Role and Responsibilities: 1 RFQ Handling through software 2 Develop and oversee the formulation of rubber compounds for various applications, ensuring they meet quality and performance standards as per customer. 3 Manage the daily operations of the rubber formulation laboratory, including scheduling, resource allocation, and budget management. 4 Lead a team of chemists and technicians in conducting research, experiments, and testing to optimize rubber formulations 5 Collaborate with cross-functional teams, including product development, manufacturing, and quality assurance, to support new product development and troubleshooting 6 Develop and implement quality control procedures to ensure consistency and reliability of rubber formulations 7 Analyze data and interpret results from laboratory experiments to make recommendations for formulation improvements. 8 Troubleshoot production issues related to rubber compound formulation, processing, rejection and performance. 9 Ensure compliance with safety protocols and regulations within the laboratory environment and raw materials.(ROHS/REACH) 10 Final autority for Formulations and RFQ 11 Customer Relationship Management 12 Daily R&D Lab Test Results review 13 Maintain accurate documentation of experiments, procedures, and test results for regulatory and internal purposes 14 Collaborate with suppliers to source and qualify new raw materials for rubber compound formulations. 15 Provide technical support and training to staff on rubber formulation techniques and equipment operations. 16 Drive continuous improvement initiatives to enhance the efficiency and effectiveness of the rubber formulation laboratory operations. 17 To prepare and maintain the list of new compound under developmnet Rationalised of current running formulations in JPPL 18 Formula Vs Specofication Matrix 19 Daily R&D Lab Test Results review 20 R&D Lab work load distribution 21 Daily complaint feedback from each production dept formula wise & compile data 22 Visit to producton Units for trouble shooting & Process review 23 Process improvement project in extrusion & Molding in cost saving to reduce the rejection unit wise. 24 IMDS Submission & Review 25 Daily trial cost tracking 26 To introduce new raw materials for compound cost saving 27 To introduce new technologies for production, development and improvement.
Role & responsibilities 1. Receipt RFQ check & upload on the portal for feasibility checking 2.follow up all concern department for the uploaded RFQ feasibility completion 3.Organize the meeting under guidance of seniors with customer to make clear the all feasibility concern for further development process 4.Prepare the Quotations as per filled feasibility & take approval from seniors & management for further sharing to customer 5.Release the Internal office memo & Coordinate internal team for the sample preparations to submit the same to customer 6. Prepare the all required documents to submit customer for further process of PO & SOP 7.Fill the all internal documents for part addition , customer addition etc for regular invoicing & monitor the same till smooth handover parts to sales team 8.Keep the files updated for daily records & submit same to management on time for review the same 9.Monitor the initial batch supplies for the smooth handover to production & avoid any concern in Future Preferred candidate profile Education Background - B.Com/M.Com/ MBA - Marketing Relevant Experience - 1-4 Years
1. Assist in controlling Final Inspection quality control for specific customers. Cutomers: TML, FIAT, PIAGGIO, YAPP, VOSS, ASHOK LEYLAND, VECV, DAIMLER, PREMEAR SEAL, TVS, VARROC, TATA TOYO, GREAVES COTTON, DENSO, SFC 2. Assist in managing daily manpower for final inspection for above customer lines as well as at outside vendors. 3. Ensuring daily tally sheet data entry ( final inspection ) in QUEST system. 4.Providing Training to new inspectors. 5.Verification of parts, gauges/fixtures, PPAP documents of parts handed over by NPD engineer. 6. Contributing in In-house rejection analysis & monitoring implementation of actions 7. Attending customer complaints ( visit to customer ) at above customers. 8. Ensuring sustenancae of actions taken against customer complaints. 9. Updation of process related documents ( WI, FMEA, CP etc )for quality. 10,. Assist in preparing Layout Inspection Report for all above customers ( as per plan ). 11. Assist in Product Audit for above customers ( as per plan ). 12. Responsible for closure of Internal and customer audit NCs by coordinating with supporting departments. 13 Arranging scrap disposal for all ( Vendor + In-house ) parts ( Excluding Silicon and Mahindra line parts ). 14. Inspection of reworked parts. 15. PDIR activity 16. Collection and handover of measurng instruments for calibration to Q.A. 17. Monitoring final line quality activities line Set-up aprovals, POKA-YOKE verification. 12. Monthly stock taking for qty. under HOLD. 13. Maintain documents related to ISO-14001 and ISO-45001 as per the laid down practices 14.Implementing IATF system at shoplfloor and closure of NC's.
Role & responsibilities 1. Receipt RFQ check & upload on the portal for feasibility checking 2.follow up all concern department for the uploaded RFQ feasibility completion 3.Organize the meeting under guidance of seniors with customer to make clear the all feasibility concern for further development process 4.Prepare the Quotations as per filled feasibility & take approval from seniors & management for further sharing to customer 5.Release the Internal office memo & Coordinate internal team for the sample preparations to submit the same to customer 6. Prepare the all required documents to submit customer for further process of PO & SOP 7.Fill the all internal documents for part addition , customer addition etc for regular invoicing & monitor the same till smooth handover parts to sales team 8.Keep the files updated for daily records & submit same to management on time for review the same 9.Monitor the initial batch supplies for the smooth handover to production & avoid any concern in Future Preferred candidate profile Education Background - B.Com/M.Com/ MBA - Marketing Relevant Experience - 1-4 Years
1. Handle all customer-specific requests Service to include: o Product Development activities 0 New product concept till final design and providing inputs as a business partner. o Consumer/Product Testing and testing concept designing and testing setup development o Product-specific and customer-specific documents 2. Serve in cross-functional roles and responsibilities in support of corporate objectives o Lead role of the Product Management Team o Participation in the Sales and Operations Planning process during new product ramp-up stage o Other duties as assigned by the VP, Top Management, Production, and QA team as and when required. 3. Responsible for Performance Evaluation Analysis. Activities to include: o Post launch Product performance validation o Customer feedback o Respective process improvements confirmation from customer and respective team o Ensure key learnings and best practices are documented and shared institutionally. o Implement improvements in project management tools and methodologies. 4. Leading the company's New Product Development Department and making sure they are recognized as an important part of the companys success through achieving customers' targeted timeline for the new product 5. Interpreting new legislation and ensuring that all relevant staff are up to speed with any amendments to make sure all products are fully compliant and as per customer requirement / as per drawing 6. Managing multiple projects and staff-related new product development 7. Ensuring all new products meet technical, drawing , production parameters 8. Processing, maintaining, and Presenting documents related to KPI and MRM as per management. 9. Monitoring and validating product manufacturing at each stage of development, sometimes even attending production / Development batches as and where required. 10 Ensuring that the Supply Chain works Smoothly and on time BOPs/toolings available on the production line to the launching schedule and starting SOP on time. 11 Due to the complexity involved in the development strategies of new products/systems, maintaining physical and digital records of the product, testing, manufacturing, and Performance record monitoring. 12 Working with internal customer service teams to answer questions and collect feedback to be used in the next phase of the new product development. 13 Supporting to Development team in their new product activity as and when required.
1. Managing overall operations with a view to ensure timely accomplishment of production targets within the time and cost parameters. 2. Overseeing production activities, implementing effective techniques to bring efficiency in operations, improve quality standards & achieve maximum cost savings. 3. Planning the production schedules on daily, weekly & monthly basis. Daily review of critical component and dispatches to Materials, BD depts. 4. To take corrective and preventive action on audit Non-Conformance. 5. Leading the 5s active workplace improvement (gemba), 6. Setting up the line speed and in turn setting up the manpower. 7. Raised the production level by implementing Toyota Way methodology. 8. Set-up the discover engine line and balancing the each stage. 9.Implementing just in time technic in shop. 10. Ensuring the availability of Material as per production plan. 11. Effectively completed the New Development Projects. 12. Cost saving & productivity Improvement projects. 13. Implementation of ISO 9001- IATF 16949: 2016 14. Implementation of ISO 14001 & OHSAS 18001. 15. Identification and action on 16 major losses, which affect O.E.E.
1. Handle all customer-specific requests Service to include: o Product Development activities 0 New product concept till final design and providing inputs as a business partner. o Consumer/Product Testing and testing concept designing and testing setup development o Product-specific and customer-specific documents 2. Serve in cross-functional roles and responsibilities in support of corporate objectives o Lead role of the Product Management Team o Participation in the Sales and Operations Planning process during new product ramp-up stage o Other duties as assigned by the VP, Top Management, Production, and QA team as and when required. 3. Responsible for Performance Evaluation Analysis. Activities to include: o Post launch Product performance validation o Customer feedback o Respective process improvements confirmation from customer and respective team o Ensure key learnings and best practices are documented and shared institutionally. o Implement improvements in project management tools and methodologies. 4. Leading the company's New Product Development Department and making sure they are recognized as an important part of the companys success through achieving customers' targeted timeline for the new product 5. Interpreting new legislation and ensuring that all relevant staff are up to speed with any amendments to make sure all products are fully compliant and as per customer requirement / as per drawing 6. Managing multiple projects and staff-related new product development 7. Ensuring all new products meet technical, drawing , production parameters 8. Processing, maintaining, and Presenting documents related to KPI and MRM as per management.9. Monitoring and validating product manufacturing at each stage of development, sometimes even attending production / Development batches as and where required.10 Ensuring that the Supply Chain works Smoothly and on time BOPs/toolings available on the production line to the launching schedule and starting SOP on time.11 Due to the complexity involved in the development strategies of new products/systems, maintaining physical and digital records of the product, testing, manufacturing, and Performance record monitoring.12 Working with internal customer service teams to answer questions and collect feedback to be used in the next phase of the new product development.13 Supporting to Development