272 Jobs in Phaltan - Page 11

Job Summary: Operates machines and production equipment in accordance with quality and productivity requirements safely in a manufacturing environment with limited guidance. Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards Report any work-related injury, illness, incident or hazard Comply with HSE standards, policies, procedures & regulations Use appropriate personal protective equipment Promote interdependence by looking out for one another Correct hazards within your control and capabilities Recognize how your work may impact the environment and work to minimize the negative impact Engage in HSE Training Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards Raises issues to minimize cost and quality exposures Performs quality inspections Identifies and controls non-conforming material Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations Demonstrates a high level of competency in core work skills Achieves production goals Works at the required cycle time or defined engineering standard Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks Remains flexible and performs other miscellaneous duties, as required, to meet production goals Works with peers, skilled trades and support staff to maintain and identify equipment needing repair Teamwork Communicates effectively with the assigned team and with all support teams Completes training and personal development in line with business requirements Participates actively in ways to improve quality, safety, process, material flow, and employee development Assembly of Engine/ Genset as per plan Active participation in TBWS Hardworking and Team player Knowledge of Diesel engine fundamentals Ready to work in shifts Adherence to all safety PPEs and norms as per requirement

Job Summary: As part of a formal skilled trades training program, assists site Machinist skilled trades to learn and develop tool room skills in a manufacturing environment under direct guidance. Apprentice will be required to successfully complete and document specified classes and a minimum quantity of on the job training hours. Learns and understand the protocols of working safely with electricity and other energy sources with industrial equipment. Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Learns and applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Performs supervised work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Attends classes required to build basic tool room skills and knowledge to qualify as a Machinist. Completes all required on the job training hours. Repairs and maintains manufacturing equipment and other miscellaneous duties within their capabilities . Assists with preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints Solve problems and improve processes Participate in continuous improvement activities Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 2-3 years experience in machine shop and should have an engineering diploma in Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production

Job Summary: As part of a formal skilled trades training program, assists site Machinist skilled trades to learn and develop tool room skills in a manufacturing environment under direct guidance. Apprentice will be required to successfully complete and document specified classes and a minimum quantity of on the job training hours. Learns and understand the protocols of working safely with electricity and other energy sources with industrial equipment. Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Learns and applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Performs supervised work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Attends classes required to build basic tool room skills and knowledge to qualify as a Machinist. Completes all required on the job training hours. Repairs and maintains manufacturing equipment and other miscellaneous duties within their capabilities . Assists with preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints Solve problems and improve processes Participate in continuous improvement activities Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 2-3 years experience in machine shop and should have an engineering diploma in Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production

Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures & regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material. Delivery Operates manual and automated equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Demonstrates a high level of competency in core work skills. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair. Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development. External Qualifications and Competencies Competencies: Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Courage - Stepping up to address difficult issues, saying what needs to be said. Drives results - Consistently achieving results, even under tough circumstances. Ensures accountability - Holding self and others accountable to meet commitments. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Requires some work experience or intermediate level knowledge obtained through education, training or on-the-job experience. Additional Responsibilities Unique to this Position Skills Required:- Assembly of Engine/ Genset as per plan Active participation in TBWS Hardworking and Team player Knowledge of Diesel engine fundamentals Ready to work in shifts Adherence to all safety PPEs and norms as per requirement

Key Responsibilities Oversee daily operations of multiple production teams, ensuring adherence to safety, quality, and productivity standards. Manage team members, assign tasks, and monitor performance to meet production targets. Maintain a clean and organized work environment through effective housekeeping practices. Collaborate cross-functionally to improve safety, productivity, quality, and operational efficiency. Provide coaching, feedback, and mentorship to team members. Identify training needs and implement development plans. Analyze and improve Overall Equipment Effectiveness (OEE). Support strategic planning and operational execution. External Qualifications and Competencies Qualifications Bachelors degree in Engineering or a related field. College, university, or equivalent degree required. Licensing may be required for compliance with export controls or sanctions regulations. Additional Responsibilities Unique to this Position Experience Intermediate level of supervisory experience in a manufacturing or production environment. Proven track record in managing production targets and adapting to changing customer demands. Experience in team leadership, conflict resolution, and performance management. Familiarity with OEE metrics and continuous improvement methodologies. Strategic planning and operational execution experience is a plus. Skills Strong interpersonal and communication skills. Ability to lead diverse teams and foster collaboration. Proficient in analyzing production data and implementing improvements. Skilled in conflict management and decision-making. Competent in training and talent development.

Job Summary: The Facilities Technician HVAC/Mechanical Level II is responsible for supporting the maintenance and operation of facility systems, particularly HVAC and mechanical infrastructure, within a manufacturing or industrial environment. Working under moderate supervision and often as part of an apprenticeship or training program, this role involves performing preventive and corrective maintenance, troubleshooting system failures, and supporting facility improvement projects. The technician must comply with safety regulations, support asset reliability, and ensure facility operations align with organizational standards and customer needs. Key Responsibilities: Facilities Maintenance & Operation: Conduct preventive, predictive, and reactive maintenance on HVAC systems, air compressors, chillers, boilers, cooling towers, gas distribution systems, and mechanical utility infrastructure. Monitor and maintain utility systems such as STP/ETP, DG sets, pneumatic and filtration systems to ensure safe and continuous operations. Support facility infrastructure maintenance, including carpentry, plumbing, fabrication, and civil work. Use Building Management Systems (BMS) and maintenance software to track, assign, and document work orders. Assist with facility upgrade projects, asset replacements, and energy efficiency improvements. Troubleshooting & Diagnostics: Diagnose and repair malfunctioning HVAC/mechanical systems using standard tools and testing equipment. Evaluate system failures in real-time and apply corrective actions to minimize downtime. Ensure system components, such as motors, compressors, pumps, and fans, are operating at peak efficiency. Safety & Compliance: Adhere to Lockout/Tagout (LOTO) procedures and all industrial safety protocols. Conduct job safety assessments and identify potential hazards before performing work. Comply with Cummins Health, Safety, and Environmental (HSE) policies and contribute to a zero-incident workplace culture. Administrative & Project Support: Maintain maintenance documentation, prepare reports, and track facility performance indicators. Manage facility maintenance budgets and coordinate vendor services where needed. Participate in cross-functional teams and continuous improvement initiatives. Attend mandatory training and make progress toward certifications required by the apprenticeship or training program. External Qualifications and Competencies Core Competencies: Action Oriented Tackles tasks with urgency, energy, and focus. Collaborates Builds strong relationships and works well with others to meet shared objectives. Communicates Effectively Tailors communication for different audiences to ensure clarity and understanding. Customer Focus Keeps internal customers in mind, delivering solutions that enhance their experience. Decision Quality Makes sound, timely decisions that support operational continuity. Self-Development Seeks out learning opportunities to develop technical and professional skills. Values Differences Welcomes diverse perspectives and fosters an inclusive team environment. Technical Competencies: Emergency Preparedness Supports risk mitigation and readiness for events such as power failures, fires, and floods. Facilities Maintenance Assesses infrastructure condition and plans maintenance activities for long-term reliability. Facilities Operation Manages services such as lighting, HVAC, janitorial, and safety systems. Facility HVAC Technical Installs, troubleshoots, and maintains heating, ventilation, and cooling systems. Facility Electrical Technical Supports minor electrical maintenance activities in collaboration with other teams. Use of Maintenance Systems Proficient in using software tools for maintenance tracking and reporting. Qualifications: Education: High school diploma or equivalent required. Diploma in Mechanical Engineering or a related technical discipline preferred. Must meet eligibility criteria for regional apprenticeship or training program and pass any required entrance assessments. Certifications: HVAC, mechanical, or facility maintenance certifications are preferred but not mandatory at entry. Must be willing and eligible to complete formal certification requirements. Experience: 3-4 years of experience in plant facility and utility operations, including HVAC system maintenance. Exposure to preventive and predictive maintenance methodologies. Experience with breakdown response, system upgrades, and managing maintenance projects. Familiarity with safety procedures, especially in industrial and manufacturing settings. Skills: Proficient in Excel and presentation/reporting tools. Strong mechanical aptitude and troubleshooting skills. Ability to read mechanical, civil, and utility drawings. Good understanding of LOTO and industrial safety practices. Strong time management, organizational, and interpersonal skills. Physically able to work in challenging environments (heat, cold, confined spaces). Ability to handle budgets and basic inventory/spares planning. Work Environment & Conditions: Industrial/manufacturing setting with exposure to noise, temperature extremes, and operational hazards. Must be able to work flexible hours, including weekends or shifts if needed. Hands-on work involves climbing ladders, lifting tools/equipment, and working in confined or elevated spaces.

Key Responsibilities: Monthly Closing Activities & Variance Analysis: Perform monthly closing activities and variance analysis to ensure accurate financial reporting. Inventory Management - Inventory Valuation, Inventory Aging , Excess & obsolete Inventory, Inventory Reporting Product Cost Analysis & Reporting: Conduct product cost analysis and prepare related reports. Manufacturing Cost Analysis: Analyze manufacturing costs to identify areas for improvement. Audit Support: Assist in audit-related activities to ensure compliance and accuracy. Expense Management: Analyze managed expenses to drive planned improvements, achieve stretch targets, and validate cost savings projects related to manufacturing expenses. Financial Processes: Support daily financial processes, including purchase requisitions, invoice reconciliation, supplier payments, requests for checks, and addressing questions concerning monthly budget data. Special Projects: Participate in special projects as assigned and perform ad hoc reporting requests as needed. External Qualifications and Competencies Competencies: Action oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Decision quality - Making good and timely decisions that keep the organization moving forward. Instills trust - Gaining the confidence and trust of others through honesty, integrity, and authenticity. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Financial Analysis - Interprets financial data by analyzing trends, variances, opportunities and risks to provide insight to stakeholders regarding financial impact to drive business improvement; evaluates financial results against targets to communicate conclusions to all stakeholders; ensures integrity of financial data by investigating variances and determining corrective actions to resolve identified issues. Financial Reporting - Analyzes financial data by evaluating results and solutions to support business decisions; prepares and presents financial information by summarizing data to communicate results in compliance with regulations and stakeholder expectations; partners with stakeholders to drive financial performance that aligns to organizational goals and strategies. Education, Licenses, Certifications: ICWA Inter/CA Inter/MBA Finance & BCOM or M COM. Experience: 2+ years of relevant work experience or intermediate-level knowledge obtained through education, training, or on-the-job experience. Additional Responsibilities Unique to this Position Additional Responsibilities:- Reporting: Prepare basic reporting for management, including reviews for areas of emphasis and follow-up. Analyze basic financial data to support departmental budgets and forecasts. Explain expense variances and heighten spending awareness within the organization. Load actual and forecast data into the financial system. Financial Processes: Support other daily financial processes required for purchase requisitions, invoice reconciliation, supplier payments, requests for checks, and questions concerning monthly budget data. Participate in special projects as assigned and perform ad hoc reporting requests as needed.

The Electrical Maintenance Technician is responsible for maintaining, troubleshooting, and repairing CNC machines and robotic systems to ensure optimal equipment availability and performance. This role involves working with advanced automation systems, including PLCs, HMIs, and industrial robots, while adhering to Cummins safety, quality, and operational standards Key Responsibilities: Health, Safety & Environmental (HSE): Immediately report any injury hazards or incidents. Comply with all HSE standards, policies, and regulations. Use appropriate PPE and promote a culture of safety and interdependence. Participate in HSE training and continuous improvement initiatives. Quality & Maintenance: Perform electrical maintenance and troubleshooting on CNC machines and robotic systems. Conduct preventive, corrective, and predictive maintenance activities. Support equipment uptime and failure analysis. Follow diagrams, manuals, and specifications using appropriate tools and instruments. Maintain documentation and provide feedback for continuous improvement. Operations & Delivery: Execute electrical repairs in compliance with applicable codes and standards. Maintain clean and organized work areas. Schedule maintenance activities around production needs. Participate in TPM and continuous improvement initiatives. Teamwork & Communication: Collaborate effectively with cross-functional teams. Participate in training and development programs. Communicate issues and solutions clearly to peers and supervisors. External Qualifications and Competencies Qualifications: High school diploma or equivalent; technical certification preferred. Licensing may be required for compliance with export controls or local regulations Core Competencies: Collaborates: Works well in team environments. Communicates Effectively: Adapts communication to different audiences. Customer Focus: Delivers customer-centric solutions. Decision Quality: Makes timely and effective decisions. Drives Results: Achieves goals under pressure. Nimble Learning: Learns from both successes and failures. Values Differences: Embraces diverse perspectives and cultures. Functional Competencies: Health and Safety Fundamentals Controls Safety Electrical System Troubleshooting Factory Automation and Control Systems Machine Programming Manufacturing Knowledge Additional Responsibilities Unique to this Position Skills & Experience: Technical Skills: Hands-on experience with breakdown and troubleshooting of CNC machines. Strong knowledge of Siemens, Mitsubishi, and Fanuc CNC systems. Proficient in Siemens PLC and HMI programming. Familiar with SCADA systems, electrical logic, and VFDs. Experience with machine backup, upload/download, and understanding of machine sequences. Hands-on troubleshooting experience with KUKA and ABB robots. Robot programming experience is a plus. Knowledge of electronic measuring systems and devices.

Job Summary: Operates machines and production equipment in accordance with quality and productivity requirements safely in a manufacturing environment with limited guidance. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident, or hazard. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment (PPE). Promote interdependence by looking out for one another. Correct hazards within control and capabilities. Recognize how work may impact the environment and work to minimize the negative impact. Participate in HSE training. Quality: Follow all applicable standard work, process documentation, and quality procedures (e.g., Statistical Process Control (SPC), poka-yoke, and visual standards). Raise issues to minimize cost and quality exposures. Perform quality inspections and identify non-conforming material. Delivery: Operate manual and automated equipment to manufacture and assemble products to meet customer expectations. Demonstrate a high level of competency in core work skills and achieve production goals. Maintain clean and orderly work areas through routine housekeeping tasks. Perform planned operator care and maintenance tasks. Remain flexible and perform other miscellaneous duties as required to meet production goals. Teamwork: Communicate effectively with team members and support teams. Complete training and personal development in line with business requirements. Actively participate in improving quality, safety, process efficiency, material flow, and employee development. Key Competencies: Communicates effectively Deliver clear and tailored communication for different audiences. Courage Address difficult issues with confidence. Drives results Consistently achieving targets even under challenging circumstances. Ensures accountability – Holding self and others accountable to commitments. Values differences – Recognizing and appreciating diverse perspectives. Health and Safety Fundamentals – Championing proactive health and safety behaviors. Manufacturing Knowledge – Applying correct processes, equipment, and applications to support continuous improvement. Education, Licenses, and Certifications: High school diploma or equivalent required. Diploma in Electrical, Electronics, or Mechanical Engineering preferred. This position may require licensing for compliance with export controls or sanctions regulations. Experience: 2-4 years of experience in Engine/Genset Assembly and Testing required. Intermediate-level knowledge obtained through education, training, or on-the-job experience.

Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Learns and applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Performs supervised work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Attends classes required to build basic tool room skills and knowledge to qualify as a Machinist. Completes all required on the job training hours. Repairs and maintains manufacturing equipment and other miscellaneous duties within their capabilities . Assists with preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints Solve problems and improve processes Participate in continuous improvement activities Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. RESPONSIBILITIES Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Minimal or no work experience required. QUALIFICATIONS The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 2-3 years experience in machine shop and should have an engineering diploma in Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production

Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Minimal or no work experience required.

Job Summary: The Mechanical Maintenance - Level III role involves troubleshooting, assembling, installing, testing, and maintaining mechanical systems using necessary tools to ensure equipment availability and capability. The role requires an understanding of safety protocols while working with industrial equipment and the ability to work independently while coaching others. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident, or hazard. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for team members. Correct hazards within control and capabilities. Minimize environmental impact through safe work practices. Engage in HSE training. Quality: Apply high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Perform work according to diagrams, sketches, operation manuals, and specifications using various tools and measuring instruments. Provide feedback into the Preventive Maintenance system. Follow all process documentation and quality procedures. Raise issues to minimize cost and quality exposures. Perform quality inspections. Delivery: Perform troubleshooting, mechanical repairs, and maintenance of equipment. Instruct and coach others, acting as an informal resource for team members. Perform and document preventive, emergency, corrective, and predictive maintenance activities. Maintain a clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints. Schedule maintenance activities around production requirements. Solve problems and improve processes. Participate in continuous improvement activities. Teamwork: Communicate effectively with assigned and support teams. Complete training and personal development aligned with business requirements. Actively participate in local Total Productive Maintenance (TPM) teams to improve quality, safety, process, material flow, and employee development. Experience: Significant relevant work experience or specialized skills obtained through education, training, or on-the-job experience. Experience in continuous assembly lines for precision components manufacturing (Preferred). Hands-on experience in troubleshooting precision equipment, pneumatic and hydraulic systems, mechanical assembly, conveyor lines, servo systems, and testing equipment. Experience in machine mechanical maintenance, robot, and cobot maintenance. Skills: Basic understanding of PLC & HMI programming for troubleshooting (TIA Portal/Simatic Manager). Basic knowledge of data traceability systems with RFID and CMES. Ability to implement permanent solutions for recurring issues. Ability to improve Key Performance Indicators (KPIs) of maintenance processes.

Operate machines and production equipment in accordance with quality and productivity requirements safely in a manufacturing environment with direct guidance. This role involves working on a weekly shift rotational basis. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident, or hazard. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality: Follow all applicable standard work, process documentation, and quality procedures. Raise issues to minimize cost and quality exposures. Perform quality inspections. Identify and control non-conforming material. Delivery: Operate manual and automated equipment to manufacture and assemble products to meet customer expectations. Achieve production goals. Work at the required cycle time or defined engineering standard. Maintain a clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks. Perform planned operator care and maintenance tasks. Remain flexible and perform other miscellaneous duties as required to meet production goals. Work with peers, skilled trades, and support staff to maintain and identify equipment needing repair. Teamwork: Communicate effectively with the assigned team and all support teams. Complete training and personal development in line with business requirements. Participate actively in ways to improve quality, safety, process, material flow, and employee development. Experience: Minimum of 3 years of industry experience. Skills: Knowledge of OEE, 5S, FMEA, Control Plan, and Line Balancing is nice to have. Additional Information: This position may require licensing for compliance with export controls or sanctions regulations.

Job Summary: Operate machines and production equipment following quality and productivity standards in a safe manufacturing environment, receiving direct guidance and support as needed. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and report any major injury hazards immediately. Report any work-related injury, illness, incident, or hazard. Follow HSE standards, policies, procedures, and regulations; use personal protective equipment. Contribute to a safe environment by correcting hazards within control, recognizing environmental impacts, and engaging in HSE training. Quality: Follow all standard work, process documentation, and quality procedures. Raise issues to minimize cost and quality risks. Perform quality inspections, identify and control non-conforming materials. Delivery: Operate manual and automated equipment to meet required characteristics and dimensions. Meet production goals by working at the defined cycle time or engineering standard. Maintain a clean, orderly workspace through housekeeping tasks and planned operator care. Support equipment maintenance and work flexibly to meet production targets. Teamwork: Communicate effectively with team members and support staff. Engage in training and development as per business needs. Actively participate in quality, safety, process, material flow, and employee development improvements. External Qualifications and Competencies Competencies: Collaborates: Builds partnerships and works effectively with others to achieve shared goals. Communicates Effectively: Delivers communications tailored to different audiences. Customer Focus: Builds strong customer relationships and provides customer-centric solutions. Demonstrates Self-Awareness: Uses feedback and self-reflection to understand strengths and weaknesses. Nimble Learning: Adapts to new challenges, using both successes and failures as learning experiences. Self-Development: Seeks out growth opportunities and is open to formal and informal learning. Health and Safety Fundamentals: Proactively models and promotes health and safety practices. Values Differences: Recognizes and values diverse perspectives and cultural contributions. Qualifications: Education: Preferable Diploma in Electrical, Electronics, or Mechanical Engineering. Licenses/Certifications: May require licensing for compliance with export controls or sanctions. Experience: Work Experience: 2-4 years of experience in Engine/Genset assembly and testing preferred. Additional Responsibilities Unique to this Position Skills/Knowledge: Core Responsibilities: Perform Engine/Genset testing as per schedule. Troubleshoot and resolve quality issues as they arise. Actively participate in safety and quality initiatives. Maintain and improve workplace housekeeping. Contribute to continuous improvement projects (e.g., Kaizen, O tags). Technical Skills: Knowledge of diesel engine fundamentals. Understanding of electronic engines and engine wiring harnesses. Adherence to safety PPE and workplace safety norms.

Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and report any major injury hazards immediately. Report work-related injuries, illnesses, incidents, or hazards. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment (PPE). Engage in HSE training and promote a culture of safety by looking out for teammates. Quality Assurance: Follow standard work, process documentation, and quality procedures, including Statistical Process Control (SPC) and poka-yoke methods. Conduct quality inspections and identify non-conforming materials. Raise issues to minimize cost and quality risks. Production Delivery: Operate manual and automated equipment to manufacture and assemble products according to customer specifications. Demonstrate a high level of competency in core work skills and achieve production goals. Maintain a clean and orderly work area, performing routine housekeeping and equipment maintenance. Teamwork and Communication: Communicate effectively with team members and support staff. Participate in training and personal development in alignment with business requirements. Actively contribute to initiatives aimed at improving quality, safety, and process efficiency. External Qualifications and Competencies Competencies: Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Courage - Stepping up to address difficult issues, saying what needs to be said. Drives results - Consistently achieving results, even under tough circumstances. Ensures accountability - Holding self and others accountable to meet commitments. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Requires some work experience or intermediate level knowledge obtained through education, training or on-the-job experience. Additional Responsibilities Unique to this Position A person should be able to work in 3 shifts rotation. A person should be able to work on manual work stations and CNC machines.

Operate machines and production equipment following quality and productivity standards in a safe manufacturing environment, receiving direct guidance and support as needed. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and report any major injury hazards immediately. Report any work-related injury, illness, incident, or hazard. Follow HSE standards, policies, procedures, and regulations; use personal protective equipment. Contribute to a safe environment by correcting hazards within control, recognizing environmental impacts, and engaging in HSE training. Quality: Follow all standard work, process documentation, and quality procedures. Raise issues to minimize cost and quality risks. Perform quality inspections, identify and control non-conforming materials. Delivery: Operate manual and automated equipment to meet required characteristics and dimensions. Meet production goals by working at the defined cycle time or engineering standard. Maintain a clean, orderly workspace through housekeeping tasks and planned operator care. Support equipment maintenance and work flexibly to meet production targets. Teamwork: Communicate effectively with team members and support staff. Engage in training and development as per business needs. Actively participate in quality, safety, process, material flow, and employee development improvements. External Qualifications and Competencies Competencies: Collaborates: Builds partnerships and works effectively with others to achieve shared goals. Communicates Effectively: Delivers communications tailored to different audiences. Customer Focus: Builds strong customer relationships and provides customer-centric solutions. Demonstrates Self-Awareness: Uses feedback and self-reflection to understand strengths and weaknesses. Nimble Learning: Adapts to new challenges, using both successes and failures as learning experiences. Self-Development: Seeks out growth opportunities and is open to formal and informal learning. Health and Safety Fundamentals: Proactively models and promotes health and safety practices. Values Differences: Recognizes and values diverse perspectives and cultural contributions. Qualifications: Education: Preferable Diploma in Electrical, Electronics, or Mechanical Engineering. Licenses/Certifications: May require licensing for compliance with export controls or sanctions. Experience: Work Experience: 2-4 years of experience in Engine/Genset assembly and testing preferred. Additional Responsibilities Unique to this Position Skills/Knowledge: Core Responsibilities: Perform Engine/Genset testing as per schedule. Troubleshoot and resolve quality issues as they arise. Actively participate in safety and quality initiatives. Maintain and improve workplace housekeeping. Contribute to continuous improvement projects (e.g., Kaizen, O tags). Technical Skills: Knowledge of diesel engine fundamentals. Understanding of electronic engines and engine wiring harnesses. Adherence to safety PPE and workplace safety norms.

Operates machines and production equipment in accordance with quality and productivity requirements safely in a manufacturing environment with limited guidance. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident, or hazard. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and minimize the negative impact. Engage in HSE training. Quality: Follow all applicable standard work, process documentation, and quality procedures such as Statistical Process Control (SPC), poka-yoke, and visual standards. Raise issues to minimize cost and quality exposures. Perform quality inspections and identify non-conforming materials. Control non-conforming material. Delivery: Operate manual and automated equipment to manufacture and assemble products to meet customer expectations. Demonstrate a high level of competency in core work skills. Achieve production goals while working at the required cycle time or defined engineering standard. Maintain a clean and orderly work area, including routine housekeeping and machine cleaning tasks. Perform planned operator care and maintenance tasks. Remain flexible and perform other miscellaneous duties to meet production goals. Collaborate with peers, skilled trades, and support staff to maintain equipment and identify repair needs. Teamwork: Communicate effectively with the assigned team and support teams. Complete training and personal development in line with business requirements. Participate in improving quality, safety, process, material flow, and employee development. External Qualifications and Competencies Competencies: Communicates effectively : Developing and delivering communications that convey a clear understanding of the needs of different audiences. Courage : Stepping up to address difficult issues and saying what needs to be said. Drives results : Consistently achieving results even under tough circumstances. Ensures accountability : Holding self and others accountable to meet commitments. Health and Safety Fundamentals : Championing proactive health and safety behaviors to contribute to an injury-free workplace. Manufacturing Knowledge : Implementing changes in processes, equipment, and applications to contribute to continuous improvement. Values differences : Recognizing the value that different perspectives and cultures bring to an organization. Additional Responsibilities Unique to this Position Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education, or equivalent experience. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Requires some work experience or intermediate-level knowledge obtained through education, training, or on-the-job experience. Prefer in welding experience first

Job Summary: Operate machines and production equipment following quality and productivity standards in a safe manufacturing environment, receiving direct guidance and support as needed. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and report any major injury hazards immediately. Report any work-related injury, illness, incident, or hazard. Follow HSE standards, policies, procedures, and regulations; use personal protective equipment. Contribute to a safe environment by correcting hazards within control, recognizing environmental impacts, and engaging in HSE training. Quality: Follow all standard work, process documentation, and quality procedures. Raise issues to minimize cost and quality risks. Perform quality inspections, identify and control non-conforming materials. Delivery: Operate manual and automated equipment to meet required characteristics and dimensions. Meet production goals by working at the defined cycle time or engineering standard. Maintain a clean, orderly workspace through housekeeping tasks and planned operator care. Support equipment maintenance and work flexibly to meet production targets. Teamwork: Communicate effectively with team members and support staff. Engage in training and development as per business needs. Actively participate in quality, safety, process, material flow, and employee development improvements. External Qualifications and Competencies Competencies: Collaborates: Builds partnerships and works effectively with others to achieve shared goals. Communicates Effectively: Delivers communications tailored to different audiences. Customer Focus: Builds strong customer relationships and provides customer-centric solutions. Demonstrates Self-Awareness: Uses feedback and self-reflection to understand strengths and weaknesses. Nimble Learning: Adapts to new challenges, using both successes and failures as learning experiences. Self-Development: Seeks out growth opportunities and is open to formal and informal learning. Health and Safety Fundamentals: Proactively models and promotes health and safety practices. Values Differences: Recognizes and values diverse perspectives and cultural contributions. Qualifications: Education: Preferable Diploma in Electrical, Electronics, or Mechanical Engineering. Licenses/Certifications: May require licensing for compliance with export controls or sanctions. Experience: Work Experience: 2-4 years of experience in Engine/Genset assembly and testing preferred. Additional Responsibilities Unique to this Position Skills/Knowledge: Core Responsibilities: Perform Engine/Genset testing as per schedule. Troubleshoot and resolve quality issues as they arise. Actively participate in safety and quality initiatives. Maintain and improve workplace housekeeping. Contribute to continuous improvement projects (e.g., Kaizen, O tags). Technical Skills: Knowledge of diesel engine fundamentals. Understanding of electronic engines and engine wiring harnesses. Adherence to safety PPE and workplace safety norms.

Job Summary: Operate machines and production equipment following quality and productivity standards in a safe manufacturing environment, receiving direct guidance and support as needed. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and report any major injury hazards immediately. Report any work-related injury, illness, incident, or hazard. Follow HSE standards, policies, procedures, and regulations; use personal protective equipment. Contribute to a safe environment by correcting hazards within control, recognizing environmental impacts, and engaging in HSE training. Quality: Follow all standard work, process documentation, and quality procedures. Raise issues to minimize cost and quality risks. Perform quality inspections, identify and control non-conforming materials. Delivery: Operate manual and automated equipment to meet required characteristics and dimensions. Meet production goals by working at the defined cycle time or engineering standard. Maintain a clean, orderly workspace through housekeeping tasks and planned operator care. Support equipment maintenance and work flexibly to meet production targets. Teamwork: Communicate effectively with team members and support staff. Engage in training and development as per business needs. Actively participate in quality, safety, process, material flow, and employee development improvements. External Qualifications and Competencies Competencies: Collaborates: Builds partnerships and works effectively with others to achieve shared goals. Communicates Effectively: Delivers communications tailored to different audiences. Customer Focus: Builds strong customer relationships and provides customer-centric solutions. Demonstrates Self-Awareness: Uses feedback and self-reflection to understand strengths and weaknesses. Nimble Learning: Adapts to new challenges, using both successes and failures as learning experiences. Self-Development: Seeks out growth opportunities and is open to formal and informal learning. Health and Safety Fundamentals: Proactively models and promotes health and safety practices. Values Differences: Recognizes and values diverse perspectives and cultural contributions. Qualifications: Education: Preferable Diploma in Electrical, Electronics, or Mechanical Engineering. Licenses/Certifications: May require licensing for compliance with export controls or sanctions. Experience: Work Experience: 2-4 years of experience in Engine/Genset assembly and testing preferred. Additional Responsibilities Unique to this Position Skills/Knowledge: Core Responsibilities: Perform Engine/Genset testing as per schedule. Troubleshoot and resolve quality issues as they arise. Actively participate in safety and quality initiatives. Maintain and improve workplace housekeeping. Contribute to continuous improvement projects (e.g., Kaizen, O tags). Technical Skills: Knowledge of diesel engine fundamentals. Understanding of electronic engines and engine wiring harnesses. Adherence to safety PPE and workplace safety norms.

Operates machines and production equipment in accordance with quality and productivity requirements safely in a manufacturing environment with limited guidance. Key Responsibilities: Health, Safety & Environmental (HSE): Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident, or hazard. Comply with HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE training. Quality: Follow all applicable standard work, process documentation, and quality procedures such as Statistical Process Control (SPC), poka-yoke, and visual standards. Raise issues to minimize cost and quality exposures. Perform quality inspections. Identify and control non-conforming material. Delivery: Operate manual and automated equipment to manufacture and assemble products to meet customer expectations. Demonstrate a high level of competency in core work skills. Achieve production goals. Work at the required cycle time or defined engineering standard. Maintain a clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks. Perform planned operator care and maintenance tasks. Remain flexible and perform other miscellaneous duties, as required, to meet production goals. Work with peers, skilled trades, and support staff to maintain and identify equipment needing repair. Teamwork: Communicate effectively with the assigned team and all support teams. Complete training and personal development in line with business requirements. Participate actively in ways to improve quality, safety, process, material flow, and employee development. External Qualifications and Competencies Qualifications: Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Competencies: Communicates effectively: Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Courage: Stepping up to address difficult issues, saying what needs to be said. Drives results: Consistently achieving results, even under tough circumstances. Ensures accountability: Holding self and others accountable to meet commitments. Health and Safety Fundamentals: Champions and models proactive health and safety behaviors by identifying, reporting, and participating in actions to improve health and safety to build an interdependent culture and contribute to an injury-free workplace. Manufacturing Knowledge: Demonstrates knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Values differences: Recognizing the value that different perspectives and cultures bring to an organization. Additional Responsibilities Unique to this Position Skills and Experience: Knowledge/Skills: Assembly of Engine/Genset as per plan. Active participation in TBWS. Hardworking and team player. Knowledge of diesel engine fundamentals. Ready to work in shifts. Adherence to all safety PPEs and norms as per requirement. Experience: Requires some work experience or intermediate level knowledge obtained through education, training, or on-the-job experience.

1.Customer complaints for T1 & T2 cities where the material is being supplied 2.Do 100% QC checking, sorting & grading based on BB specifications manual for material arriving at the CC 3.Dump on CC material should be zero at DC 4.Coordinate with an Agronomist to understand field material quality and improve harvest quality 5.Drying process must be rigorously followed for all articles 6.Educate farmers on Bigbaskets quality to ensure required quality materials reach CC timely 7.Weekly quality benchmarking with local mandi materials vs CC materials

Conduct internal audits of departments such as Finance, Procurement, Stores, Production, and Sales. Evaluate the effectiveness of internal control systems and suggest improvements. Ensure compliance with applicable laws, rules, and regulations including GST, Income Tax, Companies Act, etc. Verify and reconcile financial records and operational reports. Prepare audit reports with findings and recommendations. Monitor inventory movements, procurement processes, and usage of consumables. Conduct surprise audits at various locations (factory, warehouses, etc.). Assist in implementation and monitoring of Standard Operating Procedures (SOPs). Coordinate with external auditors and provide required data. Identify areas of cost control and suggest cost-saving measures. Follow up on implementation of audit recommendations. Ensure accuracy in production reporting, recovery, yield analysis, and other operational KPIs.