1. Machine Setup Interpret technical drawings, blueprints, and job orders. 2. Tool and Material Management Choose the correct cutting tools based on material and process. Measure and inspect tools to ensure proper condition. Replace worn or damaged tools as needed. Load raw material into the machine or fixtures. 3. Quality Control Inspect the first piece and compare it to specifications using gauges, micrometers, calipers, or CMM. Make necessary adjustments to meet tolerance requirements. Document setup parameters and inspection results. Coordinate with Quality Control (QC) for approval of first-off components. 4. Maintenance and Troubleshooting Monitor machine operation and identify issues. Perform basic preventive maintenance (cleaning, lubrication, etc.). Troubleshoot machine or tool problems and escalate if needed. Ensure machines and work areas are clean and safe. 5. Production Support Assist operators in understanding the setup and machining process. Support the transition from one job to another by reducing downtime. Optimize setups to reduce machining time and improve efficiency. 6. Documentation and Communication Maintain setup sheets and update them for future reference. Communicate with production supervisors, CNC programmers, and quality teams. Record production data and setup times. Select and install appropriate tools, jigs, and fixtures. Set up workpieces on the machine table or fixtures. Input or load CNC programs into the machine controller. Set tool offsets, work offsets, and zero points. Perform dry runs and trial machining for setup verification. Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Experience: SETTER: 1 year (Required) Work Location: In person
Responsibilities : Basic knowledge of engineering drawing reading Basic knowledge of measuring instruments Basic knowledge of GD&T parameters Basic knowledge of machining process Qualification - Dipl/B.E. Mech/Production Experience - Fresher to 2 years Job Type: Full-time Pay: ₹13,000.00 - ₹18,000.00 per month Experience: quality: 1 year (Required) Work Location: In person
Key Responsibilities:Develop detailed 3D models and drawings using NX CAD.Work closely with cross-functional teams to support the New Product Development (NPD) process.Design and validate mechanical components, assemblies, and systems.Ensure designs meet all specifications, quality, and safety standards.Participate in design reviews and contribute to continuous improvement initiatives.Support the production and manufacturing processes as required. Education & Qualifications:DME (Diploma in Mechanical Engineering) or B.E. in Mechanical Engineering (or equivalent).Proven experience with NX CAD software for mechanical design.Strong understanding of the New Product Development (NPD) process.Excellent problem-solving and analytical skills.Strong communication and collaboration abilities. Skills & Competencies:Expertise in NX CAD.Knowledge of the NPD process and product lifecycle management.Solid understanding of mechanical systems and design principles.Familiarity with design for manufacturability (DFM) and design for assembly (DFA).Ability to work under pressure and meet deadlines. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Experience: DESIGN: 1 year (Required) Work Location: In person
Key Responsibilities: Develop CNC programs for HMC/VMC machines using CAM software (e.g., Mastercam, Siemens NX, Fusion 360). Qualifications: Experience: Minimum 2–5 years in CNC programming and machining, with expertise in HMC and VMC operations. Education: Diploma or degree in Mechanical/Production Engineering or equivalent technical training. Skills: Proficient in G-code and CAM software. Strong understanding of machining principles and cutting tools. Knowledge of GD&T (Geometric Dimensioning & Tolerancing). Ability to use precision measuring instruments (calipers, micrometers, CMM, etc.). Problem-solving mindset and attention to detail. Read and interpret technical drawings, blueprints, and specifications. Set up machines including fixture installation, tool selection, and part loading. Perform first-piece inspection and adjust offsets to maintain quality. Optimize machining processes for efficiency, tool life, and quality. Troubleshoot machining issues and implement corrective actions. Collaborate with engineering and quality teams on process improvements. Maintain documentation for programs, setups, and tooling. Perform preventive maintenance on machines and follow safety protocols. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Experience: programmer: 2 years (Required) Work Location: In person
1. Machine Setup Interpret technical drawings, blueprints, and job orders. 2. Tool and Material Management Choose the correct cutting tools based on material and process. Measure and inspect tools to ensure proper condition. Replace worn or damaged tools as needed. Load raw material into the machine or fixtures. 3. Quality Control Inspect the first piece and compare it to specifications using gauges, micrometers, calipers, or CMM. Make necessary adjustments to meet tolerance requirements. Document setup parameters and inspection results. Coordinate with Quality Control (QC) for approval of first-off components. 4. Maintenance and Troubleshooting Monitor machine operation and identify issues. Perform basic preventive maintenance (cleaning, lubrication, etc.). Troubleshoot machine or tool problems and escalate if needed. Ensure machines and work areas are clean and safe. 5. Production Support Assist operators in understanding the setup and machining process. Support the transition from one job to another by reducing downtime. Optimize setups to reduce machining time and improve efficiency. 6. Documentation and Communication Maintain setup sheets and update them for future reference. Communicate with production supervisors, CNC programmers, and quality teams. Record production data and setup times. Select and install appropriate tools, jigs, and fixtures. Set up workpieces on the machine table or fixtures. Input or load CNC programs into the machine controller. Set tool offsets, work offsets, and zero points. Perform dry runs and trial machining for setup verification. Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Experience: SETTER: 1 year (Required) Work Location: In person
Responsibilities : Basic knowledge of engineering drawing reading Basic knowledge of measuring instruments Basic knowledge of GD&T parameters Basic knowledge of machining process Qualification - Dipl/B.E. Mech/Production Experience - Fresher to 2 years Job Type: Full-time Pay: ₹13,000.00 - ₹18,000.00 per month Experience: quality: 1 year (Required) Work Location: In person
Key Responsibilities: Develop CNC programs for HMC/VMC machines using CAM software (e.g., Mastercam, Siemens NX, Fusion 360). Qualifications: Experience: Minimum 2–5 years in CNC programming and machining, with expertise in HMC and VMC operations. Education: Diploma or degree in Mechanical/Production Engineering or equivalent technical training. Skills: Proficient in G-code and CAM software. Strong understanding of machining principles and cutting tools. Knowledge of GD&T (Geometric Dimensioning & Tolerancing). Ability to use precision measuring instruments (calipers, micrometers, CMM, etc.). Problem-solving mindset and attention to detail. Read and interpret technical drawings, blueprints, and specifications. Set up machines including fixture installation, tool selection, and part loading. Perform first-piece inspection and adjust offsets to maintain quality. Optimize machining processes for efficiency, tool life, and quality. Troubleshoot machining issues and implement corrective actions. Collaborate with engineering and quality teams on process improvements. Maintain documentation for programs, setups, and tooling. Perform preventive maintenance on machines and follow safety protocols. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Experience: programmer: 2 years (Required) Work Location: In person
Inventory Management: Ensure that inventory levels are maintained accurately and are adequate to meet customer demand. Monitor stock levels, receive and inspect incoming goods, and conduct regular stock audits. Coordinate stock replenishment, manage returns, and ensure stock rotation to avoid expiration (if applicable). Operational Efficiency: Maintain store cleanliness, organization, and visual merchandising standards. Ensure that all store equipment and systems (POS, security systems, etc.) are functioning correctly. Ensure compliance with health and safety regulations. Reporting and Documentation: Prepare regular reports on stock levels, sales, staff performance, and other operational aspects. Maintain records of transactions, stock movements, and inventory adjustments. Submit performance and issue reports to upper management. Ensure that all store equipment and systems (POS, security systems, etc.) are functioning correctly. Ensure compliance with health and safety regulations. Loss Prevention and Security: Implement and enforce security measures to prevent theft or loss. Conduct regular audits and work with security personnel to ensure the store's assets are protected. Supplier Coordination: Liaise with suppliers to ensure timely deliveries and resolve any issues related to product supply. Negotiate with suppliers for favorable pricing or terms when necessary. Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Experience: Store management: 1 year (Required) Work Location: In person
Inventory Management: Ensure that inventory levels are maintained accurately and are adequate to meet customer demand. Monitor stock levels, receive and inspect incoming goods, and conduct regular stock audits. Coordinate stock replenishment, manage returns, and ensure stock rotation to avoid expiration (if applicable). Operational Efficiency: Maintain store cleanliness, organization, and visual merchandising standards. Ensure that all store equipment and systems (POS, security systems, etc.) are functioning correctly. Ensure compliance with health and safety regulations. Reporting and Documentation: Prepare regular reports on stock levels, sales, staff performance, and other operational aspects. Maintain records of transactions, stock movements, and inventory adjustments. Submit performance and issue reports to upper management. Ensure that all store equipment and systems (POS, security systems, etc.) are functioning correctly. Ensure compliance with health and safety regulations. Loss Prevention and Security: Implement and enforce security measures to prevent theft or loss. Conduct regular audits and work with security personnel to ensure the store's assets are protected. Supplier Coordination: Liaise with suppliers to ensure timely deliveries and resolve any issues related to product supply. Negotiate with suppliers for favorable pricing or terms when necessary. Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Experience: Store management: 1 year (Required) Work Location: In person
Required below skills and experience : - 5 to 7 years of experience in relevant role - Fluent in English communication - Handling Domestic as well as Export customers, - Able to handle requests for Quotation (RFQs) including detailed cost preparation for casting and machining operations, ensuring competitive and accurate pricing. - Submit formal quotes for RFQs - Conducted feasibility studies for new inquiries, aligning company capabilities with customer expectations - To monitor project progress diligently, ensuring adherence to schedules and prompt resolution of any delays to meet customer requirement - co-ordinate new product development process Job Type: Full-time Pay: ₹35,000.00 - ₹40,000.00 per month Experience: MARKETING: 3 years (Required) Work Location: In person
Required below skills and experience : - 5 to 7 years of experience in relevant role - Fluent in English communication - Handling Domestic as well as Export customers, - Able to handle requests for Quotation (RFQs) including detailed cost preparation for casting and machining operations, ensuring competitive and accurate pricing. - Submit formal quotes for RFQs - Conducted feasibility studies for new inquiries, aligning company capabilities with customer expectations - To monitor project progress diligently, ensuring adherence to schedules and prompt resolution of any delays to meet customer requirement - co-ordinate new product development process Job Type: Full-time Pay: ₹35,000.00 - ₹40,000.00 per month Experience: MARKETING: 3 years (Required) Work Location: In person
Job Profile: Plan and prepare the preventive maintenance schedule for Melting Area (Melting furnace, Fume extraction, Magnet crane, cooling pumps & Hydraulic system), Knockout, Shot blasting and Utility Area (Compressor, Transformer, Electrical Room, EOT, HOT). Daily breakdown maintenance activity and manpower handling as per work priority across the all plant. Plan & prepare the preventive maintenance of all Panels and Electrical control room equipment’s. Plan and preparing the Annual Repair & Maintenance. All safety norms to be followed like work permit, usage of PPE, Usage of Earthing unit, Earth rod, etc Ensure Electrical Safety across the Plant. Plan & arrange machineries spares as per requirement with minimum inventory. Responsible for power shutdown & PF maintenance activities for foundry and utilities. Responsible for installation, monitoring the performance of CCTV across the plant. Responsible for preparing MTTR, MTBF & OEE for overall maintenance of foundry. Responsible for preparing monthly, yearly management report for overall maintenance performance for foundry. * Exp.: Min 7 to 8 yrs. Education: Diploma or B. Tech Electrical Job Type: Full-time Pay: ₹30,000.00 - ₹35,000.00 per month Experience: Electric maintenance: 5 years (Required) Work Location: In person
As an Inventory Management Specialist, you will play a crucial role in ensuring that inventory levels are accurately maintained to meet customer demand. Your responsibilities will include monitoring stock levels, receiving and inspecting incoming goods, and conducting regular stock audits. You will also be responsible for coordinating stock replenishment, managing returns, and ensuring stock rotation to avoid expiration when applicable. In terms of operational efficiency, you will be tasked with maintaining store cleanliness, organization, and visual merchandising standards. It will be essential to ensure that all store equipment and systems, such as POS systems and security systems, are functioning correctly. Additionally, you will need to uphold compliance with health and safety regulations to provide a safe environment for both customers and staff. Reporting and documentation will be a key aspect of your role. You will be required to prepare regular reports on stock levels, sales, staff performance, and other operational aspects. Maintaining records of transactions, stock movements, and inventory adjustments will also fall under your responsibilities. Furthermore, you will need to submit performance and issue reports to upper management to keep them informed of the store's operations. Loss prevention and security will be a critical focus area. You will need to implement and enforce security measures to prevent theft or loss. Conducting regular audits and collaborating with security personnel to protect the store's assets will be essential in maintaining a secure environment. Supplier coordination will also be part of your duties. You will need to liaise with suppliers to ensure timely deliveries and address any issues related to product supply. Negotiating with suppliers for favorable pricing or terms when necessary will help in optimizing inventory management. This is a full-time position that requires at least 1 year of experience in store management. The work location will be in person, and your dedication to maintaining efficient inventory management practices will be instrumental in the overall success of the store.,
Responsibilities : Basic knowledge of engineering drawing reading Basic knowledge of measuring instruments Basic knowledge of GD&T parameters Basic knowledge of machining process Qualification - Dipl/B.E. Mech/Production Experience - Fresher to 2 years Job Type: Full-time Pay: ₹18,000.00 - ₹20,000.00 per month Experience: quality: 1 year (Required) Work Location: In person
Responsibilities : Basic knowledge of engineering drawing reading Basic knowledge of measuring instruments Basic knowledge of GD&T parameters Basic knowledge of machining process Qualification - Dipl/B.E. Mech/Production Experience - Fresher to 2 years Job Type: Full-time Pay: ₹18,000.00 - ₹20,000.00 per month Experience: quality: 1 year (Required) Work Location: In person
The ideal candidate for this role should have 5 to 7 years of experience in a relevant position and possess fluent English communication skills. You will be responsible for handling both Domestic and Export customers. Your primary tasks will include handling requests for Quotation (RFQs), preparing detailed cost estimates for casting and machining operations, and ensuring competitive and accurate pricing. You will also be expected to submit formal quotes for RFQs and conduct feasibility studies for new inquiries to align company capabilities with customer expectations. Monitoring project progress diligently to ensure adherence to schedules and prompt resolution of any delays to meet customer requirements will be a key part of your role. Additionally, you will be required to coordinate the new product development process. This is a full-time position requiring a minimum of 3 years of experience in Marketing. The work location for this role is in person.,
You will be responsible for planning and preparing the preventive maintenance schedule for the Melting Area, including Melting furnace, Fume extraction, Magnet crane, cooling pumps, and Hydraulic system. You will also oversee maintenance activities for Knockout, Shot blasting, and Utility Area which includes Compressor, Transformer, Electrical Room, EOT, and HOT. Your duties will involve handling daily breakdown maintenance activities and managing manpower as per work priority throughout the plant. Additionally, you will be in charge of planning and preparing preventive maintenance for all Panels and Electrical control room equipments. You will be required to plan and prepare Annual Repair & Maintenance activities and ensure that all safety norms are followed, including work permits, usage of PPE, Earthing unit, and Earth rod to maintain Electrical Safety across the Plant. As part of your responsibilities, you will need to plan and arrange machinery spares based on requirements with minimum inventory. You will also be accountable for power shutdown & PF maintenance activities for the foundry and utilities. Monitoring the performance of CCTV across the plant, preparing MTTR, MTBF & OEE for overall maintenance of the foundry, and generating monthly and yearly management reports for overall maintenance performance will also fall under your role. The ideal candidate should have a minimum of 7 to 8 years of experience and hold a Diploma or B. Tech in Electrical. Prior experience of 5 years in Electric maintenance is required. This is a Full-time position that requires on-site presence at the work location.,
Key Responsibilities:Develop detailed 3D models and drawings using NX CAD.Work closely with cross-functional teams to support the New Product Development (NPD) process.Design and validate mechanical components, assemblies, and systems.Ensure designs meet all specifications, quality, and safety standards.Participate in design reviews and contribute to continuous improvement initiatives.Support the production and manufacturing processes as required. Education & Qualifications:DME (Diploma in Mechanical Engineering) or B.E. in Mechanical Engineering (or equivalent).Proven experience with NX CAD software for mechanical design.Strong understanding of the New Product Development (NPD) process.Excellent problem-solving and analytical skills.Strong communication and collaboration abilities. Skills & Competencies:Expertise in NX CAD.Knowledge of the NPD process and product lifecycle management.Solid understanding of mechanical systems and design principles.Familiarity with design for manufacturability (DFM) and design for assembly (DFA).Ability to work under pressure and meet deadlines. Job Type: Full-time Pay: ₹30,000.00 - ₹40,000.00 per month Experience: FIXTURE DESIGN: 3 years (Required) Work Location: In person
Expertise in metallurgical and materials engineering Experience in CI Grades and its properties Experience in Micro structure analysis, Tensile testing and Hardness testing standards Expertise in best foundry practices in Melting, poring and Metallurgy lab Experience in foundry operations and quality control Knowledge of analyzing and interpreting metallurgical data Strong problem-solving and decision-making skills Excellent communication and teamwork abilities Job Type: Full-time Pay: ₹35,000.00 - ₹40,000.00 per month Experience: foundry: 3 years (Preferred) Work Location: In person
Roles and Responsibilities : 1. Measurement and Inspection 2. Programming CMM Machines (Carl Zeiss) 3. Quality Control Support 4. Documentation and Reporting 5. Tool and Equipment Maintenance 6. Compliance and Standards 7. Support Manufacturing Process Skills and Qualifications Required Knowledge of CMM machines and relevant software. Strong understanding of GD&T and mechanical drawing interpretation. Familiarity with HMC/VMC machining processes and tooling. Experience in precision measurement tools like micrometers, height gauges, calipers, and dial indicators. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Experience: CMM Operating: 2 years (Required) Work Location: In person