Head - Finance & Manager - QA & PPC & QA Supervisors For Gummidipoondi

Job Description

1. HEAD FINANCE Position: Head Finance Manager Qualification: CA or ICWA Experience: minimum 2-3 years Budget: (As per company standard) Key Responsibilities: 1) Closing of Monthly Financial Accounting with all Schedules. 2) Monthly Financial MIS Preparation 3) Budget Preparation 4) Product Costing 5) Direct Taxation 6) GST Rules and Regulations 7) AR and AP 8) Coordinating with Auditor for yearend audit. 2. MANAGER - QUALITY ASSURANCE FOR QUALITY DEPARTMENT Position: Manager - Quality Assurance Qualification: B.E. / B.Tech. (Mech.) Experience: minimum 8-10 years Budget: (As per company standard) Key Responsibilities: 1) Metallurgical quality of the Final products (castings) delivered to the customers. 2) Process Control of inward receiving materials, core making, molding process, melting process, pouring and knock out. 3) Statistical Quality Control of the processes mentioned in Cl 2. 4) Calibration of Measuring and Testing Equipment. 5) Coordinate for preparing the ISO-9000-2015 and IATF 16949:2016 internal audit plan, schedule. 6) Conducting ISO9000-2015 and IATF 16949: 2016 Internal audit as per schedule. 7) Coordinate the ISO9000-2015 and IATF 16949:2016 Internal audit NC and getting actions, evidence with concerned persons 8) Inspect and certify the quality of incoming raw materials and consumables used for production. 9) Prepare SOP, inspect and ensure Process Parameters for the following. 10) Core sand for core making, coatings and finished cores. 11) Prepared Green sand and molds 12) Molten metal from Induction Melting Furnace 13) Inspect and ensure adherence to process parameters as per Control Plan while pouring and Knock Out. 14) Test the Metallurgical quality of the produced castings from each Batch (Heat) as per Sampling Plan and certify the quality of castings from each Batch. 15) Issue Test Certificate of Materials for each Batch of Finished castings with traceability to heat no and Invoice no. or as per Customer Requirement as the case may be. 16) Liaise with Customers regarding complaints due to Metallurgical deviations and solve the issues. 17) Organize and arrange for timely and periodic calibration of the measuring and test equipment. 18) Maintain record and monitor the calibration status of measuring and test equipment. AUTHORITIES: 19) Take decision on Customer Returned / Rejected Material. 20) Approve Incoming / Final Inspection Reports, Calibration Reports. 21) Stop production and implement corrective action in case of non- compliance of QMS or quality parameters. 22) Improve MIS Data & reference sample 3. JE / SUPERVISOR - PROCESS QUALITY- (QUALITY ASSURANCE Position: JE / Supervisor - Process Quality Qualification: Diploma in Mechanical Engineering or B.E. / B.Tech. (Mech.) Experience: 2 or 3 years in relevant field Budget: (CTC 25 K) Key Responsibilities 1) Receiving Inspection, In process inspection, Final Inspection/Report preparation 2) Approval of deviation which does not affect the customer requirements in consultation 3) Analysis of in-house Quality problem for corrective / preventive action coordination with Production 4) Participating in the Management Review Meeting 5) Preparation of inspection plan / Check list in connection with QC requirements 6) To stop production if there is serious quality problem / take corrective action when non-conformity is noticed / to inform 7) Corrective preventive action with supplier for incoming material quality related issues 8) Calibration of inspection and test measuring equipment. 4. Junior Engineer – Dimensional Accuracy (QA) Position: JE / Supervisor - QA Qualification: Diploma in Mechanical Engineering or B.E. / B.Tech. (Mech.) Experience: 2 or 3 years in relevant field Budget: (CTC 25 K) Key Responsibilities : 1) Dimensional conformance of New pattern equipment and New components. 2) Dimensional conformance of Existing pattern equipment and existing components. 3) Conformance to specification of molding and core making equipment. 4) Defect analysis and defect prevention of internally rejected castings and customer rejected castings. 5) Resolving customer complaints due to dimensional deviation at customer premises. 6) Lay out inspection of a) new pattern equipment b) New castings 7) Periodic inspection of existing pattern equipment as per inspection plan. 8) Periodic Lay Out inspection of current production components as per inspection plan 9) Design and preparation of gauges for Critical dimensional inspection for Final inspection of castings as and when required 10) Periodic inspection of Match plate bushes, mold box bushes, Mold box pins, mold process and core process equipment and inspection gauges for Final inspection 11) Defect analysis of rejected and rework-able castings defect-wise and initiating corrective preventive action to minimize rejections. 12) Defect analysis of rejected/rework-able castings from customers and co-ordinate with QMS personnel to fix the Root cause and initiate CAPA to enable QMS personnel to communicate to customer. 13) Record all corrections/alterations to pattern equipment in Pattern History Card. 14) Use ERP for maintaining data and records related to your job. 5. JE / Supervisor – PPC Key Responsibilities 1) To prepare monthly, weekly and daily production plan for molding, melting and 2) Core shop based on customer requirements. 3) To issue daily production plan, at least 24 hours in advance to the concerned 4) Departments. 5) To monitor the daily production and maintain the stock record of finished goods. 6) To plan monthly material requirement based on BOM and inform purchase 7) Department. 8) To ascertain the availability of cores, chills, sleeves, and other materials required 9) for moldings and core making before issuing the production plan. 10) To prepare MIS reports and inform concerned persons and management. 11) To attend weekly production meeting and maintain minutes of the meeting. 12) Co-ordinate with shop floors line supervisors for ensuring actual daily production Plan. 13) To coordinate with customer regarding production plan and inform customers 14) About daily production of castings. 15) To coordinate with customer regarding customer plan and inform customers 16) About daily dispatch of castings. 17) Co-ordinate with Dispatch team for ensuring the actual daily dispatch planning. 18) Follow outstanding payment from customer. Role & responsibilities