Job Summary: We are seeking a skilled Mechanical Engineer with expertise in P&ID (Piping & Instrumentation Diagram) drafting using AutoCAD or Plant 3D, along with experience in hazardous area classification drawings per NFPA 2, IEC 60079, and ATEX standards. The ideal candidate will have strong technical knowledge of mechanical systems, process safety, and flammable material handling in industries such as oil & gas. Key Responsibilities: • Develop, modify and review P&IDS (Piping & Instrumentation Diagrams) using AutoCAD or Plant 3D. • Prepare hazardous area classification drawings in compliance with NFPA 2, IEC 60079, and other relevant standards. • Collaborate with process engineers, safety teams, and project managers to ensure P&IDs and hazardous area layouts meet regulatory and client requirements. • Apply zone classifications (Zone 0, 1, 2 / Division 1, 2) for flammable gas, vapor, and dust environments. • Ensure proper equipment selection (Ex-rated) and spacing in hazardous zones. • Perform design validation and troubleshoot discrepancies in P&IDs and hazardous area plans. • Generate GA (General Arrangement) drawings, and BOMs (Bill of Materials) as needed. • Participate in HAZOP, SIL, and LOPA studies related to process safety and hazardous area design. • Maintain documentation and version control for engineering drawings. • Support as-built updates and ensure proper handover to clients. Required Skills & Qualifications: • Bachelor’s degree in mechanical engineering, Chemical Engineering, or related field. • 3+ years of experience in P&ID drafting using AutoCAD and/or Plant 3D. • Proven experience in hazardous area classification drawings (NFPA 2, IEC 60079, ATEX etc). • Familiarity with industry standards (ISA 5.1, ASME B31.3, etc.). • Knowledge of 3D modeling (Plant 3D, AutoCAD MEP, or similar) is a plus. • Ability to interpret PFDs (Process Flow Diagrams) and convert them into detailed P&IDs. • Strong attention to detail and ability to work in a collaborative environment. • Excellent communication and documentation skills. Show more Show less

Job Summary: We are seeking a detail-oriented Mechanical Design Engineer proficient in AutoCAD 2D to produce precise technical drawings for piping, equipment, and structural layouts. The ideal candidate will have 2+ years of experience in mechanical drafting, knowledge of international standards, and the ability to collaborate with engineering teams to deliver accurate GA drawings, isometrics, and material take-offs. Experience with AutoCAD Plant 3D and piping specifications will be an advantage. Key Responsibilities: 1. Drafting & Design: • Create and revise 2D technical drawings (piping layouts, equipment arrangements, civil/structural details) using AutoCAD 2D. • Generate isometric drawings (ISO) and General Arrangement (GA) drawings. • Assist in plot plan development and piping system layouts. 2. Documentation & Compliance: • Verify Material Take-Off (MTO) and Bill of Materials (BOM) for accuracy. • Ensure all drawings comply with project specifications, international standards (ASME, ANSI, ISO), and safety regulations. • Maintain organized records of drawings and revisions. 3. Collaboration: • Work closely with engineers, designers, and other disciplines to align drawings with project requirements. • Participate in design reviews and implement feedback. 4. Quality Assurance: • Cross-check drawings for errors, clashes, or omissions. • Support as-built documentation and project handover. Required Skills & Qualifications: • Degree or Diploma in Mechanical Engineering or related field. • 2+ years of experience in mechanical drafting/design, preferably in oil & gas, chemical, or construction. • Proficiency in AutoCAD 2D (mandatory). • Knowledge of Piping Material Specifications (PMS) and piping components. • Familiarity with international drafting standards (ASME Y14.5, ISO 128). • Strong attention to detail and ability to interpret engineering sketches. • Communication Skills: Fluent in English (verbal/written). Preferred (Advantage): • Exposure to AutoCAD Plant 3D or other 3D modeling tools (e.g., CADWorx). • Basic understanding of P&IDs (Piping & Instrumentation Diagrams). • Awareness of piping fabrication/installation practices. Show more Show less

Job Summary We are seeking a skilled Senior Piping and 3D Design Engineer with expertise in process plant piping systems and proficiency in AutoCAD Plant 3D. The ideal candidate will be responsible for 3D modeling, piping design, and preparation of technical deliverables while ensuring compliance with international standards and project specifications. This role requires collaboration with multidisciplinary teams to deliver high-quality engineering solutions. Key Responsibilities • Perform 3D modeling using AutoCAD Plant 3D for civil/structural, piping, and equipment layouts. • Prepare and review piping design deliverables, including: o Piping & Tie-in Lists o Interface Matrices o Plot Plans & Piping Layouts o Isometric Drawings o Material Take-Off (MTO) / Bill of Materials (BOM) • Participate in 30%, 60%, and 90% 3D Model Reviews with stakeholders. • Collaborate with process, mechanical, and civil teams to ensure design integration. • Ensure compliance with project specifications, safety regulations, and international standards (e.g., ASME, ANSI, API). • Assist in piping stress analysis and resolve design conflicts. • Support Navisworks clash detection and AutoCAD Plant 3D model reviews. Required Skills & Qualifications: • Degree in Mechanical or Chemical Engineering. • 5+ years of experience in Process Plant Piping Engineering. • Proficient in AutoCAD Plant 3D (experience with Spec Editor preferred). • Familiarity with Navisworks for model reviews and clash detection. • Strong knowledge of Piping Material Specifications (PMS) and industry standards. • Basic understanding of piping stress analysis. • Excellent verbal and written communication skills. Preferred Qualifications • Experience in EPC (Engineering, Procurement, Construction) projects. • Knowledge of CAESAR II or similar stress analysis software. • Certification in AutoCAD Plant 3D or related tools. Work Environment • [Specify: Office-based / Site visits / Hybrid] • Collaborative team setting with multidisciplinary engineers. • Adherence to safety protocols and project deadlines. Show more Show less

Job Summary: We are looking for a skilled and motivated Electrical Design Engineer with a minimum of 3 years of experience to join our team. The ideal candidate will have a strong foundation in LV electrical design, power distribution, and extensive experience in designing for hazardous areas in compliance with NFPA 70 (NEC) and IEC 60079. This position involves preparing detailed electrical drawings, sizing and selecting electrical components, and ensuring design compliance with both functional and safety requirements for hydrogen facilities. Key Responsibilities: • Design and selection of MV/LV transformer, distribution panels, motor control panels and protection systems for industrial hydrogen applications. • Perform LV cable sizing and selection considering load analysis, voltage drop, ambient conditions, and derating factors. • Develop cable tray routing layouts, ensuring proper separation, support, and access in line with best practices and codes. • Design complete grounding systems, including grounding layout drawings (safety and instrument grounding), calculations, earthing pits, and bonding strategies according to local standards. • Develop and implement lightning protection systems, including layout drawings and material specifications per IEC 62305. • Design area lighting systems for hazardous and non-hazardous zones, including fixture selection, placement, and illumination levels. • Prepare service receptacle layouts and detailed drawings for utility and auxiliary power points across the site. • Generate comprehensive power distribution diagrams (SLDs, wiring schematics) for LV networks. • Prepare Bill of Materials (BOM) and perform detailed component selection for transformers, cables, trays, distribution boards, grounding systems, lighting, receptacles, and protective devices. • Ensure all electrical designs comply with: o NFPA 70 (NEC) – for US-based or NFPA-compliant projects o IEC 60079 – for hazardous area classification, equipment protection, and zoning Other relevant international and local codes (IEC, SEC, etc.) • Select and specify Ex-rated equipment (Ex d, Ex e, Ex n, Ex i, etc.) suitable for the identified hazardous zones. • Coordinate with instrumentation, process, and mechanical teams to ensure proper inter- discipline integration. • Support technical documentation, vendor evaluations, and procurement processes. Required Qualifications & Skills: • Bachelor’s Degree in Electrical Engineering or equivalent from an accredited university. • Minimum 3 years of experience in industrial electrical design and engineering. • Strong understanding of: o MV/LV transformer specification and protection o Cable sizing and power distribution o Cable tray design and routing o Grounding and lightning protection systems o Area and task lighting design • Solid experience in: o Hazardous area classification and compliance with NFPA 70 (NEC Article 500-516) and IEC 60079 series o Selection of Ex-certified electrical equipment • Proficiency in design tools such as AutoCAD 2D, AutoCAD Electrical, ETAP and Excel-based calculators • Knowledge of electrical safety, equipment spacing, clearances, and maintenance considerations in explosive environments. • Experience in preparing detailed construction drawings, BOMs, data sheets, and technical reports. • Excellent communication and coordination skills. Preferred Qualifications: • Experience in Hydrogen Refueling Station projects or similar explosive/hazardous environment facilities (e.g., oil & gas, chemical plants). • Familiarity with HAZOP, HAZID, or similar safety review processes. • Understanding of equipment zoning, IP/temperature class ratings • Familiarity with GCC regulations and local authority requirements (e.g., SEC, ARAMCO, ADNOC). • Familiar with Rivet software.

Job Summary: We are seeking a Senior Automation Engineer with strong expertise in PLC and SCADA programming to support Hydrogen Refueling Station (HRS) projects across the Gulf Cooperation Council (GCC) countries. This role involves developing automation systems using Siemens TIA Portal and WinCC, integrating field instrumentation, and participating in all phases from design to commissioning. The candidate should have hands-on experience with PLC and SCADA program development and have the capability to select appropriate PLC/SCADA hardware based on project requirements as well as working knowledge of Modbus RTU, Modbus TCP, OPC UA, and cybersecurity requirements for IT/OT systems. Travel for site commissioning and troubleshooting will be required as needed. Key Responsibilities: • Design and develop PLC programs using Siemens TIA Portal for HRS systems and subsystems. • Configure and implement SCADA/HMI systems using Siemens WinCC (Classic/Advanced/Unified). • Integrate and commission pressure, temperature, flow, and other field instruments including signal scaling, calibration validation, and loop testing. • Develop and execute loop check procedures, IO mapping, and functional testing during FAT/SAT. • Implement and troubleshoot communication interfaces using Modbus RTU, Modbus TCP/IP, and OPC UA. • Prepare and maintain technical documentation: IO Lists, Control Philosophy, FDS, wiring diagrams, and test reports. • Travel to site for commissioning, loop checks, and urgent system troubleshooting. • Apply cybersecurity best practices for automation networks, including secure configuration of networked PLC/SCADA systems. • Collaborate with cross-functional teams including process, instrumentation, mechanical, and IT engineers. • Provide technical support to engineering, procurement, and construction teams throughout project lifecycles. Required Qualifications & Skills: • Bachelor’s degree in Electrical, Electronics, Instrumentation, or Automation Engineering. • Minimum 4 years of experience in industrial automation and control systems. • Strong proficiency in Siemens TIA Portal (S7-1200/1500) and WinCC HMI/SCADA platforms. • Hands-on experience with industrial instrumentation (pressure, temperature, flow): scaling, calibration, and loop testing. • Familiarity with instrument wiring, signal conditioning, and analog/digital IO processing. • Working knowledge of Modbus RTU, Modbus TCP/IP, OPC UA, and integration of smart field devices. • Solid understanding of cybersecurity practices and standards applicable to IT/OT environments (e.g. IEC 62443). • Strong analytical and problem-solving abilities. • Willingness to travel across GCC countries for commissioning and support. • Excellent communication, documentation, and team collaboration skills. Preferred Qualifications: • Experience with Hydrogen Refueling Stations or other fuel/gas infrastructure projects. • Certification or formal training in Siemens automation systems. • Familiarity with industrial network architecture, switch configuration, and secure remote access. • Knowledge of SIL-rated instrumentation, SIS, or hazardous area design. • Familiar with Modicon EcoStruxure Work Conditions: • Remote/ Office-based work • Occasional travel to project sites within GCC (e.g. Saudi Arabia, Oman, UAE). • Travel and accommodation support for site assignments