Unimech Aerospace and Manufacturing Limited logo

AM - Quality Manager

Unimech Aerospace and Manufacturing Limited

10 - 20 years

10 - 16 Lacs

Bengaluru Devanahalli

Posted:19 hours ago

Job Description

1. JOB PURPOSE

To lead and manage the complete Quality Assurance and Quality Control function of a high-precision aerospace CNC manufacturing facility, ensuring compliance with AS9100D Rev. D, ISO 9001:2015, aerospace customer requirements, engineering drawings and applicable industry standards.

The candidate must possess strong practical experience in aerospace quality management systems, APQP, PFMEA, Control Plans, MSA, Gauge R&R, CMM inspection, GD&T, AS9102 First Article Inspection, special process control and aerospace customer quality management.

The individual should be capable of independently handling customer quality audits, technical discussions, quality escalations and approval requirements.

2. KEY RESPONSIBILITIES

A. Aerospace Quality Management System AS9100D Rev. D

  • Establish, implement, maintain and continuously improve AS9100D Rev. D Quality Management System.
  • Ensure effective implementation of ISO 9001:2015 requirements.
  • Prepare and maintain Quality Manual, procedures, work instructions and quality records.
  • Plan and conduct internal quality audits and process audits.
  • Coordinate external certification audits, surveillance audits and customer audits.
  • Manage NCR, CAPA, corrective and preventive actions.
  • Ensure risk-based thinking, operational risk management and continual improvement.
  • Ensure compliance with aerospace customer-specific quality requirements.
  • Monitor effectiveness of the Quality Management System.

B. APQP – Advanced Product Quality Planning

  • Lead APQP activities for new aerospace product development.
  • Prepare and review Process Flow Diagrams (PFD).
  • Prepare and implement Process Failure Mode and Effects Analysis (PFMEA).
  • Develop and implement Control Plans.
  • Prepare Inspection and Test Plans (ITP).
  • Establish quality planning and inspection requirements for new components.
  • Coordinate with Production and Engineering for process validation.
  • Ensure effective implementation of quality planning during NPI.
  • Review and approve quality documentation before production release.

C. MSA – Measurement System Analysis and Gauge R&R

  • Strong practical knowledge of Measurement System Analysis (MSA).
  • Conduct and review Gauge R&R studies covering repeatability and reproducibility.
  • Evaluate measurement system capability and suitability.
  • Establish calibration and verification systems for measuring instruments.
  • Understand measurement uncertainty, accuracy, precision and traceability.
  • Ensure appropriate measuring instruments are selected for critical aerospace dimensions.
  • Maintain calibration records and measuring instrument registers.
  • Establish measurement system control for CMM and other precision inspection equipment.

D. Dimensional Inspection and Advanced Metrology

Must have strong practical knowledge of:

  • CMM operation, programming and inspection methodology.
  • Contour measuring instruments.
  • Profile projectors.
  • Height gauges, bore gauges and precision micrometers.
  • Roundness and surface roughness measuring instruments.
  • Digital and specialised precision measuring equipment.
  • Calibration and measurement traceability.
  • GD&T and complex engineering drawing interpretation.
  • Datum structures, true position, profile, concentricity, runout and geometric tolerances.

Ensure inspection planning, first-off inspection, in-process inspection and final inspection of aerospace components.

E. CNC Machining Quality and Process Inspection

Experience in quality control and inspection of:

  • CNC turning components.
  • Twin-spindle CNC turn-mill components.
  • 3-axis, 4-axis and 5-axis CNC milled components.
  • CNC VTL components.
  • Wire-Cut EDM components.
  • Complex precision aerospace components with tight dimensional tolerances.

Ensure dimensional inspection reports are reviewed against customer drawings, specifications and approved inspection requirements.

F. Aerospace Special Process Quality Management

  • Strong understanding of aerospace special process requirements.
  • Control and monitor in-house and outsourced special processes.
  • Experience with heat treatment, anodising, chemical conversion coating, plating, passivation and protective coatings.
  • Knowledge of Non-Destructive Testing (NDT) processes such as FPI, MPI, UT and radiography.
  • Review special process certificates, test reports and process qualification records.
  • Ensure compliance with applicable aerospace specifications and customer requirements.
  • Coordinate special process supplier audits and approval requirements.
  • Knowledge of NADCAP accreditation and special process supplier management will be a strong advantage.

G. Aerospace Quality Documentation and First Article Inspection

  • Preparation and review of AS9102 First Article Inspection Reports (FAIR).
  • Preparation and maintenance of APQP documentation.
  • Process Flow Diagrams (PFD).
  • PFMEA and Control Plans.
  • Inspection and Test Plans (ITP).
  • MSA and Gauge R&R reports.
  • Dimensional inspection and CMM reports.
  • Material traceability records and material test certificates.
  • Special process certificates and qualification records.
  • Non-Conformance Reports (NCR).
  • Corrective Action Reports (CAR) and 8D reports.
  • Calibration and measurement system records.
  • Customer-specific quality documentation and approval records.

H. Quality Tools and Continuous Improvement

  • Strong knowledge of 7 QC Tools.
  • Statistical Process Control (SPC).
  • Process Capability Analysis (Cp, Cpk, Pp and Ppk).
  • Root Cause Analysis using 5 Why and Fishbone.
  • 8D Problem Solving.
  • Risk Management and FMEA.
  • Continuous improvement and defect prevention.
  • Supplier Quality Management and supplier development.
  • Reduction of internal and customer rejection.

I. Supplier Quality Management

  • Monitor and improve supplier quality performance.
  • Conduct supplier quality audits and process evaluations.
  • Ensure raw material certifications and material traceability.
  • Monitor outsourced special process suppliers.
  • Handle supplier non-conformities and corrective actions.
  • Ensure supplier compliance with aerospace customer requirements.
  • Maintain approved supplier documentation and performance records.

J. Aerospace Customer Handling and Quality Management

  • Strong experience in direct customer quality interactions with aerospace OEMs and Tier-1/Tier-2 suppliers.
  • Independently handle customer quality audits, quality reviews and technical discussions.
  • Handle customer complaints, NCRs, corrective actions and 8D reports.
  • Coordinate customer FAI approvals and dimensional inspection documentation.
  • Respond to customer queries related to GD&T, CMM, MSA, Gauge R&R, material traceability and special processes.
  • Manage customer quality escalations and ensure timely closure of corrective actions.
  • Coordinate customer visits and represent the organisation during quality meetings.
  • Ensure customer-specific quality requirements are understood and implemented across departments.

Preferred Aerospace Customer Exposure:

Airbus, Boeing, Honeywell Aerospace, GE Aerospace, Safran, Rolls-Royce, Pratt & Whitney, ISRO and HAL.

Experience working with their approved Tier-1/Tier-2 suppliers will also be considered.

K. Quality Team Management and Training

  • Lead and manage quality engineers, inspectors, CMM programmers and metrology personnel.
  • Develop departmental responsibilities and competency matrices.
  • Conduct training on AS9100D, GD&T, CMM, APQP, PFMEA, MSA and inspection methods.
  • Develop employee technical competency and inspection skills.
  • Ensure effective implementation of quality procedures across production and engineering.

.

3. PREFERRED CANDIDATE PROFILE

  • Experience in aerospace, defence or high-precision manufacturing quality.
  • Strong hands-on experience in AS9100D Rev. D implementation.
  • Practical knowledge of APQP, PFMEA, Control Plans, MSA and Gauge R&R.
  • Strong CMM, GD&T and precision metrology experience.
  • Experience in aerospace special process control and supplier quality.
  • Strong knowledge of AS9102 FAI and aerospace quality documentation.
  • Experience in handling international aerospace customer audits and quality escalations.
  • Excellent leadership, communication and problem-solving skills.
  • Ability to independently lead the complete Quality Department.

  • Actual AS9100D Rev. D implementation experience, not documentation-only exposure.
  • Experience handling special process suppliers and aerospace quality documentation.
  • Experience in precision CNC machining and aerospace component manufacturing.

Skills Required

Machining process MSA 7Qc Ams Machining Apqp PFMEA CMM

Work Mode

Work from Office

Job Type

Full Time

Mock Interview

Practice Video Interview with JobPe AI

Start Job-Specific Interview
cta

Start Your Job Search Today

Browse through a variety of job opportunities tailored to your skills and preferences. Filter by location, experience, salary, and more to find your perfect fit.

coding practice

Enhance Your Skills

Practice coding challenges to boost your skills

Start Practicing Now
Unimech Aerospace and Manufacturing Limited logo
Unimech Aerospace and Manufacturing Limited

RecommendedJobs for You

Unimech Aerospace and Manufacturing Limited logo

AM - Quality Manager

Unimech Aerospace and Manufacturing Limited

Bengaluru, Devanahalli

Unimech Aerospace and Manufacturing Limited logo

AM - Quality Manager

Unimech Aerospace and Manufacturing Limited

Bengaluru, Devanahalli