Role & responsibilities
Lead the Electrical and Control & Instrumentation (C&I) disciplines of D&ES as their senior Technical Authority. You are accountable for the quality, schedule and man-hour performance of all electrical and C&I deliverables, from FEED through detailed engineering and construction support, and you build teams that can serve clients across power generation, substations and switchyards, oil & gas, refining, water & desalination, renewables and data centres.
KEY RESPONSIBILITIES
-
Technical authority:
Own electrical and C&I design standards and the checking protocol (self-check squad design review inter-discipline check); approve deliverables for issue at IFR, IFA and IFC. -
Engineering strategy:
Set the design basis, execution plan and deliverable schedule for each project, from FEED through detailed engineering; lead value engineering, standardisation and digital engineering to cut rework and man-hours per deliverable. -
Power systems and substations:
Lead the design of EHV and HV substations and switchyards up to 400 kV (AIS and GIS), power, generator and unit transformers, and HV/MV/LV distribution: single-line diagrams, load lists, load-flow, short-circuit and protection-coordination studies, equipment layouts, earthing and lightning protection, UPS and DC systems. -
Protection, control and instrumentation:
Specify and review protection and control schemes, substation automation (SAS/SCADA), plant control systems (DCS/PLC) and the interfaces between them; oversee instrument indices, datasheets, loop diagrams, cause-and-effect matrices (with Process), field instrumentation and cabling, and hazardous-area classification. -
Deliverables and vendors:
Approve calculations, cable schedules, layouts, specifications, technical requisitions and quantity take-offs; oversee technical bid evaluations and review major vendor documents (transformers, switchgear, protection and control panels, UPS, DCS/PLC) through to final approval. -
Interfaces:
Manage interfaces with Process (instrument index, cause-and-effect), Mechanical (motor and load data), Piping (cable-tray routing in the 3D model) and Civil/Structural (foundations, trenches, earthing); take part in HAZOP and model reviews. -
Clients, utilities and authorities:
Act as the senior engineering contact for clients, consultants, OEMs, utilities and statutory authorities; lead technical clarifications, grid-connection discussions and comment resolution. -
Estimating and project support:
Prepare electrical and C&I scope, deliverables lists and man-hour estimates for proposals and change orders; support project managers on cost control, change management and variation claims; maintain the discipline man-hour norms. -
Team leadership:
Plan the seniority mix, resourcing and utilisation of both teams; track progress, manpower loading and critical deliverables; mentor the discipline leads and engineers. -
Safety in design:
Ensure designs meet applicable safety, hazardous-area, arc-flash and fire-protection requirements for the project's jurisdiction; uphold BGR's HSE standards.
Preferred candidate profile
REQUIRED EXPERIENCE & QUALIFICATIONS
-
Education:
B.E./B.Tech or B.Sc./B.Eng. in Electrical Engineering (Electrical & Electronics acceptable); a Master's degree in engineering or management is an advantage. -
Experience:
20+ years in electrical engineering for power generation, substation and switchyard, or industrial projects with an EPC contractor or engineering consultancy, including leading multi-discipline engineering teams on large FEED and detailed engineering projects. -
Substations and switchyards:
Has led the engineering of EHV substations and switchyards up to 400 kV (AIS and GIS), including power transformers, switchgear, protection and control, and station auxiliary systems, from design basis to construction support. -
Power systems:
Authority on single-line diagrams, load lists, load-flow, short-circuit, protection-coordination and earthing studies (ETAP or equivalent), HV/MV/LV distribution and cable sizing. -
Power generation:
Electrical balance of plant for gas-turbine, combined-cycle, thermal or captive power plants: generator and unit transformers, MV/LV switchgear, motor control, UPS, DC and emergency power. -
Control & instrumentation:
Working command of C&I scope: control philosophy, DCS/PLC/SCADA and substation-automation specifications, instrument indices, datasheets and loop diagrams, and the cause-and-effect interface with Process; has led or directly supervised C&I engineers. -
Equipment:
Hands-on ownership of datasheets, specifications, requisitions, technical bid evaluations and vendor-document review for transformers, switchgear, protection and control panels, and UPS and DC systems. -
Required codes:
IEC 60909 and IEEE 399 (short-circuit and power-system studies); IEC 62271 and IEEE C37 (HV and MV switchgear); IEC 60076 and IEEE C57 (transformers); IEEE 80 and IEC 61936-1 (substation earthing); IEC 61850 (substation automation); IEC 60079 and NEC hazardous-area classification; IEC 61511 and ISA-5.1 (safety instrumented systems and instrumentation). -
Preferred codes:
IEEE 1584 (arc flash); IEC 62305 (lightning protection); IEC 62040 (UPS) and IEEE 485 (battery sizing); IEC 62443 (OT cybersecurity); NFPA 70 for North American work; grid-code and utility interconnection requirements; and client standards such as Saudi Aramco SAES/SAMSS and ADNOC specifications. -
Regulatory:
Working knowledge of authority and utility requirements affecting electrical design, e.g. CEA regulations and electrical-inspectorate approval in India, utility and civil-defence approvals in GCC states, and utility interconnection practice in North America. -
Sectors:
Experience in at least two of: power generation, EHV substations and switchyards, oil & gas and refining, water & desalination, renewable energy, data-centre critical power. -
Tools:
Proficiency in ETAP (or DIgSILENT PowerFactory); working knowledge of EPLAN, DIALux and SmartPlant or equivalent; 3D model review (AVEVA E3D, Navisworks) is an advantage. -
Registration:
Professional registration (PE, P.Eng, CEng or equivalent) preferred; eligibility for Saudi Council of Engineers or UAE engineering registration is an advantage. -
Language:
Fluent written and spoken English; Arabic is an advantage.