Role & responsibilities The suitable candidate will have a strong background in Mechanical Engineering within the EPC and process industry. A Candidate with Chemical and/or Process Engineering degree will be considered if they have the relevant EPC experience. Main duties: Review documents provided by Customer / Contactor / for EPC enquiries / contracts. Isolate datasheets & relevant portions of bid document applicable to BS&B Rupture Disk Device, Flame-Saf and other BS&B products. Read the customers technical requirements and arrange it in a presentable format for sales team to review to aid in product selection. Tabulate complete scope of supply per quote/project incorporating specific materials and grades, NDE requirements, paint, shipping preparations, etc., with specification references, and all client requested requirements for presenting to sales. In close co-ordination and consultation with Regional Sales Manager (EMEA & APAC) production of final quotation/Bid packages for submission. This may also include online tendering or other tendering methods. Tabulate comments, exclusions, and exceptions to client specifications relevant to Technical Bid, Commercial Bid, or order confirmation package for presenting to sales. Liaison with International Engineering organization with regards to product costing, modification, special requirements, non-destructive testing, etc. Act as the technical support link between Engineering & Class III Sales. Required to handle several projects at once. Flexible to work in differing time zones of EMEA & APAC, based project demands. Preferred candidate profile Essential Requirements: 5 years + experience in handling turnkey EPC contracts. Experience with pressure relief devices, valves, pumps, pressure, and piping systems. Should have an engineering degree or equivalent ideally with a mechanical / technical background. CAD skills not mandatory but would be advantageous (AutoCAD / Inventor). Excellent communication (written and verbal English), and presentation skills. Ability to articulate & converse well with RSMs & customers. Possess excellent project management skills. Background in writing up / reviewing contract docs and / or contract negotiations essential. High level of computer literacy, good analytical skills essential. Self-starter, with the ability to work on own initiative Customer & Team orientated.
Role & responsibilities Manage inquiries from worldwide distributors and customers and generate quotations within specified time frame. Assist customers and distributors with the selection of the appropriate technical solution for a given application. Work with engineering to generate pricing where required. Using the CRM database, the ISE will be responsible for cataloguing daily activities, recording customer information and logging competitor activities regarding distribution channels, pricing. Prepare discount requests for Management approval when required. Ad-hoc project and administrative duties as assigned. Follow and adhere to ISO 9001-2015 and 14001 procedures. Support and monitor all quality audit requirements. Support the quotation activities of similar pressure relief products based on internal sales support requirements. Interacting with the manufacturing, engineering, and Quality departments for responding to the customer quality requirements. To actively participate in Bid Clarification Meeting/Technical meeting with customers Preferred candidate profile Essential Requirements: The suitable candidate will have a background in mechanical engineering. They will have previous technical sales administration experience and/or experience in industrial (petrochemical, chemical, pharma, food) processing, piping, valve, and associated industries. Fluent English written and spoken. A degree in mechanical engineering preferred. 3+ years experience relevant to inside sales/pricing/estimation/quotation processing/EPC contracts/Post Order documentation within valves, pumps, chemical, process, mechanical industry. Preferred experience within pressure relief industry Perks and benefits Medical insurance for self and family.
Role & responsibilities 1. COMPETENCY SKILLS Process Design of Gas & TEG Dehydration, Gas Sweetening, Molecular Sieve Package , Dew point depression, FPSO and Condensate Stabilization. Thermal design of Water Bath Heaters and Convective Heaters Exposure with convection, radiation heat transfer. Process Design of Oil, Gas and Water Separation, Sizing of Separators, Knock out drums, Filter Separators, Treaters, Desalters, Incinerators and Tank Sizing. Pump Sizing & Line Sizing calculation, Pressure Safety Valve Sizing. Process Simulation using Aspen HYSYS. Thermal Design of Heat Exchangers by HTRI and Aspen EDR. Good Understanding of Engineering Codes and Standards such as ASME, API and NACE . Exposure to ISO 9001 2. ROLES & RESPONSIBILITES Understanding the inputs from customer thoroughly and applying them for projects/quotes applicable. Ensure adherence to statutory and international codes & standards with respect to the process design. Review of quote / project documents in respective functional areas. Responsible for maintaining QMS procedure & related documentation with respect their task assigned. Explore the possibility of making the product/service as simple as possible without compromising quality, ultimately reducing the costs. Explore the possibility of using standard parts as far as possible, to reduce both delivery time and Cost. Design the process equipment to meet the customer need and guarantee the equipment operation. Responsible for the selection of the material with respect to the chemical reaction of the process stream. Responsible for adequacy of the sizing calculation. Coordination with the CAD Designing Department for Process related drawings Preparation of technical specification of the equipment for bought outs. Review and approval of alternates/scope change during the execution of the project within the budgeted cost and with minimal delivery impact Managing the general code standards and company engineering Specification. Management, technical execution, and completion of engineering assigned tasks in a specific process discipline area. Checking and approving all the Process documents, Process Internals drawings and some of Mechanical drawings Develop Process Design, simulation and optimization using of major process simulation programs Preparation, Reviews and Approvals of BFDs PFDs, P&IDs and Cause & Effect Diagram. Carry out Equipment and Line sizing calculations, Preparation and Review of Data sheets. Preparation and Review of Equipment List and Line List. Preparation of Equipment Specification and RFQ for the package Vendor Provide detailed process engineering input during all design phases including interpretation of standards. Participating in plant pre commissioning, commissioning and start-up as well as plant performance tests. Review any process design work carried out by third parties (vendors), and to participate in, and in some instances lead from company for, HAZOPs. Preferred candidate profile Qualifications: Bachelors Degree in Chemical Engineering Experience: 10 + years of experience in process design and simulation in the Oil and Gas design field within a large industrial organization. Perks and benefits Family Medical insurance for self and family
Role & responsibilities The Role: An experienced Mechanical Engineer required with knowledge in valve/pump related products. Essential Functions: Understanding the Datasheet of the orders thoroughly. Preparing the BOM for the orders in GP with the help of the Parts list xl sheet of the product. Allocating the corresponding Manufacturing drawings for the BOM. Checking the BOM and drawings for correctness as per the Datasheet requirements. Preparing the supplementary requirements sheet for special requirements for the order if required. Calculating the weight needed for the weight loaded Valves. Submitting the copy of BOM and supplementary requirements sheet to the Engineering Manager for review. Releasing the BOM to prepare the MO. Discuss with the Manager for special requirements requested in the Datasheet and if required, Preparing the 2D drawings for the parts related to the order from the 3D models. Preparing new 2D drawings and revising the existing drawings in Inventor for the drawings Standardization. Check all the drawings both 2D and 3D thoroughly to adhere the design guidelines and standards. (Like Title block templates, drawing standard templates, scales, dimensioning, special notes, etc). Submitting the drawing to the Engineering Manager for checking and implementing the corrections and finalizing the drawing. Preparing GA drawings for the orders in Inventor based on the Data sheet Input. Creation of new Part numbers in GP as per the Material requirements needed in the drawings and also Engineering Manager request. Delivering the Drawings and BOM for Manufacturing the Product on time Preparing 3D Models of the Stream-D Product from existing 3D Assembly model for CFD Analysis. And Co-ordinate with the CFD engineer to get the flow results of the product. Deliverables: ECN, Manufacturing drawings, Sales Drawings, BOMs, Supplemenatary requirement sheet, 3D models. Preferred candidate profile Desirable - Degree in Mechanical Engineering Proficiency in parametric 3D Modelling (Autodesk Inventor, SolidWorks, Catia, Pro-E or equivalent) essential. Proficiency in AutoCAD (2D) or SolidWorks DraftSight or equivalent essential. Looking for 5+ years of relevant experience in valve or pump related products desirable. Experience with Autodesk Vault would be advantageous. European Hours Perks and benefits Mediclaim insurance for self and family
Role & responsibilities JOB SUMMARY: To provide administrative support to project management by ensuring that documents are created, reviewed, stored, distributed, and disposed of in a systematic fashion. It is the responsibility of this position to maintain document integrity and traceability throughout the life cycle of a project. ESSENTIAL FUNCTIONS: Main Job Tasks and Responsibilities Manage, register, file and retrieve project documentation. Manage / prepare internal and external transmittals. Issue documents, queries, and formal letters. Track and log received and sent documentation. Track and record communications both internally and externally. File and maintain all electronic and hard copy files in a user-friendly format. Assist the project / inside sales team with any documentation related issues. Interface with contractors and documentation coordination. Ensure that all documents are files to reflect latest updates. Copy, scan, and store documents Check for accuracy and edit files Control over documentation modification, distribution, issuance (as per procedure) during its whole lifecycle Maintenance of a list (register) of applicable documents Update job status in SharePoint system weekly so that it is available for review at the project manager meeting. Review, distribute, and file all project management correspondence. Create drafts of change orders in Excel for the project manager to review and approve. Once approved, create final change order. Maintain open and frequent communication with the project management to ensure priorities are set and expectations are clear. Performs other duties as assigned. KEY COMPETENCIES: Excellent computer skills in Microsoft Windows environment. Evidence of the practice of a high level of confidentiality. Excellent organizational skills. Intrinsically self-motivated behavior. Proven work experience as a document controller or similar role Knowledge of Electronic Document Management Systems (EDMS) Proficient typing and editing skills Very detailed oriented A very strong communicator, verbal, written and presentational forms. Ability to read, analyze, and interpret complex documents. PERFORMANCE MEASURES: Project and Legal documents, records, and reports are accurate, complete, prepared and filed in a timely manner Good communication and coordination exist with company personnel, assistance and support are provided as needed. Management is appropriately informed of area activities. Administrative functions are completed in accordance with established standards, policies, and procedures. Preferred candidate profile JOB REQUIREMENTS: Education: To degree level in a hard science Language: Fluent spoken and written English Experience: Five years of previous related experience, mechanical engineering exposure is preferred. Knowledge: Knowledge of related computer applications: SharePoint, Excel, Word and exposure to other Electronic Document Management Systems (EDMS) a plus.
Role & responsibilities Day to day duties of the role; Design of Mechanical systems of the process equipment for quotations and projects. Interpretation of the general & organization standards and utilizing in the projects and quotation, design involves the selection of material, size, interference check, feasibility of fabrications with respect to the ASME requirements, company standards and customer requirement. Making sure the projects and quotation are satisfying the applicable code and customer requirement with respect to the mechanical & structural design. Responsible for the projects mechanical & structural design within the Estimated or budgeted cost. Ensure quality of the drawing with respect to the applicable code, customer specification and manufacturing feasibility. Keep updated with the knowledge of code changes and standards with respect to the mechanical design. Responsible for adequacy of the Mechanical calculation and Checking the fabrication drawings. Guiding the CAD Designing Department. Meeting the Pressure equipment requirements of the statutory regulation. Technical specification preparation of the Mechanical equipment for outsourcing. Selection of material. Responsible for implementing QMS procedure & maintaining related documentation with respect to their task assigned. Responsible for updating companys engineering Specification & maintenance of latest ASME/Standard Codes. Responsible for Retrieval, Updating and utilization of the Code(s) when projects demand. Carrying out estimation Authority: Approve mechanical design drawings and associated calculation documents Preferred candidate profile Essential requirements; Hons. Degree in Mechanical / Production Engineering or equivalent. High level of computer literacy essential. Fluent English written and spoken. Willing to travel overseas. Exposure to Compress, PVElite, Ansys, Staadpro, FEA, & Microsoft Project would be advantageous. Good analytical, design skills, creativity in providing competitive customer design solutions. Strong technical leadership skills with an ability to influence others. Self-starter with the ability to work on own initiative. Proven track record in delivering reliability, cost, quality & productivity improvement projects. Experience working in a regulated environment & knowledge of requirements & procedures are required. Excellent communication, written, credibility & presentation skills. Customer orientated. Additional Requirements Proficient in AutoCAD 2D Familiarity with 3D (cadworx), dimensioning & drawing layout. Perks and benefits Group Mediclaim for self and family
Role & responsibilities 1. COMPETENCY SKILLS Process Design of Gas & TEG Dehydration, Gas Sweetening, Molecular Sieve Package , Dew point depression, FPSO and Condensate Stabilization. Thermal design of Water Bath Heaters and Convective Heaters Exposure with convection, radiation heat transfer. Process Design of Oil, Gas and Water Separation, Sizing of Separators, Knock out drums, Filter Separators, Treaters, Desalters, Incinerators and Tank Sizing. Pump Sizing & Line Sizing calculation, Pressure Safety Valve Sizing. Process Simulation using Aspen HYSYS. Thermal Design of Heat Exchangers by HTRI and Aspen EDR. Good Understanding of Engineering Codes and Standards such as ASME, API and NACE . Exposure to ISO 9001 2. ROLES & RESPONSIBILITES Understanding the inputs from customer thoroughly and applying them for projects/quotes applicable. Ensure adherence to statutory and international codes & standards with respect to the process design. Review of quote / project documents in respective functional areas. Responsible for maintaining QMS procedure & related documentation with respect their task assigned. Explore the possibility of making the product/service as simple as possible without compromising quality, ultimately reducing the costs. Explore the possibility of using standard parts as far as possible, to reduce both delivery time and Cost. Design the process equipment to meet the customer need and guarantee the equipment operation. Responsible for the selection of the material with respect to the chemical reaction of the process stream. Responsible for adequacy of the sizing calculation. Coordination with the CAD Designing Department for Process related drawings Preparation of technical specification of the equipment for bought outs. Review and approval of alternates/scope change during the execution of the project within the budgeted cost and with minimal delivery impact Managing the general code standards and company engineering Specification. Management, technical execution, and completion of engineering assigned tasks in a specific process discipline area. Checking and approving all the Process documents, Process Internals drawings and some of Mechanical drawings Develop Process Design, simulation and optimization using of major process simulation programs Preparation, Reviews and Approvals of BFDs PFDs, P&IDs and Cause & Effect Diagram. Carry out Equipment and Line sizing calculations, Preparation and Review of Data sheets. Preparation and Review of Equipment List and Line List. Preparation of Equipment Specification and RFQ for the package Vendor Provide detailed process engineering input during all design phases including interpretation of standards. Participating in plant pre commissioning, commissioning and start-up as well as plant performance tests. Review any process design work carried out by third parties (vendors), and to participate in, and in some instances lead from company for, HAZOPs. Preferred candidate profile Qualifications: Bachelors Degree in Chemical Engineering Experience: 5 + years of experience in process design and simulation in the Oil and Gas design field within a large industrial organization and at least 2- 3 years relevant experience Perks and benefits Family Medical insurance for self and family
Role & responsibilities The Role: An experienced Mechanical Engineer required with knowledge in valve/pump related products. Essential Functions: Responsible for creating BOM for orders by including pre-existing components from products parts list to the bill of material, following technical data provided in the approved data sheet for the order. Allocating the corresponding manufacturing drawings for production of non-stock items of the bill of material. Preparing Supplementary Requirements Sheet as applicable for orders that contain non-standard requirements and or testing. Prepare manufacturing drawings for components needed to produce products with non-standard configurations. Support Engineering with schedule type drawings for components and assemblies needed for certification of new and existing products. Prepare order specific manufacturing procedures for approval, including Painting, Handling and Storage, Preservation, Factory Acceptance Test, Dye Penetrant, Packing, Positive Material Identification procedures, among others. Prepare Sales Step Files for orders using existing product 3D models. Prepare Approval Drawings for orders according to approved data sheet details. Maintain database of part numbers for Engineering parts, by revising existing part numbers and create new ones as necessary for producing the orders and maintain products Engineering data base. Prepare and revise IOM for existing products and variations as required. Preparing 3D Models of Stream-D Product from existing 3D Assembly model for CFD Analysis, and Co-ordinate with the CFD engineer to get the flow results of the product. Deliverables ECN Manufacturing Drawings Sales Drawings BOMs Supplementary requirements sheet 3D Models Education and Experience: Desirable - Degree in Mechanical Engineering 5+ years of relevant experience in valve or pump related products desirable. Proficiency in parametric 3D Modelling (Autodesk Inventor, SolidWorks, Catia, Pro-E or equivalent) essential. Proficiency in AutoCAD (2D) or SolidWorks DraftSight or equivalent essential with knowledge of GD&T, dimensioning and layout for mechanical parts and assemblies drawings Knowledge of mechanical fasteners, their types, applications and sizing. Knowledge of popular material grades for mechanical constructions for pressure holding items in carbon and stainless steel, ASTM or EN. Knowledge of traditional mechanical manufacturing processes, such as turning, milling, drilling, tapping, reaming and welding. Familiarity with traditional welding techniques such as MIG & TIG and welding symbology on manufacturing drawings for preparing adequate manufacturing drawings for welded constructions Familiarity with traditional casting methods such as sand casting and investment casting for preparing adequate manufacturing drawings of cast components Experience with Autodesk Vault would be advantageous. European Hours Perks and benefits Mediclaim insurance for self and family
COMPETENCY PROFILE Carryout Bid Estimations for Mechanical Components like Pressure Vessels, Piping & Valves, and other mechanical components. Coordination with Internal technical Team and vendors to close out Technical Bid evaluation. Familiar with ASME Mechanical Calculation Reports. Familiar with Oil and Gas Instrumentations. Familiar to Oil and Gas Process Packages (Separators, Desalters, Treaters, Gas Dehydration, Bath heaters Familiar with Design Compliance to Canadian Registration, National Board, ABS, and PED. Familiar to P&ID, PFD, Piping Components & Manual Valves are advantageous Familiar with Technical Bid evaluation of with different vendors. Responsible for the projects mechanical construction with in the Estimated or budgeted cost Role & responsibilities Preparing cost estimation sheet for the proposals. Validate the estimates during project execution Arriving at the competitive cost and accurate estimation for the proposal. Coordination with the respective discipline engineers for necessary estimation inputs. Using the excel spreadsheet to determine the cost of the proposal. Maintaining & updating the database for estimation for various raw materials, bought outs and specialty items. Review with procurement team about the current price and constantly update the estimation database. Planning & organizing the performance factors used for adjusting the estimates. Responsible for implementing QMS procedure & maintaining related documentation with respect their task assigned. Close work with Department head to collect and monitoring of actual Manpower, Man-hours spent, tools used & other factors to arrive at accurate estimates. Coordination with Technical team to Preparation of Equipment Specification and RFQ for the package Vendor. • Coordination of Mechanical engineering design and drafting. • Development and Improvement of company standards and design methods. • Scheduling, Planning and Estimating activities. • Developing good relationship with sub vendors and get the best price from them. • Safety responsible for personal safety working practices for the Oil and Gas Business Unit Understand and follow OH&S procedures. Preferred candidate profile SOFTWARE SKILLS Familiar ASME Code Vessel Design by Codeware Compress and or PVElite. Familiar with AutoCAD MS OFFICE Softwares COMMUNICATION & WORKING RELATIONSHIPS Fluent English written and spoken. Excellent communication, written, credibility & presentation skills. Willing to travel overseas. Regular and good interaction peer professional staff and team members Follow the processes and policies as per company norms. Qualifications: Bachelors Degree in Mechanical Engineering Experience: 7+ years of experience in the cost estimation of the packages which involves Pressure Vessels, Heat Exchanger, Manual valves, Structural and Piping Design of the Oil and Gas design field.
Role & responsibilities Understanding the inputs from customer thoroughly and applying them for projects/quotes applicable. Ensure adherence to statutory and international codes & standards with respect to the process design. Review of quote / project documents in respective functional areas. Responsible for maintaining QMS procedure & related documentation with respect their task assigned. Explore the possibility of making the product/service as simple as possible without compromising quality, ultimately reducing the costs. Explore the possibility of using standard parts as far as possible, to reduce both delivery time and Cost. Design the process equipment to meet the customer need and guarantee the equipment operation. Responsible for the selection of the material with respect to the chemical reaction of the process stream. Responsible for adequacy of the sizing calculation. Coordination with the CAD Designing Department for Process related drawings Preparation of technical specification of the equipment for bought outs. Review and approval of alternates/scope change during the execution of the project within the budgeted cost and with minimal delivery impact Managing the general code standards and company engineering Specification. Management, technical execution, and completion of engineering assigned tasks in a specific process discipline area. Checking and approving all the Process documents, Process Internals drawings and some of Mechanical drawings Develop Process Design, simulation and optimization using of major process simulation programs Preparation, Reviews and Approvals of BFDs PFDs, P&IDs and Cause & Effect Diagram. Carry out Equipment and Line sizing calculations, Preparation and Review of Data sheets. Preparation and Review of Equipment List and Line List. Preparation of Equipment Specification and RFQ for the package Vendor Provide detailed process engineering input during all design phases including interpretation of standards. Participating in plant pre commissioning, commissioning and start-up as well as plant performance tests. Review any process design work carried out by third parties (vendors), and to participate in, and in some instances lead from company for, HAZOPs. Preferred candidate profile Qualifications: Bachelors Degree in Chemical Engineering Experience: 10 + more years of experience in process design and simulation in the Oil and Gas design field within a large industrial organization.