Marvel Geospatial Solutions Pvt Ltd is looking for experienced and licensed DGCA drone pilots to join our team. We are a leading provider of aerial surveying, mapping, and inspection services in the region, and we are looking for motivated and skilled professionals to help us continue our growth. Responsibilities : Conducting drone flights for aerial surveying, mapping, and inspection projects. Maintaining accurate flight records and ensuring compliance with all regulatory requirements. Performing pre-flight and post-flight checks to ensure the safety and performance of the drone. Communicating effectively with project managers and team members to ensure project success. Requirements : DGCA issued Remote Pilot License (RPL) Experience in conducting drone flights for aerial surveying, mapping, and inspection projects Strong knowledge of drone technology, flight planning, and mapping software Excellent communication and problem-solving skills Ability to work independently and as part of a team
Responsibilities (would include but not be limited to the following): Project Planning and Execution: Develop, implement, and monitor project plans for drone mapping and LiDAR projects, ensuring deliverables are achieved within agreed timelines and quality standards. Oversee project workflows to meet client expectations. Technical Scope and Estimations: Evaluate technical requirements outlined in RFPs,assess project feasibility, and prepare precise cost and resource estimations. Support business development teams with technical inputs for proposals. DGPS Surveys: Provide leadership and technical expertise in DGPS survey operations, ensuring accuracy and the seamless integration of survey data into project workflows. Team Management: Lead and manage a team of 60-75 pilots and 30-40 drone operations teams across India. Provide training, mentorship, and support to enhance team productivity and ensure operational excellence. Permissions and Clearances: Handle regulatory approvals and clearances with relevant authorities such as DGCA, Digital Sky, MoD, MHA, and local authorities. Ensure compliance with all applicable laws and regulations. Client Coordination: Serve as the primary liaison for clients, understanding their requirements, providing regular project updates, and ensuring client satisfaction throughout the project lifecycle. Operations Management: Plan and execute large-scale drone operations across diverse geographic locations. Ensure safety protocols and compliance measures are consistently followed. Resource Optimization: Effectively allocate and manage resources, including manpower, drones, and equipment, to optimize productivity and operational efficiency. Compliance and Reporting: Prepare detailed project reports for internal and external stakeholders, ensuring transparency and compliance with all regulatory and operational requirements. Problem-Solving: Proactively identify and resolve operational challenges, ensuring minimal disruptions to project timelines and deliverables. Qualifications and Skills: Bachelor's degree in Engineering, Geospatial Science, or a related field. A master's degree is preferred. 8-10 years of experience in managing drone operations, mapping, and LiDAR projects, with demonstrated expertise in DGPS surveys. Strong knowledge of DGCA regulations, flight permissions, and operational compliance requirements. Proven ability to evaluate technical scopes in RFPs and prepare cost estimations. Proficiency in geospatial data processing and the integration of LiDAR and drone survey outputs. Advanced project management skills with proficiency in tools like MS Project, Primavera, or similar. Strong leadership, communication, and client management skills. Ability to work under pressure and adapt to dynamic project demands. Willingness to travel extensively across India. Certifications: Mandatory: DGCA Drone Pilot Certificate. Preferred: PMP or equivalent project management certification.
Marvel Geospatial is looking for trainee DGCA drone pilots to join our team. We are a leading provider of aerial surveying, mapping, and inspection services in the region, and we are looking for motivated individuals to join us as we continue our growth. Responsibilities: Assisting experienced drone pilots in conducting drone flights for aerial surveying, mapping, and inspection projects. Learning how to maintain accurate flight records and ensure compliance with all regulatory requirements. Performing pre-flight and post-flight checks to ensure the safety and performance of the drone. Communicating effectively with project managers and team members to ensure project success. Requirements: DGCA issued Remote Pilot License (RPL) Strong interest in drone technology, flight planning, and mapping software Excellent communication and problem-solving skills Ability to work independently and as part of a team